Advances in gamma titanium aluminides and their manufacturing techniques
Tóm tắt
Từ khóa
Tài liệu tham khảo
Bertin, 2003, Fifty years of hypersonics: where we've been, where we're going, Progress in Aerospace Sciences, 39, 511, 10.1016/S0376-0421(03)00079-4
Soudani, SM High performance RX2 Ti 6242S titanium for re-useable launch vehicles metallic thermal protection systems. In: Proceedings of AIAA space 2000 conference & exposition. 2000. AIAA-2000–5147.
Das, 2004, Sheet gamma TiAl: status and opportunities, Journal of Materials, 42
Djanarthany, 2001, An overview of monolithic titanium aluminides based on Ti3Al and TiAl, Materials Chemistry and Physics, 72, 301, 10.1016/S0254-0584(01)00328-5
Immarigeon, 1995, Lightweight materials for aircraft applications, Materials Charecterization, 34, 41, 10.1016/1044-5803(95)00066-6
Froes, 1992, Review synthesis, properties and applications of titanium aluminides, Journal of Materials Science, 27, 5113, 10.1007/BF02403806
Voice, 1999, The future of gamma-titanium alumnides by Rools Royce, Aircraft Engineering and Aerospace Technology, 71, 337, 10.1108/00022669910371031
Bartolotta, P, Krause, DL Titanium aluminide applications in the high speed civil transport. In: Proceedings of international symposium on gamma titanium aluminides. 1999. p. 1–9.
Lütjering, 2007
Soboyejo, 1997, The fatigue and fracture behavior of a gamma-titanium alumnide intermtallic: influence of ductile phase reinforcement, Engineering Fracture Mechanics, 56, 379, 10.1016/S0013-7944(96)00101-4
Soboyejo, 2004, Probabilistic framework for the modeling of fatigue in cast lamellar gamma-based titanium aluminides, Mechanics of Materials, 36, 177, 10.1016/S0167-6636(03)00038-3
Sommer, 2003
Dimiduk, 2003, Gamma titanium aluminides 2003
Baur, 2003
GE Aviation. GE—Aviation: GEnx. GE. [Online], 2007. 〈http://www.geae.com/engines/commercial/genx/〉.
Das, 2003
NASA Glenn Research Center. PM gamma titanium aluminide and fabrication techniques. NASA Tech Briefs. LEW-17173, Cleveland, OH.
Kim, 1989, Intermetallic alloys based on gamma titanium aluminides, Journal of Materials, 24
Froes, FH, Suryanarayana, C Physical metallurgy of and processing of intermetallics compounds. New York: Chapman and Hall, 1995.
Hao, 2000, The influence of alloying on the alpha/(alpha+gamma)/gamma phase boundaries in TiAl based systems, Acta Materialia, 48, 1313, 10.1016/S1359-6454(99)00415-2
Bird, 2004, Development of protective coatings for high-temperature metallic materials, Journal of Spacecrafts and Rockets, 41, 213, 10.2514/1.9191
Sarkar, 2009, Oxidation protection of gamma-titanium aluminide using glass–ceramic coatings, Surface & Coatings Technology, 203, 1797, 10.1016/j.surfcoat.2008.12.029
Ding, 2000, Microstructural evolution in superplastic deformation of a Ti3Al alloy, Journal of Material Science Letters, 19, 1135, 10.1023/A:1006798823979
Appel, 2004, Physical aspects of hot-working gamma-based titanium aluminides, Intermetallics, 12, 791, 10.1016/j.intermet.2004.02.042
Chraponski, 2003, Microstructure and chemical composition of phases in Ti-48Al-2Cr–2Nb intermetallic alloy, Material Chemistry and Physics, 81, 438, 10.1016/S0254-0584(03)00042-7
Kim, 1991, Microstructural evolution and mechanical properties of a forged gamma titanium alloy, Acta Metallurgica et Materialia, 40, 1121, 10.1016/0956-7151(92)90411-7
Ramanujan, 2000, Phase transformations in gamma based titanium aluminides, International Materials Reviews, 45, 218, 10.1179/095066000101528377
Draper, 2003
Appel, 2000, Novel design concepts for gamma-based titanium alumnide alloys, Intermetallics, 8, 1283, 10.1016/S0966-9795(00)00036-4
Kong, 2011, Effect of heat treatment on microstructures and tensile properties of as-forged Ti–45Al–5Nb–0.3Y alloy, Intermetallics, 19, 212, 10.1016/j.intermet.2010.08.012
