Adsorption materials for volatile organic compounds (VOCs) and the key factors for VOCs adsorption process: A review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Yu, 2017, Airborne measurements of isoprene and monoterpene emissions from southeastern U.S. forests, Sci. Total Environ., 595, 149, 10.1016/j.scitotenv.2017.03.262
Zheng, 2017, Quantitative assessment of industrial VOC emissions in China: historical trend, spatial distribution, uncertainties, and projection, Atmos. Environ., 150, 116, 10.1016/j.atmosenv.2016.11.023
Liu, 2019, Porous polymeric resin for adsorbing low concentration of VOCs: unveiling adsorption mechanism and effect of VOCs’ molecular properties, Sep. Purif. Technol., 228, 115755, 10.1016/j.seppur.2019.115755
Wang, 2013, Characterization and assessment of volatile organic compounds (VOCs) emissions from typical industries, Chin. Sci. Bull., 58, 724, 10.1007/s11434-012-5345-2
Hong-Li, 2017, Volatile organic compounds (VOCs) source profiles of on-road vehicle emissions in China, Sci. Total Environ., 607–608, 253, 10.1016/j.scitotenv.2017.07.001
Huang, 2014, Chlorinated volatile organic compounds (Cl-VOCs) in environment - sources, potential human health impacts, and current remediation technologies, Environ. Int., 71, 118, 10.1016/j.envint.2014.06.013
Bari, 2018, Ambient volatile organic compounds (VOCs) in Calgary, Alberta: sources and screening health risk assessment, Sci. Total Environ., 631–632, 627, 10.1016/j.scitotenv.2018.03.023
Varela-Gandia, 2013, Total oxidation of naphthalene using palladium nanoparticles supported on BETA, ZSM-5, SAPO-5 and alumina powders, Appl. Catal. B-Environ., 129, 98, 10.1016/j.apcatb.2012.08.041
Galezowska, 2016, In vitro assays as a tool for determination of VOCs toxic effect on respiratory system: a critical review, Trac-Trend. Anal. Chem., 77, 14, 10.1016/j.trac.2015.10.012
Klett, 2014, Acetaldehyde removal using an atmospheric non-thermal plasma combined with a packed bed: role of the adsorption process, J. Hazard. Mater., 279, 356, 10.1016/j.jhazmat.2014.07.014
Kamal, 2016, Catalytic oxidation of volatile organic compounds (VOCs) – A review, Atmos. Environ., 140, 117, 10.1016/j.atmosenv.2016.05.031
Xu, 2017, Influence of synoptic condition and holiday effects on VOCs and ozone production in the Yangtze River Delta region, China, Atmos. Environ., 168, 112, 10.1016/j.atmosenv.2017.08.035
Blommaerts, 2018, Ultrafast screening of commercial sorbent materials for VOC adsorption using real-time FTIR spectroscopy, Sep. Purif. Technol., 207, 284, 10.1016/j.seppur.2018.06.062
Yang, 2019, Activation pathway of C-H and C-C bonds of ethane by Pd atom with CO2 as a soft oxidant, ChemistrySelect, 4, 9608, 10.1002/slct.201902177
Liang, 2017, Reactivity-based industrial volatile organic compounds emission inventory and its implications for ozone control strategies in China, Atmos. Environ., 162, 115, 10.1016/j.atmosenv.2017.04.036
Della Pina, 2018, Polyaniline (PANI): an innovative support for sampling and removal of VOCs in air matrices, J. Hazard. Mater., 344, 308, 10.1016/j.jhazmat.2017.10.012
Mirzaei, 2016, Detection of hazardous volatile organic compounds (VOCs) by metal oxide nanostructures-based gas sensors: a review, Ceram. Int., 42, 15119, 10.1016/j.ceramint.2016.06.145
Yan, 2018, Thermal management and catalytic combustion stability characteristics of premixed methane/air in heat recirculation meso-combustors, Int. J. Energy Res., 42, 999, 10.1002/er.3887
Ozturk, 2015, VOC separation using immobilized liquid membranes impregnated with oils, Sep. Purif. Technol., 153, 1, 10.1016/j.seppur.2015.08.032
Niu, 2019, Effect of oxide additives on the hydrotalcite derived Ni catalysts for CO2 reforming of methane, Chem. Eng. J., 377, 119763, 10.1016/j.cej.2018.08.149
Lan, 2019, A review of microscopic seepage mechanism for shale gas extracted by supercritical CO2 flooding, Fuel, 238, 412, 10.1016/j.fuel.2018.10.130
