Additive manufacturing of metallic components – Process, structure and properties
Tóm tắt
Từ khóa
Tài liệu tham khảo
Milewski, 2017, Additive manufacturing of metals, vol. 258
Sames, 2016, The metallurgy and processing science of metal additive manufacturing, Int Mater Rev, 61, 315, 10.1080/09506608.2015.1116649
Korner, 2016, Additive manufacturing of metallic components by selective electron beam melting - a review, Int Mater Rev, 61, 361, 10.1080/09506608.2016.1176289
Bourell, 2016, Perspectives on additive manufacturing, Ann Rev Mater Res, 46, 1, 10.1146/annurev-matsci-070115-031606
King, 2015, Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges, Appl Phys Rev, 2, 041304, 10.1063/1.4937809
Gu, 2012, Laser additive manufacturing of metallic components: materials, processes and mechanisms, Int Mater Rev, 57, 133, 10.1179/1743280411Y.0000000014
Collins, 2016, Microstructural control of additively manufactured metallic materials, Ann Rev Mater Res, 46, 63, 10.1146/annurev-matsci-070115-031816
Lewandowski, 2016, Metal additive manufacturing: a review of mechanical properties, Ann Rev Mater Res, 46, 151, 10.1146/annurev-matsci-070115-032024
Olakanmi, 2015, A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties, Prog Mater Sci, 74, 401, 10.1016/j.pmatsci.2015.03.002
Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, et al. Review of selective laser melting: Materials and applications. Appl Phys Rev 2015;2(4).
Standard terminology for additive manufacturing technologies. ASTM Int 2013;F2792–12a.
Frazier, 2014, Metal additive manufacturing: a review, J Mater Eng Perform, 23, 1917, 10.1007/s11665-014-0958-z
Herderick, 2011, Additive manufacturing of metals: a review, Mater Sci Tech, 1413
Tapia, 2014, A review on process monitoring and control in metal-based additive manufacturing, J Manuf Sci Eng, 136, 060801, 10.1115/1.4028540
Imran, 2011, Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: evaluation of mechanical properties, Mater Sci Eng A, 528, 3342, 10.1016/j.msea.2010.12.099
Keist, 2016, Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition, Mater Des, 106, 482, 10.1016/j.matdes.2016.05.045
Ma, 2015, Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy, Mater Charact, 106, 420, 10.1016/j.matchar.2015.06.027
Malukhin, 2006, Material characterization of NiTi based memory alloys fabricated by the laser direct metal deposition process, J Manuf Sci Eng, 128, 691, 10.1115/1.2193553
Riza, 2014, Dynamic behaviour of high strength steel parts developed through laser assisted direct metal deposition, Mater Des, 64, 650, 10.1016/j.matdes.2014.08.026
Shah, 2010, Effects of melt pool variables and process parameters in laser direct metal deposition of aerospace alloys, Mater Manuf Process, 25, 1372, 10.1080/10426914.2010.480999
Baufeld, 2011, Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition, J Mater Process Technol, 211, 1146, 10.1016/j.jmatprotec.2011.01.018
Brandl, 2011, Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire, Mater Des, 32, 4665, 10.1016/j.matdes.2011.06.062
Brandl, 2012, Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM), Mater Sci Eng A, 532, 295, 10.1016/j.msea.2011.10.095
Wang, 2015, Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing, J Alloy Comp, 632, 505, 10.1016/j.jallcom.2015.01.256
Ding, 2015, Wire-feed additive manufacturing of metal components: technologies, developments and future interests, Int J Adv Manuf Technol, 81, 465, 10.1007/s00170-015-7077-3
Ding, 2011, Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts, Comp Mater Sci, 50, 3315, 10.1016/j.commatsci.2011.06.023
Williams, 2016, Wire plus arc additive manufacturing, Mater Sci Tech, 32, 641, 10.1179/1743284715Y.0000000073
Xiong, 2017, Fabrication of inclined thin-walled parts in multi-layer single-pass GMAW-based additive manufacturing with flat position deposition, J Mater Process Technol, 240, 397, 10.1016/j.jmatprotec.2016.10.019
Hildreth OJ, Nassar AR, Chasse KR, Simpson TW. Dissolvable metal supports for 3D direct metal printing. 3d Print Addit Manuf 2016;3(2):90–7.
Bhavar V, Kattire P, Patil V, Khot S, Gujar K, Singh R. A review on powder bed fusion technology of metal additive manufacturing. In: 4th International conference and exhibition on additive manufacturing technologies; 2014. p. 1–2.
Jamshidinia, 2015, Additive manufacturing of steel alloys using laser powder-bed fusion, Adv Mater Process, 173, 20
Kamath, 2014, Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W, Int J Adv Manuf Technol, 74, 65, 10.1007/s00170-014-5954-9
Khairallah, 2016, Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones, Acta Mater, 108, 36, 10.1016/j.actamat.2016.02.014
Mower, 2016, Mechanical behavior of additive manufactured, powder-bed laser-fused materials, Mater Sci Eng A, 651, 198, 10.1016/j.msea.2015.10.068
Dehoff, 2010, Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing, Acta Mater, 58, 4305, 10.1016/j.actamat.2010.03.006
Ram, 2007, Use of ultrasonic consolidation for fabrication of multi-material structures, Rapid Prototyp J, 13, 226, 10.1108/13552540710776179
Ultrasonic additive manufacturing <http://www.insidemetaladditivemanufacturing.com/blog/ultrasonic-additive-manufacturing> [browsed November 2016].
Meteyer S, Xu X, Perry N, Zhao YF. Energy and material flow analysis of binder-jetting additive manufacturing processes. In: 21st CIRP conference on life cycle engineering; 2014. p. 19–25.
Thompson DA. Binder jet additive manufacturing <http://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/binderjetting/> [browsed January 2017].
Karlsson, 2013, Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions, J Mater Process Technol, 213, 2109, 10.1016/j.jmatprotec.2013.06.010
Zhao, 2008, Study on microstructure and mechanical properties of laser rapid forming Inconel 718, Mater Sci Eng A, 478, 119, 10.1016/j.msea.2007.05.079
Slotwinski, 2014, Characterization of metal powders used for additive manufacturing, J Res Natl Inst Stan, 119, 460, 10.6028/jres.119.018
Santomaso, 2003, Powder flowability and density ratios: the impact of granules packing, Chem Eng Sci, 58, 2857, 10.1016/S0009-2509(03)00137-4
Anderson, 1991, Flow mechanisms in high-pressure gas atomization, Mater Sci Eng A, 148, 101, 10.1016/0921-5093(91)90870-S
Bourdeau RG. Rotary atomizing process. US Patent 1983; No. 4415511.
Champagne, 1984, REP (Rotating Electrode Process) atomization mechanisms, Powder Metall Int, 16, 125
Ozols, 1999, Segregation in Stellite powders produced by the plasma rotating electrode process, Mater Sci Eng A, 262, 64, 10.1016/S0921-5093(98)01021-1
Seki, 1990, Effect of atomization variables on powder characteristics in the high-pressured water atomization process, Met Powder Rep, 45, 38, 10.1016/S0026-0657(10)80014-1
Pinkerton, 2005, Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders, Int J Adv Manuf Technol, 25, 471, 10.1007/s00170-003-1844-2
Schade CT, Murphy TF, Walton C. Development of atomized powders for additive manufacturing. In: Powder metallurgy word congress; 2014.
Sames W, Medina F, Peter W, Babu S, Dehoff R. Effect of process control and powder quality on Inconel 718 produced using electron beam melting. In: Proceedings of the 8th international symposium on superalloy 718 and derivatives; 2014. p. 409.
Liu B, Wildman R, Tuck C, Ashcroft I, Hague R. Investigation the effect of particle size distribution on processing parameters optimisation in selective laser melting process. In: International solid freeform fabrication symposium: an additive manufacturing conference. University of Texas at Austin; 2011. p. 227–38.
Qi H, Azer M, Ritter A. Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured Inconel 718. Metall Mater Trans A 2009;40a(10):2410–22.
Tang, 2015, Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting, JOM, 67, 555, 10.1007/s11837-015-1300-4
Stecker S, Lachenberg K, Wang H, Salo R. Advanced electron beam free form fabrication methods & technology. In: AWS welding show. Atlanta (GA); 2006. p. 35–46.
