Additive manufacturing of metals

Emmelmann, 2013, Laser additive manufacturing of metals, p143

Carroll, 2015, Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing, Acta Mater., 87, 309, 10.1016/j.actamat.2014.12.054

Brandl, 2011, Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire, Mater. Des., 32, 4665, 10.1016/j.matdes.2011.06.062

Kranz, 2015, Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4, J. Laser Appl., 27, S14001, 10.2351/1.4885235

J.J. Beaman and C.R. Deckard: Selective laser sintering with assisted powder handling, US patent no. 4938816, 1990.

Rännar, 2007, Efficient cooling with tool inserts manufactured by electron beam melting, Rapid Prototyp. J., 13, 128, 10.1108/13552540710750870

Kruth, 2005, Rapid manufacturing of dental prostheses by means of selective laser sintering/melting, Proc AFPR, S4

Murr, 2012, Metal fabrication by additive manufacturing using laser and electron beam melting technologies, J. Mater. Sci. Technol., 28, 1, 10.1016/S1005-0302(12)60016-4

Appleyard, 2015, Powering up on powder technology, Metal. Powder Rep., 70, 285, 10.1016/j.mprp.2015.08.075

Gebhardt, 2000, 76

Kruth, 2005, Binding mechanisms in selective laser sintering and selective laser melting, Rapid Prototyp. J., 11, 26, 10.1108/13552540510573365

SLM Solutions GmbH, www.slm-solutions.com.

EOS Electro Optical Systems GmbH, www.eos.info.

Concept Laser GmbH, www.concept-laser.com.

Trumpf GmbH & Co. KG, www.trumpf.com.

DM3D Technology, LLC, www.pomgroup.com.

Sandia National Laboratories, www.sandia.gov.

Yan, 2015

Brecher, 2011, 170

van der Schueren, 1995, Powder deposition in selective metal powder sintering, Rapid Prototyp. J., 1, 23, 10.1108/13552549510094241

Realizer GmbH, www.realizer.com.

Panwisawas, 2015, On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting, Scr. Mater., 105, 14, 10.1016/j.scriptamat.2015.04.016

Chlebus, 2011, Microstructure and mechanical behaviour of Ti-6Al-7Nb alloy produced by selective laser melting, Mater. Charact., 62, 488, 10.1016/j.matchar.2011.03.006

Poprawe, 2005, 229

Thijs, 2010, A study of the microstructural evolution during selective laser melting of Ti-6Al-4V, Acta Mater., 58, 3303, 10.1016/j.actamat.2010.02.004

Vilaro, 2011, As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall. Mater. Trans. A, 42, 3190, 10.1007/s11661-011-0731-y

Kempen, 2013, Lowering thermal gradients in selective laser melting by pre-heating the baseplate

Attar, 2014, Manufacture by selective laser melting and mechanical behavior of commercially pure titanium, Mater. Sci. Eng. A, 593, 170, 10.1016/j.msea.2013.11.038

Ferrar, 2012, Gas flow effects on selective laser melting (SLM) manufacturing performance, J. Mater. Process. Technol., 212, 355, 10.1016/j.jmatprotec.2011.09.020

Murr, 2010, Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting, Acta Mater., 58, 1887, 10.1016/j.actamat.2009.11.032

Arcam EBM S12, Technical Documentation, Arcam AB, Mölndal.

Gong, 2014, Review on powder-based electron beam additive manufacturing technology, Manuf. Rev., 1, 2

Al-Bermani, 2010, The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V, Metall. Mater. Trans. A, 41A, 3422, 10.1007/s11661-010-0397-x

Lutzmann, 2010

Tan, 2015, Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting, Acta Mater., 97, 1, 10.1016/j.actamat.2015.06.036

Antonysamy, 2013, Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting, Mater. Charact., 84, 153, 10.1016/j.matchar.2013.07.012

Ramirez, 2011, Novel precipitate–microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting, Acta Mater., 59, 4088, 10.1016/j.actamat.2011.03.033