Ehn, 2014, A large source of low-volatility secondary organic aerosol, Nature, 506, 476, 10.1038/nature13032
Niu, 2016, Dry (CO 2) reforming of methane over Pt catalysts studied by DFT and kinetic modeling, Appl. Surf. Sci., 376, 79, 10.1016/j.apsusc.2016.01.212
Song, 2014, Investigation of SO2 gas adsorption in metal–organic frameworks by molecular simulation, Inorg. Chem. Commun., 46, 277, 10.1016/j.inoche.2014.06.003
Abdulrasheed, 2018, Surface modification of activated carbon for adsorption of SO2 and NOX: a review of existing and emerging technologies, Renew. Sust. Energy Rev., 94, 1067, 10.1016/j.rser.2018.07.011
Yang, 2019, Abatement of various types of VOCs by adsorption/catalytic oxidation: a review, Chem. Eng. J., 370, 1128, 10.1016/j.cej.2019.03.232
Rakic, 2015, The adsorption of pharmaceutically active compounds from aqueous solutions onto activated carbons, J. Hazard. Mater., 282, 141, 10.1016/j.jhazmat.2014.04.062
Twumasi, 2012, Carbon-silica composites prepared by the precipitation method Effect of the synthesis parameters on textural characteristics and toluene dynamic adsorption, J. Porous. Mater., 19, 333, 10.1007/s10934-011-9479-4
Lillo-Rodenas, 2011, Benzene and toluene adsorption at low concentration on activated carbon fibres, Adsorption, 17, 473, 10.1007/s10450-010-9301-7
Wang, 2015, Adsorption of benzene, cyclohexane and hexane on ordered mesoporous carbon, J. Environ. Sci. (China), 30, 65, 10.1016/j.jes.2014.10.015
Mohammed, 2015, Adsorption of benzene and toluene onto KOH activated coconut shell based carbon treated with NH3, Int. Biodeter. Biodegr., 102, 245, 10.1016/j.ibiod.2015.02.012
Li, 2011, Surface modification of coconut shell based activated carbon for the improvement of hydrophobic VOC removal, J. Hazard. Mater., 192, 683, 10.1016/j.jhazmat.2011.05.069
Jahandar Lashaki, 2016, The role of beaded activated carbon's pore size distribution on heel formation during cyclic adsorption/desorption of organic vapors, J. Hazard. Mater., 315, 42, 10.1016/j.jhazmat.2016.04.071
Ramos, 2010, Adsorption of volatile organic compounds onto activated carbon cloths derived from a novel regenerated cellulosic precursor, J. Hazard. Mater., 177, 175, 10.1016/j.jhazmat.2009.12.014
Gil, 2014, VOCs removal by adsorption onto activated carbons from biocollagenic wastes of vegetable tanning, Chem. Eng. J., 245, 80, 10.1016/j.cej.2014.02.012
Lillo-Rodenas, 2007, Activated carbons prepared by pyrolysis of mixtures of carbon precursor/alkaline hydroxide, J. Anal. Appl. Pyrol., 80, 166, 10.1016/j.jaap.2007.01.014
Yi, 2009, Adsorption of VOC on modified activated carbon fiber, J Porous Mat, 16, 521, 10.1007/s10934-008-9228-5
Tsai, 2008, Adsorption characteristics of acetone, chloroform and acetonitrile on sludge-derived adsorbent, commercial granular activated carbon and activated carbon fibers, J. Hazard. Mater., 154, 1183, 10.1016/j.jhazmat.2007.11.065
Mohan, 2009, Breakthrough of toluene vapours in granular activated carbon filled packed bed reactor, J. Hazard. Mater., 168, 777, 10.1016/j.jhazmat.2009.02.079
Hsu, 2014, Adsorption of chlorinated volatile organic compounds using activated carbon made from Jatropha curcas seeds, J. Taiwan Inst. Chem. Eng., 45, 2526, 10.1016/j.jtice.2014.05.028
Carter, 2011, Gas-phase formaldehyde adsorption isotherm studies on activated carbon: correlations of adsorption capacity to surface functional group density, Environ. Sci. Technol., 45, 6498, 10.1021/es104286d
Hsiu-Mei, 2009, Adsorption characteristics of Orange II and Chrysophenine on sludge adsorbent and activated carbon fibers, J. Hazard. Mater., 161, 1384, 10.1016/j.jhazmat.2008.04.102
Romero-Anaya, 2010, Spherical activated carbons for low concentration toluene adsorption, Carbon, 48, 2625, 10.1016/j.carbon.2010.03.067
Kim, 2010, The adsorption and desorption characteristics of a binary component system of toluene and methylethylketone on activated carbon modified with phosphoric acid, Carbon, 48, 2198, 10.1016/j.carbon.2010.02.021