Sha, 2006, The evolution of microstructure during the processing of gamma Ti–Al alloys, JOM Journal of the Minerals Metals and Materials Society, 58, 64, 10.1007/s11837-006-0085-x
Kim, 1995, Effects of microstructure on the deformation and fracture of gamma-TiAl alloys, Materials Science and Engineering, Al92/193, 519, 10.1016/0921-5093(94)03271-8
Choi, 2002, Effects of microstructural parameters on the fatigue crack growth of fully lamellar gamma-TiAl alloys, Materials Science and Engineering, A329-331, 545, 10.1016/S0921-5093(01)01560-X
Dimiduk, 1998, Microstructure development in gamma TiAl alloy mill products by thermomechanical processing, Materials Science and Engineering, A243, 66, 10.1016/S0921-5093(97)00780-6
Fukotomi, 2009, Lamellar orientation control in TiAl base alloys by a Two-step compression process at high temperature, Materials Science and Engineering, 508, 106, 10.1016/j.msea.2008.12.027
Kim, 1991, Progress in the understanding of gamma titanium aluminides, Journal of Materials, August, 40
Kim, 1998, Strength and ductility in TiAl alloys, Intermetallics, 6, 623, 10.1016/S0966-9795(98)00037-5
Yamaguchi, 2000, High-temperature structure intermetallics, Acta Materialia, 48, 307, 10.1016/S1359-6454(99)00301-8
Mercer, 1997, Fatigue crack growth in cast gamma titanium alumnides, Acta Materialia, 45, 4385, 10.1016/S1359-6454(97)00060-8
Cui, 2009, Fracture characteristics of gamma-TiAl alloy with high Nb content under cyclic loading, Journal of Alloys and Compounds, 477, 596, 10.1016/j.jallcom.2008.10.118
Mercer, 1996, Hall-petch relationships in gamma titanium alumnides, Scripta Materialia, 35, 17, 10.1016/1359-6462(96)00097-8
Porizek, R, Radoslav, V, Znam, S, Nguyen, MD Atomistic studies of dislocation glide in gamma-TiAl. In: Proceedings of materials research soceity symposium. Department of materials science & engineering, University of Pennsylvania. 2003. 753. p. 1–6.
Marketz, 2003, Deformation mechanisms in TiAl intermetallics—experiments and modeling, International Journal of Plasticity, 19, 281, 10.1016/S0749-6419(01)00036-5
Wagner, 1995, 231
Vishwanathan, 2003, Microstructural effects on the tensile properties and deformation behavior of a Ti–48Al gamma titanium aluminide, Metallurgical and Materials Transactions, 34A, 2113, 10.1007/s11661-003-0276-9
Hug, 1988, Weak-beam observation of a slip transition in TiAl, Philosophical Magazine A, 57, 499, 10.1080/01418618808204682
Vasudevan, 1989, The influence of second phase Ti3Al on the deformation mechanisms in TiAl, Philosophical Magazine Letters, 59, 299, 10.1080/09500838908206358
Katzarov, 2009, Atomic studies of <101] screw dislocation core structures and glide in gamma-TiAl, Philosophical Magazine, 89, 1731, 10.1080/14786430903037281
Hishinuma, 1997, Deformation twinning in TiAl: effects of defect clustering, Metals and Materials, 3, 65, 10.1007/BF03026128
Cerreta, 2001, Formation of deformation twins in TiAl, Acta Materialia, 49, 3803, 10.1016/S1359-6454(01)00264-6
Sriram, 1995, Dislocation structures and deformation behaviorof Ti–50/52Al Alloys between 77K and 1173K, Materials Science and Engineering A, 192/193, 217, 10.1016/0921-5093(94)03250-5
Whang, 1995, Deformation in G-TiAl aluminides—focused on anomalous hardening, 245
Yang, 2002, The high temperature tensile properties and microstructural analysis of Ti–40Al–15Nb alloy, Intermetallics, 10, 161, 10.1016/S0966-9795(01)00123-6
Zhang, 2009, Tensile behaviors of fine-grained gamma-TiAl based alloys synthesized by pulse current auxiliary sintering, Materials Science and Engineering A, 520, 101, 10.1016/j.msea.2009.05.011
Marketz, 2002, On the role of twinning during room temperature deformation of gamma-TiAl based alloys, Materials Science and Engineering, A329, 177, 10.1016/S0921-5093(01)01558-1
Christop, U, Appel, F, Wagner, R High-temperature ordered intermetallic alloys VII. In: Proceedings of materials research sot. symposium, Pittsburgh, 1997. 460, pp. 207–12.