Frazier, 2014, Metal additive manufacturing: a review, J. Mater. Eng. Perform., 23, 1917, 10.1007/s11665-014-0958-z

Candel-Ruiz, 2011, Reparaturlösungen für höchste Ansprüche, Laser Tech. J., 6, 40, 10.1002/latj.201190075

Long, 2016, The influence of scanning methods on the cracking failure of thin-wall metal parts fabricated by laser direct deposition shaping, Eng. Fail. Anal., 59, 269, 10.1016/j.engfailanal.2015.10.011

Fang, 2015, The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition, Mater. Des., 87, 807, 10.1016/j.matdes.2015.08.061

Dinda, 2008, Fabrication of Ti-6Al-4V scaffolds by direct metal deposition, Metall. Mater. Trans. A, 39A, 2914, 10.1007/s11661-008-9634-y

Quian, 2015

Dawes, 2015, Introduction to the additive manufacturing powder metallurgy supply chain, Johns. Matthey Technol. Rev., 59, 243, 10.1595/205651315X688686

German, 1994, 167

Pinkerton, 2005, Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders, Int. J. Manuf. Technol., 25, 471, 10.1007/s00170-003-1844-2

Herbert, 2016, Viewpoint: metallurgical aspects of powder bed metal additive manufacturing, J. Mater. Sci., 51, 1165, 10.1007/s10853-015-9479-x

Starr, 2012, Controlling phase composition in selective laser melted stainless steels, 439

Murr, 2012, Microstructures and properties of 17-4 PH Stainless steel fabricated by selective laser melting, J. Mater. Res. Technol. Vol., 1, 167, 10.1016/S2238-7854(12)70029-7

Antony, 2003, Processes for production of high-purity metal powders, JOM, 55, 14, 10.1007/s11837-003-0153-4

Boulos, 2012, New frontiers in thermal plasmas from space to nanomaterials, Nucl. Eng. Technol., 44, 1, 10.5516/NET.77.2012.001

Entezarian, 1996, Plasma atomization: a new process for the production of fine, spherical powders, JOM, 48, 53, 10.1007/BF03222969

Agrawal, 2007, 79

Badrossamay, 2007, Further studies in selective laser melting of stainless and tool steel powders, Inter J Mach. Tools Manuf., 47, 779, 10.1016/j.ijmachtools.2006.09.013

Carlton, 2016, Damage evolution and failure mechanisms in additively manufactured stainless steel, Mater. Sci. Eng. A, 651, 406, 10.1016/j.msea.2015.10.073

Dadbaksh, 2012, Effect of selective laser melting layout on the quality of stainless steel parts, Rapid Prototyp. J. Vol., 18, 241, 10.1108/13552541211218216

Jerrard, 2009, Experimental investigation into selective laser melting of austenitic and martensitic stainless steel powder mixtures, Proc. IMechE, 223, 1409, 10.1243/09544054JEM1574

Li, 2010, 316L stainless steel with gradient porosity fabricated by selective laser melting, J Mater. Eng. Perform., 19, 666, 10.1007/s11665-009-9535-2

Li, 2011, The key metallurgical features of selective laser melting of stainless steel powder for building metallic part, Powder Metall. Metal Ceram., 50, 141, 10.1007/s11106-011-9311-3

Niendorf, 2013, Highly anisotropic steel processed by selective laser melting, Metall. Mater. Trans, 44B, 794, 10.1007/s11663-013-9875-z

Riemer, 2014, On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting, Eng. Fract. Mech., 120, 15, 10.1016/j.engfracmech.2014.03.008

Song, 2015, Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: a review, Front. Mech. Eng. Vol., 10, 111, 10.1007/s11465-015-0341-2

Spierings, 2009, Comparison of density of stainless steel 316L parts produced with selective laser melting using different powder grades

Tolosa, 2010, Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies, Int. J. Adv. Manuf. Tech., 51, 639, 10.1007/s00170-010-2631-5

Yadollahi, 2015, Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel, Mater. Sci. Eng. A, 644, 171, 10.1016/j.msea.2015.07.056

