Additive manufacturing of polymeric scaffolds for biomimetic cell membrane engineering

Materials and Design - Tập 201 - Trang 109486 - 2021
David Sabaté Rovira1, Hanne Mørck Nielsen2, Rafael Taboryski1, Ada-Ioana Bunea1
1National Centre for Nano Fabrication and Characterization (DTU Nanolab), Technical University of Denmark, Ørsted Plads 347, 2800 Kgs. Lyngby, Denmark
2Center for Biopharmaceuticals and Biobarriers in Drug Delivery, Department of Pharmacy, Faculty of Health and Medical Sciences, University of Copenhagen, Universitetsparken 2, 2100 Copenhagen Ø, Denmark

Tài liệu tham khảo

Gebhardt, 2011 Lei, 2019, Electrohydrodynamic 3D printing of layer-specifically oriented, multiscale conductive scaffolds for cardiac tissue engineering, Nanoscale., 11, 15195, 10.1039/C9NR04989D Koffler, 2019, Biomimetic 3D-printed scaffolds for spinal cord injury repair, Nat. Med., 25, 263, 10.1038/s41591-018-0296-z Do, 2015, 3D printing of scaffolds for tissue regeneration applications, Adv. Healthc. Mater., 4, 1742, 10.1002/adhm.201500168 An, 2015, Design and 3D printing of scaffolds and tissues, Engineering, 1, 261, 10.15302/J-ENG-2015061 Creff, 2019, Fabrication of 3D scaffolds reproducing intestinal epithelium topography by high-resolution 3D stereolithography, Biomaterials., 221, 10.1016/j.biomaterials.2019.119404 Arrabito, 2019, Printing life-inspired subcellular scale compartments with autonomous molecularly crowded confinement, Adv. Biosyst., 3, 1900023, 10.1002/adbi.201900023 Arrabito, 2020, Artificial biosystems by printing biology, Small., 16, 1907691, 10.1002/smll.201907691 Carve, 2018, 3D-printed chips: compatibility of additive manufacturing photopolymeric substrata with biological applications, Micromachines., 9, 91, 10.3390/mi9020091 Arif, 2018, Performance of biocompatible PEEK processed by fused deposition additive manufacturing, Mater. Des., 146, 249, 10.1016/j.matdes.2018.03.015 Bose, 2018, Additive manufacturing of biomaterials, Prog. Mater. Sci., 93, 45, 10.1016/j.pmatsci.2017.08.003 Touri, 2019, Additive manufacturing of biomaterials − the evolution of rapid prototyping, Adv. Eng. Mater., 21, 1800511, 10.1002/adem.201800511 Bunea, 2019, Optimization of 3D-printed microstructures for investigating the properties of the mucus biobarrier, Micro Nano. Eng., 2, 41, 10.1016/j.mne.2018.12.004 Jaidev, 2019, Surface functionalization of 3D printed polymer scaffolds to augment stem cell response, Mater. Des., 161, 44, 10.1016/j.matdes.2018.11.018 Lin, 2019, 3D printing of mechanically stable calcium-free alginate-based scaffolds with tunable surface charge to enable cell adhesion and facile biofunctionalization, Adv. Funct. Mater., 29, 1808439, 10.1002/adfm.201808439 Zhang, 2017, Stereolithographic hydrogel printing of 3D culture chips with biofunctionalized complex 3D perfusion networks, Lab Chip, 17, 4273, 10.1039/C7LC00926G Davim, 2019 Beg, 2020, 3D printing for drug delivery and biomedical applications, Drug Discov. Today, 25, 1668, 10.1016/j.drudis.2020.07.007 Ge, 2020, Projection micro stereolithography based 3D printing and its applications, Int. J. Extrem. Manuf., 2, 22004, 10.1088/2631-7990/ab8d9a Nguyen, 2017, Two-photon polymerization for biological applications, Mater. Today, 20, 314, 10.1016/j.mattod.2017.06.004 Weiss, 2009, Two-photon polymerization for microfabrication of three-dimensional scaffolds for tissue engineering application, Eng. Life Sci., 9, 384, 10.1002/elsc.200900002 Song, 2020, From simple to architecturally complex hydrogel scaffolds for cell and tissue engineering applications: opportunities presented by two-photon polymerization, Adv. Healthc. Mater., 9, 1901217, 10.1002/adhm.201901217 Wang, 2019, Biomaterial-based microstructures fabricated by two-photon polymerization microfabrication technology, RSC Adv., 9, 34472, 