Advances in bismuth-telluride-based thermoelectric devices: Progress and challenges

Shi, 2020, Advanced thermoelectric design: from materials and structures to devices, Chem. Rev., 120, 7399, 10.1021/acs.chemrev.0c00026 Shi, 2022, A solvothermal synthetic environmental design for high-performance SnSe-based thermoelectric materials, Adv. Energy Mater., 12, 10.1002/aenm.202200670 Shi, 2021, Fiber-based thermoelectrics for solid, portable, and wearable electronics, Energy Environ. Sci., 14, 729, 10.1039/D0EE03520C Witting, 2020, The thermoelectric properties of -type bismuth telluride: bismuth selenide alloys Bi2Te3−xSex, Research, 2020, 10.34133/2020/4361703 Cao, 2021, Advances in conducting polymer-based thermoelectric materials and devices, Microstructures, 1 Xu, 2021, Conducting polymer-based flexible thermoelectric materials and devices: from mechanisms to applications, Prog. Mater. Sci., 121, 10.1016/j.pmatsci.2021.100840 Liu, 2020, Cu2Se thermoelectrics: property, methodology, and device, Nano Today, 35, 10.1016/j.nantod.2020.100938 Setyawan, 2010, High-throughput electronic band structure calculations: challenges and tools, Comput. Mater. Sci., 49, 299, 10.1016/j.commatsci.2010.05.010 Kresse, 1994, Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium, Phys. Rev. B, 49, 14251, 10.1103/PhysRevB.49.14251 Kresse, 1993, Ab initio molecular dynamics for liquid metals, Phys. Rev. B, 47, 558, 10.1103/PhysRevB.47.558 Kresse, 1996, Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set, Comput. Mater. Sci., 6, 15, 10.1016/0927-0256(96)00008-0 Kresse, 1994, Norm-conserving and ultrasoft pseudopotentials for first-row and transition elements, J. Phys. Condens. Matter, 6, 8245, 10.1088/0953-8984/6/40/015 Kresse, 1996, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B, 54, 11169, 10.1103/PhysRevB.54.11169 Kresse, 1999, From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B, 59, 1758, 10.1103/PhysRevB.59.1758 Perdew, 1996, Generalized gradient approximation made simple, Phys. Rev. Lett., 77, 3865, 10.1103/PhysRevLett.77.3865 Yen, 2021, Nano-precipitation and carrier optimization synergistically yielding high-performance n-type Bi2Te3 thermoelectrics, Mater. Today Phys., 19 Zhang, 2021, Boron-mediated grain boundary engineering enables simultaneous improvement of thermoelectric and mechanical properties in n-type Bi2Te3, Small, 17 Beretta, 2019, Thermoelectrics: from history, a window to the future, Mater. Sci. Eng. R, 138, 10.1016/j.mser.2018.09.001 Chen, 2021, Expand band gap and suppress bipolar excitation to optimize thermoelectric performance of Bi0.35Sb1.65Te3 sintered materials, Mater. Today Phys., 21 Zhang, 2020, Tuning optimum temperature range of Bi2Te3-based thermoelectric materials by defect engineering, Chem. Asian J., 15, 2775, 10.1002/asia.202000793 Wang, 2019, Enhanced thermoelectric properties of nanostructured n-type Bi2Te3 by suppressing Te vacancy through non-equilibrium fast reaction, Chem. Eng. J., 391 Kawajiri, 2021, Enhancement of thermoelectric properties of n-type Bi2Te3–xSex by energy filtering effect, ACS Appl. Energy Mater., 4, 11819, 10.1021/acsaem.1c02560 Tan, 2019, Synergistically optimized thermoelectric performance in Bi0.48Sb1.52Te3 by hot deformation and Cu doping, ACS Appl. Energy Mater., 2, 6714, 10.1021/acsaem.9b01207 Wu, 2021, Optimized thermoelectric properties of Bi0.48Sb1.52Te3 through AgCuTe doping for low-grade heat harvesting, ACS Appl. Mater. Interfaces, 13, 57514, 10.1021/acsami.1c19893 Prokhorov, 2011, Detection of internal cracks and ultrasound characterization of nanostructured Bi2Te3-based thermoelectrics via acoustic microscopy, Ultrasonics, 51, 715, 10.1016/j.ultras.2011.02.005 Lin, 2011, Effect of ball milling and post treatment on crystal defects and transport properties of Bi2(Se,Te)3 compounds, J. Appl. Phys., 110, 10.1063/1.3658256 Kim, 2018, Interfacial energy band and phonon scattering effect in Bi2Te3-polypyrrole hybrid thermoelectric material, Appl. Phys. Lett., 113, 10.1063/1.5050089 Shi, 2019, 3D printing fabrication of porous bismuth antimony telluride and study of the thermoelectric properties, J. Manuf. Process., 37, 370, 10.1016/j.jmapro.2018.11.001 Wang, 2018, Achieving high power factor of p-type BiSbTe thermoelectric materials via adjusting hot-pressing temperature, Intermetallics, 93, 338, 10.1016/j.intermet.2017.10.015 Kim, 2018, Band engineering and tuning thermoelectric transport properties of p-type Bi0.52Sb1.48Te3 by Pb doping for low-temperature power generation, Scr. Mater., 145, 41, 10.1016/j.scriptamat.2017.10.009 Guo, 2022, BiSbTe alloy with high thermoelectric and mechanical performance for power generation, Scr. Mater., 218, 10.1016/j.scriptamat.2022.114801 Shi, 2021, Large-area display textiles integrated with functional systems, Nature, 591, 240, 10.1038/s41586-021-03295-8 Chauhan, 2021, Compositional fluctuations mediated by excess tellurium in bismuth antimony telluride nanocomposites yield high