Advances in the science and technology of paints, inks and related coatings

Perrier S, ‘Developments in polymer architecture and design applicable to surface coatings’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 235–40, 2004 Figovsky O L, L Shapovalov and O Axenov, ‘Advanced coatings based upon non-isocyanate polyurethanes for industrial applications’,Surface Coatings International Part B: Coatings Transactions,87, 83–90, 2004 Pavlov D, I Glavchev, N Gospodinova and T Totev, ‘Preparation and application of polyesters: Activity of catalysts for esterification’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 273–6, 2004 Zvonkina I J and J T Guthrie, ‘A monitoring system for reflectance measurement during the wet-to-dry conversion of a coating formulation’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 249–52, 2004 Owen M J, ‘A review of significant directions in fluorosiloxane coatings’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 71–6, 2004 Galli G, L Andruzzi, E Chiellini, X Li, C K Ober, A Hexemer and E J Kramer, ‘Structural organisations in polystyrene-based semifluorinated block copolymers for low surface energy coatings’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 77–82, 2004 Poggio T, V Kapeliouchko, V Arcella and E Marchese, ‘Advances in fluoropolymer dispersions’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 51–6, 2004 Weinert R J, J E Robbins, D Woodland and R Medsker, ‘Surface improvements in coatings using polyfluorooxetane-modified polyesters’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 159–65, 2004 Kiatkamjornwong S and W Yusabai, ‘Effect on epoxy resin-silane on physical properties of coated films on steel surfaces’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 149–57, 2004 Uyanik N, M Karadayi and C Erbil, ‘Studies on thermal and morphological characteristics of siloxane containing epoxy resins cured by microwave radiation’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 91–6, 2004 Lork A, ‘Silicone resin emulsion coatings: The strength profile of the silicone resin network in paint microstructures’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 41–6, 2004 Paul K C, A K Pal, A K Ghosh and N R Chakaborty, ‘Measurements of elastic properties of some coating materials’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 47–50, 2004 Paul K C, A K Pal, A K Ghosh and N R Chakraborty, ‘Thermal measurements of coating films used for surface insulation and protection’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 137–41, 2004 Hernández L S, L A Hernández-Alvarado, O Domínguez and A A Torres, ‘Evaluation of the anticorrosive behaviour of organic coatings applied on a Zn-21 Al-2 Cu alloy’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 1–6, 2004 Yang X F and S G Croll, ‘Accelerated exposure of pigmented anti-corrosion coating systems’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 7–13, 2004 Malshe V C and S Elango, ‘Substituted benzotriazole as UV absorber for paints’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 277–84, 2004 Jewell E H, T C Claypole and D T Gethin, ‘The effect of exposure to inks and solvents on squeegee performance’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 253–60, 2004 Manning A N and R C Thompson, ‘De-inking of thick film UV-cured coatings using high intensity ultrasound’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 21–6, 2004 Liu X, J T Guthrie and C Bryant, ‘A study of the relevance of the plate quality and print quality to UV flexographic folding carton printing’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 167–74, 2004 Burrows R, R S Davidson and D R Illsley, ‘Multifunctional photoinitiators (MFPIs): A new concept’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 127–35, 2004 Petry V and D J Kent, ‘The effect of UV-curable formulations and matting agents on lacquer properties’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 103–9, 2004 Zeren S and S Huguenard, ‘UV-curable powder coatings: Formulation of thick white finish for MDF’, Surface Coatings International Part B: Coatings Transactions, 87, (B2), 97–101, 2004 Simmons G C and C Lowe, ‘A study on the adhesion and flexibility in radiation-cured coil coatings’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 33–40, 2004 Gaylarde P M, M A Shirakawa, V John, W Gambale and C C Gaylarde, ‘Statistical analysis of fungicide activity in paint films on two buildings’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 261–4, 2004 Di Ionno L, and P J Messier, ‘Iodinated thermal-fused polymer as a biocidal additive to commercial and chemical-resistant coatings’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 265–72, 2004 Jirous-Rajkovic V, A Bogner and D Radovan, ‘The efficiency of various treatments in protecting wood surfaces against weathering’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 15–19, 2004 Jirous-Rajkovic V, H Turkulin and E R Miller, ‘Depth profile of UV-induced wood surface degradation’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 241–8, 2004 Kataoka Y, M Kiguchi and P D Evans, ‘Photodegradation depth profile and penetration of light in Japanese cedar earlywood (Cryptomeria japonica D.Don) exposed to artificial solar radiation’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 187–93, 2004 Suttie E and J Ekstedt, ‘Evaluation of a method to determine discoloration of points on wood due to tannin staining from knots’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 57–61, 2004 Nussbaum R M, ‘The effect of processing and treatment parameters on the discoloration of painted joinery due to resin exudation from knots’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 181–6, 2004 Petric M, B Kricej, M Humar, M Pavlic and M Tomazic, ‘Patination of cherry wood and spruce wood with ethanolamine and surface finishes’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 195–201, 2004 Hora G, ‘Improving wet adhesion of water-borne acrylic dispersion on wood by bond activation’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 175–9, 2004 Grüll G, T Anderl and A Teischinger, ‘Wood moisture content of coated wood/aluminium windows Part 1: Reactions to exterior humidity stress’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 111–9, 2004 Grüll G and T Anderl, ‘Wood moisture content of coated wood/aluminium windows. Part 2: Reactions to interior humidity stress’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 203–10, 2004 Strömberg L and J Ekstedt, ‘Integrated life-cycle design of coatings on exterior wood. Part 1: Service life planning’,Surface Coatings International Part B: Coatings Transactions,87, (B2), 121–5, 2004 Strömberg L, ‘Integrated life-cycle design of coatings on exterior wood. Part 2: Life-cycle assessment’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 211–20, 2004 Graystone J, ‘Journeys into colour space’,Surface Coatings International Part B: Coatings Transactions,87, (B3), 221–8, 2004 Pugh S L, ‘The evaluation of new printed standards for colour fastness to light’,Surface Coatings International Part B: Coatings Transactions,87, (B1), 27–31, 2004 Mirhabibi A R, R Aghababazadeh and M Edrissi, ‘Preparation of some coloured chelates of 2-mercapto-4-picoline-N-oxide and their applications as new pigment’,Surface Coatings International Part B: Coatings Transactions,87, (B4), 285–8, 2004