An automated time–frequency approach for ultrasonic monitoring of fastener hole cracks

Thompson, 1985, Ultrasonics in nondestructive evaluation, Proc IEEE, 73, 1716, 10.1109/PROC.1985.13367 Boller, 2000, Next generation structural health monitoring and its integration into aircraft design, Int J Systems Sci, 31, 1333, 10.1080/00207720050197730 Keller, 2001, Real-time nondestructive evaluation of airframe structures for health monitoring and residual life prediction, vol. 1 Chiou, 1991, Ultrasonic detection of cracks below bolts in aircraft skins, vol. 10B Sargent, 1997, Ultrasonic imaging of cracks around fastener holes, Insight, 39, 790 Herzog, 2001, Inspection of fastener holes using ultrasonic phased arrays, vol. 21 Mal, 2005, NDE of rivet holes in aging aircraft components using Lamb waves, vol. 3397 Chang, 1999, Scattering of Lamb waves from a rivet hole with edge cracks, Mech Mater, 31, 197, 10.1016/S0167-6636(98)00060-X Fromme, 2002, Detection of cracks at rivet holes using guided waves, Ultrasonics, 40, 199, 10.1016/S0041-624X(02)00137-3 Giurgiutiu, 2004, Damage identification in aging aircraft structures with piezoelectric wafer active sensors, J Intell Mat Systems Struct, 15, 673, 10.1177/1045389X04038051 Mi, 2006, An ultrasonic method for dynamic monitoring of fatigue crack initiation and growth, J Acoust Soc Am, 119, 74, 10.1121/1.2139647 Michaels, 2006, An ultrasonic angle beam method for in situ sizing of fastener hole cracks, J Nondestructive Eval, 25, 3, 10.1007/s10921-006-0002-9 Michaels, 2007, Ultrasonic sensing and life prediction for the DARPA structural integrity prognosis system, vol. 26B Rose, 1999 Silk, 1976, Determination of crack penetration using ultrasonic surface waves, NDT Int, 9, 290, 10.1016/0308-9126(76)90071-7 Yew CH, Chen KG, Wang DL. An experimental study of interaction between surface waves and a surface breaking crack, J Acoust Soc Am 1984; 75(1): 189–96 Cheeke, 2002 Rose, 1988, Utility of split-spectrum processing in ultrasonic nondestructive evaluation, Mater Eval, 46, 114 Karpur, 1991, Improved detectability of fatigue microcracks by split spectrum processing of backscattered Rayleigh waves, vol. 10A Case, 1996, Flaw identification from time and frequency features of ultrasonic waveforms, IEEE Trans Ultrasonics, Ferroelectronics, Frequency Control, 43, 592, 10.1109/58.503719 Polikar, 1998, Frequency invariant classification of ultrasonic weld inspection signals, IEEE Trans Ultrasonics, Ferroelectronics, Frequency Control, 45, 614, 10.1109/58.677606 Michaels, 2004, A comparison of feature-based classifiers for ultrasonic structural health monitoring, vol. 5394 Solanki, 2003, Finite element analysis of plasticity-induced fatigue crack closure: an overview, Eng Fract Mech, 71, 149, 10.1016/S0013-7944(03)00099-7 Simandjuntak, 2006, Three dimensional finite element prediction of crack closure and fatigue crack growth rate for a corner crack, Int J Fatigue, 28, 335, 10.1016/j.ijfatigue.2005.07.034 Nagy, 1994, Weep hole inspection by circumferential creeping waves, NDTE&E Int, 27, 131, 10.1016/0963-8695(94)90604-1 Aldrin, 2005, Spiral creeping waves in ultrasonic angled-beam shear wave inspection of fastener holes in multilayer structures, vol. 25A