Syed, 2006, Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping, Appl Surf Sci, 252, 4803, 10.1016/j.apsusc.2005.08.118
Zhou, 2009, Numerical simulation of random packing of spherical particles for powder-based additive manufacturing, J Manuf Sci Eng, 131, 031004, 10.1115/1.3123324
Klassen, 2014, Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods, J Phys D Appl Phys, 47, 10.1088/0022-3727/47/27/275303
Kovaleva, 2014, Model of heat and mass transfer in random packing layer of powder particles in selective laser melting, Phys Proc, 56, 400, 10.1016/j.phpro.2014.08.143
Lee, 2016, Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion, Addit Manuf, 12, 178
Beving, 2006, Corrosion resistant high-silica-zeolite MFI coating - One general solution formulation for aluminum alloy AA-2024-T3, AA-5052-H32, AA-6061-T4, and AA-7075-T6, J Electrochem Soc, 153, B325, 10.1149/1.2207845
Cormier, 2004, Characterization of H13 steel produced via electron beam melting, Rapid Prototyp J, 10, 35, 10.1108/13552540410512516
Rahman, 1997, The machinability of Inconel 718, J Mater Process Technol, 63, 199, 10.1016/S0924-0136(96)02624-6
Seshacharyulu, 2002, Microstructural mechanisms during hot working of commercial grade Ti-6Al-4V with lamellar starting structure, Mater Sci Eng A, 325, 112, 10.1016/S0921-5093(01)01448-4
Wendt, 1985, The ac corrosion of stainless steel—II. The polarization of ss304 and ss316 in acid sulfate solutions, Corros Sci, 25, 901, 10.1016/0010-938X(85)90020-4
Yun, 1984, The effect of high-temperature reactor primary circuit helium on the formation and propagation of surface cracks in Alloy 800-H and Inconel-617, J Nucl Mater, 125, 258, 10.1016/0022-3115(84)90553-1
Farahmand, 2014, An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser, Opt Laser Technol, 63, 154, 10.1016/j.optlastec.2014.04.016
Martukanitz, 2014, Toward an integrated computational system for describing the additive manufacturing process for metallic materials, Addit Manuf, 1, 52
Peyre, 2008, Analytical and numerical modelling of the direct metal deposition laser process, J Phys D Appl Phys, 41, 10.1088/0022-3727/41/2/025403
Lim, 1982, Measurement of the temporal and spatial power distribution of a high-power CO2-laser beam, Opt Laser Technol, 14, 149, 10.1016/0030-3992(82)90111-6
Lasers and laser-related equipment-Test methods for laser beam widths, divergence angles and beam propagation ratios.ISO Standard. 2005;11146–2.
Elmer JW, Hochanadel P, Lachenberg K, Webber T. Introduction to high energy density electron and laser beam welding. In: Joining: welding fundamentals and processes; 2009.
LaFlamme, 1991, Diagnostic device quantifies, defines geometric characteristics of electron-beams, Weld J, 70, 33
Elmer JW, Teruya A, O'Brien D. Tomographic imaging of noncircular and irregular electron beam current density distributions. Weld J 1993;72(11).
Elmer, 2001, An enhanced faraday cup for rapid determination of power density distribution in electron beams, Weld J, 80, 288s
Palmer, 2007, Characterisation of electron beams at different focus settings and work distances in multiple welders using the enhanced modified Faraday cup, Sci Technol Weld Join, 12, 161, 10.1179/174329307X176631
Lu, 1988, Power and current distributions in gas tungsten arcs, Weld J, 67, S29
Manvatkar V, De A, DebRoy T. Heat transfer and material flow during laser assisted multi-layer additive manufacturing. J Appl Phys 2014;116(12): Article No. 124905.
Wang, 2002, Direct selective laser sintering of hard metal powders: experimental study and simulation, Int J Adv Manuf Technol, 19, 351, 10.1007/s001700200024
Miranda, 2008, Rapid prototyping with high power fiber lasers, Mater Des, 29, 2072, 10.1016/j.matdes.2008.03.030
Lv, 2007, Arc heating hot wire assisted arc welding technique for low resistance welding wire, Sci Technol Weld Join, 12, 431, 10.1179/174329307X213828
He, 2006, Liquid metal expulsion during laser spot welding of 304 stainless steel, J Phys D Appl Phys, 39, 525, 10.1088/0022-3727/39/3/016
Mumtaz, 2010, Selective laser melting of thin wall parts using pulse shaping, J Mater Process Technol, 210, 279, 10.1016/j.jmatprotec.2009.09.011
Eschey C, Lutzmann S, Zaeh M. Examination of the powder spreading effect in Electron Beam Melting (EBM). In: Solid freeform fabrication. Austin (TX); 2009. p. 3–5.
Kahnert M, Lutzmann S, Zaeh M. Layer formations in electron beam sintering. In: Solid freeform fabrication symposium; 2007. p. 88–99.
Mughal, 2005, Deformation modelling in layered manufacturing of metallic parts using gas metal arc welding: effect of process parameters, Model Simul Mater Sc, 13, 1187, 10.1088/0965-0393/13/7/013
Vasinonta, 2007, Process maps for predicting residual stress and melt pool size in the laser-based fabrication of thin-walled structures, J Manuf Sci Eng, 129, 101, 10.1115/1.2335852
Goldak, 1984, A new finite-element model for welding heat-sources, Metall Trans B, 15, 299, 10.1007/BF02667333
Svensson, 1986, An analysis of cooling curves from the fusion zone of steel weld deposits, Scand J Metall, 15, 97
Markl, 2016, Multiscale modeling of powder bed-based additive manufacturing, Ann Rev Mater Res, 46, 93, 10.1146/annurev-matsci-070115-032158
Manvatkar, 2015, Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process, Mater Sci Tech, 31, 924, 10.1179/1743284714Y.0000000701
Raghavan A, Wei HL, Palmer TA, DebRoy T. Heat transfer and fluid flow in additive manufacturing. J Laser Appl 2013;25(5): Article No. 052006.
Patankar S. Numerical heat transfer and fluid flow. CRC Press; 1980.
David, 1992, Current issues and problems in welding science, Science, 257, 497, 10.1126/science.257.5069.497
Mcnallan, 1991, Effect of temperature and composition on surface-tension in Fe-Ni-Cr alloys containing sulfur, Metall Trans B, 22, 557, 10.1007/BF02654294
Sahoo, 1988, Surface-tension of binary metal - surface-active solute systems under conditions relevant to welding metallurgy, Metall Trans B, 19, 483, 10.1007/BF02657748
Mishra, 2008, An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations, Acta Mater, 56, 2133, 10.1016/j.actamat.2008.01.028
Pitscheneder, 1996, Role of sulfur and processing variables on the temporal evolution of weld pool geometry during multikilowatt laser beam welding of steels, Weld J, 75, S71
Michaleris, 2014, Modeling metal deposition in heat transfer analyses of additive manufacturing processes, Finite Elem Anal Des, 86, 51, 10.1016/j.finel.2014.04.003
Mills KC. Recommended values of thermophysical properties for selected commercial alloys. Woodhead Publishing; 2002.
Nandan, 2008, Recent advances in friction-stir welding - process, weldment structure and properties, Prog Mater Sci, 53, 980, 10.1016/j.pmatsci.2008.05.001
Fathi, 2006, Prediction of melt pool depth and dilution in laser powder deposition, J Phys D Appl Phys, 39, 2613, 10.1088/0022-3727/39/12/022
Huang, 2016, A comprehensive analytical model for laser powder-fed additive manufacturing, Addit Manuf, 12, 90
Picasso, 1994, A simple but realistic model for laser cladding, Metall Mater Trans B, 25, 281, 10.1007/BF02665211
Cheng B, Chou K. Melt pool geometry simulations for powder-based electron beam additive manufacturing. In: 24th Annual international solid freeform fabrication symposium-an additive manufacturing conference. Austin (TX, USA); 2013.
Contuzzi, 2011, 3D finite element analysis in the selective laser melting process, Int J Simul Model, 10, 113, 10.2507/IJSIMM10(3)1.169
Hodge, 2014, Implementation of a thermomechanical model for the simulation of selective laser melting, Comput Mech, 54, 33, 10.1007/s00466-014-1024-2
Ilin, 2014, Computer aided optimisation of the thermal management during laser beam melting process, Phys Proc, 56, 390, 10.1016/j.phpro.2014.08.142
Jamshidinia, 2015, The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing, Surf Topogr Metrol Prop, 3, 10.1088/2051-672X/3/1/014003
Prabhakar, 2015, Computational modeling of residual stress formation during the electron beam melting process for Inconel 718, Addit Manuf, 7, 83
Riedlbauer, 2014, Thermomechanical finite element simulations of selective electron beam melting processes: performance considerations, Comput Mech, 54, 109, 10.1007/s00466-014-1026-0
Soylemez E, Beuth JL, Taminger K. Controlling melt pool dimensions over a wide range of material deposition rates in electron beam additive manufacturing. In: Proceedings of 21st solid freeform fabrication symposium. Austin (TX); 2010. p. 9–11.
Verhaeghe, 2009, A pragmatic model for selective laser melting with evaporation, Acta Mater, 57, 6006, 10.1016/j.actamat.2009.08.027
Zeng, 2015, Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS, Mater Sci Tech, 31, 945, 10.1179/1743284714Y.0000000703
Jamshidinia, 2013, Numerical modeling of heat distribution in the electron beam melting® of Ti-6Al-4V, J Manuf Sci Eng, 135, 061010, 10.1115/1.4025746
Yuan, 2015, Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments, J Phys D Appl Phys, 48, 10.1088/0022-3727/48/3/035303
Gusarov, 2010, Modeling the interaction of laser radiation with powder bed at selective laser melting, Phys Proc, 5, 381, 10.1016/j.phpro.2010.08.065
He X, Mazumder J. Transport phenomena during direct metal deposition. J Appl Phys 2007;101(5): Article No. 053113.
Morville, 2012, 2D longitudinal modeling of heat transfer and fluid flow during multilayered direct laser metal deposition process, J Laser Appl, 24, 10.2351/1.4726445
Qi H, Mazumder J, Ki H. Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition. J Appl Phys 2006;100(2): Article No. 024903.
Wen SY, Shin YC. Modeling of transport phenomena during the coaxial laser direct deposition process. J Appl Phys 2010;108(4): Article No. 044908.
Lee, 2014, Effect of fluid convection on dendrite arm spacing in laser deposition, Metall Mater Trans B, 45, 1520, 10.1007/s11663-014-0054-7
Lee Y, Zhang W. Mesoscopic simulation of heat transfer and fluid flow in laser powder bed additive manufacturing. In: International solid free form fabrication symposium. Austin; 2015. p. 1154–65.
