Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration
Tóm tắt
Từ khóa
Tài liệu tham khảo
Virani, 2020, Heart disease and stroke statistics-2020 update: a report from the American heart association, Circulation, 141, e139, 10.1161/CIR.0000000000000757
Riggs, 2020, Adult congenital heart disease: current early expectations after cardiac transplantation, Ann. Thorac. Surg., 109, 480, 10.1016/j.athoracsur.2019.06.067
Hernandez, 2020, Heart transplantation and in-hospital outcomes in adult congenital heart disease patients with Fontan: a decade nationwide analysis from 2004 to 2014, J. Card. Surg., 35, 603, 10.1111/jocs.14430
Tomov, 2019, Engineering functional cardiac tissues for regenerative medicine applications, Curr. Cardiol. Rep., 21, 105, 10.1007/s11886-019-1178-9
Takahashi, 2007, Induction of pluripotent stem cells from adult human fibroblasts by defined factors, Cell, 131, 861, 10.1016/j.cell.2007.11.019
Yu, 2007, Induced pluripotent stem cell lines derived from human somatic cells, Science, 318, 1917, 10.1126/science.1151526
Ieda, 2010, Direct reprogramming of fibroblasts into functional cardiomyocytes by defined factors, Cell, 142, 375, 10.1016/j.cell.2010.07.002
Mohamed, 2017, Chemical enhancement of in vitro and in vivo direct cardiac reprogramming, Circulation, 135, 978, 10.1161/CIRCULATIONAHA.116.024692
Huang, 2018, Heterogeneity of adult masseter muscle satellite cells with cardiomyocyte differentiation potential, Exp. Cell Res., 371, 20, 10.1016/j.yexcr.2018.05.028
Chen, 2018, Establishment and identification of a CiPSC lineage reprogrammed from FSP-tdTomato mouse embryonic fibroblasts (MEFs), Stem Cell. Int., 5965727
Wang, 2019, Induction of pluripotent stem cells from mouse embryonic fibroblasts by jdp2-jhdm1b-mkk6-glis1-nanog-essrb-sall4, Cell Rep., 27, 3473, 10.1016/j.celrep.2019.05.068
Asghari, 2017, Biodegradable and biocompatible polymers for tissue engineering application: a review, artif. Cells nanomed, Biotechnol., 45, 185
Liu, 2018, Fabrication of engineered nanoparticles on biological macromolecular (PEGylated chitosan) composite for bio-active hydrogel system in cardiac repair applications, Int. J. Biol. Macromol., 117, 553, 10.1016/j.ijbiomac.2018.04.196
Yang, 2019, Functionalization of novel theranostic hydrogels with kartogenin-grafted USPIO nanoparticles to enhance cartilage regeneration, ACS Appl. Mater. Interfaces, 11, 34744, 10.1021/acsami.9b12288
Amir, 2017, Three-dimensional bioprinting: toward the era of manufacturing human organs as spare parts for healthcare and medicine, Tissue Eng. B Rev., 23, 245, 10.1089/ten.teb.2016.0398
Ong, 2018, 3D and 4D bioprinting of the myocardium: current approaches, challenges, and future prospects, BioMed Res. Int., 10.1155/2018/6497242
Ma, 2018, 3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling, Adv. Drug Deliv. Rev., 132, 235, 10.1016/j.addr.2018.06.011
Shao, 2020
Pitaktong, 2020, Early vascular cells improve microvascularization within 3D cardiac spheroids, Tissue Eng. C Methods, 26, 80, 10.1089/ten.tec.2019.0228
Enriquez, 2018, Use of intracardiac echocardiography in interventional cardiology: working with the anatomy rather than fighting it, Circulation, 137, 2278, 10.1161/CIRCULATIONAHA.117.031343
Adhyapak, 2010, Architecture of the left ventricle: insights for optimal surgical ventricular restoration, Heart Fail. Rev., 15, 73, 10.1007/s10741-009-9151-0
