An evaluation of a new approach for the thermoplastic response of metal-matrix composites

1989 Arnold, 1990, Elastic/plastic analyses of advanced composites investigating the use of the compliant layer concept in reducing residual stresses resulting from processing Arnold, 1992, Reduction of thermal residual stresses in advanced metallic composites based upon a compensating/compliant layer concept, J. Compos. Mater, 26, 1287, 10.1177/002199839202600904 Arnold, 1992, Influence of engineered interfaces on residual stresses and mechanical response in metal matrix composites Barkalow, 1985, Advanced Coating R & D Benveniste, 1991, On the effective properties of composites with coated cylindrically orthotropic fibers, Mech. Mater, 12, 289, 10.1016/0167-6636(91)90025-U Bowman, R. (1992). Private communication. Materials Division, NASA Lewis Research Center, Cleveland, OH. Bufler, 1971, Theory of elasticity of a multilayered medium, J. Elasticity, 1, 125, 10.1007/BF00046464 Christensen, 1979, Solutions for effective shear properties in three phase sphere and cylinder models, J. Mech. Phys. Solids, 27, 315, 10.1016/0022-5096(79)90032-2 Derstine, 1989, Nonlinear response of composite tubes under combined thermo-mechanical loading, PVP-Vol. 174, 19 Dvorak, 1979, Elastic-plastic behavior of fibrous composites, J. Mech. Phys. Solids, 27, 51, 10.1016/0022-5096(79)90010-3 Dvorak, 1976, Thermal stresses in heat-treated fibrous composites, J. Appl. Mech, 98, 619, 10.1115/1.3423943 Dvorak, 1976, Axisymmetric plasticity theory of fibrous composites, Int. J. Engng Sci, 14, 361, 10.1016/0020-7225(76)90009-4 Hashin, 1962, The elastic moduli of heterogeneous materials, J. Appl. Mech, 29, 143, 10.1115/1.3636446 Hashin, 1990, Thermoelastic properties and conductivity of carbon/carbon fiber composites, Mech. Mater, 8, 293, 10.1016/0167-6636(90)90049-L Hill, 1965, Theory of mechanical properties of fibre-strengthened materials. II. Inelastic behavior, J. Mech. Phys. Solids, 12, 213, 10.1016/0022-5096(64)90020-1 Jansson, 1992, Reduction of thermal stresses in continuous fiber reinforced metal matrix composites with interface layers, J. Compos. Mater, 26, 1474, 10.1177/002199839202601005 Mendelson, 1983, 164 Mulhern, 1967, Cyclic extension of an elastic fibre with an elastic-plastic coating, J. Inst. Maths. Applics, 3, 21, 10.1093/imamat/3.1.21 Pindera, 1991, Local/global stiffness matrix formulation for composite materials and structures, Compos. Engng, 1, 69, 10.1016/0961-9526(91)90028-Q Pindera, 1992, The effect of matrix microstructure on the evolution of residual stresses in titanium aluminide composites, MD-Vol. 40, 37 Pindera, 1993, Effects of fiber and interfacial layer morphologies on the thermoplastic response of metal matrix composites, Int. J. Solids Structures, 30, 1213, 10.1016/0020-7683(93)90013-W Pindera, 1992, Effects of fiber and interfacial layer architectures on the thermoplastic response of metal matrix composites Sutcu, 1992, A recursive concentric cylinder model for composites containing coated fibers, Int. J. Solids Structures, 29, 197, 10.1016/0020-7683(92)90107-5 Warwick, 1991, Development of composite coaxial cylinder stress analysis model and its application to SiC monofilament systems, J. Mater. Sci, 26, 3817, 10.1007/BF01184978 Wawner, 1991, Investigation of the reaction kinetics between SiC fibers and selectively alloyed titanium matrices Williams, 1993, Effectiveness of graded interfacial layers in reducing residual stresses in titanium matrix composites