Zhang, 2010, Application of wave propagation theory to adsorption breakthrough studies of toluene on activated carbon fiber beds, Carbon, 48, 2317, 10.1016/j.carbon.2010.03.008
Silvestre-Albero, 2010, High saturation capacity of activated carbons prepared from mesophase pitch in the removal of volatile organic compounds, Carbon, 48, 548, 10.1016/j.carbon.2009.10.001
Haghighat, 2008, Evaluation of various activated carbons for air cleaning - Towards design of immune and sustainable buildings, Atmos. Environ., 42, 8176, 10.1016/j.atmosenv.2008.07.061
Oh, 2008, Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption, J. Anal. Appl. Pyrol., 81, 211, 10.1016/j.jaap.2007.11.006
de Yuso, 2013, Toluene and n-hexane adsorption and recovery behavior on activated carbons derived from almond shell wastes, Fuel Process. Technol., 110, 1, 10.1016/j.fuproc.2013.01.001
Silvestre-Albero, 2009, Ethanol removal using activated carbon: effect of porous structure and surface chemistry, Micropor. Mesopor. Mater., 120, 62, 10.1016/j.micromeso.2008.10.012
Izquierdo, 2013, Influence of activated carbon characteristics on toluene and hexane adsorption: application of surface response methodology, Appl. Surf. Sci., 264, 335, 10.1016/j.apsusc.2012.10.023
Kim, 2012, The effect of pore structure of zeolite on the adsorption of VOCs and their desorption properties by microwave heating, Micropor. Mesopor. Mater., 152, 78, 10.1016/j.micromeso.2011.11.051
Nigar, 2015, Removal of VOCs at trace concentration levels from humid air by Microwave Swing Adsorption, kinetics and proper sorbent selection, Sep. Purif. Technol., 151, 193, 10.1016/j.seppur.2015.07.019
Kraus, 2018, Competing adsorption of toluene and water on various zeolites, Chem. Eng. J., 351, 356, 10.1016/j.cej.2018.06.128
Zhou, 2016, Preparation of zeolitic imidazolate framework-8 /graphene oxide composites with enhanced VOCs adsorption capacity, Micropor. Mesopor. Mater., 225, 488, 10.1016/j.micromeso.2016.01.047
Dou, 2011, Adsorption performance of VOCs in ordered mesoporous silicas with different pore structures and surface chemistry, J. Hazard. Mater., 186, 1615, 10.1016/j.jhazmat.2010.12.051
Cosseron, 2013, Adsorption of volatile organic compounds in pure silica CHA, *BEA, MFI and STT-type zeolites, Micropor. Mesopor. Mater., 173, 147, 10.1016/j.micromeso.2013.02.009
Lee, 2011, Adsorption and thermal regeneration of acetone and toluene vapors in dealuminated Y-zeolite bed, Sep. Purif. Technol., 77, 312, 10.1016/j.seppur.2010.12.022
Yu, 2015, Facile preparation of hierarchically porous diatomite/MFI-type zeolite composites and their performance of benzene adsorption: The effects of NaOH etching pretreatment, J. Hazard. Mater., 285, 173, 10.1016/j.jhazmat.2014.11.034
Dou, 2010, Hydrophobic micro/mesoporous silica spheres assembled from zeolite precursors in acidic media for aromatics adsorption, Micropor. Mesopor. Mater., 133, 115, 10.1016/j.micromeso.2010.04.023
Hu, 2009, Dynamic adsorption of volatile organic compounds on organofunctionalized SBA-15 materials, Chem. Eng. J., 149, 281, 10.1016/j.cej.2008.11.003
Hung, 2009, Ordered mesoporous silica particles and Si-MCM-41 for the adsorption of acetone: a comparative study, Sep. Purif. Technol., 64, 265, 10.1016/j.seppur.2008.10.020
Jansson, 2015, Zeolite-TiO2 hybrid composites for pollutant degradation in gas phase, Appl. Catal. B-Environ., 178, 100, 10.1016/j.apcatb.2014.10.022
Wang, 2014, Functionalized hollow siliceous spheres for VOCs removal with high efficiency and stability, J. Hazard. Mater., 268, 115, 10.1016/j.jhazmat.2013.12.070
Wang, 2015, Synthesis of novel hyper-cross-linked polymers as adsorbent for removing organic pollutants from humid streams, Chem. Eng. J., 281, 34, 10.1016/j.cej.2015.06.095
Liu, 2018, Studies on toluene adsorption performance and hydrophobic property in phenyl functionalized KIT-6, Chem. Eng. J., 334, 191, 10.1016/j.cej.2017.08.091