Khairallah, 2014, Mesoscopic simulation model of selective laser melting of stainless steel powder, J Mater Process Technol, 214, 2627, 10.1016/j.jmatprotec.2014.06.001
King, 2015, Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory, Mater Sci Tech, 31, 957, 10.1179/1743284714Y.0000000728
Korner, 2011, Mesoscopic simulation of selective beam melting processes, J Mater Process Technol, 211, 978, 10.1016/j.jmatprotec.2010.12.016
Korner, 2013, Fundamental consolidation mechanisms during selective beam melting of powders, Model Simul Mater Sci, 21, 10.1088/0965-0393/21/8/085011
Moser, 2016, Computation of effective thermal conductivity of powders for selective laser sintering simulations, J Heat Transf, 138, 10.1115/1.4033351
Roberts, 2009, A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing, Int J Mach Tool Manuf, 49, 916, 10.1016/j.ijmachtools.2009.07.004
Zhang, 2004, Investigation of Lagrangian and Eulerian finite element methods for modeling the laser forming process, Finite Elem Anal Des, 40, 383, 10.1016/S0168-874X(03)00069-6
Amine, 2014, Investigation of effect of process parameters on multilayer builds by direct metal deposition, Appl Therm Eng, 73, 500, 10.1016/j.applthermaleng.2014.08.005
Hu, 2000, Measurement of temperature distributions during laser cladding process, J Laser Appl, 12, 126, 10.2351/1.521921
Shishkovsky, 2008, Surface laser sintering of exothermic powder compositions, J Therm Anal Calorim, 91, 427, 10.1007/s10973-007-8353-8
Benda J. Temperature controlled selective laser sintering. In: Proceedings of the solid freeform fabrication symposium; 1994. p. 277–284.
Doubenskaia M, Pavlov M, Chivel Y. Optical system for on-line monitoring and temperature control in selective laser melting technology. In: Key engineering materials; 2010. p. 458–61.
Hu, 2003, Sensing, modeling and control for laser-based additive manufacturing, Int J Mach Tool Manu, 43, 51, 10.1016/S0890-6955(02)00163-3
Jian X, Jinghua S, Yiqingc G. Novel measurement method for selective laser sintering transient temperature field. In: 3rd International symposium on advanced optical manufacturing and testing technologies: optical test and measurement technology and equipment; 2007. p. 67234N–67234N.
Price S, Cooper K, Chou K. Evaluations of temperature measurements by near-infrared thermography in powder-based electron-beam additive manufacturing. In: Proceedings of the solid freeform fabrication symposium. Austin (TX): University of Texas; 2012. p. 761–73.
Mukherjee, 2017, An improved prediction of residual stresses and distortion in additive manufacturing, Comp Mater Sci, 126, 360, 10.1016/j.commatsci.2016.10.003
Elmer, 1989, Microstructural development during solidification of stainless-steel alloys, Metall Trans A, 20, 2117, 10.1007/BF02650298
Mukherjee T, Manvatkar V, De A, DebRoy T. Dimensionless numbers in additive manufacturing. J Appl Phys 2017;121: Article No. 064904.
Kistler, 2017, Effect of directed energy deposition processing parameters on laser deposited Inconel® 718: microstructure, fusion zone morphology, and hardness, J Laser Appl, 29, 022005, 10.2351/1.4979702
Antonysamy, 2012
Sames, 2014, Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting, J Mater Res, 29, 1920, 10.1557/jmr.2014.140
Shen N, Chou Y. Numerical thermal analysis in electron beam additive manufacturing with preheating effects. In: Proceedings of the 23rd solid freeform fabrication symposium. Austin (TX); 2012. p. 774–84.
Li, 2014, Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder, Mater Des, 63, 856, 10.1016/j.matdes.2014.07.006
Yin, 2010, Dendrite growth simulation during solidification in the LENS process, Acta Mater, 58, 1455, 10.1016/j.actamat.2009.10.053
Carroll, 2015, Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing, Acta Mater, 87, 309, 10.1016/j.actamat.2014.12.054
van Elsen, 2008, Application of dimensional analysis to selective laser melting, Rapid Prototyp J, 14, 15, 10.1108/13552540810841526
Mukherjee T, Zuback JS, De A, DebRoy T. Printability of alloys for additive manufacturing. Sci Rep 2016;6: Article No. 9717.
Wei P. The physics of weld bead defects. INTECH Open Access Publisher; 2012.
Soderstrom, 2006, Humping mechanisms present in high speed welding, Sci Technol Weld Join, 11, 572, 10.1179/174329306X120787
Kumar, 2006, Toward a unified model to prevent humping defects in gas tungsten arc welding, Weld J, 85, 292s
Kazanas, 2012, Fabrication of geometrical features using wire and arc additive manufacture, Proc Inst Mech Eng Part B-J Eng Manuf, 226, 1042, 10.1177/0954405412437126
Adebayo A, Mehnen J, Tonnellier X. Limiting travel speed in additive layer manufacturing. In: 9th International conference on trends in welding research. Chicago (IL, USA); 2013.
Martina, 2012, Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V, J Mater Process Technol, 212, 1377, 10.1016/j.jmatprotec.2012.02.002
Wang, 2011, Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy, Int J Adv Manuf Technol, 57, 597, 10.1007/s00170-011-3299-1
Lopes, 2007
Gusarov, 2007, Heat transfer modelling and stability analysis of selective laser melting, Appl Surf Sci, 254, 975, 10.1016/j.apsusc.2007.08.074
Khan, 1984, Alloying element vaporization and weld pool temperature during laser-welding of AISI 202 stainless steel, Metall Trans B, 15, 641, 10.1007/BF02657284
Borisov, 1999, Inductively coupled plasma mass spectrometric study of non-linear calibration behavior during laser ablation of binary Cu-Zn Alloys, Spectrochim Acta B, 54, 1351, 10.1016/S0584-8547(99)00083-X
Brice CA, Rosenberger BT, Sankaran SN, Taminger KM, Woods B, Nasserrafi R. Chemistry control in electron beam deposited titanium alloys. Mater Sci Forum 2009;155–8.
Brice, 2015, Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing, Mater Sci Eng A, 648, 9, 10.1016/j.msea.2015.08.088
Gaytan, 2009, Advanced metal powder based manufacturing of complex components by electron beam melting, Mater Technol, 24, 180, 10.1179/106678509X12475882446133
Taminger K. Electron beam additive manufacturing: state-of-the-technology, challenges & opportunities. In: Direct digital manufacturing workshop. Solomons (MD); 2010.
He, 2003, Alloying element vaporization during laser spot welding of stainless steel, J Phys D Appl Phys, 36, 3079, 10.1088/0022-3727/36/23/033
Mundra, 1993, Toward understanding alloying element vaporization during laser-beam welding of stainless steel, Weld J, 72, S1
Semiatin, 2004, Diffusion models for evaporation losses during electron-beam melting of alpha/beta-titanium alloys, Metall Mater Trans B, 35, 235, 10.1007/s11663-004-0025-5
He, 2004, Composition change of stainless steel during microjoining with short laser pulse, J Appl Phys, 96, 4547, 10.1063/1.1785868
Zhao, 2001, Weld metal composition change during conduction mode laser welding of aluminum alloy 5182, Metall Mater Trans B, 32, 163, 10.1007/s11663-001-0018-6
Mundra, 1993, Calculation of weld metal composition change in high-power conduction mode carbon-dioxide laser-welded stainless steels, Metall Trans B, 24, 145, 10.1007/BF02657881
Khan, 1988, Laser-beam welding of high-manganese stainless steels - examination of alloying element loss and microstructural changes, Weld J, 67, S1
Collur, 1987, Mechanism of alloying element vaporization during laser-welding, Metall Trans B, 18, 733, 10.1007/BF02672891
Matthews, 2016, Denudation of metal powder layers in laser powder bed fusion processes, Acta Mater, 114, 33, 10.1016/j.actamat.2016.05.017
Barclay, 2013
Morgan, 2004, Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives, J Mater Sci, 39, 1195, 10.1023/B:JMSC.0000013875.62536.fa
Olakanmi, 2011, Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders, J Mater Process Technol, 211, 113, 10.1016/j.jmatprotec.2010.09.003
Jia, 2014, Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties, J Alloy Comp, 585, 713, 10.1016/j.jallcom.2013.09.171
Carlton, 2016, Damage evolution and failure mechanisms in additively manufactured stainless steel, Mater Sci Eng A, 651, 406, 10.1016/j.msea.2015.10.073
King, 2014, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing, J Mater Process Technol, 214, 2915, 10.1016/j.jmatprotec.2014.06.005
Kaplan, 1994, A model of deep penetration laser-welding based on calculation of the keyhole profile, J Phys D Appl Phys, 27, 1805, 10.1088/0022-3727/27/9/002
Svensson M, Ackelid U, Ab A. Titanium alloys manufactured with electron beam melting mechanical and chemical properties. In: Proceedings of the materials and processes for medical devices conference; 2010. p. 189–94.
Darvish, 2016, Reducing lack of fusion during selective laser melting of CoCrMo alloy: effect of laser power on geometrical features of tracks, Mater Des, 112, 357, 10.1016/j.matdes.2016.09.086
Elmer JW, Vaja J, Carlton H, Pong R. The effect of Ar and N2 shielding gas on laser weld porosity in steel, stainless steels, and nickel. Weld J 2015;94(10).