Sanz, 2019, Anatomy, function, and dysfunction of the right ventricle: JACC state-of-the-art review, J. Am. Coll. Cardiol., 73, 1463, 10.1016/j.jacc.2018.12.076
Sommer, 2015, Biomechanical properties and microstructure of human ventricular myocardium, Acta Biomater., 24, 172, 10.1016/j.actbio.2015.06.031
Abdeltawab, 2020, A deep learning-based approach for automatic segmentation and quantification of the left ventricle from cardiac cine MR images, Comput. Med. Imag. Graph., 81, 101717, 10.1016/j.compmedimag.2020.101717
Spertus, 2020, Health-status outcomes with invasive or conservative care in coronary disease, N. Engl. J. Med., 382, 1408, 10.1056/NEJMoa1916370
de Soysa, 2019, Single-cell analysis of cardiogenesis reveals basis for organ-level developmental defects, Nature, 572, 120, 10.1038/s41586-019-1414-x
Spellberg, 2020, Evaluation of a paradigm shift from intravenous antibiotics to oral step-down therapy for the treatment of infective endocarditis: a narrative review, JAMA Intern. Med., 180, 769, 10.1001/jamainternmed.2020.0555
Shudo, 2019, Evaluation of risk factors for heart-lung transplant recipient outcome: an analysis of the united network for organ sharing database, Circulation, 140, 1261, 10.1161/CIRCULATIONAHA.119.040682
Alonzo, 2019, 3D Bioprinting of cardiac tissue and cardiac stem cell therapy, Transl. Res., 211, 64, 10.1016/j.trsl.2019.04.004
Kelly, 2019, Volumetric additive manufacturing via tomographic reconstruction, Science, 63, 1075, 10.1126/science.aau7114
McCormack, 2020, 3D printing in suspension baths: keeping the promises of bioprinting afloat, Trends Biotechnol., S0167–7799
O'Connell, 2020, Characterizing bioinks for extrusion bioprinting: printability and rheology, Methods Mol. Biol., 2140, 111, 10.1007/978-1-0716-0520-2_7
Ostrovidov, 2019, 3D bioprinting in skeletal muscle tissue engineering, Small, 15, 10.1002/smll.201805530
Heinrich, 2019, 3D bioprinting: from benches to translational applications, Small, 15, 10.1002/smll.201970126
Mironov, 2009, Organ printing: tissue spheroids as building blocks, Biomaterials, 30, 2164, 10.1016/j.biomaterials.2008.12.084
Gauvin, 2012, Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography, Biomaterials, 33, 3824, 10.1016/j.biomaterials.2012.01.048
Ahn, 2016, Three-dimensional bio-printing equipment technologies for tissue engineering and regenerative medicine, Tissue Eng. Regen. Med., 13, 663, 10.1007/s13770-016-0148-1
Moncal, 2019, Thermally-controlled extrusion-based bioprinting of collagen, J. Mater. Sci. Mater. Med., 30, 55, 10.1007/s10856-019-6258-2
Levato, 2020, From shape to function: the next step in bioprinting, Adv. Mater., 32, 10.1002/adma.201906423
Yang, 2019, 4D bioprinting: technological advances in biofabrication, Macromol. Biosci., 19, 10.1002/mabi.201800441
Oliveira, 2019, Advances in bioinks and in vivo imaging of biomaterials for CNS applications, Acta Biomater., 95, 60, 10.1016/j.actbio.2019.05.006
Parak, 2019, Functionalizing bioinks for 3D bioprinting applications, Drug Discov. Today, 24, 198, 10.1016/j.drudis.2018.09.012
Bejleri, 2019, Decellularized extracellular matrix materials for cardiac repair and regeneration, Adv. Healthc. Mater., 8, 10.1002/adhm.201801217
Dobos, 2019, Thiol-Gelatin-norbornene bioink for laser-based high-definition bioprinting, Adv. Healthc. Mater., 26
Choudhury, 2018, Organ-derived decellularized extracellular matrix: a game changer for bioink manufacturing?, Trends Biotechnol., 36, 787, 10.1016/j.tibtech.2018.03.003