Liu, 2009, Synthesis and application of a hydrophobic hypercrosslinked polymeric resin for removing VOCs from humid gas stream, Chin. Chem. Lett., 20, 492, 10.1016/j.cclet.2008.11.019
Zhang, 2012, Preparation and characterization of micro-mesoporous hypercrosslinked polymeric adsorbent and its application for the removal of VOCs, Chem. Eng. J., 192, 8, 10.1016/j.cej.2012.03.071
Wang, 2013, Aniline modified hypercrosslinked polystyrene resins and their adsorption equilibriums, kinetics and dynamics towards salicylic acid from aqueous solutions, Chem. Eng. J., 233, 124, 10.1016/j.cej.2013.08.039
Wang, 2014, Enhanced adsorption and desorption of VOCs vapor on novel micro-mesoporous polymeric adsorbents, J. Colloid Interface Sci., 428, 185, 10.1016/j.jcis.2014.04.055
Liu, 2009, Adsorption of trichloroethylene and benzene vapors onto hypercrosslinked polymeric resin, J. Hazard. Mater., 166, 46, 10.1016/j.jhazmat.2008.10.124
Long, 2012, Removal of benzene and methyl ethyl ketone vapor: comparison of hypercrosslinked polymeric adsorbent with activated carbon, J. Hazard. Mater., 203–204, 251, 10.1016/j.jhazmat.2011.12.010
Long, 2013, Adsorption of n-hexane vapor by macroporous and hypercrosslinked polymeric resins: Equilibrium and breakthrough analysis, Chem. Eng. J., 221, 105, 10.1016/j.cej.2013.01.083
Long, 2010, Adsorption characteristics of benzene-chlorobenzene vapor on hypercrosslinked polystyrene adsorbent and a pilot-scale application study, Chem. Eng. J., 160, 723, 10.1016/j.cej.2010.03.074
Chang, 2008, Adsorptive removal of the pesticide methomyl using hypercrosslinked polymers, J. Hazard. Mater., 155, 295, 10.1016/j.jhazmat.2007.11.057
Huang, 2012, Synthesis, characterization and adsorption properties of diethylenetriamine-modified hypercrosslinked resins for efficient removal of salicylic acid from aqueous solution, J. Hazard. Mater., 217–218, 406, 10.1016/j.jhazmat.2012.03.053
Long, 2011, Characterization of hydrophobic hypercrosslinked polymer as an adsorbent for removal of chlorinated volatile organic compounds, Environ. Sci. Technol., 45, 4506, 10.1021/es104250j
Ma, 2014, Preparation of a novel magnetic microporous adsorbent and its adsorption behavior of p-nitrophenol and chlorotetracycline, J. Hazard. Mater., 266, 84, 10.1016/j.jhazmat.2013.12.015
Wu, 2012, Adsorption characteristics of pentane, hexane, and heptane: comparison of hydrophobic hypercrosslinked polymeric adsorbent with activated carbon, J. Chem. Eng. Data, 57, 3426, 10.1021/je300550x
Kuang, 2017, Phenol-modified hyper-cross-linked resins with almost all micro/mesopores and their adsorption to aniline, J. Colloid Interf. Sci., 487, 31, 10.1016/j.jcis.2016.09.076
Wang, 2013, Adsorption properties of benzene and water vapor on hyper-cross-linked polymers, RSC Adv., 3, 20523, 10.1039/c3ra41450g
Jia, 2014, Adsorption equilibrium and dynamics of gasoline vapors onto polymeric adsorbents, Environ. Sci. Pollut. Res. Int., 21, 3756, 10.1007/s11356-013-2328-z
Wu, 2016, Prediction of the breakthrough curves of VOC isothermal adsorption on hypercrosslinked polymeric adsorbents in a fixed bed, RSC Adv., 6, 28986, 10.1039/C6RA01310D
Sun, 2014, Heterogeneity of adsorption sites and adsorption kinetics of n-hexane on metal-organic framework MIL-101(Cr), Chin. J. Chem. Eng., 22, 962, 10.1016/j.cjche.2014.06.031
Saini, 2017, Development of metal organic fromwork-199 immobilized zeolite foam for adsorption of common indoor VOCs, J. Environ. Sci. (China), 55, 321, 10.1016/j.jes.2016.09.017
Zhao, 2015, Competitive adsorption and selectivity of benzene and water vapor on the microporous metal organic frameworks (HKUST-1), Chem. Eng. J., 259, 79, 10.1016/j.cej.2014.08.012
Shafiei, 2018, Synthesis and adsorption performance of a modified micro-mesoporous MIL-101(Cr) for VOCs removal at ambient conditions, Chem. Eng. J., 341, 164, 10.1016/j.cej.2018.02.027
Yang, 2011, Adsorption of volatile organic compounds by metal-organic frameworks MIL-101: influence of molecular size and shape, J. Hazard. Mater., 195, 124, 10.1016/j.jhazmat.2011.08.020