thermoelectric performance, J. Phys. Chem. C, 125, 20184, 10.1021/acs.jpcc.1c05375 Hu, 2019, The effect of Ni/Sn doping on the thermoelectric properties of BiSbTe polycrystalline bulks, J. Solid State Chem., 277, 175, 10.1016/j.jssc.2019.06.006 Xing, 2021, Enhanced thermoelectric performance and atomic-resolution interfacial structures in BiSbTe thermo-electro-magnetic nanocomposites incorporating magnetocaloric LaFeSi nanoparticles, J. Materiomics, 7, 998, 10.1016/j.jmat.2021.02.013 Zhang, 2019, Enhanced thermoelectric performance of BiSbTe alloy: energy filtering effect of nanoprecipitates and the effect of SiC nanoparticles, J. Alloys Compd., 784, 1276, 10.1016/j.jallcom.2019.01.084 Li, 2016, Enhanced thermoelectric performance of Cu2Se/Bi0.4Sb1.6Te3 nanocomposites at elevated temperatures, Appl. Phys. Lett., 108 Zhang, 2016, Enhanced thermoelectric performance of nanostructured CNTs/BiSbTe bulk composite from rapid pressure-quenching induced multi-scale microstructure, J. Materiomics, 2, 316, 10.1016/j.jmat.2016.08.002 Tan, 2021, Enhanced thermoelectric performance of p-type sintered BiSbTe-based composites with AgSbTe2 addition, Ceram. Int., 47, 725, 10.1016/j.ceramint.2020.08.182 Shin, 2017, Enhanced thermoelectric performance of reduced graphene oxide incorporated bismuth-antimony-telluride by lattice thermal conductivity reduction, J. Alloys Compd., 718, 342, 10.1016/j.jallcom.2017.05.204 Sie, 2019, Enhanced thermoelectric properties of p-type BiSbTe/TiO2Ag alloys, Intermetallics, 109, 30, 10.1016/j.intermet.2019.03.001 Kim, 2017, Enhancement of thermoelectric properties in liquid-phase sintered Te-excess bismuth antimony tellurides prepared by hot-press sintering, Acta Mater., 135, 297, 10.1016/j.actamat.2017.06.036 Sharief, 2022, Enhancing the thermoelectric properties of powder metallurgically produced BiSbTe alloy through feasible electroless surface coating method, J. Eur. Ceram. Soc., 42, 3473, 10.1016/j.jeurceramsoc.2022.02.054 Shin, 2018, Enhancing thermoelectric performances of bismuth antimony telluride via synergistic combination of multiscale structuring and band alignment by FeTe2 incorporation, ACS Appl. Mater. Interfaces, 10, 3689, 10.1021/acsami.7b18451 Fu, 2021, Hidden role of intrinsic Sb-rich nano-precipitates for high-performance Bi2-xSbxTe3 thermoelectric alloys, Acta Mater., 215, 10.1016/j.actamat.2021.117058 Li, 2019, High thermoelectric efficiency of p-type BiSbTe-based composites with CuGaTe2 nanoinclusions, Scr. Mater., 172, 88, 10.1016/j.scriptamat.2019.07.016 Deng, 2018, High thermoelectric performance in Bi0.46Sb1.54Te3 nanostructured with ZnTe, Energy Environ. Sci., 11, 1520, 10.1039/C8EE00290H Yoon, 2018, High thermoelectric performance of melt-spun CuxBi0.5Sb1.5Te3 by synergetic effect of carrier tuning and phonon engineering, Acta Mater., 158, 289, 10.1016/j.actamat.2018.07.067 Zheng, 2017, High thermoelectric performance of p-BiSbTe compounds prepared by ultra-fast thermally induced reaction, Energy Environ. Sci., 10, 2638, 10.1039/C7EE02677C Fu, 2021, High-performance bismuth antimony telluride thermoelectric membrane on curved and flexible supports, ACS Energy Lett., 6, 2378, 10.1021/acsenergylett.1c00801 Qin, 2018, Improved thermoelectric performance of p-type Bi0.5Sb1.5Te3 through Mn doping at elevated temperature, Mater. Today Phys., 6, 31, 10.1016/j.mtphys.2018.07.002 Li, 2016, Inhibition of minority transport for elevating the thermoelectric figure of merit of CuO/BiSbTe nanocomposites at high temperatures, RSC Adv., 6, 112050, 10.1039/C6RA24107G Madavali, 2018, Investigation of microstructure and thermoelectric properties of p-type BiSbTe/ZnO composites, Int. J. Appl. Ceram. Technol., 15, 125, 10.1111/ijac.12789 Xu, 2017, Nanocomposites from solution-synthesized PbTe-BiSbTe nanoheterostructure with unity figure of merit at low-medium temperatures (500–600 K), Adv. Mater., 29 Qin, 2022, Nanotwins strengthening high thermoelectric performance bismuth antimony telluride alloys, Adv. Sci., 9, 10.1002/advs.202200432 Dharmaiah, 2022, Optimization of mixed grain size structure for enhancement of thermoelectric figure of merit in p-type BiSbTe-based alloys, J. Mater. Sci., 57, 18131, 10.1007/s10853-022-07532-x Lim, 2019, Optimum thermoelectric performance of bismuth–antimony–telluride alloy/pedot:pss nanocomposites prepared by an innovative redox process, ACS Appl. Energy Mater., 2, 8219, 10.1021/acsaem.9b01702 Zhao, 2021, Porous bismuth antimony telluride alloys with excellent thermoelectric and mechanical properties, J. Mater. Chem. A, 9, 4990, 10.1039/D0TA09795K Wei, 2020, Precise regulation of carrier concentration in thermoelectric BiSbTe alloys via magnetic doping, ACS Appl. Mater. Interfaces, 12, 20653, 10.1021/acsami.0c02408 Yang, 2021, Significant enhancement of thermoelectric figure of merit in BiSbTe-based composites by incorporating carbon microfiber, Adv. Funct. Mater., 31 Li, 2016, Simultaneous increase in conductivity and phonon