Elmer, 2016, The effect of reduced pressure on laser keyhole weld porosity and weld geometry in commercially pure titanium and nickel, Weld J, 95, 419S
Thijs, 2010, A study of the micro structural evolution during selective laser melting of Ti-6Al-4V, Acta Mater, 58, 3303, 10.1016/j.actamat.2010.02.004
Aboulkhair, 2014, Reducing porosity in AlSi10Mg parts processed by selective laser melting, Addit Manuf, 1, 77
Bauereiss, 2014, Defect generation and propagation mechanism during additive manufacturing by selective beam melting, J Mater Process Technol, 214, 2522, 10.1016/j.jmatprotec.2014.05.002
Slotwinski, 2014, Porosity measurements and analysis for metal additive manufacturing process control, J Res Natl Inst Stan, 119, 494, 10.6028/jres.119.019
Girardin, 2011, Characterization of porosity in a laser sintered MMCp using X-ray synchrotron phase contrast microtomography, Mater Sci Appl, 2, 1322
Gong X, Anderson T, Chou K. Review on powder-based electron beam additive manufacturing technology. In: ASME/ISCIE 2012 international symposium on flexible automation; 2012. p. 507–15.
Strano, 2013, Surface roughness analysis, modelling and prediction in selective laser melting, J Mater Process Technol, 213, 589, 10.1016/j.jmatprotec.2012.11.011
Mumtaz, 2009, Top surface and side roughness of Inconel 625 parts processed using selective laser melting, Rapid Prototyp J, 15, 96, 10.1108/13552540910943397
Lyczkowska, 2014, Chemical polishing of scaffolds made of Ti-6Al-7Nb alloy by additive manufacturing, Arch Civ Mech Eng, 14, 586, 10.1016/j.acme.2014.03.001
Dehoff, 2013, Case study: additive manufacturing of aerospace brackets, Adv Mater Process, 171, 19
Mumtaz, 2010, Selective laser melting of Inconel 625 using pulse shaping, Rapid Prototyp J, 16, 248, 10.1108/13552541011049261
Rahmati, 2015, Evaluation of analytical modeling for improvement of surface roughness of FDM test part using measurement results, Int J Adv Manuf Technol, 79, 823, 10.1007/s00170-015-6879-7
Qiu, 2015, On the role of melt flow into the surface structure and porosity development during selective laser melting, Acta Mater, 96, 72, 10.1016/j.actamat.2015.06.004
Kruth, 2004, Selective laser melting of iron-based powder, J Mater Process Technol, 149, 616, 10.1016/j.jmatprotec.2003.11.051
Niu, 1999, Instability of scan tracks of selective laser sintering of high speed steel powder, Scripta Mater, 41, 1229, 10.1016/S1359-6462(99)00276-6
Gu, 2009, Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods, Mater Des, 30, 2903, 10.1016/j.matdes.2009.01.013
Kruth, 2007, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann Manuf Techn, 56, 730, 10.1016/j.cirp.2007.10.004
Yasa, 2011, The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts, Rapid Prototyp J, 17, 312, 10.1108/13552541111156450
Calignano, 2013, Influence of process parameters on surface roughness of aluminum parts produced by DMLS, Int J Adv Manuf Technol, 67, 2743, 10.1007/s00170-012-4688-9
Spierings, 2011, Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts, Rapid Prototyp J, 17, 195, 10.1108/13552541111124770
Kempen K, Thijs L, Vrancken B, Buls S, Van Humbeeck J, Kruth J. Producing crack-free, high density M2 Hss parts by selective laser melting: pre-heating the baseplate. In: Proceedings of the 24th international solid freeform fabrication symposium. Austin (TX): Laboratory for freeform fabrication; 2013. p. 131–9.
Carter, 2012, Laser powder bed fabrication of nickel-base superalloys: Influence of parameters; characterisation, quantification and mitigation of cracking, Superalloys, 2012, 577, 10.7449/2012/Superalloys_2012_577_586
Kou, 2003
Carter, 2016, Process optimisation of selective laser melting using energy density model for nickel based superalloys, Mater Sci Tech, 32, 657, 10.1179/1743284715Y.0000000108
Zhao, 2009, The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming, Mater Sci Eng A, 504, 129, 10.1016/j.msea.2008.12.024
Lewis, 2000, Practical considerations and capabilities for laser assisted direct metal deposition, Mater Des, 21, 417, 10.1016/S0261-3069(99)00078-3
Mercelis, 2006, Residual stresses in selective laser sintering and selective laser melting, Rapid Prototyp J, 12, 254, 10.1108/13552540610707013
Goldak, 2006
Masubuchi, 1980
Rathbun HJ, Fredette LF, Scott PM, Csontos AA, Rudland DL. NRC welding residual stress validation program international round robin program and findings. In: ASME 2011 Pressure vessels and piping conference; 2011. p. 1539–45.
Qiao DX, Feng ZL, Zhang W, Wang YL, Crooker P. Modeling of weld residual plastic strain and stress in dissimilar metal butt weld in nuclear reactors. Proceedings of the ASME pressure vessels and piping conference - 2013, Vol 6b: Materials and Fabrication; 2014.
Pellereau B, Hurrell P, Gill C, Francis J, Bate S. Phase transformation properties sensitivity study in a ferritic groove weld. In: Proceedings of the ASME pressure vessels and piping conference - 2013, Vol 6b: Materials and Fabrication; 2014.
Labudovic, 2003, A three dimensional model for direct laser metal powder deposition and rapid prototyping, J Mater Sci, 38, 35, 10.1023/A:1021153513925
Smith, 2016, Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support, Comput Mech, 57, 583, 10.1007/s00466-015-1240-4
Lindgren, 2001, Finite element modeling and simulation of welding part 1: increased complexity, J Therm Stresses, 24, 141, 10.1080/01495730150500442
Lindgren L-E. Finite element modeling and simulation of welding. Part 2: improved material modeling. J Therm Stress 2001;24(3):195–231.
Lindgren L-E. Finite element modeling and simulation of welding. Part 3: efficiency and integration. J Therm Stress 2001;24(4):305–34.
De, 2011, A perspective on residual stresses in welding, Sci Technol Weld Join, 16, 204, 10.1179/136217111X12978476537783
Denlinger, 2016, Effect of stress relaxation on distortion in additive manufacturing process modeling, Addit Manuf, 12, 51
Song, 2015, Residual stresses and microstructure in Powder Bed Direct Laser Deposition (PB DLD) samples, IntJ Mater Form, 8, 245, 10.1007/s12289-014-1163-1
Fergani, 2017, Analytical modelling of residual stress in additive manufacturing, Fatigue Fract Eng M, 40, 971, 10.1111/ffe.12560
Alimardani, 2007, A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process, Opt Laser Eng, 45, 1115, 10.1016/j.optlaseng.2007.06.010
Beuth, 2001, The role of process variables in laser-based direct metal solid freeform fabrication, JOM, 53, 36, 10.1007/s11837-001-0067-y
Kahlen, 2001, Residual stresses in laser-deposited metal parts, J Laser Appl, 13, 60, 10.2351/1.1356418
Wang, 2009, Experimental and numerical study of the LENS rapid fabrication process, J Manuf Sci Eng, 131, 10.1115/1.3173952
Wang, 2008, Residual stresses in LENS-deposited AISI 410 stainless steel plates, Mater Sci Eng A, 496, 234, 10.1016/j.msea.2008.05.044
Chew, 2015, Thermo-mechanical model for simulating laser cladding induced residual stresses with single and multiple clad beads, J Mater Process Technol, 224, 89, 10.1016/j.jmatprotec.2015.04.031
Dai, 2001, Thermal and stress modeling of multi-material laser processing, Acta Mater, 49, 4171, 10.1016/S1359-6454(01)00312-3
Ghosh, 2005, Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process, J Laser Appl, 17, 144, 10.2351/1.1961688
Ghosh, 2006, Modeling and experimental verification of transient/residual stresses and microstructure formation in multi-layer laser aided DMD process, J Heat Trans, 128, 662, 10.1115/1.2194037
Ghosh, 2007, Deposition pattern based thermal stresses in single-layer laser aided direct material deposition process, J Manuf Sci Eng, 129, 319, 10.1115/1.2401620
Nie, 2016, Experimental study and modeling of H13 steel deposition using laser hot-wire additive manufacturing, J Mater Process Technol, 235, 171, 10.1016/j.jmatprotec.2016.04.006
Chiumenti, 2010, Finite element modeling of multi-pass welding and shaped metal deposition processes, Comput Method Appl Mech Eng, 199, 2343, 10.1016/j.cma.2010.02.018
Denlinger, 2014, Thermomechanical modeling of additive manufacturing large parts, J Manuf Sci Eng, 136, 10.1115/1.4028669
Kamara, 2011, A numerical investigation into residual stress characteristics in laser deposited multiple layer Waspaloy parts, J Manuf Sci Eng, 133, 10.1115/1.4003833
Marimuthu S, Clark D, Allen J, Kamara A, Mativenga P, Li L, et al. Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component. Proc Inst Mech Eng, Part C: J Mech Eng Sci 2013;1987–99.
Mukherjee, 2017, Mitigation of thermal distortion during additive manufacturing, Scripta Mater, 127, 79, 10.1016/j.scriptamat.2016.09.001
Denlinger, 2015, Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V, Proc Inst Mech Eng Part B-J Eng Manuf, 229, 1803, 10.1177/0954405414539494
Ding, 2014, A computationally efficient finite element model of wire and arc additive manufacture, Int J Adv Manuf Technol, 70, 227, 10.1007/s00170-013-5261-x
Li, 2016, A multiscale modeling approach for fast prediction of part distortion in selective laser melting, J Mater Process Technol, 229, 703, 10.1016/j.jmatprotec.2015.10.022
Yuan, 1996, Prediction of residual stresses in welded T- and I-joints using inherent strains, J Eng Mater, 118, 229
Withers PJ, Bhadeshia HKDH. Residual stress. Part 1 – Measurement techniques. Mater Sci Tech 2001;17(4):355–65.