Yang, 2013, Adsorption of volatile organic compounds by metal-organic frameworks MOF-177, J. Environ. Chem. Eng., 1, 713, 10.1016/j.jece.2013.07.005
Vellingiri, 2017, Metal-organic frameworks for the adsorption of gaseous toluene under ambient temperature and pressure, Chem. Eng. J., 307, 1116, 10.1016/j.cej.2016.09.012
Zhou, 2017, Modulated synthesis of zirconium metal-organic framework UiO-66 with enhanced dichloromethane adsorption capacity, Mater. Lett., 197, 167, 10.1016/j.matlet.2017.03.162
Bahri, 2017, A comparative study on metal organic frameworks for indoor environment application: Adsorption evaluation, Chem. Eng. J., 313, 711, 10.1016/j.cej.2016.10.004
Ma, 2011, Adsorption of volatile organic compounds in porous metal-organic frameworks functionalized by polyoxometalates, J. Solid State Chem., 184, 3034, 10.1016/j.jssc.2011.09.002
Zhao, 2011, Adsorption equilibrium and kinetics of p-xylene on chromium-based metal organic framework MIL-101, Chem. Eng. J., 173, 150, 10.1016/j.cej.2011.07.051
Zhao, 2011, Adsorption and diffusion of benzene on chromium-based metal organic framework MIL-101 synthesized by microwave irradiation, Ind. Eng. Chem. Res., 50, 2254, 10.1021/ie101414n
Xu, 2013, Effect of textural properties on the adsorption and desorption of toluene on the metal-organic frameworks HKUST-1 and MIL-101, Adsorpt. Sci. Technol., 31, 325, 10.1260/0263-6174.31.4.325
Qin, 2014, Metal-organic framework MIL-101 doped with palladium for toluene adsorption and hydrogen storage, RSC Adv., 4, 2414, 10.1039/C3RA45983G
Martinez, 2006, Preparation and characteristics of activated carbon from olive stones and walnut shells, Ind. Crop Prod., 23, 23, 10.1016/j.indcrop.2005.03.001
Singh, 2008, Studies on the removal of Pb(II) from wastewater by activated carbon developed from Tamarind wood activated with sulphuric acid, J. Hazard. Mater., 153, 221, 10.1016/j.jhazmat.2007.08.043
Wickramaratne, 2013, Importance of small micropores in CO2 capture by phenolic resin-based activated carbon spheres, J. Mater. Chem. A, 1, 112, 10.1039/C2TA00388K
Lorenc-Grabowska, 2007, Adsorption characteristics of Congo Red on coal-based mesoporous activated carbon, Dyes Pigments, 74, 34, 10.1016/j.dyepig.2006.01.027
Barton, 2018, Ammoxidation of polyethylene: a new route to carbon, Carbon, 130, 288, 10.1016/j.carbon.2018.01.031
Petrova, 2011, Activated carbon from coal tar pitch and furfural for the removal of p-nitrophenol and m-aminophenol, Chem. Eng. J., 172, 102, 10.1016/j.cej.2011.05.075
Zhang, 2017, Biochar for volatile organic compound (VOC) removal: Sorption performance and governing mechanisms, Bioresour. Technol., 245, 606, 10.1016/j.biortech.2017.09.025
Chen, 2008, Transitional adsorption and partition of nonpolar and polar aromatic contaminants by biochars of pine needles with different pyrolytic temperatures, Environ. Sci. Technol., 42, 5137, 10.1021/es8002684
Keiluweit, 2010, Dynamic molecular structure of plant biomass-derived black carbon (biochar), Environ. Sci. Technol., 44, 1247, 10.1021/es9031419
Nowicki, 2015, Comparison of physicochemical and sorption properties of activated carbons prepared by physical and chemical activation of cherry stones, Powder Technol., 269, 312, 10.1016/j.powtec.2014.09.023
Bouchelta, 2008, Preparation and characterization of activated carbon from date stones by physical activation with steam, J. Anal. Appl. Pyrol., 82, 70, 10.1016/j.jaap.2007.12.009
Carrott, 2008, Delgado, Reactivity and porosity development during pyrolysis and physical activation in CO2 or steam of kraft and hydrolytic lignins, J. Anal. Appl. Pyrol., 82, 264, 10.1016/j.jaap.2008.04.004
Prahas, 2008, Activated carbon from jackfruit peel waste by H3PO4 chemical activation: Pore structure and surface chemistry characterization, Chem. Eng. J., 140, 32, 10.1016/j.cej.2007.08.032
Cardoso, 2008, Activated carbon derived from cork powder waste by KOH activation: Preparation, characterization, and VOCs adsorption, Ind. Eng. Chem. Res., 47, 5841, 10.1021/ie800338s
