An equivalent model for mechanical analysis of single crystal cooled blade with film cooling holes using crystal plasticity

Hou, 2007, Crystallographic failure analysis of film near cooling hole under temperature gradient of nickel-based single crystal superalloys, Theor Appl Fract Mech, 47, 164, 10.1016/j.tafmec.2006.11.007

Hou, 2008, Creep life analysis around film hole of nickel-based single crystal cooling blade, Rare Met Mater Engng, 37, 625

Slot, 1971, Effective elastic constants for thick perforated plates with square and triangular penetration patterns, J Engng Ind, 93, 935, 10.1115/1.3428087

Sanchez-Palencia, 1980

Benssousan, 1978

Cioranescu, 1979, Homogenization in open sets with holes, J Math Anal Appl, 71, 590, 10.1016/0022-247X(79)90211-7

Ghosh, 1995, Multiple scale analysis of heterogeneous elastic structures using homogenization theory and voronoi cell finite element method, Int J Solids Struct, 32, 27, 10.1016/0020-7683(94)00097-G

Wu, 1999, A homogenization theory for time-dependent nonlinear composites with periodic internal structures, Int J Solids Struct, 36, 4991, 10.1016/S0020-7683(98)00236-4

Hassani, 1998, A review of homogenization and topology optimization I – homogenization theory for media with periodic structure, Comput Struct, 69, 707, 10.1016/S0045-7949(98)00131-X

Taylor, 1938, Plastic strain in metals, Metals, 62, 307

Taylor, 1923, The distortion of an aluminum crystal during a tensile test, Proc Royal Soc, 102A, 643, 10.1098/rspa.1923.0023

Taylor, 1925, The plastic extension of fracture of aluminum crystal, Proc Royal Soc, 108A, 643

Yue, 2007

Yue, 2005, Surface roughness evolution under constant amplitude fatigue loading using crystal plasticity, Engng Fract Mech, 72, 749, 10.1016/j.engfracmech.2004.06.001

Kalidindi, 1992, Crystallographic texture evolution in bulk deformation processing of FCC metals, J Mech Phys Solids, 40, 537, 10.1016/0022-5096(92)80003-9

Hibbit. ABAQUS Version 5.8 user’s manual. Michigan: Carlson & Sorensen Inc.; 1999.