scattering in a graphene nanosheets/(Bi2Te3)0.2(Sb2Te3)0.8 thermoelectric nanocomposite, J. Alloys Compd., 661, 389, 10.1016/j.jallcom.2015.11.217 Xie, 2017, Stabilization of thermoelectric properties of the Cu/Bi0.48Sb1.52Te3 composite for advantageous power generation, J. Electron. Mater., 46, 2746, 10.1007/s11664-016-4953-z Lee, 2022, Synergistic optimization of the thermoelectric and mechanical properties of large-size homogeneous Bi0.5Sb1.5Te3 bulk samples via carrier engineering for efficient energy harvesting, ACS Appl. Mater. Interfaces, 14, 10394, 10.1021/acsami.1c23736 Bumrungpon, 2020, Synthesis and thermoelectric properties of bismuth antimony telluride thermoelectric materials fabricated at various ball-milling speeds with yttria-stabilized zirconia ceramic vessel and balls, Ceram. Int., 46, 13869, 10.1016/j.ceramint.2020.02.180 Zhuang, 2021, Thermoelectric performance enhancement in BiSbTe alloy by microstructure modulation via cyclic spark plasma sintering with liquid phase, Adv. Funct. Mater., 31, 10.1002/adfm.202009681 Zhang, 2017, Thermoelectric performance of graphene composited BiSbTe bulks by high pressure synthesis, J. Alloys Compd., 715, 344, 10.1016/j.jallcom.2017.05.004 Bao, 2022, Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres, Chem. Eng. J., 430, 10.1016/j.cej.2021.132738 Wu, 2022, Thermoelectric properties of n-type Bi2Se0.3Te2.7-based alloys with nanoflowers morphology, Appl. Phys. A, 128, 675, 10.1007/s00339-022-05838-w Hwang, 2019, Thermoelectric transport properties of interface-controlled p-type bismuth antimony telluride composites by reduced graphene oxide, Electron. Mater. Lett., 15, 605, 10.1007/s13391-019-00118-x Yang, 2020, Ultra-high thermoelectric performance in bulk BiSbTe/amorphous boron composites with nano-defect architectures, Adv. Energy Mater., 10 Kim, 2022, Energy filtering and phonon scattering effects in Bi2Te3–PEDOT:PSS composite resulting in enhanced n-type thermoelectric performance, Appl. Phys. Lett., 120, 10.1063/5.0076952 Zhang, 2016, Enhanced thermoelectric performance of solution-derived bismuth telluride based nanocomposites via liquid-phase Sintering, Nano Energy, 30, 630, 10.1016/j.nanoen.2016.10.056 Park, 2016, Extraordinary off-stoichiometric bismuth telluride for enhanced n-type thermoelectric power factor, J. Am. Chem. Soc., 138, 14458, 10.1021/jacs.6b09222 Wu, 2018, High thermoelectric performance in Cu-doped Bi2Te3 with carrier-type transition, Acta Mater., 157, 33, 10.1016/j.actamat.2018.07.022 Han, 2019, Improved thermoelectric properties of n-type Bi2Te3 alloy deriving from two-phased heterostructure by the reduction of CuI with Sn, J. Mater. Sci. Mater. Electron., 30, 1282, 10.1007/s10854-018-0396-z Chen, 2019, Simultaneous enhancement of the thermoelectric and mechanical performance in one-step sintered n-type Bi2Te3-based alloys via a facile mgb2 doping strategy, ACS Appl. Mater. Interfaces, 11, 45746, 10.1021/acsami.9b16781 Akshay, 2018, Surfactant-induced structural phase transitions and enhanced room temperature thermoelectric performance in n-type Bi2Te3 nanostructures synthesized via chemical route, ACS Appl. Nano Mater., 1, 3236, 10.1021/acsanm.8b00464 Han, 2017, A synergistic effect of metal iodide doping on the thermoelectric properties of Bi2Te3, Inorg. Chem. Front., 4, 881, 10.1039/C6QI00544F Sie, 2016, Thermoelectric performance of n-type Bi2Te3/Cu composites fabricated by nanoparticle decoration and spark plasma sintering, J. Electron. Mater., 45, 1927, 10.1007/s11664-015-4297-0 Lou, 2022, Tunable electrical conductivity and simultaneously enhanced thermoelectric and mechanical properties in n-type Bi2Te3, Adv. Sci., 9, 10.1002/advs.202203250 Xiong, 2021, Achieving high thermoelectric performance of n-type Bi2Te2.79Se0.21 sintered materials by hot-stacked deformation, ACS Appl. Mater. Interfaces, 13, 15429, 10.1021/acsami.1c02417 Hasezaki, 2016, Constituent element addition to type Bi2Te2.67Se0.33 thermoelectric semiconductor without harmful dopants by mechanical alloying, Mater. Trans., 57, 1001, 10.2320/matertrans.M2016031 Jabar, 2021, Enhanced power factor and thermoelectric performance for n-type Bi2Te2.7Se0.3 based composites incorporated with 3D topological insulator nanoinclusions, Nano Energy, 80, 10.1016/j.nanoen.2020.105512 Jabar, 2020, Enhanced thermoelectric performance of n-type SnxBi2Te2.7Se0.3 based composites embedded with in-situ formed SnBi and Te nanoinclusions, Compos. B. Eng., 197, 10.1016/j.compositesb.2020.108151 Chen, 2020, Enhanced thermoelectric properties of n-type Bi2Te2.7Se0.3 for power generation, J. Mater. Sci. Mater. Electron., 31, 4924, 10.1007/s10854-020-03057-8 Wu, 2017, Enhancing room temperature thermoelectric performance of n-type polycrystalline bismuth-telluride-based alloys via Ag doping and hot deformation, Mater. Today Phys., 2, 62, 10.1016/j.mtphys.2017.09.001 Zhang, 2022, Enhancing the room temperature thermoelectric performance of n-type Bismuth-telluride-based