Ageing in modified bitumen using FTIR spectroscopy

International Journal of Pavement Engineering - Tập 17 Số 7 - Trang 565-577 - 2016
M. R. Nivitha1, Edamana Prasad2, J. Murali Krishnan1
1Department of Civil Engineering, Indian Institute of Technology Madras, Chennai600036, India
2Department of Chemistry, Indian Institute of Technology Madras, Chennai600036, India

Tóm tắt

Từ khóa


Tài liệu tham khảo

Anderson, D.A. and Bonaquist, R., 2012. Investigation of short-term laboratory aging of neat and modified asphalt binders. Washington, DC: Transportation Research Board, NCHRP Report 709.

ASTM D2872, 2012. Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). West Conshohocken, PA: ASTM International.

ASTM D6521, 2013. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). West Conshohocken, PA: ASTM International.

Bahia, H.U. and Anderson, D.A., 1995. The pressure aging vessel (PAV): A test to simulate rheologieal changes due to field aging. In: J.C.Hardin, ed. Physical properties of asphalt cement binders, No. 1241 in ASTM – Special Technical Publications, 67–88.

Bahia H.U., 1994, Journal of the Association of Asphalt Paving Technologists, 63, 414

Bahia, H.U., et al. 2001. Characterization of modified asphalt binders in superpave mix design. Washington, DC: National Cooperative Highway Research Program, NCHRP Report 459.

10.1080/10916469708949669

Branthaver, J.F., et al. 1993. Binder characterization and evaluation, volume 2: Chemistry. Washington, DC: Strategic Highway Research Program, National Research Council, Technical Report, SHRP-A-368.

10.1021/ef000190z

10.1016/j.compositesb.2010.09.009

10.1016/j.polymdegradstab.2004.05.006

10.1021/ie9906215

10.1016/j.conbuildmat.2011.10.021

10.1021/ef050166r

10.1016/j.fuel.2010.04.035

10.1080/08843759308916059

Heitzman M., 1992, Transportation Research Record, 1339, 1

10.1016/0016-2361(95)00039-8

10.1021/ie00035a033

10.1080/14680629.2008.9690108

IS15462:2004, 2004. Indian standard for polymer and rubber modified bitumen. New Delhi: Bureau of Indian Standards.

IS73:2013, 2013. Indian standard for paving bitumen – fourth revision. New Delhi: Bureau of Indian Standards.

Isayev, A.I., 2013. Chapter 15 – Recycling of rubbers. In: J.E.Mark, B.Erman and C.M.Roland, eds. The science and technology of rubber. 4th ed.Boston: Academic Press, 697–764.

10.5254/1.3535936

10.1016/S0032-3861(97)00583-1

10.1016/S0016-2361(00)00121-6

10.1016/S0003-2670(01)01235-1

10.3141/1586-08

10.1016/S0016-2361(97)00283-4

10.1002/app.31407

10.1021/ef0202687

10.1016/j.fuel.2007.06.029

10.1520/STP18192S

10.1016/S0016-2361(01)00211-3

10.1021/ac60351a037

Petersen J.C., 1986, Transportation Research Record, 1096, 1

Petersen, J.C., 2009. A review of the fundamentals of asphalt oxidation. Washington, DC: Transportation Research Board, Transportation Research Circular E-C140.

10.1016/j.eurpolymj.2005.05.034

10.1016/j.jcis.2004.08.043

10.1016/j.conbuildmat.2013.09.007

10.1061/(ASCE)0899-1561(2010)22:2(153)

Silverstein, R.M., Bassler, G.C., and Morrill, T.C., 1981. Spectrometric identification of organic compounds: 6th (sixth) Edition. 4th edn. Chichester: Wiley.

Smith, B.C., 1998. Infrared spectral interpretation: a systematic approach. CRC Press.

10.1081/LFT-200048186

10.1016/j.conbuildmat.2007.12.007

10.1002/app.27764

10.1016/S0142-9418(01)00086-1

10.1016/j.conbuildmat.2008.05.004

10.3141/1530-07

10.1016/j.jhazmat.2010.06.061