Attallah, 2016, Additive manufacturing of Ni-based superalloys: the outstanding issues, MRS Bull, 41, 758, 10.1557/mrs.2016.211
Withers, 2008, Recent advances in residual stress measurement, Int J Pres Ves Pip, 85, 118, 10.1016/j.ijpvp.2007.10.007
Liu, 2011, Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy, Opt Laser Technol, 43, 208, 10.1016/j.optlastec.2010.06.015
Lu, 2015, Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy, Opt Laser Technol, 75, 197, 10.1016/j.optlastec.2015.07.009
Griffith, 1999, Understanding thermal behavior in the LENS process, Mater Des, 20, 107, 10.1016/S0261-3069(99)00016-3
Casavola, 2009, Preliminary investigation on distribution of residual stress generated by the selective laser melting process, J Strain Anal Eng, 44, 93, 10.1243/03093247JSA464
Lai YB, Liu WJ, Kong Y, Wang FY, Zhao YH. Influencing factors of residual stress of Ti-6.5Al-1Mo-1V-2Zr alloy by laser rapid forming process. Rare Metal Mat Eng 2013;42(7):1526–30.
Zhang, 2009, Influence of heat treatment on residual stress of Ti-6Al-4V alloy by laser solid forming, Rare Metal Mat Eng, 38, 774
Liu, 2016, A study on the residual stress during selective laser melting (SLM) of metallic powder, Int J Adv Manuf Technol, 87, 647, 10.1007/s00170-016-8466-y
Yadroitsev, 2015, Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting, Virtual Phys Prototyp, 10, 67, 10.1080/17452759.2015.1026045
Brice CA, Hofmeister WH. Determination of bulk residual stresses in electron beam additive-manufactured aluminum. Metall Mater Trans A 2013;44a(11):5147–53.
Cottam, 2014, Characterization of microstructure and residual stress in a 3D H13 tool steel component produced by additive manufacturing, J Mater Res, 29, 1978, 10.1557/jmr.2014.190
Moat, 2011, Residual stresses in laser direct metal deposited Waspaloy, Mater Sci Eng A, 528, 2288, 10.1016/j.msea.2010.12.010
Pratt P, Felicelli SD, Wang L, Hubbard CR. Residual stress measurement of laser-engineered net shaping AISI 410 thin plates using neutron diffraction. Metall Mater Trans A 2008;39a(13):3155–63.
Rangaswamy, 2005, Residual stresses in LENS (R) components using neutron diffraction and contour method, Mater Sci Eng A, 399, 72, 10.1016/j.msea.2005.02.019
Rangaswamy, 2003, Residual stresses in components formed by the laser-engineered net shaping (LENS (R)) process, J Strain Anal Eng, 38, 519, 10.1243/030932403770735881
Vrancken, 2014, Residual stress via the contour method in compact tension specimens produced via selective laser melting, Scripta Mater, 87, 29, 10.1016/j.scriptamat.2014.05.016
Wu AS, Brown DW, Kumar M, Gallegos GF, King WE. An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel. Metall Mater Trans A 2014;45a(13):6260–70.
Zhang, 2011, Improved procedure for computing residual stresses from neutron diffraction data and its application to multipass dissimilar welds, Sci Technol Weld Joi, 16, 254, 10.1179/1362171810Y.0000000023
Tammas-Williams, 2017, Design for additive manufacturing with site-specific properties in metals and alloys, Scripta Mater, 135, 105, 10.1016/j.scriptamat.2016.10.030
Buchbinder, 2014, Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting, J Laser Appl, 26, 012004, 10.2351/1.4828755
Dunbar, 2016, Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process, Addit Manuf, 12, 25
Salvati, 2017, Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade, Comput Method Appl Mech Eng, 320, 335, 10.1016/j.cma.2017.03.005
Gao, 2013, The effect of deposition patterns on the deformation of substrates during direct laser fabrication, Comput Method Appl Mech Eng, 135
Colegrove, 2013, Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling, J Mater Process Technol, 213, 1782, 10.1016/j.jmatprotec.2013.04.012
Martina, 2016, Residual stress of as-deposited and rolled wire plus arc additive manufacturing Ti-6Al-4V components, Mater Sci Tech, 32, 1439, 10.1080/02670836.2016.1142704
Szost, 2016, A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4V components, Mater Des, 89, 559, 10.1016/j.matdes.2015.09.115
Mani M, Lane B, Donmez A, Feng S, Moylan S, Fesperman R. Measurement science needs for real-time control of additive manufacturing powder bed fusion processes. Gaithersburg (MD): National Institute of Standards and Technology [Standard No NISTIR 2015;8036].
Fathi, 2008, Geometry control of the deposited layer in a nonplanar laser cladding process using a variable structure controller, J Manuf Sci Eng, 130, 10.1115/1.2823085
Salehi, 2006, Melt pool temperature control using LabVIEW in Nd: YAG laser blown powder cladding process, Int J Adv Manuf Technol, 29, 273, 10.1007/s00170-005-2514-3
Davis, 2011, Vision-based clad height measurement, Mach Vision Appl, 22, 129, 10.1007/s00138-009-0240-9
Rodriguez, 2015, Approximation of absolute surface temperature measurements of powder bed fusion additive manufacturing technology using in situ infrared thermography, Addit Manuf, 5, 31
Bi, 2013, Study on influential factors for process monitoring and control in laser aided additive manufacturing, J Mater Process Technol, 213, 463, 10.1016/j.jmatprotec.2012.10.006
Islam, 2013, Temperature profile and imaging analysis of laser additive manufacturing of stainless steel, Phys Proc, 41, 835, 10.1016/j.phpro.2013.03.156
Denlinger, 2015, Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys, J Mater Process Technol, 215, 123, 10.1016/j.jmatprotec.2014.07.030
Heigel, 2015, Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti–6Al–4V, Addit Manuf, 5, 9
Barua, 2014, Vision-based defect detection in laser metal deposition process, Rapid Prototyp J, 20, 77, 10.1108/RPJ-04-2012-0036
Tang, 2010, Melt pool temperature control for laser metal deposition processes-Part I: online temperature control, J Manuf Sci Eng, 132
Tang, 2010, Melt pool temperature control for laser metal deposition processes-Part II: layer-to-layer temperature control, J Manuf Sci Eng, 132
Zeinali, 2010, Height control in laser cladding using adaptive sliding mode technique: theory and experiment, J Manuf Sci Eng, 132, 10.1115/1.4002023
Popova, 2017, Process-structure linkages using a data science approach: application to simulated additive manufacturing data, Integ Mater Manuf Innov, 1
Farshidianfar, 2016, Real-time control of microstructure in laser additive manufacturing, Int J Adv Manuf Technol, 82, 1173, 10.1007/s00170-015-7423-5
Nassar, 2015, Intra-layer closed-loop control of build plan during directed energy additive manufacturing of Ti–6Al–4V, Addit Manuf, 6, 39
Lippold, 2014
ASM Handbook. Welding fundamentals and processes. ASM International; 2011.
Rai, 2007, Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium, J Phys D Appl Phys, 40, 5753, 10.1088/0022-3727/40/18/037
Elmer, 2017, Microstructure and mechanical properties of 21-6-9 stainless steel electron beam welds, Metall Mater Trans A, 48, 1771, 10.1007/s11661-017-3996-y
Wei, 2016, Origin of grain orientation during solidification of an aluminum alloy, Acta Mater, 115, 123, 10.1016/j.actamat.2016.05.057
Wei, 2017, Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy, Acta Mater, 126, 413, 10.1016/j.actamat.2016.12.073
Vilar, 2009, Structure of NiCrAlY coatings deposited on single-crystal alloy turbine blade material by laser cladding, Acta Mater, 57, 5292, 10.1016/j.actamat.2009.06.049
Ocelík, 2010, Microstructure and properties of laser clad coatings studied by orientation imaging microscopy, Acta Mater, 58, 6763, 10.1016/j.actamat.2010.09.002
Sun, 2005, Parametric investigation of pulsed Nd: YAG laser cladding of stellite 6 on stainless steel, Surf Coat Technol, 194, 225, 10.1016/j.surfcoat.2004.03.058
Thivillon, 2009, Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components, J Nucl Mater, 385, 236, 10.1016/j.jnucmat.2008.11.023
Pei, 2000, Functionally graded materials produced by laser cladding, Acta Mater, 48, 2617, 10.1016/S1359-6454(00)00065-3
Dinda, 2009, Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability, Mater Sci Eng A, 509, 98, 10.1016/j.msea.2009.01.009
Dinda, 2012, Texture control during laser deposition of nickel-based superalloy, Scripta Mater, 67, 503, 10.1016/j.scriptamat.2012.06.014
Basak, 2016, Epitaxy and microstructure evolution in metal additive manufacturing, Ann Rev Mater Res, 46, 125, 10.1146/annurev-matsci-070115-031728
Das, 2003, Physical aspects of process control in selective laser sintering of metals, Adv Eng Mater, 5, 701, 10.1002/adem.200310099
Rappaz, 1993, Probabilistic modeling of microstructure formation in solidification processes, Acta Metall Mater, 41, 345, 10.1016/0956-7151(93)90065-Z
David, 1989, Correlation between solidification parameters and weld microstructures, Int Mater Rev, 34, 213, 10.1179/imr.1989.34.1.213
Dinda, 2012, Evolution of microstructure in laser deposited Al–11.28%Si alloy, Surf Coat Technol, 206, 2152, 10.1016/j.surfcoat.2011.09.051
Garibaldi, 2016, Metallurgy of high-silicon steel parts produced using Selective Laser Melting, Acta Mater, 110, 207, 10.1016/j.actamat.2016.03.037
Yadollahi, 2015, Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel, Mater Sci Eng A, 644, 171, 10.1016/j.msea.2015.07.056
Thijs, 2013, Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum, Acta Mater, 61, 4657, 10.1016/j.actamat.2013.04.036
Liu, 2015, Effects of processing parameters on crystal growth and microstructure formation in laser powder deposition of single-crystal superalloy, J Mater Process Technol, 216, 19, 10.1016/j.jmatprotec.2014.08.025
Wei HL, Mazumder J, DebRoy T. Evolution of solidification texture during additive manufacturing. Sci Rep 2015;5: Article No. 16446.