polycrystalline materials by low-angle grain boundaries, Mater. Today Phys., 22 Chen, 2022, Enhancing the thermoelectric performance of n-type Bi2Te2.7Se0.3 through the incorporation of Ag9AlSe6 inclusions, Inorg. Chem. Front., 9, 5386, 10.1039/D2QI01232D Zhai, 2017, Enhancing thermoelectric performance of n-type hot deformed bismuth-telluride-based solid solutions by nonstoichiometry-mediated intrinsic point defects, ACS Appl. Mater. Interfaces, 9, 28577, 10.1021/acsami.7b08537 Li, 2018, High thermoelectric performance of n-type Bi2Te2.7Se0.3 via nanostructure engineering, J. Mater. Chem. A, 6, 9642, 10.1039/C8TA00525G Wu, 2019, Liquid-phase hot deformation to enhance thermoelectric performance of n-type bismuth-telluride-based solid solutions, Adv. Sci., 6, 10.1002/advs.201901702 Jung, 2020, Mapping thermoelectric properties of polycrystalline n-type Bi2Te3-xSex alloys by composition and doping level, J. Alloys Compd., 844, 10.1016/j.jallcom.2020.155828 Zhu, 2022, Mediating point defects endows n-type Bi2Te3 with high thermoelectric performance and superior mechanical robustness for power generation application, Small, 18, 10.1002/smll.202201352 Rong, 2016, Microwave activated hot pressing: a new opportunity to improve the thermoelectric properties of n-type Bi2Te3-xSex bulks, Mater. Res. Bull., 83, 122, 10.1016/j.materresbull.2016.05.030 Chen, 2022, Modulation doping enables ultrahigh power factor and thermoelectric zt in n-type Bi2Te2.7Se0.3, Adv. Sci., 9 Kim, 2016, New chemical reaction process of a Bi2Te2.7Se0.3 nanomaterial for feasible optimization in transport properties resulting in predominant n-type thermoelectric performance, Ind. Eng. Chem. Res., 55, 5623, 10.1021/acs.iecr.6b00933 Son, 2018, Optimization of thermoelectric properties of n-type Bi2(Te,Se)2 with optimizing ball milling time, Rare Metals, 37, 351, 10.1007/s12598-018-1028-8 Zhu, 2021, Point defect engineering: co-doping synergy realizing superior performance in n-type Bi2Te3 thermoelectric materials, Small, 17, 10.1002/smll.202101328 Tao, 2021, Removing the oxygen-induced donor-like effect for high thermoelectric performance in n-type Bi2Te3-based compounds, ACS Appl. Mater. Interfaces, 13, 60216, 10.1021/acsami.1c19357 Zhu, 2021, Simultaneous enhancement of thermoelectric performance and mechanical properties in Bi2Te3 via Ru compositing, Chem. Eng. J., 407, 10.1016/j.cej.2020.126407 Sun, 2021, Simultaneous regulation of electrical and thermal transport properties of n-type Bi2Te3 via adding excessive te followed by se doping, ACS Appl. Energy Mater., 4, 4986, 10.1021/acsaem.1c00546 Zhang, 2019, Solution-processed n-type Bi2Te3−xSex nanocomposites with enhanced thermoelectric performance via liquid-phase sintering, Sci. China Mater., 62, 389, 10.1007/s40843-018-9312-5 Wudil, 2020, Substrate temperature-dependent thermoelectric figure of merit of nanocrystalline Bi2Te3 and Bi2Te2.7Se0.3 prepared using pulsed laser deposition supported by DFT study, Ceram. Int., 46, 24162, 10.1016/j.ceramint.2020.06.196 Lim, 2017, Synthesis of n-type Bi2Te1-xSex compounds through oxide reduction process and related thermoelectric properties, J. Eur. Ceram. Soc., 37, 3361, 10.1016/j.jeurceramsoc.2017.04.020 Hu, 2018, Thermal stability of n-type zone-melting Bi2(Te,Se)3 alloys for thermoelectric generation, Mater. Res. Express, 6, 10.1088/2053-1591/aaf595 Pan, 2016, Thermoelectric performance enhancement in n-type Bi2(TeSe)3 alloys owing to nanoscale inhomogeneity combined with a spark plasma-textured microstructure, NPG Asia Mater., 8, 10.1038/am.2016.67 Eum, 2017, Thermoelectric properties of Bi2Te3−ySey: imprepared by mechanical alloying and hot pressing, J. Electron. Mater., 46, 2623, 10.1007/s11664-016-4828-3 Zhang, 2020, Ultralow thermal conductivity and high thermoelectric performance of N-type Bi2Te2.7Se0.3-based composites incorporated with GaAs nanoinclusions, ACS Appl. Mater. Interfaces, 12, 37155, 10.1021/acsami.0c09338 Xu, 2016, Attaining high mid-temperature performance in (Bi,Sb)2Te3 thermoelectric materials via synergistic optimization, NPG Asia Mater., 8, e302, 10.1038/am.2016.134 Madavali, 2017, Enhanced thermoelectric figure-of-merit in Bi-Sb-Te nanocomposites with homogenously dispersed oxide ceramic ZrO2 nanoparticles, J. Appl. Phys., 121, 10.1063/1.4984914 Madavali, 2020, Preparation and thermoelectric performance of nano rare-earth oxides dispersed p-type BiSbTe alloys by mechanical milling and spark plasma sintering, Mater. Chem. Phys., 253, 10.1016/j.matchemphys.2020.123378 Lee, 2018, Control of oxygen content of n-type Bi2Te3 based compounds by sintering process and their thermoelectric properties, Mater. Lett., 230, 211, 10.1016/j.matlet.2018.07.119 Goto, 2017, Control of p-type and n-type thermoelectric properties of bismuth telluride thin films by combinatorial sputter coating technology, Appl. Surf. Sci., 407, 405, 10.1016/j.apsusc.2017.02.187 Malik, 2020, Enhanced thermoelectric performance of