An efficient synthesis of bio-based Poly(urethane-acrylate) by SiO2-Supported CeCl3·7H2O–NaI as recyclable Catalyst

Kojima, 2021, Synthesis of semicrystalline long chain aliphatic polyesters by ADMET copolymerization of dianhydro-D-glucityl bis(undec-10-enoate) with 1,9-decadiene and tandem hydrogenation, Catalysts, 11, 1098, 10.3390/catal11091098 Soller, 2014, Catalytic precision polymerization: rare earth metal-mediated synthesis of homopolymers, block copolymers, and polymer brushes, Macromol. Chem. Phys., 215, 1946, 10.1002/macp.201400271 Bielski, 2021, Furan platform chemicals beyond fuels and plastics, Green Chem., 23, 7458, 10.1039/D1GC02402G Pastore, 2021, A new and efficient lactic acid polymerization by multimetallic cerium complexes: a poly(lactic acid) suitable for biomedical applications, RSC Adv., 11, 10592, 10.1039/D0RA10637B Gabrielli, 2021, Chemical and mechanical characterization of licorice root and palm leaf waste incorporated into poly(urethane-acrylate) (PUA), Molecules, 26, 7682, 10.3390/molecules26247682 Zhao, 2018, The preparation and properties of polyurethane/nano-CeO2 hybrid aqueous coating, Polym. Sci., 60, 671 Cai, 2021, CeO2 grafted carbon nanotube via polydopamine wrapping to enhance corrosion barrier of polyurethane coating, Corrosion Sci., 178, 10.1016/j.corsci.2020.109014 Alferov, 2019, One-pot synthesis of dimethyl hexane-1,6-diyldicarbamate from CO2, methanol; and diamine over CeO2 catalysts: a route to an isocyanate-free feedstock for polyurethanes, ACS Sustainable Chem. Eng., 7, 10708, 10.1021/acssuschemeng.9b01345 Bartoli, 2010, Applications of CeCl3 as an environmental friendly promoter in organic chemistry, Chem. Rev., 110, 6104, 10.1021/cr100084g Cheng, 2015, A comparison between Ce(III) and Ce(IV) ions in photocatalytic degradation of organic pollutants, J. Rare Earths, 33, 249, 10.1016/S1002-0721(14)60411-7 Zia, 2007, Methods for polyurethane and polyurethane composites, recycling and recovery: a review, React. Funct. Polym., 67, 675, 10.1016/j.reactfunctpolym.2007.05.004 Rusu, 2020, An insight into the structural diversity and clinical applicability of polyurethanes in biomedicine, Polymers, 12, 1197, 10.3390/polym12051197 X. Jin, N. Guo, Z. You, Y. Tan, Design and performance of polyurethane elastomers composed with different soft segments, Materials 13 (2020), 4991. DOI: 10.3390/ma13214991. Furtwengler, 2018, Renewable polyols for advanced polyurethane foams from diverse biomass resources, Polym. Chem., 9, 4258, 10.1039/C8PY00827B Akindoyo, 2016, Polyurethane types, synthesis and applications – a review, RSC Adv., 6, 114453, 10.1039/C6RA14525F Szczepanczyk, 2021, Recent developments in polyurethane-based materials for bone tissue engineering, Polymers, 13, 946, 10.3390/polym13060946 Sultana, 2012, Modification of cellulosic fiber with polyurethane acrylate copolymers. Part I: physicochemical properties, Carbohydr, Polymer, 87, 397 Wang, 2011, Preparation and rapid degradation of nontoxic biodegradable polyurethanes based on poly(lactic acid)-poly(ethylene glycol)-poly(lactic acid) and L-lysine diisocyanate. Part I: physicochemical properties, Polym. Chem., 2, 601, 10.1039/C0PY00235F Bolognesi, 2001, Carcinogenic risk of toluene diisocyanate and 4,4'-methylenediphenyl diisocyanate: epidemiological and experimental evidence, Crit. Rev. Toxicol., 31, 737, 10.1080/20014091111974 Marzec, 2017, Development of polyurethanes for bone repairPart I: physicochemical properties, Mater. Sci. Eng. C, 80, 736, 10.1016/j.msec.2017.07.047 Bengtström, 2016, The role of isocyanates in fire toxicity, Fire Sci. Rev., 5, 1, 10.1186/s40038-016-0013-2 Konieczny, 2019, Green polyurethanes from renewable isocyanates and biobased white dextrins, Polymers, 11, 256, 10.3390/polym11020256 Pepe, 2021, Lysine-oligoether-modified electrospun poly(carbonate urethane) matrices for improving hemocompatibility response, Polym. J., 53, 1393, 10.1038/s41428-021-00534-7 Chuayjuljit, 2010, Preparation and