Gerling, 2004, Structural charecterization and tensile properties of a high Nb containing gamma TiAl sheet obtained by powder metallurgical processing, Intermetallics, 12, 275, 10.1016/j.intermet.2003.10.005
Braun, 2009, Oxidation behavior of TBC systems on gamma-TiAl based alloy-45Al–8Nb, Oxidation of Metals, 71, 295, 10.1007/s11085-009-9144-3
Hamzah, 2009, Effect of beta phase on room to high temperature mechanical properties of as-cast gamma titanium alumnides, Mechanics of Advanced Materials and Structures, 16, 384, 10.1080/15376490802710753
Huang, 2010, Microstructural instability and embrittlement behaviour of an Al-lean, high-Nb gamma-TiAl-based alloy subjected to a long-term thermal exposure in air, Intermetallics, 18, 161, 10.1016/j.intermet.2009.07.007
Liu, 2009, Nb Effects on the structural and mechanical properties of TiAl alloy: density-functional theory study, Journal of Materials Research, 24, 3165, 10.1557/jmr.2009.0394
Hu, 2002, Microstructure and tensile properties of investment cast TiAl–46Al–8Nb–1B alloy, Scripta Materialia, 47, 273, 10.1016/S1359-6462(02)00140-9
Wallgram, 2009, Technology and mechanical properties of advanced gamma-TiAl based alloys, International Journal of Materials Research, 100, 1021, 10.3139/146.110154
Kim, 2009, Microstructural changes and estimated strengthening contributions in a gamma alloy Ti–45Al–5Nb pack-rolled sheet, Intermetallics, 17, 1017, 10.1016/j.intermet.2009.05.018
Zhang, 2002, On the origin of superior high strength of Ti–45Al–10Nb alloys, Intermetallics, 10, 403, 10.1016/S0966-9795(02)00008-0
Woo, 2003, Oxidation behavior and transmission electron microscope characterization of Ti–44Al–xNb–2(Ta,Zr) alloys, Metallurgical and Materials Transactions, 34A, 2263, 10.1007/s11661-003-0290-y
Shazly, 2009, Dynamic fracture initiation toughness of a gamma (Met-PX) titanium aluminide at elevated temperatures, Metallurgical and Materials Transactiions A, 40A, 1400, 10.1007/s11661-009-9823-3
Schillinger, 2002, Microstructural stability and creep behavior of a lamellar gamma-TiAl based alloy with extremely fine lamellar spacing, Intermetallics, 10, 459, 10.1016/S0966-9795(02)00021-3
Jeon, 1999, Recrystallization in cast 45-2-2 XD™ titanium aluminide, Materials Science and Engineering, 271A, 128, 10.1016/S0921-5093(99)00192-6
Christodoulou, L, Parrish, PA, Crowe, CR High temperature, high performance composites. In: material research society symposia proceedings, Pittsburgh, 1988. 120, p. 29.
Chaudhari, 2010, Titanium aluminide sheets made using roll bonding and reaction annealing, Intermetallics, 18, 472, 10.1016/j.intermet.2009.09.008
Yu, 2009, Synthesis of an ultrafine grained TiAl based alloy by subzero temperature milling and HIP, its microstructure and mechanical properties, Journal of Alloys and Compounds, 474, 105, 10.1016/j.jallcom.2008.06.069
Chen, 2009, Effect of spark plasma sintering temperature on microstructure and mechanical properties of an ultrafine grained TiAl intermetallic alloy, Materials Science and Engineering, A525, 166, 10.1016/j.msea.2009.06.056
Szewczak, 1997, Explosive consolidation of mechanically alloyed Ti–Al alloys, Materials Science and Engineering, A226/228, 115, 10.1016/S0921-5093(97)80030-5
Cheng, 1997, Characterization of TiAl intermetallic rods produced from elemental powders by hot extrusion reaction synthesis (HERS), Journal of Material Science, 32, 6255, 10.1023/A:1018689111498
Fu, 2001, Reaction synthesis of titanium aluminides, Journal of Materials Science, 36, 5537, 10.1023/A:1012540927009
Sun, 2003, Fabrication of TiAl alloys by MA-PDS process and the mechanical properties, Intermetallics, 11, 825, 10.1016/S0966-9795(03)00081-5
Lu, 2009, Microstructure and mechanical properties of a spark plasma sintered Ti–45Al–8.5Nb–0.2W–0.2B–0.1Y alloy, Intermetallics, 17, 840, 10.1016/j.intermet.2009.03.013
Rivard, J Development of a finite volume model for the high-density infrared processing of gamma-TiAl thin-gage sheet. PhD thesis, University of Cincinnati, Cincinnati, OH, 2005.