n-type Bi2Te3 alloyed with low cost and highly abundant sulfur, Mater. Chem. Phys., 255, 10.1016/j.matchemphys.2020.123598 Hu, 2020, Equal channel angular extrusion: an effective method to refine the microstructure of cast n-type Bi2Te3 based ingot to co-optimize thermoelectric and mechanical properties, Solid State Sci., 103, 10.1016/j.solidstatesciences.2020.106191 Xiong, 2020, Microstructure and properties of n-type Bi2Te3 based thermoelectric material fabricated by selective laser sintering, Mater. Res. Express, 7, 10.1088/2053-1591/ab81be Meroz, 2020, Enhanced thermoelectric properties of n-type Bi2Te3–xSex alloys following melt-spinning, ACS Appl. Energy Mater., 3, 2090, 10.1021/acsaem.9b02133 Hong, 2016, N-Type Bi2Te3–xSex nanoplates with enhanced thermoelectric efficiency driven by wide-frequency phonon scatterings and synergistic carrier scatterings, ACS Nano, 10, 4719, 10.1021/acsnano.6b01156 Pan, 2017, Self-tuning n-type Bi2(Te,Se)3/SiC thermoelectric nanocomposites to realize high performances up to 300 °C, Adv. Sci., 4, 10.1002/advs.201700259 Madavali, 2021, Development of high-performance thermoelectric materials by microstructure control of p-type BiSbTe based alloys fabricated by water atomization, Materials, 14, 4870, 10.3390/ma14174870 Nozariasbmarz, 2020, Effect of microwave processing and glass inclusions on thermoelectric properties of p-type bismuth antimony telluride alloys for wearable applications, Energies, 13, 4524, 10.3390/en13174524 Xie, 2016, Synergistic optimization of thermoelectric performance in p-type Bi0.48Sb1.52Te3/graphene composite, Energies, 9, 236, 10.3390/en9040236 Ding, 2023, PEDOT/CNT/Bi2Te3 coated porous thermoelectric yarns for textile based wearable thermoelectric generator, Smart Mater. Struct., 32, 10.1088/1361-665X/acba64 Ding, 2023, Superhydrophobic encapsulation of flexible Bi2Te3/CNT coated thermoelectric fabric via layer-by-layer assembly, Compos. Commun., 38, 10.1016/j.coco.2023.101509 Nguyen, 2023, Bulk Bi2Te3-based bendable thermoelectric device with highly elastic Cu-Be alloy foils, Mater. Today Commun., 34 Shi, 2023, Anisotropy engineering in solution-derived nanostructured Bi2Te3 thin films for high-performance flexible thermoelectric devices, Chem. Eng. J., 458, 10.1016/j.cej.2023.141450 Sun, 2023, High-performance n-type Bi2Te3 thermoelectric fibers with oriented crystal nanosheets, Nanomaterials, 13, 326, 10.3390/nano13020326 Qin, 2020, Ultrahigh average zt realized in p-type SnSe crystalline thermoelectrics through producing extrinsic vacancies, J. Am. Chem. Soc., 142, 5901, 10.1021/jacs.0c01726 Snyder, 2017, Figure of merit ZT of a thermoelectric device defined from materials properties, Energy Environ. Sci., 10, 2280, 10.1039/C7EE02007D Chen, 2022, Thermoelectric coolers: progress, challenges, and opportunities, Small Methods, 6, 10.1002/smtd.202101235 Kim, 2015, Relationship between thermoelectric figure of merit and energy conversion efficiency, Proc. Natl. Acad. Sci., 112, 8205, 10.1073/pnas.1510231112 Anatychuk, 2021, Thermoelectric medical device for measuring heat flux from ocular surface, 178 Saqr, 2008, Thermal design of automobile exhaust based thermoelectric generators: objectives and challenges, Int. J. Automot. Technol., 9, 155, 10.1007/s12239-008-0020-y Rowe, 1991, Applications of nuclear-powered thermoelectric generators in space, Appl. Energy, 40, 241, 10.1016/0306-2619(91)90020-X Zhang, 2022, Micro-thermoelectric devices, Nat. Electron., 5, 333, 10.1038/s41928-022-00776-0 Zhang, 2013, Integrated energy-harvesting system by combining the advantages of polymer solar cells and thermoelectric devices, J. Phys. Chem. C, 117, 24685, 10.1021/jp4044573 Shi, 2020, SrTiO3-based thermoelectrics: progress and challenges, Nano Energy, 78, 10.1016/j.nanoen.2020.105195 Shi, 2020, High-performance Thermoelectric SnSe: aqueous synthesis, innovations, and challenges, Adv. Sci., 7, 10.1002/advs.201902923 Shi, 2018, Polycrystalline SnSe with extraordinary thermoelectric property via nanoporous design, ACS Nano, 12, 11417, 10.1021/acsnano.8b06387 Zheng, 2018, Using high thermal stability flexible thin film thermoelectric generator at moderate temperature, Appl. Phys. Lett., 112, 10.1063/1.5028390 Wang, 2018, Experimental study of the effects of the thermal contact resistance on the performance of thermoelectric generator, Appl. Therm. Eng., 130, 847, 10.1016/j.applthermaleng.2017.11.036 Ibeagwu, 2019, Modelling and comprehensive analysis of TEGs with diverse variable leg geometry, Energy, 180, 90, 10.1016/j.energy.2019.05.088 Nguyen Huu, 2018, Flexible thermoelectric power generator with Y-type structure using electrochemical deposition process, Appl. Energy, 210, 467, 10.1016/j.apenergy.2017.05.005 Kim, 2014, A wearable thermoelectric generator fabricated on a glass fabric, Energy Environ. Sci., 7, 1959, 10.1039/c4ee00242c Hou, 2018, Fabrication and excellent performances of Bi0.5Sb1.5Te3/epoxy flexible thermoelectric cooling