Air cooled lithium-ion battery with cylindrical cell in phase change material filled cavity of different shapes

Zhang, 2016, A novel aluminum–graphite dual-ion battery, Adv. Energy Mater., 6, 1502588, 10.1002/aenm.201502588 Zhang, 2022, A fast and stable sodium-based dual-ion battery achieved by Cu3P@ P-doped carbon matrix anode, J. Power Sources, 518, 10.1016/j.jpowsour.2021.230741 Li, 2022, Concentrated electrolyte for high-performance ca-ion battery based on organic anode and graphite cathode, Angew. Chem. Int. Ed., 61 Mu, 2021, Molecular grafting towards high-fraction active nanodots implanted in N-doped carbon for sodium dual-ion batteries, Nat. Sci. Rev., 8 Shah, 2016, Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells, J. Power Sources, 330, 167, 10.1016/j.jpowsour.2016.08.133 Zhang, 2022, Morphology controllable synthesis of heteroatoms-doped carbon materials for high-performance flexible supercapacitor, Dyes Pigm., 199, 10.1016/j.dyepig.2021.109968 Jin, 2021, Failure prediction, monitoring and diagnosis methods for slewing bearings of large-scale wind turbine: A review, Measurement, 172, 10.1016/j.measurement.2020.108855 He, 2015, Experimental demonstration of active thermal control of a battery module consisting of multiple Li-ion cells, Int. J. Heat Mass Transf., 91, 630, 10.1016/j.ijheatmasstransfer.2015.07.069 van Roosmalen, 2021, A review of prefabricated self-sufficient facades with integrated decentralised HVAC and renewable energy generation and storage, Energy Build., 248, 10.1016/j.enbuild.2021.111107 Huo, 2015, The numerical investigation of nanofluid based cylinder battery thermal management using lattice boltzmann method, Int. J. Heat Mass Transf., 91, 374, 10.1016/j.ijheatmasstransfer.2015.07.128 Li, 2022, 3D printed high performance silver mesh for transparent glass heaters through liquid sacrificial substrate electric-field-driven jet, Small Li, 2022, Directly printed embedded metal mesh for flexible transparent electrode via liquid substrate electric-field-driven jet, Adv. Sci. Tran, 2014, Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery, Appl. Therm. Eng., 63, 551, 10.1016/j.applthermaleng.2013.11.048 Saeed, 2021, Analysis of the unsteady thermal response of a li-ion battery pack to dynamic loads, Energy, 231, 10.1016/j.energy.2021.120947 Wang, 2018, Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage, Nat. Chem., 10, 667, 10.1038/s41557-018-0045-4 Wang, 2022, An excellent adsorptive TiO2@ yV2O5 (y= 0.025–0.045) bifunctional composite endowing high sulfur loading as cathode material for lithium-sulfur batteries, J. Alloys Compd., 902, 10.1016/j.jallcom.2021.162650 Khateeb, 2005, Thermal management of li-ion battery with phase change material for electric scooters: experimental validation, J. Power Sources, 142, 345, 10.1016/j.jpowsour.2004.09.033 Rao, 2014, Experimental study of an OHP-cooled thermal management system for electric vehicle power battery, Exp. Thermal Fluid Sci., 57, 20, 10.1016/j.expthermflusci.2014.03.017 Al-Saadi, 2013, Modeling phase change materials embedded in building enclosure: a review, Renew. Sust. Energ. Rev., 21, 659, 10.1016/j.rser.2013.01.024 Mirzaei, 2012, Modeling of phase change materials for applications in whole building simulation, Renew. Sust. Energ. Rev., 16, 5355, 10.1016/j.rser.2012.04.053 Wu, 2022, Large-scale fabrication of flexible EPDM/MXene/PW phase change composites with excellent light-to-thermal conversion efficiency via water-assisted melt blending, Compos. A: Appl. Sci. Manuf., 152, 10.1016/j.compositesa.2021.106713 Said, 2022, Recent advances on improved optical, thermal, and radiative characteristics of plasmonic nanofluids: Academic insights and perspectives, Sol. Energy Mater. Sol. Cells, 236, 10.1016/j.solmat.2021.111504 Li, 2019, Numerical study on thermal performance of PCM Trombe Wall, Energy Procedia, 158, 2441, 10.1016/j.egypro.2019.01.317 Babapoor, 2015, Thermal management of a li-ion battery using carbon fiber-PCM composites, Appl. Therm. Eng., 82, 281, 10.1016/j.applthermaleng.2015.02.068 Qu, 2014, Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material, Int. J. Hydrog. Energy, 39, 3904, 10.1016/j.ijhydene.2013.12.136 Chen, 2021, Fracture predictions based on a coupled chemo-mechanical model with strain gradient plasticity theory for film electrodes of Li-ion batteries, Eng. Fract. Mech., 253, 10.1016/j.engfracmech.2021.107866 Duan, 2010, Heat transfer in phase change materials for thermal management of electric vehicle battery modules, Int. J. Heat Mass Transf., 53, 5176, 10.1016/j.ijheatmasstransfer.2010.07.044 Jia, 2022, Lubrication-enhanced mechanisms of titanium alloy grinding using lecithin biolubricant, Tribol. Int., 169, 10.1016/j.triboint.2022.107461 Zhang, 2015, Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding, Int. J. Adv. Manuf. Technol. Bouhal, 2018, CFD thermal energy storage enhancement of PCM filling a cylindrical cavity equipped with submerged heating sources, J. Energy Storage, 18, 360, 10.1016/j.est.2018.05.015 Lv, 2016, Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins, Appl. Energy, 178, 376, 10.1016/j.apenergy.2016.06.058 Zhang, 2018, Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air, J. Clean. Prod. Li, 2022, Electrochemical detection of nitrate with carbon nanofibers and copper co-modified carbon fiber