Konta, 2017, Personalised 3D printed medicines: which techniques and polymers are more successful?, Bioengineering, 4, E79, 10.3390/bioengineering4040079
Datta, 2020, Biomolecules-derived biomaterials, Biomaterials, 230, 119633, 10.1016/j.biomaterials.2019.119633
Ji, 2019, 3D bioprinting of complex channels within cell-laden hydrogels, Acta Biomater., 95, 214, 10.1016/j.actbio.2019.02.038
Jeong, 2020, 3D bioprinting strategies for the regeneration of functional tubular tissues and organs, Bioengineering, 7, E32, 10.3390/bioengineering7020032
Jia, 2019, Bottom-up synthetic biology: reconstitution in space and time, Curr. Opin. Biotechnol., 60, 179, 10.1016/j.copbio.2019.05.008
Crook, 2020, Bioprinting 3D human induced pluripotent stem cell constructs for multilineage tissue engineering and modeling, Methods Mol. Biol., 2140, 251, 10.1007/978-1-0716-0520-2_17
Crook, 2020, Cell processing for 3D bioprinting: quality requirements for quality assurance in fundamental research and translation, Methods Mol. Biol., 2140, 19, 10.1007/978-1-0716-0520-2_2
Ngan, 2020, 3D bioprinting and differentiation of primary skeletal muscle progenitor cells, Methods Mol. Biol., 2140, 229, 10.1007/978-1-0716-0520-2_15
Zimmermann, 2019, High resolution bioprinting of multi-component hydrogels, Biofabrication, 11, 10.1088/1758-5090/ab2aa1
Mirani, 2019, A 3D bioprinted hydrogel mesh loaded with all-trans retinoic acid for treatment of glioblastoma, Eur. J. Pharmacol., 854, 201, 10.1016/j.ejphar.2019.04.007
Frost, 2019, Gradient poly(ethylene glycol) diacrylate and cellulose nanocrystals tissue engineering composite scaffolds via extrusion bioprinting, Front. in Bioeng. and Biotechnol., 7, 280, 10.3389/fbioe.2019.00280
Silbernagel, 2020, Shaping the heart: structural and functional maturation of iPSC-cardiomyocytes in 3D-micro-scaffolds, Biomaterials, 227, 119551, 10.1016/j.biomaterials.2019.119551
Murphy, 2019, Opportunities and challenges of translational 3D bioprinting, Nat. Biomed. Eng., 4, 370, 10.1038/s41551-019-0471-7
Correia, 2019, 3D bioprinting: the emergence of programmable biodesign, Adv. Healthc Mater.
Thattaruparambil, 2019, Optimization of 3D bioprinting of periodontal ligament cells, Dent, Materials, 35, 1683
Neto, 2019, Microparticles in contact with cells: from carriers to multifunctional tissue modulators, Trends Biotechnol., 37, 1011, 10.1016/j.tibtech.2019.02.008
Gaspar, 2020, Advanced bottom-up engineering of living architectures, Adv. Mater., 32, 10.1002/adma.201903975
Birla, 2020, 3D bioprinting and its potential impact on cardiac failure treatment: an industry perspective, APL Bioeng, 4, 10.1063/1.5128371
Izadifar, 2018, UV-assisted 3D bioprinting of nanoreinforced hybrid cardiac patch for myocardial tissue engineering, Tissue Eng. C Methods, 24, 74, 10.1089/ten.tec.2017.0346
Zou, 2020, Biofabrication of valentine-shaped heart with a composite hydrogel and sacrificial material, Mater. Sci. Eng. C Mater. Biol. Appl., 108, 110205, 10.1016/j.msec.2019.110205
Tsukamoto, 2020, Vascularized cardiac tissue construction with orientation by layer-by-layer method and 3D printer, Sci. Rep., 10, 5484, 10.1038/s41598-020-59371-y
Das, 2019, Decellularized extracellular matrix bioinks and the external stimuli to enhance cardiac tissue development in vitro, Acta Biomater., 95, 188, 10.1016/j.actbio.2019.04.026
Maiullari, 2018, A multi-cellular 3D bioprinting approach for vascularized heart tissue engineering based on HUVECs and iPSC-derived cardiomyocytes, Sci. Rep., 8, 13532, 10.1038/s41598-018-31848-x