properties of palm oil-based rigid polyurethane nanocomposite foams, J. Reinforc. Plast. Compos., 29, 218, 10.1177/0731684408096949 Bernardini, 2015, Flexible polyurethane foams green production employing lignin or oxypropylated lignin, Eur. Polym. J., 64, 147, 10.1016/j.eurpolymj.2014.11.039 Noreen, 2016, Preparation and properties of palm oil-based rigid polyurethane nanocomposite foams, Prog. Org. Coating, 91, 25, 10.1016/j.porgcoat.2015.11.018 Han, 2009, Synthesis and characterization of biodegradable polyurethane based on poly(ε-caprolactone) and L-lysine ethyl ester diisocyanate, Front. Mater. Sci. China, 3, 25, 10.1007/s11706-009-0013-4 Noor, 2016, Comparison of adipic versus renewable azelaic acid polyester polyols as building blocks in soft thermoplastic polyurethanes, J. Am. Oil Chem. Soc., 93, 1529, 10.1007/s11746-016-2903-9 Hu, 2019, Synthesis and properties of UV-curable polyfunctional polyurethane acrylate resins from cardanol, ACS Omega, 4, 12505, 10.1021/acsomega.9b01174 Czachor-Jadacka, 2021, Progress in development of UV curable powder coatings, Prog. Org. Coating, 158, 106355, 10.1016/j.porgcoat.2021.106355 Decker, 2002, Kinetic study and new applications of UV radiation curing, Macromol. Rapid Commun., 26, 1067, 10.1002/marc.200290014 Kim, 1996, Preparation and properties of UV-curable polyurethane acrylates, J. Appl. Polym. Sci., 60, 799, 10.1002/(SICI)1097-4628(19960509)60:6<799::AID-APP2>3.0.CO;2-E Xu, 2021, CO2-triggered hydrophobic/hydrophilic switchable waterborne polyurethane–acrylate with simultaneously improved water resistance and mechanical properties, J. Coating Technol. Res., 18, 989, 10.1007/s11998-021-00476-y Kunwong, 2011, Curing behavior of a UV-curable coating based on urethane acrylate oligomer: the influence of reactive monomers, Songklanakarin J. Sci. Technol., 33, 201 Khasraghi, 2019, Bio-based UV curable polyurethane acrylate: morphology and shape memory behaviors, Eur. Polym. J., 118, 514, 10.1016/j.eurpolymj.2019.06.019 El-Molla, 2007, Synthesis of polyurethane acrylate oligomers as aqueous UV-curable binder for inks of ink jet in textile printing and pigment dyeing, Dyes Pigments, 74, 371, 10.1016/j.dyepig.2006.02.021 Tanzi, 1994, Cytotoxicity of some catalysts commonly used in the synthesis of copolymers for biomedical use, J. Mater. Sci. Mater. Med., 5, 393, 10.1007/BF00058971 Tran, 2021, Heterogeneous double metal cyanide catalyzed synthesis of poly(ε-caprolactone) polyols for the preparation of thermoplastic elastomers, Catalysts, 11, 1033, 10.3390/catal11091033 Sheikh, 2000, Isocyanate-terminated urethane prepolymer as bioadhesive base material: synthesis and characterization, Int. J. Adhesion Adhes., 20, 299, 10.1016/S0143-7496(99)00060-3 Bartoli, 2003, The CeCl3·nH2O/NaI system in organic synthesis: an efficient water tolerant Lewis acid promoter, Synlett, 14, 2101, 10.1055/s-2003-42098 Bartoli, 2007, SiO2-Supported CeCl3·7H2O−NaI Lewis acid promoter: investigation into the garcia gonzalez reaction in solvent-free conditions, J. Org. Chem., 72, 6029, 10.1021/jo070384c Chen, 2011, Well-defined polyamide synthesis form diisocyanates and diacids involving hindered carbodiimide intermediates, Macromolecules, 44, 46, 10.1021/ma1022378 Nowick, 1992, An improved method for the synthesis of enantiomerically pure amino acid ester isocyanates, J. Org. Chem., 57, 7364, 10.1021/jo00052a069 Bartoli, 2004, Investigation into the allylation reactions of aldehydes promoted by the CeCl3·7H2O−NaI system as a Lewis acid, J. Org. Chem., 67, 1290, 10.1021/jo035542o Newland, 2010, A highly effective gene delivery vector – hyperbranched poly(2-(dimethylamino)ethyl methacrylate) from in situ deactivation enhanced ATRP, Chem. Commun. (J. Chem. Soc. Sect. D), 46, 4698, 10.1039/c0cc00439a Hatada, 1990, Unambiguous 13C-NMR assignments for isocyanate carbons of isophorone diisocyanate and reactivity of isocyanate groups in Z - and E-stereoisomers, J. Polymer Sci.: A Polymer Chem., 28, 3019