Kothari, 2007, Microstructure and mechanical properties of consolidated gamma titanium aluminides, Powder Metallurgy, 50, 21, 10.1179/174329007X186471
Chen, 2009, Research on the hot precision processing of TiAl alloys, Materials Science Forum, 620–622, 407, 10.4028/www.scientific.net/MSF.620-622.407
Liu, 2002, Effects of Nb and Al on the microstructures and mechanical properties of high Nb containing TiAl base alloys, Intermetallics, 10, 653, 10.1016/S0966-9795(02)00037-7
Prasad, 2004, Grain coarsening in Ti–45Al based titanium aluminides at supertransus temperature and subsequent lamellar structure formation, Materials Science and Technology, 20, 87, 10.1179/174328413X13789824293740
Appel, F, Clemens, H, Oehring, M Recent advances in development and processing of titanium aluminide alloys. Materials research society symposium proceedings 2001; 646.
Yamaguchi, M, Inui, H, Kishida, K, Matsumuro, M, Shirai, Y Gamma titanium aluminide alloys. Materials research society symposium proceedings 1995; 364:3–13.
Wereley, 1993, Intelligent control of consolidation and solidification processes, Journal of Materials Engineering and Performance, 2, 671, 10.1007/BF02650056
Wu, 2004, Alloy and process development of TiAl, Journal of Materials Science, 39, 3935, 10.1023/B:JMSC.0000031474.29156.17
Chan, 1998, Fundamental aspects of fatigue and fracture in a TiAl sheet alloy, Metallurgical and Materials Transactions A, 29A, 73, 10.1007/s11661-998-0160-8
Kong, 2009, Microstructures and mechanical properties of hot-pack rolled Ti–43Al–9V–Y alloy sheet, Transactions of the Nonferrous Metals Society of China, 19, 1126, 10.1016/S1003-6326(08)60418-5
Cao, 2009, Microstructural characterization and micromechanical properties of dual-phase carbide in arc-melted titanium aluminide based alloy with carbon addition, Journal of Alloys and Compounds, 484, 816, 10.1016/j.jallcom.2009.05.052
Yolton, 2003, 233
Moll, 1990, P/M processing of titanium aluminides, The International Journal of Powder Metallurgy, 26, 149
Oehring, 1993, The formation of metastable Ti–Al solid solutions by mechanical alloying and ball milling, Journal of Material Research, 8, 11, 10.1557/JMR.1993.2819
Fadeeva, 1998, Structural defects and thermal stability of Ti(Al) solid solution obtained by mechanical alloying, Materials Science and Engineering, A242, 230, 10.1016/S0921-5093(97)00503-0
Kumaran, 2005, Nanocrystalline and amorphous structure formation in Ti–Al during high energy ball milling, Powder Metallurgy, 48, 354, 10.1179/174329005X73829
Chen, 2009, The phase Transformation and microstructure of TiAl/Ti2AlC composites caused by hot pressing, Ceramics International, 35, 1807, 10.1016/j.ceramint.2008.10.009
Habel, 2004, HIP temperature and properties of a gas-atomized gamma-TiAl alloy, Intermetallics, 12, 63, 10.1016/j.intermet.2003.08.006
Smith, 2000, P/M approach for the fabrication of an orthorhombic titanium aluminide for MMC applications, Journal of Material Science, 35, 316
Zhang, 2011, Comparative assessment of microstructure and compressive behaviours of PM TiAl alloy prepared by HIP and pseudo-HIP technology, Powder Metallurgy, 54, 133, 10.1179/174329009X424528
Wegmann, 2002, High-temperature mechanical properties of hot isostatically pressed and forged gamma titanium aluminide alloy powder, Intermetallics, 10, 511, 10.1016/S0966-9795(02)00026-2
LeHolm, R, Clemens, H, Kestler, H Powder metallurgy gamma-based titanium aluminide structures for use in various high temperature aerospace applications. In: Proceedings of international symposium on gamma titanium aluminides. 1999. pp. 25–33.
Schaefer, 1992, Phase transformation effects during HIP of TiAl, Acta Metallurgica et Materialia, 40, 1645, 10.1016/0956-7151(92)90107-P
Wegmann, 2003, Temperature induced porosity in hot isostatically pressed gamma titanium aluminide alloy powders, Acta Materialia, 5, 741, 10.1016/S1359-6454(02)00465-2
Wegmann, G, Gerling, R, Schimansky, FP, Zhang, JX In: Kosuge K, Nagai H, editors. Proceedins of 2000 powder metallurgy world congress. The Japan society of powder and powder metallurgy 2000; p. 479–82.