Liu, 2015, Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy, Acta Mater, 87, 248, 10.1016/j.actamat.2014.12.046
Liu, 2004, Effects of melt-pool geometry on crystal growth and microstructure development in laser surface-melted superalloy single crystals, Acta Mater, 52, 4833
Carter, 2014, The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy, J Alloy Comp, 615, 338, 10.1016/j.jallcom.2014.06.172
Kurz, 1986, Theory of microstructural development during rapid solidification, Acta Metall, 34, 823, 10.1016/0001-6160(86)90056-8
Kobryn, 2003, Microstructure and texture evolution during solidification processing of Ti–6Al–4V, J Mater Process Technol, 135, 330, 10.1016/S0924-0136(02)00865-8
Blecher, 2014, Solidification map of a nickel-base alloy, Metall Mater Trans A, 45A, 2142, 10.1007/s11661-013-2149-1
Nastac, 2015, Experimental and stochastic modeling of the globular microstructure and the microsegregation evolution during the solidification of magnesium alloys cast at low superheat via containerless melting, J Manuf Sci Prod, 15, 3
Liu, 2005, Effects of substrate crystallographic orientations on crystal growth and microstructure development in laser surface-melted superalloy single crystals. Mathematical modeling of single-crystal growth in a melt pool (Part II), Acta Mater, 53, 1545, 10.1016/j.actamat.2004.12.007
Wang, 2016, Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys: experimental investigation, Acta Mater, 104, 250, 10.1016/j.actamat.2015.11.018
Wang, 2015, Effect of substrate orientation on the columnar-to-equiaxed transition in laser surface remelted single crystal superalloys, Acta Mater, 88, 283, 10.1016/j.actamat.2015.01.063
Acharya, 2015, Additive manufacturing and characterization of René 80 superalloy processed through scanning laser epitaxy for turbine engine hot-section component repair, Adv Eng Mater, 17, 942, 10.1002/adem.201400589
Y-j, 2007, Comparative study of microstructural characteristics of electrospark and Nd:YAG laser epitaxially growing coatings, Appl Surf Sci, 253, 6149, 10.1016/j.apsusc.2007.01.029
Do, 2013, Investigation on multi-track multi-layer epitaxial growth of columnar crystal in direct laser forming, J Laser Appl, 25, 012007, 10.2351/1.4788595
Vilar, 2015, Repair and manufacturing of single crystal Ni-based superalloys components by laser powder deposition—a review, J Laser Appl, 27, S17004, 10.2351/1.4862697
Zhang, 2011, Thermomechanical analysis of multi-bead pulsed laser powder deposition of a nickel-based superalloy, J Mater Process Technol, 211, 1478, 10.1016/j.jmatprotec.2011.03.023
Liang, 2016, Origin of stray-grain formation and epitaxy loss at substrate during laser surface remelting of single-crystal nickel-base superalloys, Mater Des, 102, 297, 10.1016/j.matdes.2016.04.051
Joseph, 2015, Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys, Mater Sci Eng A, 633, 184, 10.1016/j.msea.2015.02.072
Acharya, 2015, Additive manufacturing of IN100 superalloy through scanning laser epitaxy for turbine engine hot-section component repair: process development, modeling, microstructural characterization, and process control, Metall Mater Trans A, 46, 3864, 10.1007/s11661-015-2912-6
Basak, 2016, Additive manufacturing of single-crystal superalloy CMSX-4 through scanning laser epitaxy: computational modeling, experimental process development, and process parameter optimization, Metall Mater Trans A, 47, 3845, 10.1007/s11661-016-3571-y
Liu, 2014, Numerical simulation of transport phenomena for a double-layer laser powder deposition of single-crystal superalloy, Metall Mater Trans A, 45, 1903, 10.1007/s11661-013-2178-9
Ramsperger, 2016, Microstructure of the nickel-base superalloy CMSX-4 fabricated by selective electron beam melting, Metall Mater Trans A, 47, 1469, 10.1007/s11661-015-3300-y
Liu, 2005, Direct laser deposition of a single-crystal Ni3Al-based IC221W alloy, Metall Mater Trans A, 36A, 3397, 10.1007/s11661-005-0013-7
Acharya, 2014, A coupled thermal, fluid flow, and solidification model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (Part I), Metall Mater Trans B, 45, 2247, 10.1007/s11663-014-0117-9
Acharya, 2014, A microstructure evolution model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (part II), Metall Mater Trans B, 45, 2279, 10.1007/s11663-014-0183-z
Anderson, 2010, Origin of stray grain formation in single-crystal superalloy weld pools from heat transfer and fluid flow modeling, Acta Mater, 58, 1441, 10.1016/j.actamat.2009.10.051
Anderson, 2009, Stray grain formation in welds of single-crystal Ni-base superalloy CMSX-4, Metall Mater Trans A, 41, 181, 10.1007/s11661-009-0078-9
Gaumann, 2001, Single-crystal laser deposition of superalloys: processing-microstructure maps, Acta Mater, 49, 1051, 10.1016/S1359-6454(00)00367-0
Gaumann, 1999, Epitaxial laser metal forming: analysis of microstructure formation, Mater Sci Eng A, 271, 232, 10.1016/S0921-5093(99)00202-6
Flemings, 1974
Hunt, 1984, Steady-state columnar and equiaxed growth of dendrites and eutectic, Mater Sci Eng, 65, 75, 10.1016/0025-5416(84)90201-5
Hunziker, 2000, On the formation of a centreline grain boundary during fusion welding, Acta Mater, 48, 4191, 10.1016/S1359-6454(00)00273-1
Tian, 2014, Rationalization of microstructure heterogeneity in Inconel 718 builds made by the direct laser additive manufacturing process, Metall Mater Trans A, 45, 4470, 10.1007/s11661-014-2370-6
Nie, 2014, Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy, Acta Mater, 77, 85, 10.1016/j.actamat.2014.05.039
Liu, 2013, Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction, Opt Laser Technol, 45, 330, 10.1016/j.optlastec.2012.06.028
Parimi LL, A RG, Clark D, Attallah MM. Microstructural and texture development in direct laser fabricated IN718. Mater Charact 2014;89:102–11.