Ren, 2019, Canonical Wnt5b signaling directs outlying Nkx2.5+ mesoderm into pacemaker cardiomyocytes, Dev. Cell, 50, 729, 10.1016/j.devcel.2019.07.014
Yeung, 2019, Cardiac regeneration using human-induced pluripotent stem cell-derived biomaterial-free 3D-bioprinted cardiac patch in vivo, J. Tissue Eng. Regen. Med., 13, 2031, 10.1002/term.2954
Burns, 2019, Canonical Wnt signaling sets the pace, Dev. Cell, 50, 675, 10.1016/j.devcel.2019.09.002
Karbassi, 2020, Cardiomyocyte maturation: advances in knowledge and implications for regenerative medicine, Nat. Rev. Cardiol., 17, 341, 10.1038/s41569-019-0331-x
Christoffels, 2020, Cardiac morphogenesis: specification of the four-chambered heart, Cold Spring Harb. Perspect. Biol., 10.1101/cshperspect.a037143
Zhao, 2020, Subtype-specific cardiomyocytes for precision medicine: where are we now?, Stem Cell., 10.1002/stem.3178
Datta, 2017, Bioprinting for vascular and vascularized tissue biofabrication, Acta Biomater., 51, 1, 10.1016/j.actbio.2017.01.035
Datta, 2018, Essential steps in bioprinting: from pre- to post-bioprinting, Biotechnol. Adv., 36, 1481, 10.1016/j.biotechadv.2018.06.003
Yan, 2018, 3D bioprinting of skin tissue: from pre-processing to final product evaluation, Adv. Drug Deliv. Rev., 132, 270, 10.1016/j.addr.2018.07.016
Ostrovidov, 2019, 3D bioprinting in skeletal muscle tissue engineering, Small, 15, 10.1002/smll.201805530
Lim, 2020, Fundamentals and applications of photo-cross-linking in bioprinting, Chem. Rev., 120, 10662, 10.1021/acs.chemrev.9b00812
Yin, 2018, 3D bioprinting of low-concentration cell-laden gelatin methacrylate (GelMA) bioinks with a two-step cross-linking strategy, ACS Appl. Mater. Interfaces, 10, 6849, 10.1021/acsami.7b16059
Bejleri, 2018, A bioprinted cardiac patch composed of cardiac-specific extracellular matrix and progenitor cells for heart repair, Adv. Healthc. Mater., 7, 10.1002/adhm.201800672
Yu, 2019, Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix, Biomaterials, 194, 1, 10.1016/j.biomaterials.2018.12.009
Liu, 2019, Rapid 3D bioprinting of in vitro cardiac tissue models using human embryonic stem cell-derived cardiomyocytes, Bioprinting, 13, 10.1016/j.bprint.2019.e00040
Wang, 2018, 3D bioprinted functional and contractile cardiac tissue constructs, Acta Biomater., 70, 48, 10.1016/j.actbio.2018.02.007
van der Valk, 2018, Engineering a 3D-bioprinted model of human heart valve disease using nanoindentation-based biomechanics, Nanomaterials, 8, E296, 10.3390/nano8050296
Koti, 2019, Use of GelMA for 3D printing of cardiac myocytes and fibroblasts, J. 3D Print. Med., 3, 11, 10.2217/3dp-2018-0017
Kupfer, 2020, In situ expansion, differentiation and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid, Circ. Res., 127, 207, 10.1161/CIRCRESAHA.119.316155
Bouguéon, 2019, Micro- and nano-formulations for bioprinting and additive manufacturing, Drug Discov. Today, 24, 163, 10.1016/j.drudis.2018.10.013
Masaeli, 2020, Direct-write bioprinting approach to construct multilayer cellular tissues, Front. Bioeng. Biotechnol., 7, 478, 10.3389/fbioe.2019.00478
Patel, 2019, Aligned nanofibers of decellularized muscle ECM support myogenic activity in primary satellite cells in vitro, Biomed, Materials, 14
Kabirian, 2019, Decellularized ECM-derived bioinks: prospects for the future, Methods, S1046–2023
Dzobo, 2019, Recent trends in decellularized extracellular matrix bioinks for 3D printing: an updated review, Int. J. Mol. Sci., 20, E4628, 10.3390/ijms20184628