10.1039/C9RA05645A Larramendy, 2019, 3D arrays of microcages by two-photon lithography for spatial organization of living cells, Lab Chip, 19, 875, 10.1039/C8LC01240G Hauptmann, 2019, Biomimetic designer scaffolds made of D,L-lactide-caprolactone polymers by 2-photon polymerization, Tissue Eng. Part B Rev., 25, 167, 10.1089/ten.teb.2018.0284 Bruen, 2020, 3D printed sugar-sensing hydrogels, Macromol. Rapid Commun., 41, 1900610, 10.1002/marc.201900610 Martella, 2020, Photonic artificial muscles: from micro robots to tissue engineering, Faraday Discuss., 10.1039/D0FD00032A Tudor, 2018, Fabrication of soft, stimulus-responsive structures with sub-micron resolution via two-photon polymerization of poly(ionic liquid)s, Mater. Today, 21, 807, 10.1016/j.mattod.2018.07.017 Del Pozo, 2020, Direct laser writing of four-dimensional structural color microactuators using a photonic photoresist, ACS Nano, 14, 9832, 10.1021/acsnano.0c02481 Nocentini, 2019, 3D printed photoresponsive materials for photonics, Adv. Opt. Mater., 7, 1900156, 10.1002/adom.201900156 Colautti, 2020, A 3D polymeric platform for photonic quantum technologies, Adv. Quant. Technol., 3, 2000004, 10.1002/qute.202000004 Mayer, 2019, Multimaterial 3D laser microprinting using an integrated microfluidic system, Sci. Adv., 5, 10.1126/sciadv.aau9160 Selimis, 2015, Direct laser writing: principles and materials for scaffold 3D printing, Microelectron. Eng., 132, 83, 10.1016/j.mee.2014.10.001 Studart, 2016, Additive manufacturing of biologically-inspired materials, Chem. Soc. Rev., 45, 359, 10.1039/C5CS00836K Yang, 2018, Recent progress in biomimetic additive manufacturing technology: From materials to functional structures, Adv. Mater., 30, 10.1002/adma.201706539 du Plessis, 2019, Beautiful and functional: a review of biomimetic design in additive manufacturing, Addit. Manuf., 27, 408 Abid, 2017, Angle-multiplexed optical printing of biomimetic hierarchical 3D textures, Laser Photonics Rev., 11, 1600187, 10.1002/lpor.201600187 Carlotti, 2019, Functional materials for two-photon polymerization in microfabrication, Small., 15, 1902687, 10.1002/smll.201902687 Serien, 2017, Multi-component microscaffold with 3D spatially defined proteinaceous environment, ACS Biomater. Sci. Eng., 3, 487, 10.1021/acsbiomaterials.6b00695 Foged, 2008, Cell-penetrating peptides for drug delivery across membrane barriers, Expert Opin. Drug Deliv., 5, 105, 10.1517/17425247.5.1.105 Shan, 2011, How does a drug molecule find its target binding site?, J. Am. Chem. Soc., 133, 9181, 10.1021/ja202726y Bunea, 2020, Membrane interactions in drug delivery: model cell membranes and orthogonal techniques, Adv. Colloid Interf. Sci., 281, 102177, 10.1016/j.cis.2020.102177 Chan, 2007, Model membrane systems and their applications, Curr. Opin. Chem. Biol., 11, 581, 10.1016/j.cbpa.2007.09.020 Pomorski, 2014, Model cell membranes: discerning lipid and protein contributions in shaping the cell, Adv. Colloid Interf. Sci., 205, 207, 10.1016/j.cis.2013.10.028 Papo, 2003, Can we predict biological activity of antimicrobial peptides from their interactions with model phospholipid membranes?, Peptides., 24, 1693, 10.1016/j.peptides.2003.09.013 Mouritsen, 2011, Lipids, curvature, and nano-medicine, Eur. J. Lipid Sci. Technol., 113, 1174, 10.1002/ejlt.201100050 Iversen, 2015, Membrane curvature bends the laws of physics and chemistry, Nat. Chem. Biol., 11, 822, 10.1038/nchembio.1941 Aimon, 2014, Membrane shape modulates transmembrane protein distribution, Dev. Cell, 28, 212, 10.1016/j.devcel.2013.12.012 Larsen, 2020, How membrane geometry regulates protein sorting independently of mean curvature, ACS Cent. Sci., 10.1021/acscentsci.0c00419 Leggio, 2020, Mastering the tools: natural versus artificial vesicles in nanomedicine, Adv. Healthc. Mater., 9, 2000731, 