Bermingham, 2015, Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions, Acta Mater, 91, 289, 10.1016/j.actamat.2015.03.035
Lu, 2016, Massive transformation in Ti–6Al–4V additively manufactured by selective electron beam melting, Acta Mater, 104, 303, 10.1016/j.actamat.2015.11.011
Raghavan, 2016, Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing, Acta Mater, 112, 303, 10.1016/j.actamat.2016.03.063
Sridharan, 2016, Rationalization of anisotropic mechanical properties of Al-6061 fabricated using ultrasonic additive manufacturing, Acta Mater, 117, 228, 10.1016/j.actamat.2016.06.048
Tan, 2015, Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting, Acta Mater, 97, 1, 10.1016/j.actamat.2015.06.036
Wang, 2016, Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing, Acta Mater, 110, 226, 10.1016/j.actamat.2016.03.019
Wu, 2016, Microstructure and strength of selectively laser melted AlSi10Mg, Acta Mater, 117, 311, 10.1016/j.actamat.2016.07.012
Xu, 2015, Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition, Acta Mater, 85, 74, 10.1016/j.actamat.2014.11.028
Rai, 2016, A coupled cellular automaton-Lattice Boltzmann model for grain structure simulation during additive manufacturing, Comp Mater Sci, 124, 37, 10.1016/j.commatsci.2016.07.005
Yan, 2012, Microstructure and mechanical properties of laser-MIG hybrid welding of 1420 Al-Li alloy, Int J Adv Manuf Technol, 66, 1467
Chen, 2016, Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling, J Alloy Comp, 670, 312, 10.1016/j.jallcom.2016.01.250
Book, 2016, Evaluation of select surface processing techniques for in situ application during the additive manufacturing build process, JOM, 68, 1780, 10.1007/s11837-016-1897-y
Gong, 2015, Phase-field modeling of microstructure evolution in electron beam additive manufacturing, JOM, 67, 1176, 10.1007/s11837-015-1352-5
Wu, 2016, Microstructural evolution and microhardness of a selective-laser-melted Ti–6Al–4V alloy after post heat treatments, J Alloy Comp, 672, 643, 10.1016/j.jallcom.2016.02.183
Liu, 2016, Control of crystal orientation and continuous growth through inclination of coaxial nozzle in laser powder deposition of single-crystal superalloy, J Mater Process Technol, 230, 177, 10.1016/j.jmatprotec.2015.11.017
Montero Sistiaga, 2016, Changing the alloy composition of Al7075 for better processability by selective laser melting, J Mater Process Technol, 238, 437, 10.1016/j.jmatprotec.2016.08.003
Helmer, 2014, Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: processing window and microstructure, J Mater Res, 29, 1987, 10.1557/jmr.2014.192
Bi, 2014, Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing, Mater Des, 60, 401, 10.1016/j.matdes.2014.04.020
Chen, 2016, Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718, Mater Des, 90, 586, 10.1016/j.matdes.2015.10.155
Liu, 2016, Special zone in multi-layer and multi-pass welded metal and its role in the creep behavior of 9Cr1Mo welded joint, Mater Des, 108, 195, 10.1016/j.matdes.2016.06.102
Zinoviev, 2016, Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method, Mater Des, 106, 321, 10.1016/j.matdes.2016.05.125
Antonysamy, 2013, Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting, Mater Charact, 84, 153, 10.1016/j.matchar.2013.07.012
Donoghue, 2016, The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on beta-grain refinement and texture modification in Ti-6Al-4V, Mater Charact, 114, 103, 10.1016/j.matchar.2016.02.001
de Formanoir, 2016, Electron beam melted Ti–6Al–4V: microstructure, texture and mechanical behavior of the as-built and heat-treated material, Mater Sci Eng A, 652, 105, 10.1016/j.msea.2015.11.052
Helmer, 2016, Grain structure evolution in Inconel 718 during selective electron beam melting, Mater Sci Eng A, 668, 180, 10.1016/j.msea.2016.05.046
Ma, 2015, The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding, Mater Sci Eng A, 631, 230, 10.1016/j.msea.2015.02.051
Vilaro, 2012, Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy, Mater Sci Eng A, 534, 446, 10.1016/j.msea.2011.11.092
Dehoff, 2015, Site specific control of crystallographic grain orientation through electron beam additive manufacturing, Mater Sci Tech, 31, 931, 10.1179/1743284714Y.0000000734
Wang, 2016, Influences of deposition strategies and oblique angle on properties of AISI316L stainless steel oblique thin-walled part by direct laser fabrication, Opt Laser Technol, 80, 138, 10.1016/j.optlastec.2016.01.002
Niendorf, 2013, Highly anisotropic steel processed by selective laser melting, Metall Mater Trans B, 44, 794, 10.1007/s11663-013-9875-z
Kanagarajah, 2013, Inconel 939 processed by selective laser melting: effect of microstructure and temperature on the mechanical properties under static and cyclic loading, Mater Sci Eng A, 588, 188, 10.1016/j.msea.2013.09.025
Kunze, 2015, Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM), Mater Sci Eng A, 620, 213, 10.1016/j.msea.2014.10.003
Dinda, 2012, Microstructural characterization of laser-deposited Al 4047 alloy, Metall Mater Trans A, 44, 2233, 10.1007/s11661-012-1560-3
Bhattacharya, 2011, Microstructural evolution and mechanical, and corrosion property evaluation of Cu–30Ni alloy formed by Direct Metal Deposition process, J Alloy Comp, 509, 6364, 10.1016/j.jallcom.2011.03.091
Thijs, 2013, Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder, Acta Mater, 61, 1809, 10.1016/j.actamat.2012.11.052
Holesinger, 2016, Characterization of an aluminum alloy hemispherical shell fabricated via direct metal laser melting, JOM, 68, 1000, 10.1007/s11837-015-1798-5
Boehm-Courjault, 2009, EBSD: a powerful microstructure analysis technique in the field of solidification, J Microsc-oxford, 233, 160, 10.1111/j.1365-2818.2008.03107.x
Al-Bermani, 2010, The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V, Metall Mater Trans A, 41, 3422, 10.1007/s11661-010-0397-x
Chen, 2016, Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes, Acta Mater, 115, 448, 10.1016/j.actamat.2016.05.011
Murr, 2010, Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting, Acta Mater, 58, 1887, 10.1016/j.actamat.2009.11.032
Cong, 2014, Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy, Int J Adv Manuf Technol, 76, 1593
Sing, 2016, Selective laser melting of titanium alloy with 50wt% tantalum: microstructure and mechanical properties, J Alloy Comp, 660, 461, 10.1016/j.jallcom.2015.11.141
Vrancken, 2012, Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties, J Alloy Comp, 541, 177, 10.1016/j.jallcom.2012.07.022
Zhang, 2016, Influence of solution treatment on microstructure evolution of TC21 titanium alloy with near equiaxed β grains fabricated by laser additive manufacture, J Alloy Comp, 666, 380, 10.1016/j.jallcom.2016.01.065
Zhang, 2016, Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy, J Mater Process Technol, 238, 202, 10.1016/j.jmatprotec.2016.07.011
Gong, 2014, Beam speed effects on Ti–6Al–4V microstructures in electron beam additive manufacturing, J Mater Res, 29, 1951, 10.1557/jmr.2014.125
Zhu, 2015, The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy, Mater Des, 67, 538, 10.1016/j.matdes.2014.11.001
Wang, 2016, Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding, Mater Sci Eng A, 676, 395, 10.1016/j.msea.2016.09.015
Dehoff, 2015, Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718, Mater Sci Tech, 31, 939, 10.1179/1743284714Y.0000000697
Murr, 2011, Microstructural architecture, microstructures, and mechanical properties for a nickel-base superalloy fabricated by electron beam melting, Metall Mater Trans A, 42, 3491, 10.1007/s11661-011-0748-2
Prabhu, 2015, Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V, Sci Technol Weld Join, 20, 659, 10.1179/1362171815Y.0000000050
Schempp, 2015, Understanding grain refinement in aluminium welding, Weld World, 59, 767, 10.1007/s40194-015-0251-2
Vrancken, 2014, Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting, Acta Mater, 68, 150, 10.1016/j.actamat.2014.01.018
Bermingham, 2008, Grain-refinement mechanisms in titanium alloys, J Mater Res, 23, 97, 10.1557/JMR.2008.0002
Sistla H, Newkirk JW, Liou FF, Tms. Microstructural characterization and mechanical properties of laser deposited high entropy alloys. In: Tms 2014 supplemental proceedings; 2014. p. 1087–92.
Wu, 2016, Weldability of a high entropy CrMnFeCoNi alloy, Scripta Mater, 124, 81, 10.1016/j.scriptamat.2016.06.046
Martina, 2015, Microstructure of interpass rolled wire + arc additive manufacturing Ti-6Al-4V components, Metall Mater Trans A, 46, 6103, 10.1007/s11661-015-3172-1
Ruttert, 2016, Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting, Mater Des, 110, 720, 10.1016/j.matdes.2016.08.041
Song, 2014, Vacuum heat treatment of iron parts produced by selective laser melting: microstructure, residual stress and tensile behavior, Mater Des, 54, 727, 10.1016/j.matdes.2013.08.085
Brandl, 2012, Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments, Mater Lett, 81, 84, 10.1016/j.matlet.2012.04.116
Amato, 2012, Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting, Acta Mater, 60, 2229, 10.1016/j.actamat.2011.12.032
Cao, 2013, Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy, Opt Laser Technol, 45, 228, 10.1016/j.optlastec.2012.06.043
Strößner, 2015, Mechanical and microstructural investigation of nickel-based superalloy IN718 manufactured by selective laser melting (SLM), Adv Eng Mater, 17, 1099, 10.1002/adem.201500158
Li, 2016, Effect of laser scanning speed on a Ti-45Al-2Cr-5Nb alloy processed by selective laser melting: Microstructure, phase and mechanical properties, J Alloy Comp, 688, 626, 10.1016/j.jallcom.2016.07.206
Vastola, 2016, Modeling the microstructure evolution during additive manufacturing of Ti6Al4V: a comparison between electron beam melting and selective laser melting, JOM, 68, 1370, 10.1007/s11837-016-1890-5
Guo, 2015, Effects of scanning parameters on material deposition during electron beam selective melting of Ti-6Al-4V powder, J Mater Process Technol, 217, 148, 10.1016/j.jmatprotec.2014.11.010
Simonelli, 2014, The formation of α + β microstructure in as-fabricated selective laser melting of Ti–6Al–4V, J Mater Res, 29, 2028, 10.1557/jmr.2014.166