electrodes, Compos. Commun., 29, 10.1016/j.coco.2021.101043 Mills, 2005, Simulation of passive thermal management system for lithium-ion battery packs, J. Power Sources, 141, 307, 10.1016/j.jpowsour.2004.09.025 Schweitzer, 2015, Experimental validation of a 0-D numerical model for phase change thermal management systems in lithium-ion batteries, J. Power Sources, 287, 211, 10.1016/j.jpowsour.2015.04.016 Jiang, 2017, Experiment and simulation of thermal management for a tube-shell Li-ion battery pack with composite phase change material, Appl. Therm. Eng., 120, 1, 10.1016/j.applthermaleng.2017.03.107 Ling, 2015, A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling, Appl. Energy, 148, 403, 10.1016/j.apenergy.2015.03.080 Afrand, 2016, The variations of heat transfer and slip velocity of FMWNT-water nano-fluid along the micro-channel in the lack and presence of a magnetic field, Physica E, 84, 474, 10.1016/j.physe.2016.07.013 Gao, 2019, Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants, Tribol. Int., 131, 10.1016/j.triboint.2018.10.025 Yang, 2019, Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions, Ceramics International, 45 Wang, 2018, Processing characteristics of vegetable oil-based nanofluid MQL for grinding different workpiece materials, Int. J. Precis. Eng. Manuf. Green Technol., 10.1007/s40684-018-0035-4 Yan, 2020, Sensitivity of adhesive and cohesive intermolecular forces to the incorporation of MWCNTs into liquid paraffin: experimental study and modeling of surface tension, J. Mol. Liq., 310, 10.1016/j.molliq.2020.113235 Pordanjani, 2019, An updated review on application of nanofluids in heat exchangers for saving energy, Energy Convers. Manag., 198 Pordanjani, 2021, Nanofluids: physical phenomena, applications in thermal systems and the environment effects-a critical review, J. Clean. Prod., 320, 10.1016/j.jclepro.2021.128573 Samimi, 2016, Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers, Energy, 96, 355, 10.1016/j.energy.2015.12.064 Lin, 2015, Experiment and simulation of a LiFePO4 battery pack with a passive thermal management system using composite phase change material and graphite sheets, J. Power Sources, 275, 742, 10.1016/j.jpowsour.2014.11.068 Deng, 2018, Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: a review, Appl. Therm. Eng., 142, 10, 10.1016/j.applthermaleng.2018.06.043 Xia, 2017, A review on battery thermal management in electric vehicle application, J. Power Sources, 367, 90, 10.1016/j.jpowsour.2017.09.046 Swiderska-Mocek, 2020, Flammability parameters of lithium-ion battery electrolytes, J. Mol. Liq., 318, 10.1016/j.molliq.2020.113986 Väyrynen, 2012, Lithium ion battery production, J. Chem. Thermodyn., 46, 80, 10.1016/j.jct.2011.09.005 Bernardi, 1985, A general energy balance for battery systems, J. Electrochem. Soc., 132, 5, 10.1149/1.2113792 Wu, 2017, Determination of the optimum heat transfer coefficient and temperature rise analysis for a lithium-ion battery under the conditions of Harbin city bus driving cycles, Energies, 10, 1723, 10.3390/en10111723 Biwole, 2013, Phase-change materials to improve solar panel's performance, Energy Build., 62, 59, 10.1016/j.enbuild.2013.02.059 Dhaidan, 2013, Experimental and numerical investigation of melting of NePCM inside an annular container under a constant heat flux including the effect of eccentricity, Int. J. Heat Mass Transf., 67, 455, 10.1016/j.ijheatmasstransfer.2013.08.002 Wang, 2022, Numerical solution of traveling waves in chemical kinetics: time fractional fishers equations, Fractals Zhao, 2021, A fuzzy-based strategy to suppress the novel coronavirus (2019-NCOV) massive outbreak, Appl. Comput. Math. Ejaz, 2021, Concentrated photovoltaics as light harvesters: Outlook, recent progress, and challenges, Sustainable Energy Technol. Assess., 46 Chu, 2022, Combined impact of Cattaneo-Christov double diffusion and radiative heat flux on bio-convective flow of Maxwell liquid configured by a stretched nano-material surface, Appl. Math. Comput., 419 Zhao, 2021, Artificial neural networking (ANN) analysis for heat and entropy generation in flow of non-Newtonian fluid between two rotating disks, Math. Methods Appl. Sci. Song, 2015, Optimal evaluation of a Toader-type mean by power mean, J. Inequal. Appl., 10.1186/s13660-015-0927-6 Chu, 2021, Enhancement in thermal energy and solute particles using hybrid nanoparticles by engaging activation energy and chemical reaction over a parabolic surface via finite element approach, Fractal Fract., 5, 10.3390/fractalfract5030119 Nazeer, 2022, Theoretical study of MHD electro-osmotically flow of third-grade fluid in micro channel, Appl. Math Comput., 420 Iqbal, 2022, Study on date–jimbo–kashiwara–miwa equation with conformable derivative dependent on time parameter to find the exact dynamic wave solutions, Fractal Fract., 6, 10.3390/fractalfract6010004 Wang, 2020, Inequalities for generalized trigonometric and hyperbolic functions with one parameter, J. Math. Inequal., 10.7153/jmi-2020-14-01 Yang, 2016, Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack, Int. J. Therm. Sci., 108, 132, 10.1016/j.ijthermalsci.2016.05.009 Mashayekhi, 2020, Development of hybrid cooling method with PCM and Al2O3 nanofluid in aluminium minichannels using heat source model of li-ion batteries, Appl. Therm. Eng., 178, 10.1016/j.applthermaleng.2020.115543