An ANFIS based approach for predicting the weld strength of resistance spot welding in artificial intelligence development
Tóm tắt
Artificial intelligence (AI) is a modern approach which has the ability to capture nonlinear relationships and interaction effects. Frequently, AI methods have been used by researchers to predict output responses of the Resistance spot welding (RSW) due to the complex- ity during the welding process and numerous interferential factors, especially the short-time property of the process. The present study is to investigate the weld strength of spot weld for high strength steel sheets of CR780 using the Adaptive neuro fuzzy inference system (ANFIS). These results were compared with those obtained by conventional Artificial neural network (ANN). The input parameters were extracted through the dynamic resistance signal which was obtained from the primary circuit of the welding machine. Both the ANN and ANFIS models were utilized for the formulation of mathematical model with an off-line dynamic resistance response of the RSW at a particular parameters setting. The performances of both models were compared in terms of correlation coefficient value (R), Root mean squared error (RMSE), and Mean absolute percentage error (MAPE). While both methods were capable of predicting the weld strength, it was found that ANFIS model could predict more precisely than ANN.
Tài liệu tham khảo
K. I. Johnson and J. C. Needham, New design of resistance spot welding machine for quality control, Weld J., 11 (1972) 122–131.
Y. J. Cho and S. Rhee, New technology for measuring dynamic resistance and estimating strength in resistance spot welding, Meas. Sci. Technol., 11 (2000) 1173–1178.
W. Zhang, Recent advances and improvements in the simulation of resistance welding processes, Welding in the World, 50 (3) (2006) 29–37.
M. Muneo, T. Koichi and O. Kenji, Development of next generation resistance spot welding technologies contributing to auto body weight reduction, JFE Technical Report, 18 (2013) 32–37.
M. Jou, Real time monitoring weld quality of resistance spot welding for the fabrication of sheet metal assemblies, J. Mater. Process Tech., 132 (1-3) (2003) 102–113.
S. Aslanlar, A. Ogur, U. Ozsarac and E. Ilhan, Welding time effect on mechanical properties of automotive sheets in electrical resistance spot welding, J. Mater. Des., 29 (7) (2008) 1427–1431.
X. Zhao, Y. Zhang and G. Chen, Model optimization of artificial neural networks for performance predicting in spot welding of the body galvanized DP steel sheets, International Conference on Computing, Networking and Communications (ICNC), Part I, LNCS, 4221 (2006) 602–605.
Y. J. Cho and S. Rhee, Quality estimation of resistance spot welding by using pattern recognition with neural networks, IEEE T Instrum. Meas., 53 (2) (2004) 330–334.
Y. K. Liu, W. J. Zhang and Y. M. Zhang, Neuro-fuzzy based human intelligence modeling and robust control in gas tungsten arc welding process, American Control Conference (ACC) (2013) 5631–5636
B. N. Panda, M. V. A. Raju Babhubalendruni, B. B. Biswal and D. S. Rajput, Application of artificial intelligence methods to spot welding of commercial aluminum sheets (B.S. 1050), Proceedings of Fourth International Conference on Soft Computing for Problem Solving, Adv. Intel. Sys. Comput., 335 (2015) 21–32.
V. Gunaraj and N. Murugan, Application of response surface methodology for predicting weld bead quality in submerged arc welding of pipes, J. Mater. Process Tech., 88 (1-3) (1999) 266–275.
I. S. Kim, C. E. Park, Y. J. Jeong and J. S. Son, Development of an intelligent system for selection of the process variables in gas metal arc welding processes, Int. J. Adv. Manuf. Tech., 18 (2) (2001) 98–102.
D. Zhao, Y. Wang, S. Sheng and Z. Lin, Multi- objective optimal design of small scale resistance spot welding process with principal component analysis and response surface methodology, J. Intell. Manuf., 25 (6) (2014) 1335–1348.
Y. K. Liu and Y. M. Zhang, Model-based predictive control of weld penetration in gas tungsten arc welding, IEEE T Contr. Syst. T, 22 (3) (2014) 955–966.
D. Zhao, Y. Wang, X. Wang, F. Chen and D. Liang, Process analysis and optimization for failure energy of spot welded titanium alloy, Mater. Design, 60 (2014) 479–489.
R. W. Messler, M. Jou Jr. and C. J. Li, An intelligent control system for resistance spot welding using neural network and fuzzy logic, IEEE Industry Applications Conference IAS 30th Annual Meeting, Orlando, 2 (1995) 1757–1763.
Y. J. Cho, Y. J. Kim and S. H. Rhee, Development of a quality estimation model using multivariate analysis during resistance spot welding, P I Mech. Eng. BJ Eng., 215 (11) (2001) 1529–1538.
S. R. Lee, Y. J. Choo, T. Y. Lee, M. H. Kim and S. K. Choi, A quality assurance technique for resistance spot welding using a neuro-fuzzy algorithm, J. Manuf. Syst., 20 (5) (2001) 320–328.
N. Akkas, D. Karayel, S. S. Ozkan, A. Ogur and B. Topal, Modeling and analysis of the weld bead geometry in submerged arc welding by using adaptive neuro fuzzy inference system, Math. Probl. Eng. (2013) 1–10
S. A. Gedeon, C. D. Sorensen, K. T. Ulrich and T. W. Eagar, Measurement of dynamic electrical and mechanical properties of resistance spot welds, Weld J., 66 (1987) 378–385.
Y. J. Cho and S. H. Rhee, Primary circuit dynamic resistance monitoring and its application to quality estimation during resistance spot welding, Weld J., 81 (2002) 104–111.
Y. S. Zhang, H. Wang, G. L. Chen and X. Q. Zhang, Monitoring and intelligent control of electrode wear based on a measured electrode displacement curve in resistance spot welding, Meas. Sci. Technol., 18 (2007) 867–876.
G. Xu, J. Wen and C. Wang, Quality monitoring for resistance spot welding using dynamic signals, Proceedings of the 2009 IEEE, International Conference on Mechatronics and Automation (2009) 2495–2499
J. S. R. Jang, Adaptive-network-based fuzzy inference system (ANFIS), IEEE International Conference on System, Man, and Cybernetics, 23 (3) (1993) 665–685.
M. A. Denai, F. Palis and A. Zeghbib, ANFIS based modeling and control of non-linear Systems, IEEE International Conference on Systems, Man, and Cybernetics, 4 (2004) 3433–3438.
M. Sugeno, An introductory survey of fuzzy control, Inform Sciences, 36 (1-2) (1985) 59–83.
E. Rezaei, A. Karami, T. Yousefi and S. Mahmoudinezhad, Modeling the free convection heat transfer in a partitioned cavity using ANFIS, Int. Commun. Heat Mass, 39 (3) (2012) 470–475.
M. Hayati, A. M. Rashidi and A. Rezaei, Prediction of grain size of nanocrystalline nickel coatings using adaptive neuro-fuzzy inference system, Solid State Sci., 13 (1) (2011) 163–167.
MathWorks, Fuzzy logic toolbox user’s guide, Natick: Inc, 3 Apple Hill Drive (2012) 137–179
J. Yu, A. Y. Sohn, Y. W. Park and J. S. Kwak, The development of a quality prediction system for aluminium laser welding to measure plasma intensity using photodiodes, J. Mech. Sci. and Tech., 30 (10) (2016) 4697–4704.
J. Doh, S. U. Lee and J. Lee, Back-propagation neural network- based approximate analysis of true stress-strain, J. Mech. Sci. and Tech., 30 (3) (2016) 1233–1241.