Nakagawa, 2007, Modification of the porous structure along the preparation of activated carbon monoliths with H3PO4 and ZnCl2, Micropor. Mesopor. Mater., 103, 29, 10.1016/j.micromeso.2007.01.029
Liu, 2014, High-pressure hydrogen storage and optimizing fabrication of corncob-derived activated carbon, Micropor. Mesopor. Mater., 194, 60, 10.1016/j.micromeso.2014.04.005
Zuo, 2009, Significance of the carbonization of volatile pyrolytic products on the properties of activated carbons from phosphoric acid activation of lignocellulosic material, Fuel Process. Technol., 90, 994, 10.1016/j.fuproc.2009.04.003
Ramirez-Montoya, 2015, Correlation between mesopore volume of carbon supports and the immobilization of laccase from Trametes versicolor for the decolorization of Acid Orange 7, J. Environ. Manage., 162, 206, 10.1016/j.jenvman.2015.07.035
Jain, 2015, Production of high surface area mesoporous activated carbons from waste biomass using hydrogen peroxide-mediated hydrothermal treatment for adsorption applications, Chem. Eng. J., 273, 622, 10.1016/j.cej.2015.03.111
Guo, 2017, Tremella derived ultrahigh specific surface area activated carbon for high performance supercapacitor, Mater. Chem. Phys., 201, 399, 10.1016/j.matchemphys.2017.08.054
Goto, 2015, Effect of polarity of activated carbon surface, solvent and adsorbate on adsorption of aromatic compounds from liquid phase, Chem. Pharm. Bull. (Tokyo), 63, 726, 10.1248/cpb.c15-00039
Lu, 2015, Electrocatalytic oxygen evolution at surface-oxidized multiwall carbon nanotubes, J. Am. Chem. Soc., 137, 2901, 10.1021/ja509879r
Gokce, 2014, Nitric acid modification of activated carbon produced from waste tea and adsorption of methylene blue and phenol, Appl. Surf. Sci., 313, 352, 10.1016/j.apsusc.2014.05.214
Sun, 2017, Regeneration of activated carbon saturated with chloramphenicol by microwave and ultraviolet irradiation, Chem. Eng. J., 320, 264, 10.1016/j.cej.2017.03.007
Park, 2017, Assembly of PDMS/SiO 2 -PTFE and activated carbon fibre as a liquid water–resistant gas sorbent structure, Chem. Eng. J., 325, 433, 10.1016/j.cej.2017.05.088
Song, 2017, The preparation and performance of lignin-based activated carbon fiber adsorbents for treating gaseous streams, Front. Chem. Sci. Eng., 11, 328, 10.1007/s11705-017-1646-y
Li, 2016, Effects of ultraviolet modification on physicochemical property and adsorption performance of biochar, Nanosci. Nanotech. Lett., 8, 978, 10.1166/nnl.2016.2184
Liu, 2016, Enhanced adsorption of benzene vapor on granular activated carbon under humid conditions due to shifts in hydrophobicity and total micropore volume, J. Hazard. Mater., 318, 425, 10.1016/j.jhazmat.2016.07.026
Azimi, 2017, Effect of embedded activated carbon nanoparticles on the performance of polydimethylsiloxane (PDMS) membrane for pervaporation separation of butanol, J. Chem. Technol. Biotechnol., 92, 2901, 10.1002/jctb.5306
Tidahy, 2007, Influence of the exchanged cation in Pd/BEA and Pd/FAU zeolites for catalytic oxidation of VOCs, Appl. Catal. B-Environ., 70, 377, 10.1016/j.apcatb.2006.02.027
Yousef, 2011, Adsorption characteristics of natural zeolites as solid adsorbents for phenol removal from aqueous solutions: kinetics, mechanism, and thermodynamics studies, Chem. Eng. J., 171, 1143, 10.1016/j.cej.2011.05.012
Chen, 2015, Superior performance in catalytic combustion of toluene over mesoporous ZSM-5 zeolite supported platinum catalyst, Catal. Today, 258, 190, 10.1016/j.cattod.2015.02.006
Yan, 2017, Catalytic combustion of isopropanol over Co-Mn mixed oxides modified ZSM-5 zeolite membrane catalysts coated on stainless steel fibers, Sep. Purif. Technol., 175, 213, 10.1016/j.seppur.2016.11.022
Ciesla, 1999, Ordered mesoporous materials, Micropor. Mesopor. Mater., 27, 131, 10.1016/S1387-1811(98)00249-2
Tang, 2004, The anion sequence in the phase transformation of mesostructures templated by non-ionic block copolymers, Chem. Commun. (Camb.), 19, 2240, 10.1039/b408100e
