Advanced mechanical properties of nickel‐aluminum bronze/steel composite structure prepared by wire‐arc additive manufacturing

Lv, 2020, Optimal microstructures on fatigue properties of friction stir processed NiAl bronze alloy and its resistant fatigue crack growth mechanism, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 771, 10.1016/j.msea.2019.138577 Dharmendra, 2020, Wire-arc additive manufactured nickel aluminum bronze with enhanced mechanical properties using heat treatments cycles, Addit. Manuf., 36 Luo, 2017, Surface modification of nickel-aluminum bronze alloy with gradient Ni-Cu solid solution coating via thermal diffusion, Surf. Coat. Technol., 309, 106, 10.1016/j.surfcoat.2016.11.013 Culpan, 1978, Microstructural characterization of cast nickel aluminium bronze, J. Mater. Sci., 13, 1647, 10.1007/BF00548728 Anantapong, 2014, Effect of hot working on microstructure evolution of as-cast nickel aluminum bronze alloy, Mater. Des., 60, 233, 10.1016/j.matdes.2014.03.033 Lv, 2022, Insights into the selective phase corrosion of as cast NiAl bronze alloy: effect of electrical properties of each phase's protective film, J. Alloy. Compd., 891, 10.1016/j.jallcom.2021.162008 Rajakumar, 2018, Corrosion performance of friction surfaced nickel aluminium bronze (NAB) alloy under erosion corrosion and salt fog environment, Corros. Eng. Sci. Technol., 53, 21, 10.1080/1478422X.2018.1425178 Song, 2013, Comparison of corrosion and cavitation erosion behaviors between the as-cast and friction-stir-processed nickel aluminum bronze, Corrosion, 69, 1111, 10.5006/0984 C. Feng, Y. Xie, J. Wang, Y. Long, W. Chen, D.K. Li, W.B. Li, K.J. Ouyang, Improved mechanical properties and corrosion resistance of nickel-aluminum bronze (NAB) alloys by controlling the grain size of Ni coatings, Int. J. Electrochem. Sci. 13(8) (2018) 7907–7922. doi:10.20964/2018.08.40. Wharton, 2005, The corrosion of nickel-aluminium bronze in seawater, Corros. Sci., 47, 3336, 10.1016/j.corsci.2005.05.053 Qin, 2018, Microstructure design to improve the corrosion and cavitation corrosion resistance of a nickel-aluminum, Corros. Sci., 139, 255, 10.1016/j.corsci.2018.04.043 Miettinen, 2003, Thermodynamic description of the Cu-Al-Fe system at the Cu-Fe side, Calphad-Comput. Coupling Ph. Diagrams Thermochem., 27, 91, 10.1016/S0364-5916(03)00034-8 Barr, 2015, Transformation of lamellar structures in equal channel angular pressing: geometric model and application to nickel aluminum bronze, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 46, 4202, 10.1007/s11661-015-2994-1 Tang, 2006, Laser surface alloying of a marine propeller bronze using aluminium powder Part II: Corrosion and erosion-corrosion synergism, Surf. Coat. Technol., 200, 2594, 10.1016/j.surfcoat.2004.12.022 Tang, 2004, Effect of laser surface melting on the corrosion and cavitation erosion behaviors of a manganese-nickel-aluminium bronze, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 373, 195, 10.1016/j.msea.2004.01.016 Siva, 2019, Microstructure and mechanical properties of exothermic-reaction-assisted friction-stir-welded nickel-aluminum bronze alloy, J. Mater. Eng. Perform., 28, 2256, 10.1007/s11665-019-03968-6 Perez, 2022, Use of nanotechnology to mitigate biofouling in stainless steel devices used in food processing, healthcare, and marine environments, Toxics, 10, 35, 10.3390/toxics10010035 Nasiriardali, 2022, Improvement of biological and corrosion behavior of 316 L stainless steel using PDMS-Ag doped Willemite nanocomposite coating, Prog. Org. Coat., 165, 25 Zisook, 2020, Emissions associated with operations of four different additive manufacturing or 3D printing technologies, J. Occup. Environ. Hyg., 17, 464, 10.1080/15459624.2020.1798012 Shakor, 2019, Review of emerging additive manufacturing technologies in 3D printing of cementitious materials in the construction industry, Front. Built Environ., 4, 10.3389/fbuil.2018.00085 Dharmendra, 2020, Wire-arc additive manufacturing of nickel aluminum bronze/stainless steel hybrid parts - interfacial characterization, prospects, and problems, Materialia., 13, 19, 10.1016/j.mtla.2020.100834 Murray, 2020, Selective laser melting of nickel aluminium bronze, Addit. Manuf., 33, 42 Wang, 2021, Microstructure and mechanical properties of additively manufactured Ni-Al bronze parts using cold metal transfer process, Front. Mater., 8, 529, 10.3389/fmats.2021.739542 Dharmendra, 2021, Metallurgical assessment of additive manufactured nickel aluminum bronze-316L stainless steel bimetallic structure: effect of deposit geometry on the interfacial characteristics and cracking, J. Mater. Eng. Perform., 30, 8746, 10.1007/s11665-021-06194-1 Vazquez, 2020, Influence of interpass cooling conditions on microstructure and tensile