Gerling, 1998, Porosity and argon concentration in gas atomized γ-TiAl powder and hot isostatically pressed compacts, Materials Science and Engineering, A252, 239, 10.1016/S0921-5093(98)00656-X
Rabin, 1990, Characterization of entrapped gases in rapidly solidified powders, Material Science and Engineering, A124, 1
L'Estrade, 1988, 187
Bae, 1988, Submicron defects in rapidly solidified type 304 stainless steel powders containing noble gases, Scripta Metallurgica, 22, 691, 10.1016/S0036-9748(88)80184-4
Gerling, 2003, 249
Schimansky, 1999, Spray forming of gamma titanium alumnides, Intermetallics, 7, 1275, 10.1016/S0966-9795(99)00041-2
Schimansky, 1999, Spray forming of gamma titanium alumnides, Intermetallics, 7, 1275, 10.1016/S0966-9795(99)00041-2
Clemens, H, Glatz, W, Eberhardt, N, Martinz, H, Knabl, W Processing, properties and applications of gamma titanium aluminide sheet and foil materials. Materials research society symposium Proceedings of 1997; 460:29–43.
Das, G Direct Rolling of Cast Gamma Titanium Aluminide Alloys. US Patent Number 7923127 2005.
Bhattacharya, 2004, Nanocrystalline TiAl powders syntehsized by high-energy ball milling: effects of milling parameters on yield and contamination, Journal of Alloys and Compounds, 368, 187, 10.1016/j.jallcom.2003.08.079
Bohn, 2001, Mechanical behavior of submicron-grained gamma-TiAl-based alloys at elevated temperatures, Intermetallics, 9, 559, 10.1016/S0966-9795(01)00039-5
Kashyap, 2001, Effects and mechanisms of grain refinement in aluminium alloys, Bulletin of Material Science, 24, 345, 10.1007/BF02708630
Suryanarayana, 2001, Mechanical alloying and milling, 46, 1
Forouzanmehr, 2009, Study on solid-state reactions of nanocrystalline TiAl synthesized by mechanical alloying, Journal of Alloys and Compounds, 471, 93, 10.1016/j.jallcom.2008.03.121
Forouzanmehr, 2009, Synthesis and characterization of TiAl/Al2O3 nanocomposite by mechanical alloying, Journal of Alloys and Compounds, 478, 257, 10.1016/j.jallcom.2008.12.047
Gonzalez, 2009, Solid state amorphisation in binary systems prepared by mechanical alloying, Journal of Alloys and Compounds, 483, 289, 10.1016/j.jallcom.2008.08.127
Senkov, 1998, Microstructural evolution of a nanocrystalline Ti–47Al–3Cr alloy on annealing at 1200°C, Scripta Materialia, 39, 691, 10.1016/S1359-6462(98)00233-4
Szewczak, 1999, Influence of the Mechanical Alloying Parameters on crystallite size of Ti–AI powders, Nanostructured Materials, 12, 171, 10.1016/S0965-9773(99)00091-4
Farhang, 2010, Effects of mechanical alloying on the characteristics of a nanocrystalline Ti–50at%Al during hot pressing consolidation, Materials Science and Engineering B-Advanced Functional Solid-State Materials, 168, 136
Gu, 2009, In-situ TiC particle reinforced Ti–Al matrix composites: powder preparation by mechanical alloying and selective laser melting behavior, Applied Surface Science, 255, 9230, 10.1016/j.apsusc.2009.07.008
Chen, 2009, Orientation relationships between TiB (B27), B2, and Ti3Al phases, Journal of Materials Research, 24, 5, 10.1557/jmr.2009.0220
Dobbins, 2009, An X-ray photoemission electron microscopy study of the formation of Ti–Al phases in 4mol% TiCl3 catalyzed NaAlH4 during high energy ball milling, Nanotechnology, 20, 1, 10.1088/0957-4484/20/20/204014
Hooker, 2000, Metal matrix composites for aeroengines, Materials Science and Technology, 16, 725, 10.1179/026708300101508414
Kampe, 1994, Room-temperature strength and deformation of TiB2-reinforced near-gamma titanium aluminides, Metallurgical and Materials Transactions, 25A, 2181, 10.1007/BF02652319