Bhatia, 2009, Adsorption of butyl acetate in air over silver-loaded Y and ZSM-5 zeolites: experimental and modelling studies, J. Hazard. Mater., 163, 73, 10.1016/j.jhazmat.2008.06.055
Güvenç, 2012, Adsorption of methyl tertiary butyl ether and trichloroethylene in MFI-type zeolites, J. Phys. Chem. C, 116, 21836, 10.1021/jp3067052
Yazaydin, 2006, Molecular simulation of the adsorption of MTBE in silicalite, mordenite, and zeolite beta, J. Phys. Chem. B, 110, 14458, 10.1021/jp061986n
Brodu, 2015, Fixed-bed adsorption of toluene on high silica zeolites: experiments and mathematical modelling using LDF approximation and a multisite model, Environ. Technol., 36, 1807, 10.1080/09593330.2015.1012181
Cosseron, 2013, Adsorption of volatile organic compounds in pure silica CHA, ∗BEA, MFI and STT-type zeolites, Micropor. Mesopor. Mater., 173, 147, 10.1016/j.micromeso.2013.02.009
Serrano, 2004, Adsorption and hydrophobic properties of mesostructured MCM-41 and SBA-15 materials for volatile organic compound removal, Ind. Eng. Chem. Res., 43, 7010, 10.1021/ie040108d
Guillemot, 2007, Volatile organic compounds (VOCs) removal over dual functional adsorbent/catalyst system, Appl. Catal. B-Environ., 75, 249, 10.1016/j.apcatb.2007.04.020
Long, 2012, Adsorption characteristics of water vapor on the hypercrosslinked polymeric adsorbent, Chem. Eng. J., 180, 106, 10.1016/j.cej.2011.11.019
Shi, 2018, Binary adsorption equilibrium and breakthrough of toluene and cyclohexane on macroporous and hypercrosslinked polymeric resins, Micropor. Mesopor. Mater., 271, 73, 10.1016/j.micromeso.2018.05.034
Águeda, 2011, Effect of channel geometry, degree of activation, relative humidity and temperature on the performance of binderless activated carbon monoliths in the removal of dichloromethane from air, Sep. Purif. Technol., 78, 154, 10.1016/j.seppur.2011.01.036
Iliyas, 2007, Control of hydrocarbon cold-start emissions: a search for potential adsorbents, Micropor. Mesopor. Mater., 102, 171, 10.1016/j.micromeso.2006.12.038
Zhou, 2018, Adsorption/desorption of toluene on a hypercrosslinked polymeric resin in a highly humid gas stream, Chin. J. Chem. Eng.
Nahm, 2012, Thermal and chemical regeneration of spent activated carbon and its adsorption property for toluene, Chem. Eng. J., 210, 500, 10.1016/j.cej.2012.09.023
Mihaly, 2016, Ion-directed synthesis of indium-derived 2,5-thiophenedicarboxylate metal-organic frameworks: tuning framework dimensionality, Cryst. Growth Des., 16, 1550, 10.1021/acs.cgd.5b01680
Yin, 2015, The concept of mixed organic ligands in metal-organic frameworks: design, tuning and functions, Dalton Trans., 44, 5258, 10.1039/C4DT04030A
Mishra, 2014, Adsorption characteristics of metal-organic frameworks containing coordinatively unsaturated metal sites: effect of metal cations and adsorbate properties, J. Phys. Chem. C, 118, 6847, 10.1021/jp412622b
Yaghi, 1995, Selective binding and removal of guests in a microporous metal–organic framework, Nature, 378, 703, 10.1038/378703a0
Furukawa, 2015, “Heterogeneity within order” in metal-organic frameworks, Angew. Chem. Int. Ed. Engl., 54, 3417, 10.1002/anie.201410252
Eddaoudi, 2002, Systematic design of pore size and functionality in isoreticular MOFs and their application in methane storage, Science, 295, 469, 10.1126/science.1067208
Saha, 2009, Hydrogen adsorption equilibrium and kinetics in metal-organic framework (MOF-5) synthesized with DEF approach, Sep. Purif. Technol., 64, 280, 10.1016/j.seppur.2008.10.022
Ferey, 2005, A chromium terephthalate-based solid with unusually large pore volumes and surface area, Science, 309, 2040, 10.1126/science.1116275
Jhung, 2007, Microwave synthesis of chromium terephthalate MIL-101 and its benzene sorption ability, Adv. Mater., 19, 121, 10.1002/adma.200601604
Huang, 2011, Probing the adsorption characteristic of metal-organic framework MIL-101 for volatile organic compounds by quartz crystal microbalance, Environ. Sci. Technol., 45, 4490, 10.1021/es200256q
