Airworthiness of composite repairs: Failure mechanisms

1991, Federal Aviation Administration Advisory Circular 25.1529-1, Instructions for Continued Airworthiness of Structural Repairs on Transport Airplanes 1984, Federal Aviation Administration Advisory Circular 20-107A, Composite Aircraft Structures 1986, Federal Aviation Administration Advisory Circular 25.571-1A, Damage Tolerance and Fatigue Evaluation of Structures 1994, Joint Airworthiness Committee Paper 1312 Molent, 1989, Design of an all boron epoxy doubler for the F-111C wing pivot fitting: structural aspects, J Composite Struct., 11, 57, 10.1016/0263-8223(89)90030-5 Molent, 1994, Thermo-mechanical analysis of bonded repaired skin splice joint test specimens, Aeronautical Research Laboratory, Technical Report 24, ARL-TR-24 Baker, 1988 Molent, 1992, Structural aspects of the design of an all boron epoxy reinforcement for the F111C wing pivot fitting: final report, ARL, Aircraft Structures Report 436 Thrall, 1979, Primary adhesively bonded structure technology (PABST): design handbook for adhesive bonding, USAF Technical Report, AFFDL-TR-79-3119 Jones, 1988, Bonded repair of metallic components: thick sections, J Theor. Appl. Fracture Mech., 9, 61, 10.1016/0167-8442(88)90049-3 MACAIR Report LMA03.02-002R, Final Report F/A-18 inner wing torque box assembly (PTO1). Van Blaricum, 1989, An experimental investigation into the effect of impact damage on the compressive strength of step lap joints, Engng Fracture Mech., 32, 667, 10.1016/0013-7944(89)90165-3 Baker, 1984, Repair of Mirage III aircraft using BFRP crack patching technology, Theor. Appl. Fracture Mech., 2, 1, 10.1016/0167-8442(84)90035-1 Federal Aviation Administration Advisory Circular 91-56, 1981, Supplementary Structural Inspection Program for Large Transport Category Airplanes Kaye, 1991, Cold proof load test of a boron/epoxy reinforced F-111C wing pivot fitting, Aeronautical Research Laboratory, Aircraft Structures Technical Memorandum 542, ARL-STRUC-TM-542