devices, Nano Energy, 50, 766, 10.1016/j.nanoen.2018.06.020 Zhang, 2015, Thermoelectric materials: energy conversion between heat and electricity, J. Materiomics, 1, 92, 10.1016/j.jmat.2015.01.001 Cao, 2023, Advances in the design and assembly of flexible thermoelectric device, Prog. Mater. Sci., 131, 10.1016/j.pmatsci.2022.101003 Selvan, 2018, Design, fabrication, and characterization of lateral-structured Cu-Ni thermoelectric devices, 665 Glatz, 2009, Bi2Te3-based flexible micro thermoelectric generator with optimized design, J. Microelectromech. Syst., 18, 763, 10.1109/JMEMS.2009.2021104 Sun, 2015, Heat shrink formation of a corrugated thin film thermoelectric generator, Energy Convers. Manag., 103, 674, 10.1016/j.enconman.2015.07.016 Rojas, 2017, Paper-based origami flexible and foldable thermoelectric nanogenerator, Nano Energy, 31, 296, 10.1016/j.nanoen.2016.11.012 Dörling, 2016, Photoinduced p- to n-type switching in thermoelectric polymer-carbon nanotube composites, Adv. Mater., 28, 2782, 10.1002/adma.201505521 Weinberg, 2002, Novel high performance small-scale thermoelectric power generation employing regenerative combustion systems, J. Phys. D Appl. Phys., 35, L61, 10.1088/0022-3727/35/13/102 Shi, 2020, Rational structure design and manipulation advance SnSe thermoelectrics, Mater. Horiz., 7, 3065, 10.1039/D0MH00954G Liu, 2017, Experimental prototype and simulation optimization of micro-radial milliwatt-power radioisotope thermoelectric generator, Appl. Therm. Eng., 125, 425, 10.1016/j.applthermaleng.2017.07.022 Yuan, 2018, Screen-printed radial structure micro radioisotope thermoelectric generator, Appl. Energy, 225, 746, 10.1016/j.apenergy.2018.05.073 Guo, 2022, Kirigami-based stretchable, deformable, ultralight thin-film thermoelectric generator for bodynet application, Adv. Energy Mater., 12 Xu, 2021, Two-dimensional flexible thermoelectric devices: using modeling to deliver optimal capability, Appl. Phys. Rev., 8, 10.1063/5.0067930 Dai, 2021, Joint-free single-piece flexible thermoelectric devices with ultrahigh resolution p–n patterns toward energy harvesting and solid-state cooling, ACS Energy Lett., 6, 4355, 10.1021/acsenergylett.1c02005 Zhou, 2021, Leaf-inspired flexible thermoelectric generators with high temperature difference utilization ratio and output power in ambient air, Adv. Sci., 8, 10.1002/advs.202004947 Menon, 2017, Radial thermoelectric generator fabricated from n- and p-type conducting polymers, J. Appl. Polym. Sci., 134, 10.1002/app.44060 Ao, 2022, Novel thermal diffusion temperature engineering leading to high thermoelectric performance in bi2te3-based flexible thin-films, Adv. Sci., 9, 10.1002/advs.202103547 Liu, 2023, One-step post-treatment boosts thermoelectric properties of PEDOT:PSS flexible thin films, J. Mater. Sci. Technol., 132, 81, 10.1016/j.jmst.2022.05.047 Zheng, 2021, Rational band engineering and structural manipulations inducing high thermoelectric performance in n-type CoSb3 thin films, Nano Energy, 81, 10.1016/j.nanoen.2020.105683 Tan, 2019, Anisotropy control–induced unique anisotropic thermoelectric performance in the n-type Bi2Te2.7Se0.3 thin films, Small Methods, 3, 10.1002/smtd.201900582 Jin, 2019, Super large Sn1-xSe single crystals with excellent thermoelectric performance, ACS Appl. Mater. Interfaces, 11, 8051, 10.1021/acsami.8b21699 Xu, 2020, Computation-guided design of high-performance flexible thermoelectric modules for sunlight-to-electricity conversion, Energy Environ. Sci., 13, 3480, 10.1039/D0EE01895C Dresselhaus, 2007, New directions for low-dimensional thermoelectric materials, Adv. Mater., 19, 1043, 10.1002/adma.200600527 Liang, 2021, A flexible quasi-solid-state thermoelectrochemical cell with high stretchability as an energy-autonomous strain sensor, Mater. Horiz., 8, 2750, 10.1039/D1MH00775K Hu, 2022, Thermoelectrics for medical applications: progress, challenges, and perspectives, Chem. Eng. J., 437, 10.1016/j.cej.2022.135268 Medlin, 2009, Interfaces in bulk thermoelectric materials: a review for current opinion in colloid and interface science, Curr. Opin. Colloid Interface Sci., 14, 226, 10.1016/j.cocis.2009.05.001 Miura, 2000, Texture and thermoelectric properties of hot-extruded Bi2Te3 compound, Mater. Sci. Eng. A, 277, 244, 10.1016/S0921-5093(99)00539-0 Zhang, 2022, Laser additive manufacturing process development for bismuth telluride thermoelectric material, J. Mater. Eng. Perform., 31, 6196, 10.1007/s11665-022-07084-w Kim, 2018, 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks, Nat. Energy, 3, 301, 10.1038/s41560-017-0071-2 Hu, 2023, SWCNTs/Ag2Se film with superior bending resistance and enhanced thermoelectric performance via in situ compositing, Chem. Eng. J., 457, 10.1016/j.cej.2022.141024 Sun, 2023, Advances in ionic thermoelectrics: from materials to devices, Adv. Energy Mater., 10.1002/aenm.202203692 Ao, 2022, Assembly-free fabrication of high-performance flexible inorganic thin-film