Alexanian, 2020, Induced cardiac progenitor cells repopulate decellularized mouse heart scaffolds and differentiate to generate cardiac tissue, Biochim. Biophys. Acta Mol. Cell Res., 1867, 118559, 10.1016/j.bbamcr.2019.118559
Brink, 2020, 9th ascona international workshop on cardiomyocyte biology, Biochim. Biophys. Acta Mol. Cell Res., 1867, 118618, 10.1016/j.bbamcr.2019.118618
Traverse, 2019, First-in-Man study of a cardiac extracellular matrix hydrogel in early and late myocardial infarction patients, JACC (J. Am. Coll. Cardiol.): Basic Transl. Sci., 4, 659
Wang, 2019, Decellularized neonatal cardiac extracellular matrix prevents widespread ventricular remodeling in adult mammals after myocardial infarction, Acta Biomater., 87, 140, 10.1016/j.actbio.2019.01.062
Spector, 2020, Decellularized tissues and organs: an historical perspective and prospects for the future, Biomed. Mater., 11, 10.1088/1748-6041/11/2/020201
Hussey, 2020, Ultrasonic cavitation to prepare ECM hydrogels, Acta Biomater., 108, 77, 10.1016/j.actbio.2020.03.036
Lee, 2019, 3D bioprinting of collagen to rebuild components of the human heart, Science, 365, 482, 10.1126/science.aav9051
Qian, 2019, Engineering stem cell cardiac patch with microvascular features representative of native myocardium, Theranostics, 9, 2143, 10.7150/thno.29552
Garcia-Puig, 2019, Proteomics analysis of extracellular matrix remodeling during zebrafish heart regeneration, Mol. Cell. Proteomics, 18, 1745, 10.1074/mcp.RA118.001193
Sart, 2020
Fay, 2020, Computer-aided design and manufacturing (CAD/CAM) for bioprinting, Methods Mol. Biol., 2140, 27, 10.1007/978-1-0716-0520-2_3
Gorabi, 2017, Cells, scaffolds and their interactions in myocardial tissue regeneration, J. Cell. Biochem., 118, 2454, 10.1002/jcb.25912
Lee, 2020
Tomaskovic-Crook, 2020, 3D bioprinting electrically conductive bioink with human neural stem cells for human neural tissues, Methods Mol. Biol., 2140, 159, 10.1007/978-1-0716-0520-2_10
Miri, 2019, Effective bioprinting resolution in tissue model fabrication, Lab Chip, 19, 2019, 10.1039/C8LC01037D
Matai, 2020, Progress in 3D bioprinting technology for tissue/organ regenerative engineering, Biomaterials, 226, 119536, 10.1016/j.biomaterials.2019.119536
Blaeser, 2016, Controlling shear stress in 3D bioprinting is a key factor to balance printing resolution and stem cell integrity, Adv. Healthc. Mater., 5, 326, 10.1002/adhm.201500677
Schwartz, 2020, Cell encapsulation in gelatin bioink impairs 3D bioprinting resolution, J. Mech. Behav. Biomed. Mater., 103, 103524, 10.1016/j.jmbbm.2019.103524
Noor, 2019, 3D printing of personalized thick and perfusable cardiac patches and hearts, Adv. Sci., 6, 1900344, 10.1002/advs.201900344
Corbett, 2019, A FRESH take on resolution in 3D bioprinting, Trends Biotechnol., 37, 1153, 10.1016/j.tibtech.2019.09.003
Anil Kumar, 2019, A visible light-cross-linkable, fibrin-gelatin-based bioprinted construct with human cardiomyocytes and fibroblasts, ACS Biomater. Sci. Eng., 5, 4551, 10.1021/acsbiomaterials.9b00505
Lee, 2020, Guiding lights: tissue bioprinting using photoactivated materials, Chem. Rev., 120, 10950, 10.1021/acs.chemrev.0c00077
Magalhães, 2020, Printing 3D hydrogel structures employing low-cost stereolithography technology, J. Funct. Biomater., 11, 10.3390/jfb11010012
Zhu, 2018, A general strategy for extrusion bioprinting of bio-macromolecular bioinks through alginate-templated dual-stage crosslinking, Macromol. Biosci., 18, 10.1002/mabi.201800127