Yasa, 2011, Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting, Procedia Eng., 19, 389, 10.1016/j.proeng.2011.11.130

Ziolkowski, 2014, Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology, Arch. Civ. Mech. Eng., 14, 608, 10.1016/j.acme.2014.02.003

Abd-Elghany, 2012, Property evaluation of 304L stainless steel fabricated by selective laser melting, Rapid Prototyp. J., 18, 420, 10.1108/13552541211250418

Guan, 2013, Metastable austenite in 17–4 precipitation-hardening stainless steel produced by selective laser melting, Mater. Des., 50, 581, 10.1016/j.matdes.2013.03.056

Kempen, 2011, Microstructure and mechanical properties of selective laser melted 18Ni-300 steel, Phys. Proc., 12, 255, 10.1016/j.phpro.2011.03.033

Jägle, 2014, Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting, J. Mater. Res. Vol., 29, 2072, 10.1557/jmr.2014.204

Casalino, 2015, Experimental investigation and statistical optimization of the selective laser melting process of a maraging steel, Opt. Laser Technol., 65, 151, 10.1016/j.optlastec.2014.07.021

Burkert, 2015, The effects of heat balance on the void formation within marage 300 processed by selective laser melting, 745

Facchini, 2010, Metastable austenite in 17–4 precipitation-hardening stainless steel produced by selective laser melting, Adv. Eng. Mater., 12, 184, 10.1002/adem.200900259

LeBrun, 2015, Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel, Mater. Des., 81, 44, 10.1016/j.matdes.2015.05.026

Islam, 2013, Temperature profile and imaging analysis of laser additive manufacturing of stainless steel, Phys. Proc., 41, 835, 10.1016/j.phpro.2013.03.156

Krakhmalev, 2015, In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels, Mater. Des., 87, 380, 10.1016/j.matdes.2015.08.045

Zhao, 2015, Decarburization of stainless steel during selective laser melting and its influence on Young's modulus, hardness and tensile strength, Mater. Sci. Eng. A, 647, 58, 10.1016/j.msea.2015.08.061

Sigl, 2008

Cormier, 2004, Characterization of H13 steel produced via electron beam melting, Rapid Prototyp. J. Vol., 10, 35, 10.1108/13552540410512516

Majumdar, 2005, Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel, Appl. Surf. Sci., 247, 320, 10.1016/j.apsusc.2005.01.039

Mahmood, 2013, Direct laser deposition with different types of 316L steel particle: a comparative study of final part properties, J. Eng. Manuf. Vol., 227, 520

Mazumder, 1997, The direct metal deposition of H13 tool steel for 3-D components, JOM, 49, 55, 10.1007/BF02914687

Brice, 2015, Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing, Mater. Sci. Eng. A, 648, 9, 10.1016/j.msea.2015.08.088

Bartkowiak, 2011, New developments of laser processing aluminium alloys via additive manufacturing technique, Phys. Procedia, 12, 393, 10.1016/j.phpro.2011.03.050

Schmidtke, 2011, Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing, Phys. Procedia, 12, 369, 10.1016/j.phpro.2011.03.047

Fulcher, 2014, Comparison of AlSi10Mg and Al 6061 processed through DMLS

Louvis, 2011, Selective laser melting of aluminium components, J Mater. Proc Tech., 211, 275, 10.1016/j.jmatprotec.2010.09.019

Gu, 2012, Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium, Acta Mater., 60, 3849, 10.1016/j.actamat.2012.04.006

Attar, 2014, Manufacture by selective laser melting and mechanical behavior of commercially pure titanium, Mater. Sci. Eng. A, 593, 170, 10.1016/j.msea.2013.11.038

Barbas, 2012, Development and mechanical characterization of porous titanium bone substitutes, J Mech. Behav. Biomed. Mater., 9, 34, 10.1016/j.jmbbm.2012.01.008

Yamanaka, 2015, Preparation of weak-textured commercially pure titanium by electron beam melting, Addit. Manuf., 8, 105

Murr, 2009, Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V, Mater. Charact., 60, 96, 10.1016/j.matchar.2008.07.006

E. Wycisk, S. Siddique, D. Herzog, F. Walther, C. Emmelmann, Fatigue performance of laser additive manufactured Ti-6Al-4V in very high cycle fatigue regime up to 109 cycles, Front. Mater.. 2:72. http://dx.doi.org/10.3389/fmats.2015.00072.