thermoelectric device prepared by a thermal diffusion, Adv. Energy Mater., 12, 10.1002/aenm.202202731 Bile, 2018, Platinum resistance-copper wire manual tin welding parameter optimization based on process test, 132 Chen, 2020, Wearable fiber-based thermoelectrics from materials to applications, Nano Energy, 81 Wei, 2022, Directional thermal diffusion realizing inorganic Sb2Te3/Te hybrid thin films with high thermoelectric performance and flexibility, Adv. Funct. Mater., 32, 10.1002/adfm.202207903 Chen, 2022, Thermoelectric coolers for on-chip thermal management: materials, design, and optimization, Mater. Sci. Eng. R Rep., 151, 10.1016/j.mser.2022.100700 Sun, 2022, Cheap, large-scale, and high-performance graphite-based flexible thermoelectric materials and devices with supernormal industry feasibility, ACS Appl. Mater. Interfaces, 14, 8066, 10.1021/acsami.1c24649 Tan, 2021, Synergistic texturing and Bi/Sb-Te antisite doping secure high thermoelectric performance in Bi0.5Sb1.5Te3-based thin films, Adv. Energy Mater., 11, 10.1002/aenm.202102578 Liu, 2022, Facile fabrication of highly flexible, porous PEDOT:PSS/SWCNTs films for thermoelectric applications, Chin. Phys. B, 31 Wesolowski, 2012, Development of a Bi2Te3-based thermoelectric generator with high-aspect ratio, free-standing legs, J. Mater. Res., 27, 1149, 10.1557/jmr.2012.27 Yu, 2022, High-integration and high-performance micro thermoelectric generator by femtosecond laser direct writing for self-powered IoT devices, Nano Energy, 93, 10.1016/j.nanoen.2021.106818 Prabhakaran, 2020 You, 2022, Flexible Bi2Te3-based thermoelectric generator with an ultra-high power density, Appl. Therm. Eng., 202, 10.1016/j.applthermaleng.2021.117818 Wang, 2018, Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer, Appl. Energy, 215, 690, 10.1016/j.apenergy.2018.02.062 Liu, 2021, A wearable real-time power supply with a Mg3Bi2-based thermoelectric module, Cell. Rep. Phys. Sci., 2 Chen, 2020, Thermoelectric thin films: promising strategies and related mechanism on boosting energy conversion performance, J. Materiomics, 6, 494, 10.1016/j.jmat.2020.02.008 Kim, 2013, Thermoelectric power generation characteristics of a thin-film device consisting of electrodeposited n-Bi2Te3 and p-Sb2Te3 thin-film legs, J. Electron. Mater., 42, 2752, 10.1007/s11664-013-2671-3 Wang, 2020, Self-powered wearable pressure sensing system for continuous healthcare monitoring enabled by flexible thin-film thermoelectric generator, Nano Energy, 73, 10.1016/j.nanoen.2020.104773 Ren, 2021, High-performance wearable thermoelectric generator with self-healing, recycling, and Lego-like reconfiguring capabilities, Sci. Adv., 7, 10.1126/sciadv.abe0586 Kim, 2022, A thermoelectric generator comprising selenium-doped bismuth telluride on flexible carbon cloth with n-type thermoelectric properties, Ceram. Int., 48, 10852, 10.1016/j.ceramint.2021.12.302 Zhao, 2019, A honeycomb-like paper-based thermoelectric generator based on a Bi2Te3/bacterial cellulose nanofiber coating, Nanoscale, 11, 17725, 10.1039/C9NR06197E Lee, 2016, Woven-yarn thermoelectric textiles, Adv. Mater., 28, 5038, 10.1002/adma.201600709 Zhang, 2017, High-performance, flexible, and ultralong crystalline thermoelectric fibers, Nano Energy, 41, 35, 10.1016/j.nanoen.2017.09.019 Moshwan, 2019, Realizing high thermoelectric properties of snte via synergistic band engineering and structure engineering, Nano Energy, 65, 10.1016/j.nanoen.2019.104056 Zheng, 2023, Harvesting waste heat with flexible Bi2Te3 thermoelectric thin film, Nat. Sustain., 6, 180, 10.1038/s41893-022-01003-6 Fan, 2020, High-performance bismuth telluride thermoelectric thin films fabricated by using the two-step single-source thermal evaporation, J. Alloys Compd., 819, 10.1016/j.jallcom.2019.153027 Zheng, 2020, Enhancement of the thermoelectric properties of Bi2Te3 nanocrystal thin films by rapid annealing, Mater. Lett., 275, 10.1016/j.matlet.2020.128143 Madan, 2012, Enhanced performance of dispenser printed MA n-Type Bi2Te3 composite thermoelectric generators, ACS Appl. Mater. Interfaces, 4, 6117, 10.1021/am301759a Zhao, 2020, Decoupling phonon and carrier scattering at carbon nanotube/Bi2Te3 interfaces for improved thermoelectric performance, Carbon, 170, 191, 10.1016/j.carbon.2020.08.024 Li, 2020, A flexible thermoelectric device based on a Bi2Te3-carbon nanotube hybrid, J. Mater. Sci. Technol., 58, 80, 10.1016/j.jmst.2020.03.066 Feng, 2019, Enhanced antioxidation and thermoelectric properties of the flexible screen-printed Bi2Te3 Films through interface modification, ACS Appl. Energy Mater., 2, 2828, 10.1021/acsaem.9b00178 Wu, 2020, Nanoporous (00l)-oriented Bi2Te3 nanoplate film for improved thermoelectric performance, J. Alloys Compd., 828, 10.1016/j.jallcom.2020.154239 2022, A heat-harvesting film can also bend and bow, Nature, 612, 11, 10.1038/d41586-022-03773-7 Chen, 2022, Thermoelectric coolers: infinite potentials for finite localized microchip