Valot, 2019, Chemical insights into bioinks for 3D printing, Chem. Soc. Rev., 48, 4049, 10.1039/C7CS00718C
Paxton, 2017, Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability, Biofabrication, 9, 10.1088/1758-5090/aa8dd8
Emmermacher, 2020, Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle, Biofabrication, 12, 10.1088/1758-5090/ab7553
Bianco, 2020, Myocardial mechanics in patients with normal LVEF and diastolic dysfunction, JACC Cardiovasc. Imaging., 13, 258, 10.1016/j.jcmg.2018.12.035
Zhang, 2020, ECM concentration and cell-mediated traction forces play a role in vascular network assembly in 3D bioprinted tissue, Biotechnol. Bioeng., 117, 1148, 10.1002/bit.27250
Chimene, 2020, Hydrogel bioink reinforcement for additive manufacturing: a focused review of emerging strategies, Adv. Mater., 32, 10.1002/adma.201902026
Townsend, 2019, Flow behavior prior to crosslinking: the need for precursor rheology for placement of hydrogels in medical applications and for 3D bioprinting, Prog. Polym. Sci., 91, 126, 10.1016/j.progpolymsci.2019.01.003
Heo, 2020, 3D bioprinting of carbohydrazide-modified gelatin into microparticle-suspended oxidized alginate for the fabrication of complex-shaped tissue constructs, ACS Appl. Mater. Interfaces, 12, 20295, 10.1021/acsami.0c05096
Yan, 2020, Soft three-dimensional network materials with rational bio-mimetic designs, Nat. Commun., 11, 1180, 10.1038/s41467-020-14996-5
Ribeiro, 2017, Assessing bioink shape fidelity to aid material development in 3D bioprinting, Biofabrication, 10, 10.1088/1758-5090/aa90e2
Ahlfeld, 2020, A novel plasma-based bioink stimulates cell proliferation and differentiation in bioprinted, mineralized constructs, ACS Appl. Mater. Interfaces, 12, 12557, 10.1021/acsami.0c00710
Patrício, 2020
Li, 2020
Qasim, 2019, 3D printing approaches for cardiac tissue engineering and role of immune modulation in tissue regeneration, Int. J. Nanomed., 14, 1311, 10.2147/IJN.S189587
Kristen, 2020, Fiber scaffold patterning for mending hearts: 3D organization bringing the next step, Adv. Healthc. Mater., 9, 10.1002/adhm.201900775
Marques, 2019, The missing links within troponin, Arch. Biochem. Biophys., 663, 95, 10.1016/j.abb.2018.12.026
Johnston, 2019, The intrinsically disordered C terminus of troponin T binds to troponin C to modulate myocardial force generation, J. Biol. Chem., 294, 20054, 10.1074/jbc.RA119.011177
Chen, 2017, Loss of smooth muscle α-actin leads to NF-κB-Dependent increased sensitivity to angiotensin II in smooth muscle cells and aortic enlargement, Circ. Res., 120, 1903, 10.1161/CIRCRESAHA.117.310563
Schuerlein, 2017, A versatile modular bioreactor platform for Tissue Engineering, Biotechnol. J., 12, 10.1002/biot.201600326
de Bournonville, 2019, Towards self-regulated bioprocessing: a compact benchtop bioreactor system for monitored and controlled 3D cell and tissue culture, Biotechnol. J., 14, 10.1002/biot.201800545
Baroni, 2019, A false positive case of high-sensitivity cardiac troponin in a patient with acute chest pain: analytical study of the interference, Clin. Biochem., 66, 103, 10.1016/j.clinbiochem.2019.02.002
Soler-Botija, 2020, Spotlight on epigenetic reprogramming in cardiac regeneration, Semin, Cell Dev. Biol., 97, 26
Sereti, 2018, Analysis of cardiomyocyte clonal expansion during mouse heart development and injury, Nat. Commun., 9, 754, 10.1038/s41467-018-02891-z