Xu, 2015, Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition, Acta Mater., 85, 74, 10.1016/j.actamat.2014.11.028

Qiu, 2013, Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V, Mater. Sci. Eng. A, 578, 230, 10.1016/j.msea.2013.04.099

Facchini, 2010, Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders, Rapid Prototyp. J., 16, 450, 10.1108/13552541011083371

Koike, 2011, Evaluation of titanium alloys fabricated using rapid prototyping technologies - electron beam melting and laser beam melting, Materials, 4, 1776, 10.3390/ma4101776

Rafi, 2013, microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting, J. Mater. Eng. Perform., 22, 3872, 10.1007/s11665-013-0658-0

Yu, 2012, Material properties of Ti6Al4V parts produced by laser metal deposition, Phys. Proc., 39, 416, 10.1016/j.phpro.2012.10.056

Zhai, 2015, Microstructure evolution, tensile properties, and fatigue damage mechanisms in Ti-6Al-4V alloys fabricated by two additive manufacturing techniques, Procedia Eng., 114, 658, 10.1016/j.proeng.2015.08.007

Zhang, 2011, Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy, Scr. Mater., 65, 21, 10.1016/j.scriptamat.2011.03.024

Ren, 2015, Microstructural evolution and mechanical properties of laser melting deposited Ti−6.5Al−3.5Mo−1.5Zr−0.3Si titanium alloy, Trans. Nonferrous Met. Soc. China, 25, 1856, 10.1016/S1003-6326(15)63792-X

Yadroitsev, 2007, Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder, Appl. Surf. Sci., 254, 980, 10.1016/j.apsusc.2007.08.046

Nie, 2014, Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy, Acta Mater., 77, 85, 10.1016/j.actamat.2014.05.039

Körner, 2014, Tailoring the grain structure of IN718 during selective electron beam melting, Matec. Web Conf., 14

Dehoff, 2015, Site specific control of crystallographic grain orientation through electron beam additive manufacturing, Mater. Sci. Tech., 31, 931, 10.1179/1743284714Y.0000000734

Vandenbroucke, 2013, Selective laser melting of biocompatible metals for rapid manufacturing of medical parts, Rapid Prototyp. J., 13, 196, 10.1108/13552540710776142

Xin, 2012, In vitro biocompatibility of Co–Cr alloy fabricated by selective laser melting or traditional casting techniques, Mater. Lett., 88, 101, 10.1016/j.matlet.2012.08.032

Qiu, 2016, Selective laser melting of Invar 36: microstructure and properties, Acta Mater., 103, 382, 10.1016/j.actamat.2015.10.020

Ng, 2011, Microstructure and mechanical properties of selective laser melted magnesium, Appl. Surf. Sci., 257, 7447, 10.1016/j.apsusc.2011.03.004

Thijs, 2013, Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum, Acta Mater., 61, 4657, 10.1016/j.actamat.2013.04.036

Khan, 2010, Selective laser melting (SLM) of pure gold, Gold Bull., 43, 114, 10.1007/BF03214976

Lütjering, 2003, 17

Poprawe, 2015, SLM production systems: recent developments in process development, machine concepts and component design, 57

Kelly, 2004, Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: part I. Microstructural characterization, Metall. Mater. Trans A, 35A, 1861, 10.1007/s11661-004-0094-8

Vora, 2015, AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting, Addit. Manuf., 7, 12

Prashanth, 2014, Microstructure and mechanical properties of Al-12Si produced by selective laser melting: effect of heat treatment, Mater. Sci. Eng. A, 590, 153, 10.1016/j.msea.2013.10.023

