An approximate procedure for estimating the member demands in mid-rise reinforced concrete buildings
Tóm tắt
Từ khóa
Tài liệu tham khảo
Applied Technology Council (ATC) (1996) ATC 40: the seismic evaluation and retrofit of concrete buildings, Redwood City, CA
American Society of Civil Engineers (ASCE) (2000) Prestandard and commentary for the seismic rehabilitation of buildings. Prepared for the SAC Joint Venture, published by the American Society of Civil Engineers, Reston, VA
American Society of Civil Engineers (ASCE) (2017) Seismic evaluation and retrofit of existing buildings. ASCE/SEI 41–17, Reston, VA
Applied Technology Council (ATC) (2005) FEMA-440: improvement of nonlinear static seismic analysis procedures. ASCE SEI, Redwood City, pp 41–17
Binici B, Yakut A, Ozcebe G, Erenler A (2015) Provisions for the seismic risk evaluation of existing reinforced concrete buildings in turkey under the urban renewal law. Earthq Spectra 31(3):1353–1370
Chopra AK, Goel RK (2002) A modal pushover analysis procedure for estimating seismic demands for buildings. Earthq Eng Struct Dyn 31(3):561–582
Chopra AK, Goel RK (2004) A modal pushover analysis procedure to estimate seismic demands for unsymmetrical-plan buildings. Earthq Eng Struct Dyn 33(8):903–927
Comité Européen de Normalisation (CEN) (2005) Eurocode 8: design provisions for earthquake resistance of structures, European Prestandard ENV-Part: 3 Assessment and retrofitting of existing buildings. European Prestandard, Brussels
DeJong MJ, Hendriks MAN, Rots JG (2008) Sequentially linear analysis of fracture under non-proportional loading. Eng Fract Mech 75(18):5042–5056
Disaster and Emergency Management Presidency (DEMP) (2018) Turkish building earthquake code. Official Gazette, No. 30364, Ankara, Turkey
Fajfar P (2000) A nonlinear analysis method for performance based seismic design. Earthq Spectra 16(3):573–592
Federal Emergency Management (FEMA 356) (2000) Prestandard and commentary for the seismic rehabilitation of buildings. ASCE, Washington, DC
Gulkan P, Sozen MA (1974) Inelastic response of reinforced concrete structures to earthquake motions. ACI J 71(6):604–610
Gunay MS, Sucuoglu H (2010) An improvement to linear-elastic procedures for seismic performance assessment. Earthq Eng Struct Dyn 39:907–931
Karsan ID, Jirsa JO (1969) Behaviour of concrete under compressive loading. J Struct Div ASCE 95(12):2543–2563
Kim SP, Kurama YC (2008) An alternative pushover analysis procedure to estimate seismic displacement demands. Eng Struct 30(12):3793–3807
Kowalsky MJ, Priestley MJN, MacRae GA (1995) Displacement-based design of RC bridge columns in seismic regions. Earthq Eng Struct Dyn 24(12):1623–1643
Kreslin M, Fajfar P (2011) The extended N2 method taking into account higher mode effects in elevation. Earthq Eng Struct Dyn 40(14):1571–1589. https://doi.org/10.1002/eqe.1104
Moehle JP (2014) Seismic design of reinforced concrete buildings. McGraw-Hill, New York, p 760
Ministry of Environment and Urbanization (MEU) (2013) Guidelines for seismic assessment of buildings under high risk, Official Gazette, No. 28695. Ankara, Turkey
Newmark NM, Hall WJ (1982) Earthquake spectra and design. Earthquake Engineering Research Institute, Berkeley, p 103
OpenSees (2018) Open system for earthquake engineering simulation. Pacific Earthquake Engineering Research Center. http://opensees.berkeley.edu
Paret TF, Irfanoglu A, Hachem MM, Freeman S (2004) Efficient application of the secant method for capturing the peak response of complex multi-story buildings. In: 13th WCEE, paper no: 1658, Vancouver, Canada
Park H, Eom T (2005) Direct inelastic earthquake design using secant stiffness. ASCE J Struct Eng 131(9):1355–1362
Poursha M, Khoshnoudian F, Moghadam AS (2009) A consecutive modal pushover procedure for estimating the seismic demands of tall buildings. Eng Struct 31(2):591–599
Poursha M, Khoshnoudian F, Moghadam AS (2014) The extended consecutive modal pushover procedure for estimating the seismic demands of two-way unsymmetric-plan tall building structures under influence of two horizontal components of ground motions. J Soil Dyn Earthq Eng 63:162–173
Poursha M, Amini MA (2015) A single-run multi-mode pushover analysis to account for the effect of higher modes in estimating the seismic demands of tall buildings. Bull Earthq Eng 13(8):2347–2365
Priestley MJN, Calvi GM, Kowalsky MJ (2007) Displacement-based seismic design of structures. IUSS Press, Pavia, p 721
Rots JG (2001). Sequentially linear continuum model for concrete fracture. In: 4th International conference on fracture mechanics of concrete structures, Cachan, France, pp 831–839