10.1002/adhm.202000731 Zhang, 2006, Nanoparticle-assisted surface immobilization of phospholipid liposomes, J. Am. Chem. Soc., 128, 9026, 10.1021/ja062620r Bangham, 1965, Diffusion of univalent ions across the lamellae of swollen phospholipids, J. Mol. Biol., 13, 238, 10.1016/S0022-2836(65)80093-6 Mui, 2003, Extrusion technique to generate liposomes of defined size, Methods Enzymol., 367, 3, 10.1016/S0076-6879(03)67001-1 Feidenhans’l, 2015, Comparison of optical methods for surface roughness characterization, Meas. Sci. Technol., 26, 10.1088/0957-0233/26/8/085208 Wan, 2018, Lipid shell-enveloped polymeric nanoparticles with high integrity of lipid shells improve mucus penetration and interaction with cystic fibrosis-related bacterial biofilms, ACS Appl. Mater. Interfaces, 10, 10678, 10.1021/acsami.7b19762 Collins, 2007, ImageJ for microscopy, Biotechniques., 43, S25, 10.2144/000112517 Turgeon, 2005 Feher, 2017 Brown, 2010, Molecular model of the microvillar cytoskeleton and organization of the brush border, PLoS One, 5, 10.1371/journal.pone.0009406 Saha, 2019, Scalable submicrometer additive manufacturing, Science (80), 366 Oakdale, 2016, Post-print UV curing method for improving the mechanical properties of prototypes derived from two-photon lithography, Opt. Express, 24, 27077, 10.1364/OE.24.027077 Jiang, 2014, Two-photon polymerization: investigation of chemical and mechanical properties of resins using Raman microspectroscopy, Opt. Lett., 39, 3034, 10.1364/OL.39.003034 Gernhardt, 2019, Tailoring the mechanical properties of 3D microstructures using visible light post-manufacturing, Adv. Mater., 31, 1901269, 10.1002/adma.201901269 Bauer, 2020, Thermal post-curing as an efficient strategy to eliminate process parameter sensitivity in the mechanical properties of two-photon polymerized materials, Opt. Express, 28, 20362, 10.1364/OE.395986 Zieger Ford, 2018, Measuring cytoplasmic stiffness of fibroblasts as a function of location and substrate rigidity using atomic force microscopy, ACS Biomater. Sci. Eng., 4, 3974, 10.1021/acsbiomaterials.8b01019 Torgersen, 2013, Hydrogels for two-photon polymerization: a toolbox for mimicking the extracellular matrix, Adv. Funct. Mater., 23, 4542, 10.1002/adfm.201203880 Nishiguchi, 2020, 4D printing of a light-driven soft actuator with programmed printing density, ACS Appl. Mater. Interfaces, 12, 12176, 10.1021/acsami.0c02781 Ciuciu, 2014, Two-photon polymerization of hydrogels-versatile solutions to fabricate well-defined 3D structures, RSC Adv., 4, 45504, 10.1039/C4RA06892K Chidambaram, 2017, Selective surface smoothening of polymer microlenses by depth confined softening, Adv. Mater. Technol., 2, 1700018, 10.1002/admt.201700018 Seniutinas, 2018, Beyond 100 nm resolution in 3D laser lithography — post processing solutions, Microelectron. Eng., 191, 25, 10.1016/j.mee.2018.01.018 Bougdid, 2020, Voxels optimization in 3D laser nanoprinting, Sci. Rep., 10, 10409, 10.1038/s41598-020-67184-2 Delaney, 2020, Direct laser writing to generate molds for polymer nanopillar replication, ACS Appl. Polym. Mater., 2, 3632, 10.1021/acsapm.0c00626 Choi, 2015, Influence of pH and surface chemistry on poly(L-lysine) adsorption onto solid supports investigated by quartz crystal microbalance with dissipation monitoring, J. Phys. Chem. B, 119, 10.1021/acs.jpcb.5b01553 Puce, 2019, 3D-microfabrication by two-photon polymerization of an integrated sacrificial stencil mask, Micro Nano. Eng., 2, 70, 10.1016/j.mne.2019.01.004 Regan, 2019, Lipid bilayer thickness measured by quantitative DIC reveals phase transitions and effects of substrate hydrophilicity, Langmuir., 35, 13805, 10.1021/acs.langmuir.9b02538 Heath, 2016, Layer-by-layer assembly of supported lipid bilayer poly-l-lysine multilayers, Biomacromolecules., 17, 324, 10.1021/acs.biomac.5b01434