cooling, J. Mater. Sci. Technol., 121, 256, 10.1016/j.jmst.2021.12.069 Yang, 2007, Suitability of a thermoelectric power generator for implantable medical electronic devices, J. Phys. D Appl. Phys., 40, 5790, 10.1088/0022-3727/40/18/042 Ghafouri, 2008, A micro thermoelectric energy scavenger for a hybrid insect, 1249 Putra, 2010, The characterization of a cascade thermoelectric cooler in a cryosurgery device, Cryogenics, 50, 759, 10.1016/j.cryogenics.2010.10.002 Yang, 2013, A Prototype of an implantable thermoelectric generator for permanent power supply to body inside a medical device, J. Med. Device, 8 Nohay, 2020, Design and fabrication of a portable solar powered thermoelectric refrigerator for insulin storage, 150 Kong, 2005, Study of IC compatible on-chip thermoelectric coolers, Jpn. J. Appl. Phys., 44, 5736, 10.1143/JJAP.44.5736 Goncalves, 2006, Thermoelectric microstructures of Bi2Te3/Sb2Te3 for a self-calibrated micro-pyrometer, Sens. Actuator A-Phys., 130–131, 346, 10.1016/j.sna.2005.10.014 Chowdhury, 2009, On-chip cooling by superlattice-based thin-film thermoelectrics, Nat. Nanotechnol., 4, 235, 10.1038/nnano.2008.417 Aktakka, 2013, Post-CMOS FinFET integration of bismuth telluride and antimony telluride thin-film-based thermoelectric devices on SoI substrate, IEEE. Electron Device Lett., 34, 1334, 10.1109/LED.2013.2277693 Gong, 2022, A system level optimization of on-chip thermoelectric cooling via Taguchi-Grey method, Appl. Therm. Eng., 214, 10.1016/j.applthermaleng.2022.118845 Maneewan, 2004, Investigation on generated power of thermoelectric roof solar collector, Renew. Energy, 29, 743, 10.1016/j.renene.2003.10.005 Li, 2010, Design of a concentration solar thermoelectric generator, J. Electron. Mater., 39, 1522, 10.1007/s11664-010-1279-0 Park, 2013, Lossless hybridization between photovoltaic and thermoelectric devices, Sci. Rep., 3, 2123, 10.1038/srep02123 Kumar Bhukesh, 2020, Bismuth telluride (Bi2Te3) thermoelectric material as a transducer for solar energy application, Mater. Today Proc., 26, 3131, 10.1016/j.matpr.2020.02.646 Mahmoudinezhad, 2022, Experimental investigation on spectrum beam splitting photovoltaic–thermoelectric generator under moderate solar concentrations, Energy, 238, 10.1016/j.energy.2021.121988 Nuwayhid, 2003, Low cost stove-top thermoelectric generator for regions with unreliable electricity supply, Renew. Energy, 28, 205, 10.1016/S0960-1481(02)00024-1 Nuwayhid, 2005, Development and testing of a domestic woodstove thermoelectric generator with natural convection cooling, Energy Convers. Manag., 46, 1631, 10.1016/j.enconman.2004.07.006 Horio, 2006, Application of thermoelectric modules fabricated with (Bi,Sb)2(Te,Se)3 using rapid solidification technique for the projector system, 363 Kumar, 2019, Flexible hybrid piezoelectric-thermoelectric generator for harnessing electrical energy from mechanical and thermal energy, Energy Convers. Manag., 198, 10.1016/j.enconman.2019.111783 Yuan, 2020, Self-powered electronic skin with multisensory functions based on thermoelectric conversion, Adv. Mater. Technol., 5 Zadan, 2022, Liquid crystal elastomer with integrated soft thermoelectrics for shape memory actuation and energy harvesting, Adv. Mater., 9 Aivazov, 1997, Thermoelectric cooling container for medical applications, MRS Proc., 478, 279, 10.1557/PROC-478-279 Sun, 2022, Biomass-derived carbon for high-performance batteries: from structure to properties, Adv. Funct. Mater., 32 Cheng, 2022, Enhanced thermoelectric properties of Cu2SnSe3-based materials with Ag2Se addition, ACS Appl. Mater. Interfaces, 14, 5439, 10.1021/acsami.1c22590 Hadjistassou, 2013, Designing high efficiency segmented thermoelectric generators, Energy Convers. Manag., 66, 165, 10.1016/j.enconman.2012.07.030 Lorenzi, 2018, Theoretical efficiency of hybrid solar thermoelectric-photovoltaic generators, J. Appl. Phys., 124, 10.1063/1.5022569 Lou, 2020, Thermoelectric air conditioning undergarment for personal thermal management and HVAC energy saving, Energy Build., 226, 10.1016/j.enbuild.2020.110374 Zhang, 2022, Wide-temperature range thermoregulating e-skin design through a hybrid structure of flexible thermoelectric devices and phase change materials heat sink, EcoMat, 4, 10.1002/eom2.12253 Chen, 2023, Realizing high thermoelectric performance in n-type Bi2Te3 based thin films via post-selenization diffusion, J. Materiomics, 10.1016/j.jmat.2023.01.003 Chiba, 2023, High thermoelectric performance of flexible nanocomposite films based on Bi2Te3 nanoplates and carbon nanotubes selected using ultracentrifugation, Sci. Rep., 13, 3010, 10.1038/s41598-023-30175-0 Wang, 2022, Direct ink writing of high-performance Bi2Te3-based thermoelectric materials using quasi-inorganic inks and interface engineering, J. Mater. Chem. A, 10, 12921, 10.1039/D2TA02289C Li, 2022, Fine-tuning Bi2Te3-copper selenide alloys enables an efficient n-type thermoelectric conversion, Molecules, 27, 8183, 10.3390/molecules27238183