Richards, 2020, Human cardiac organoids for the modelling of myocardial infarction and drug cardiotoxicity, Nat. Biomed. Eng., 4, 446, 10.1038/s41551-020-0539-4
Jakovljevic, 2018, Physical activity and cardiovascular aging: physiological and molecular insights, Exp. Gerontol., 109, 67, 10.1016/j.exger.2017.05.016
Chikae, 2019, Three-dimensional bioprinting human cardiac tissue chips of using a painting needle method, Biotechnol, Bioengineered, 116, 3136, 10.1002/bit.27126
Palmquist-Gomes, 2019, Cell-based therapies for the treatment of myocardial infarction: lessons from cardiac regeneration and repair mechanisms in non-human vertebrates, Heart Fail. Rev., 24, 133, 10.1007/s10741-018-9750-8
Lemoine, 2018, Human induced pluripotent stem cell-derived engineered heart tissue as a sensitive test system for QT prolongation and arrhythmic triggers, Circ. Arrhythm. Electrophysiol., 11, 10.1161/CIRCEP.117.006035
Zhao, 2019, A platform for generation of chamber-specific cardiac tissues and disease modeling, Cell, 176, 913, 10.1016/j.cell.2018.11.042
Sadek, 2020, Toward the goal of human heart regeneration, Cell Stem Cell, 26, 7, 10.1016/j.stem.2019.12.004
Nair, 2020, Stem cell therapy in heart failure: where do we stand today?, Biochim. Biophys. Acta (BBA) - Mol. Basis Dis., 1866, 165489, 10.1016/j.bbadis.2019.06.003
Ladd, 2019, Assessing cardiomyocyte excitation-contraction coupling site detection from live cell imaging using a structurally-realistic computational model of calcium release, Front. Physiol., 10, 1263, 10.3389/fphys.2019.01263
Scranton, 2020, Modulation of the cardiac Na+-Ca2+ exchanger by cytoplasmic protons: molecular mechanisms and physiological implications, Cell Calcium, 87, 102140, 10.1016/j.ceca.2019.102140
Chazin, 2020, Calmodulin mutations associated with heart arrhythmia: a status report, Int. J. Mol. Sci., 21, E1418, 10.3390/ijms21041418
Moore, 2020, Tugging at the heart strings: the septin cytoskeleton in heart development and disease, J. Cardiovasc. Dev. Dis., 7
Guo, 2020, Stem cell-derived cell sheet transplantation for heart tissue repair in myocardial infarction, Stem Cell Res. Ther., 11, 19, 10.1186/s13287-019-1536-y
Park, 2020, Modular design of a tissue engineered pulsatile conduit using human induced pluripotent stem cell-derived cardiomyocytes, Acta Biomater., 102, 220, 10.1016/j.actbio.2019.10.019
Tang, 2018, Targeted repair of heart injury by stem cells fused with platelet nanovesicles, Nat. Biomed. Eng., 2, 17, 10.1038/s41551-017-0182-x
Khorramirouz, 2019, Evaluating the efficacy of tissue-engineered human amniotic membrane in the treatment of myocardial infarction, Regen. Med., 14, 113, 10.2217/rme-2018-0024
Correia Carreira, 2019, 3D bioprinting: the emergence of programmable biodesign, Adv. Healthc. Mater.
Gardin, 2020, Recent applications of three dimensional printing in cardiovascular medicine, Cells, 9, E742, 10.3390/cells9030742
Tang, 2020, Deconstructing, replicating, and engineering tissue microenvironment for stem cell differentiation, Tissue Eng. B Rev., 2020
Yu, 2020, Photopolymerizable biomaterials and light-based 3D printing strategies for biomedical application, Chem. Rev., 120, 10695, 10.1021/acs.chemrev.9b00810
Miao, 2020, 4D self-morphing culture substrate for modulating cell differentiation, Adv. Sci., 7, 1902403, 10.1002/advs.201902403
Soler-Botija, 2020, Spotlight on epigenetic reprogramming in cardiac regeneration, Semin, Cell Dev. Biol., 97, 26