An assessment of stereological techniques with application to the martensite transformation

Underwood, 1970, Quantitative Stereology, 5 Howard, 1947, Quantitative metallography by point count and lineal analysis, Trans. AIME, 172, 413 Gladman, 1960, The accuracy of point counting in metallographic investigation, J. Iron Steel Inst., 194, 189 Hilliard, 1961, An evaluation of procedures in quantitative metallography for volume fraction analysis, Trans. AIME, 221, 344 Clark, 1962, An assessment of two metallographic techniques for estimation of bainite in steel, J. Iron Steel Inst., 200, 395 Hilliard, 1962, Grain size estimation, General Electric Res. Lab. Rep. 62-RL-3133M Hilliard, 1966, Sampling error in the estimation of grain edge length, Trans. AIME, 236, 589 Chen, 1976, Martensite plate arrangements in 01 tool steel, Met. Trans. A, 7, 1177, 10.1007/BF02656601 Chen, 1978, The size of martensite plates in 01 tool steel, Met. Trans. A, 9, 1659, 10.1007/BF02661949 Guimaraes, 1978, A metallographic study of the influence of the austenite grain size on martensite kinetics in Fe-31.9 Ni-0.02C, Acta Met., 26, 1591, 10.1016/0001-6160(78)90068-8 Guimaraes, 1979, Microstructural aspects of martensite transformation in coarse-grained Fe-31.1 Pct Ni-0.02 Pct C, Met. Trans. A, 10, 109, 10.1007/BF02686413 Leal, 1981, Microstructure evaluation during mechanically induced martensitic transformation in Fe-31% Ni-0.1% C, Mater. Sci. Eng., 48, 249, 10.1016/0025-5416(81)90009-4 McMurtrie, 1970, The average volume of martensite plates during transformation, Met. Trans., 1, 3185, 10.1007/BF03038436 Marder, 1970, Microcracking sensitivity in FeC plate martensite, Met. Trans., 1, 1545, 10.1007/BF02641999 Davis, 1972, Microcracking in ferrous martensite, Met. Trans., 3, 307, 10.1007/BF02680610 Mendiratta, 1972, The development of martensitic microstructure and microcracking in an Fe-1.86 C alloy, Met. Trans., 3, 1755, 10.1007/BF02642557 Chang, 1981 Hilliard, 1976, Assessment of sampling errors in stereological analysis, 59 Krauss, 1971, The morphology of martensite in iron alloys, Met. Trans., 2, 2343, 10.1007/BF02814873 P. H. Chang, P. G. Winchell, and G. L. Liedl, Quantitative geometric characterization of high carbon martensite, submitted to Met. Trans.