Cho, 2006, A metal-organic framework material that functions as an enantioselective catalyst for olefin epoxidation, Chem. Commun. (Camb.), 24, 2563, 10.1039/B600408C
Khan, 2013, Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): a review, J. Hazard. Mater., 244–245, 444, 10.1016/j.jhazmat.2012.11.011
Ahmad, 2014, Biochar as a sorbent for contaminant management in soil and water: a review, Chemosphere, 99, 19, 10.1016/j.chemosphere.2013.10.071
Gao, 2010, Preparation and hydrogen storage of activated rayon-based carbon fibers with high specific surface area, J. Phys. Chem. Solids, 71, 444, 10.1016/j.jpcs.2009.11.017
Sun, 2014, Effects of feedstock type, production method, and pyrolysis temperature on biochar and hydrochar properties, Chem. Eng. J., 240, 574, 10.1016/j.cej.2013.10.081
Thommes, 2011, Assessing surface chemistry and pore structure of active carbons by a combination of physisorption (H2O, Ar, N2, CO2), XPS and TPD-MS, Adsorption, 17, 653, 10.1007/s10450-011-9360-4
Wei, 2012, Granular bamboo-derived activated carbon for high CO(2) adsorption: the dominant role of narrow micropores, ChemSusChem, 5, 2354, 10.1002/cssc.201200570
Hong, 2013, MCM-41 from spent glasses for volatile organic compounds treatment, Chem. Eng. J., 215–216, 472, 10.1016/j.cej.2012.09.128
Liu, 2016, Performance of mesoporous silicas (MCM-41 and SBA-15) and carbon (CMK-3) in the removal of gas-phase naphthalene: adsorption capacity, rate and regenerability, RSC Adv., 6, 21193, 10.1039/C5RA27289K
Chiang, 2001, Effects of pore structure and temperature on VOC adsorption on activated carbon, Carbon, 39, 523, 10.1016/S0008-6223(00)00161-5
Crespo, 2006, Adsorption of Organic Vapors on Single-Walled Carbon Nanotubes, Ind. Eng. Chem. Res., 45, 5524, 10.1021/ie051106b
Lillo-Rodenas, 2005, Behaviour of activated carbons with different pore size distributions and surface oxygen groups for benzene and toluene adsorption at low concentrations, Carbon, 43, 1758, 10.1016/j.carbon.2005.02.023
Gu, 2012, Metal-organic frameworks for analytical chemistry: from sample collection to chromatographic separation, Acc. Chem. Res., 45, 734, 10.1021/ar2002599
Kosuge, 2007, Effect of pore structure in mesoporous silicas on VOC dynamic adsorption/desorption performance, Langmuir, 23, 3095, 10.1021/la062616t
Qian, 2015, Removal of VOCs by activated carbon microspheres derived from polymer: a comparative study, Adsorption, 21, 333, 10.1007/s10450-015-9673-9
Yang, 2014, Biochar from Alternanthera philoxeroides could remove Pb(II) efficiently, Bioresour. Technol., 171, 227, 10.1016/j.biortech.2014.08.015
Zhao, 2018, An experimental and theoretical study of the adsorption removal of toluene and chlorobenzene on coconut shell derived carbon, Chemosphere, 206, 285, 10.1016/j.chemosphere.2018.04.126
Tefera, 2013, Two-dimensional modeling of volatile organic compounds adsorption onto beaded activated carbon, Environ. Sci. Technol., 47, 11700, 10.1021/es402369u
Kim, 2006, Adsorption-desorption characteristics of VOCs over impregnated activated carbons, Catal. Today, 111, 223, 10.1016/j.cattod.2005.10.030
Tangsathitkulchai, 2009, Surface modification and adsorption of eucalyptus wood-based activated carbons: Effects of oxidation treatment, carbon porous structure and activation method, Kor. J. Chem. Eng., 26, 1341, 10.1007/s11814-009-0197-4
Lu, 2007, Simultaneous removal of VOC and NO by activated carbon impregnated with transition metal catalysts in combustion flue gas, Fuel Process. Technol., 88, 557, 10.1016/j.fuproc.2007.01.004
Zhang, 2019, Chemically activated hydrochar as an effective adsorbent for volatile organic compounds (VOCs), Chemosphere, 218, 680, 10.1016/j.chemosphere.2018.11.144
Zhang, 2019, The preparation of defective UiO-66 metal organic framework using MOF-5 as structural modifier with high sorption capacity for gaseous toluene, J. Environ. Chem. Eng., 7, 103405, 10.1016/j.jece.2019.103405