properties of Ti-6Al-4V parts manufactured by WAAM, Weld. World, 64, 1377, 10.1007/s40194-020-00921-3 Cui, 2009, Effect of composion on the microstructure of directionalIy solidfied AI-In monotectic alloy with high temperature gradient casting technology, Found. Technol., 30, 642 Dharmendra, 2021, Characterization of kappa-precipitates in wire-arc additive manufactured nickel aluminum bronze: a combined transmission Kikuchi diffraction and atom probe tomography study, Addit. Manuf., 46, 41 Brezina, 1982, Reviews, heat treatment of complex aluminium bronzes, Inter. Metal. Rev., 27, 77, 10.1179/imr.1982.27.1.77 Swann, 1963, Electron-metallography and crystallography of copper-aluminun martensites, Acta Metall., 11, 511, 10.1016/0001-6160(63)90086-5 Tadaki, 1988, Shape memory alloys, Annu. Rev. Mater. Sci., 18, 25, 10.1146/annurev.ms.18.080188.000325 Nishiyama, 1965, Stacking faults in the martensite of Cu-Al alloy, J. Phys. Soc. Jpn., 20, 1192, 10.1143/JPSJ.20.1192 Duggin, 1964, The nature of the martensite transformation in a coppernickel-aluminium alloy, Acta Metall., 12, 529, 10.1016/0001-6160(64)90025-2 Duggin, 1966, Further studies of martensitic transformations in gold-copper-zinc and copper-aluminium-nickel alloys, Acta Metall., 14, 123, 10.1016/0001-6160(66)90293-8 Romanov, 1995, Structure formation during the sintering of powder steels alloyed with copper, chromium, and phosphorous, Powder Metall. Met. Ceram., 34, 276, 10.1007/BF00560130 Radushev, 2006, Extraction and complexing of copper(II) with benzoic acid N, N-dihexylhydrazide, Russ. J. Inorg. Chem., 51, 1973, 10.1134/S0036023606120217 Shin, 2013, Investigation on the decomposition of Al2O3 using an electrochemical method, ISIJ Int., 53, 434, 10.2355/isijinternational.53.434 Chen, 2020, Elimination of liquid metal embrittlement cracks during arc cladding of tin bronze on steel sheet, Mater. Lett., 269, 10.1016/j.matlet.2020.127646 Sueyoshi, 2008, Properties of soldering Cu/Fe alloy produced by powder metallurgy, Mater. Trans., 49, 2881, 10.2320/matertrans.MRA2008112 Kangazian, 2019, Micro-texture and corrosion behavior of dissimilar joints of UNS S32750 stainless steel/UNS N08825 Ni-based superalloy, Mater. Charact., 155, 57, 10.1016/j.matchar.2019.109802 Wang, 2020, First–principles study on stacking fault energy of γ–Fe–Mn alloys, Met. Mater. Int., 27, 3205, 10.1007/s12540-020-00821-7 Yang, 2021, Mechanism of Mn on inhibiting Fe-caused magnesium corrosion, J. Magnes. Alloy., 9, 676, 10.1016/j.jma.2020.09.015 Naiben, 1988, The stacking fault growth mechanism and its kinetics, Acta Phys. Sin., 37, 789, 10.7498/aps.37.789 Lv, 2022, Stacking fault and nano-twins dominating strengthening mechanism of (CuZnMnNi)100-xSnx high entropy brass alloy prepared by mechanical alloying and fast hot pressing sintering, Mater. Lett., 312, 10.1016/j.matlet.2021.131614 Li, 2016, The Hall-Petch effect as a manifestation of the general size effect, Proc. R. Soc. A-Math. Phys. Eng. Sci., 472 Dharmendra, 2019, Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing, Addit. Manuf., 30 Ma, 2019, 3D micromechanical simulation of the mechanical behavior of an in-situ Al3Ti/A356 composite, Compos. Pt. B-Eng., 176, 10.1016/j.compositesb.2019.107115 Cai, 2020, Effect of cold rolling on microstructural and mechanical properties of Mg-7Li alloy, Int. J. Mod. Phys. B, 34 S. Tian, Y.S. Liu, Q. Ma, P.G. Zhang, J. Zhou, F. Xue, Z.M. Sun, Intermetallics-induced directional growth of Sn whiskers in Sn-3.5Ag coating on Al substrate, Appl. Surf. Sci. 539 (2021). 10.1016/j.apsusc.2020.148135. Tian, 2021, Tin whiskers prefer to grow from the 001 grains in a tin coating on aluminum substrate, J. Mater. Sci. Technol., 80, 191, 10.1016/j.jmst.2021.01.002 Wu, 2015, Effect of heat treatment on microstructure evolution and erosion-corrosion behavior of a nickel-aluminum bronze alloy in chloride solution, Corros. Sci., 98, 260, 10.1016/j.corsci.2015.05.037 Szala, 2022, Effect of microstructure and hardness on cavitation erosion and dry sliding wear of HVOF deposited CoNiCrAlY, NiCoCrAlY and NiCrMoNbTa coatings, Materials., 15, 101 X. Cai, Z. Wang, X.Y. Wang, Y.X. Qiao, D.K. Xu, J. Zhou, F. Xue, Effect of quasicrystal I-phase on microstructure and mechanical properties of hot-rolled diphasic Mg-8 wt.% Li alloy, J. Mater. Eng. Perform. 34 (8) (2021) 3054–3064. doi:10.1007/s11665-021-06406-8. Han, 2012, Crystallization of liquid Cu nanodroplets on single crystal Cu substrates prefers closest-packed planes regardless of the substrate orientations, J. Cryst. Growth., 345, 34, 10.1016/j.jcrysgro.2012.02.018 Chen, 2019, Misfit strain induced phase transformation at a basal/prismatic twin boundary in deformation of magnesium, Comput. Mater. Sci., 164, 186, 10.1016/j.commatsci.2019.04.020