Maskery, 2016, Quantification and characterisation of porosity in selectively lasermelted Al-Si10-Mg using X-ray computed tomography, Mater. Charact., 111, 193, 10.1016/j.matchar.2015.12.001

Aboulkhair, 2015, On the precipitation hardening of selective laser melted AlSi10Mg, Metall. Mater. Trans. A, 46A, 3337, 10.1007/s11661-015-2980-7

Brandl, 2012, Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior, Mater. Des., 34, 159, 10.1016/j.matdes.2011.07.067

Thijs, 2013, Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder, Acta Mater., 61, 1809, 10.1016/j.actamat.2012.11.052

F. Palm, K. Schmidtke, Exceptional grain refinement in directly built up Sc-modified AlMg-alloys is promising a quantum leap in ultimate light weight design, Proc of the 9th Int Conf Trends in Welding Research, June 4th-8th 2012, Chicago, USA, 108–115.

Mahale, 2007, Advances in electron beam melting of aluminum alloys

Dinda, 2012, Evolution of microstructure in laser deposited Al-11.28%Si alloy, Surf. Coat Tech., 206, 2152, 10.1016/j.surfcoat.2011.09.051

Seyda, 2015

Baufeld, 2011, Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition, J Mater. Proc Tech., 211, 1146, 10.1016/j.jmatprotec.2011.01.018

ASTM A276, Standard Specification for Stainless Steel Bars and Shapes.

Mertens, 2014, Mechanical properties of alloy Ti–6Al–4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures, Powder Metall., 57, 184, 10.1179/1743290114Y.0000000092

ASTM A564, Standard Specification for Hot-rolled and Cold-finished Age-hardening Stainless Steel Bars and Shapes.

Kempen, 2012, Mechanical properties of AlSi10Mg produced by selective laser melting, Phys. Procedia, 39, 439, 10.1016/j.phpro.2012.10.059

DIN EN 1706, 2013

Manfredi, 2014, Additive manufacturing of Al alloys and aluminium matrix composites (AMCs), Mater. Sci., 15

Krishnan, 2014

Read, 2015, High power selective laser melting (HP SLM) of aluminum parts, Mater. Des., 65, 417, 10.1016/j.matdes.2014.09.044

Buchbinder, 2011, High power selective laser melting (HP SLM) of aluminum parts, Phys. Proc., 12, 271, 10.1016/j.phpro.2011.03.035

Bajoraitis, 1988, Forming of titanium and titanium alloys, 1836

ASTM F1108-14, 2014

Donachie, 2000

ASTM F1472-14, 2014

Campbell, 2012, 231

Boyer, 1994, pp1051

Brandl, 2010

Wycisk, 2014, Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties, Phys. Proc., 56, 371, 10.1016/j.phpro.2014.08.120

Buchbinder, 2013

Leuders, 2013, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance, Int. J. Fatigue, 48, 300, 10.1016/j.ijfatigue.2012.11.011

Peters, 1983

Gerdes, 1983

Wirtz, 2005

Kausch, 2013

Kammer, 2012, 228

Siddique, 2015, Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting, J. Mater. Proc. Tech., 221, 205, 10.1016/j.jmatprotec.2015.02.023

Greitemeier, 2013, Additive layer manufacturing og Ti-6AL-4V and ScalmalloyRP: fatigue and fracture

Sehrt, 2010

Kitagawa, 1976, Applicability of fracture mechanics to very small cracks, p627

Brandl, 2012, High cycle fatigue properties of electron beam melted Ti-6Al-4V samples without and with integrated defects (“Effects of defects”)

Siddique, 2015, Computed tomography for characterization of fatigue performance of selective laser melted parts, Mater. Des., 83, 661, 10.1016/j.matdes.2015.06.063

Emmelmann, 2011, Laser Additive Manufacturing of modified implant surfaces with osseointegrative characteristics, Phys. Proc., 12, 375, 10.1016/j.phpro.2011.03.048