Fischer, 2016, In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders, Mater Sci Eng C, 62, 852, 10.1016/j.msec.2016.02.033
Kang, 2017, On the texture, phase and tensile properties of commercially pure Ti produced via selective laser melting assisted by static magnetic field, Mater Sci Eng C, 70, 405, 10.1016/j.msec.2016.09.011
Cloots, 2016, Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles, Mater Des, 89, 770, 10.1016/j.matdes.2015.10.027
Guo, 2016, Rapid fabrication of Nb-Si based alloy by selective laser melting: microstructure, hardness and initial oxidation behavior, Mater Des, 109, 37, 10.1016/j.matdes.2016.07.048
Song, 2014, Fabrication of NiCr alloy parts by selective laser melting: columnar microstructure and anisotropic mechanical behavior, Mater Des, 53, 1, 10.1016/j.matdes.2013.07.010
Tradowsky, 2016, Selective laser melting of AlSi10Mg: influence of post-processing on the microstructural and tensile properties development, Mater Des, 105, 212, 10.1016/j.matdes.2016.05.066
Yang, 2016, Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting, Mater Des, 108, 308, 10.1016/j.matdes.2016.06.117
Bormann, 2014, Microstructure of selective laser melted nickel–titanium, Mater Charact, 94, 189, 10.1016/j.matchar.2014.05.017
Divya, 2016, Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment, Mater Charact, 114, 62, 10.1016/j.matchar.2016.02.004
Li, 2016, Crystal orientation, crystallographic texture and phase evolution in the Ti–45Al–2Cr–5Nb alloy processed by selective laser melting, Mater Charact, 113, 125, 10.1016/j.matchar.2016.01.012
Tammas-Williams, 2015, XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting, Mater Charact, 102, 47, 10.1016/j.matchar.2015.02.008
Chlebus, 2015, Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting, Mater Sci Eng A, 639, 647, 10.1016/j.msea.2015.05.035
Cloots, 2016, Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting, Mater Sci Eng A, 658, 68, 10.1016/j.msea.2016.01.058
Dadbakhsh, 2016, Texture and anisotropy in selective laser melting of NiTi alloy, Mater Sci Eng A, 650, 225, 10.1016/j.msea.2015.10.032
Muñoz-Moreno, 2016, Effect of heat treatment on the microstructure, texture and elastic anisotropy of the nickel-based superalloy CM247LC processed by selective laser melting, Mater Sci Eng A, 674, 529, 10.1016/j.msea.2016.06.075
Simonelli, 2014, On the texture formation of selective laser melted Ti-6Al-4V, Metall Mater Trans A, 45, 2863, 10.1007/s11661-014-2218-0
Vilaro, 2011, As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall Mater Trans A, 42, 3190, 10.1007/s11661-011-0731-y
Buchbinder, 2015, Selective laser melting of aluminum die-cast alloy—correlations between process parameters, solidification conditions, and resulting mechanical properties, J Laser Appl, 27, S29205, 10.2351/1.4906389
Townsend, 2016, Surface texture metrology for metal additive manufacturing: a review, Precis Eng, 46, 34, 10.1016/j.precisioneng.2016.06.001
Moat, 2009, Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy, Acta Mater, 57, 1220, 10.1016/j.actamat.2008.11.004
Bhattacharya, 2014, A comparative study of microstructure and mechanical behavior of CO2 and diode laser deposited Cu-38Ni alloy, J Mater Sci, 49, 2415, 10.1007/s10853-013-7883-7
Ding, 2016, Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys, MRS Bull, 41, 745, 10.1557/mrs.2016.214
Bartkowiak, 2011, New developments of laser processing aluminium alloys via additive manufacturing technique, Phys Proc, 12, 393, 10.1016/j.phpro.2011.03.050
Simonelli, 2014, Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V, Mater Sci Eng A, 616, 1, 10.1016/j.msea.2014.07.086
Jägle, 2014, Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting, J Mater Res, 29, 2072, 10.1557/jmr.2014.204
Murr, 2012, Metal fabrication by additive manufacturing using laser and electron beam melting technologies, J Mater Sci Technol, 28, 1, 10.1016/S1005-0302(12)60016-4
Mazumder, 1997, The direct metal deposition of H13 tool steel for 3-D components, JOM, 49, 55, 10.1007/BF02914687
Elmer, 2008, A new path forward for understanding microstructural evolution during welding, Weld J, 87, 149s
Elmer, 2008, Time resolved X-ray diffraction observations of phase transformations in transient arc welds, Sci Technol Weld Join, 13, 265, 10.1179/174329307X251907
Elmer, 2006, In-situ phase mapping and direct observations of phase transformations during arc welding of 1045 steel, Metall Mater Trans A, 37, 2171, 10.1007/BF02586137
Babu S, Elmer JW, David S, Quintana M. In situ observations of non–equilibrium austenite formation during weld solidification of an Fe–C–Al–Mn low–alloy steel. Proc R Soc Lond A: Math, Phys Eng Sci 2002;458(2020):811–21.
Mayr, 2010, Formation of delta ferrite in 9 Wt pct Cr steel investigated by in-situ X-ray diffraction using synchrotron radiation, Metall Mater Trans A, 41, 2462, 10.1007/s11661-010-0371-7
Kenel, 2016, In situ synchrotron X-ray diffraction and small angle X-ray scattering studies on rapidly heated and cooled Ti-Al and Al-Cu-Mg alloys using laser-based heating, JOM, 68, 978, 10.1007/s11837-015-1774-0
Kenel, 2016, Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti-48Al under additive manufacturing conditions, Scripta Mater, 114, 117, 10.1016/j.scriptamat.2015.12.009
Cakmak, 2016, Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting, Acta Mater, 108, 161, 10.1016/j.actamat.2016.02.005
Murr, 2013, Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting, Acta Mater, 61, 4289, 10.1016/j.actamat.2013.04.002
Li, 2010, Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene′41 by laser melting deposition manufacturing, Mater Sci Eng A, 527, 4823, 10.1016/j.msea.2010.04.062
Zhang, 2013, Oxide films in laser additive manufactured Inconel 718, Acta Mater, 61, 6562, 10.1016/j.actamat.2013.07.039
Clark, 2008, Shaped metal deposition of a nickel alloy for aero engine applications, J Mater Process Technol, 203, 439, 10.1016/j.jmatprotec.2007.10.051
Xiao, 2017, Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy, Mater Lett, 188, 260, 10.1016/j.matlet.2016.10.118
Manikandan, 2014, Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone, J Mater Process Technol, 214, 358, 10.1016/j.jmatprotec.2013.09.006
Rombouts, 2012, Laser metal deposition of Inconel 625: microstructure and mechanical properties, J Laser Appl, 24, 052007, 10.2351/1.4757717
Song H. Multi-scale microstructure characterization for improved understanding of microstructure-property relationship in additive manufacturing [PhD Thesis]. The Ohio State University; 2016.
Sridharan, 2016, Texture evolution during laser direct metal deposition of Ti-6Al-4V, JOM, 68, 772, 10.1007/s11837-015-1797-6
Aboulkhair, 2015, On the precipitation hardening of selective laser melted AlSi10Mg, Metall Mater Trans A, 46, 3337, 10.1007/s11661-015-2980-7
Trelewicz, 2016, Microstructure and corrosion resistance of laser additively manufactured 316L stainless steel, JOM, 68, 850, 10.1007/s11837-016-1822-4
Manvatkar, 2011, Estimation of melt pool dimensions, thermal cycle, and hardness distribution in the laser-engineered net shaping process of austenitic stainless steel, Metall Mater Trans A, 42, 4080, 10.1007/s11661-011-0787-8
Zheng B, Zhou Y, Smugeresky JE, Schoenung JM, Lavernia EJ. Thermal behavior and microstructure evolution during laser deposition with laser-engineered net shaping: Part II. Experimental investigation and discussion. Metall Mater Trans A 2008;39(9):2237–45.
Lin, 2012, Microstructure and mechanical properties of laser forming repaired 17–4PH stainless steel, Mater Sci Eng A, 553, 80, 10.1016/j.msea.2012.05.095
Cherry, 2014, Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting, Int J Adv Manuf Technol, 76, 869
Sun, 2016, Selective laser melting of stainless steel 316L with low porosity and high build rates, Mater Des, 104, 197, 10.1016/j.matdes.2016.05.035
304/304L stainless steel product data bulletin. AK Steel Corporation; 2013 <http://www.aksteel.com/pdf/markets_products/stainless/austenitic/304_304L_data_bulletin.pdf>.
Stainless steel 316/316L product data bulletin. AK Steel Corporation; 2013 <http://www.aksteel.com/pdf/markets_products/stainless/austenitic/316_316L_Stainless_Steel_PDB_201512.pdf>.
Zhang, 2014, Characterization of stainless steel parts by laser metal deposition shaping, Mater Des, 55, 104, 10.1016/j.matdes.2013.09.006
Ziętala, 2016, The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping, Mater Sci Eng A, 677, 1, 10.1016/j.msea.2016.09.028
Ma, 2013, Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L stainless steel, Opt Laser Technol, 45, 209, 10.1016/j.optlastec.2012.07.002
Mertens, 2014, Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures, Powder Metall, 57, 184, 10.1179/1743290114Y.0000000092
Mertens A, Reginster S, Contrepois Q, Dormal T, Lemaire O, Lecomte-Beckers J. Microstructures and mechanical properties of stainless steel AISI 316L processed by selective laser melting. Mater Sci Forum 2014;898–903.
Modest, 2001
Guan, 2013, Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel, Mater Des, 50, 581, 10.1016/j.matdes.2013.03.056
Tolosa, 2010, Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting“, following different manufacturing strategies, Int J Adv Manuf Technol, 51, 639, 10.1007/s00170-010-2631-5
Rottger, 2016, Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material, Mater Sci Eng A, 678, 365, 10.1016/j.msea.2016.10.012
Spierings, 2013, Fatigue performance of additive manufactured metallic parts, Rapid Prototyp J, 19, 88, 10.1108/13552541311302932
Li, 2016, Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing, Mater Sci Tech, 32, 1223, 10.1080/02670836.2015.1114774
Rafi, 2014, Microstructure and mechanical behavior of 17–4 precipitation hardenable steel processed by selective laser melting, J Mater Eng Perform, 23, 4421, 10.1007/s11665-014-1226-y
Murr, 2012, Microstructures and properties of 17–4 PH stainless steel fabricated by selective laser melting, J Mater Res Technol, 1, 167, 10.1016/S2238-7854(12)70029-7
LeBrun, 2015, Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel, Mater Des, 81, 44, 10.1016/j.matdes.2015.05.026
Rafi, 2013, A comparison of the tensile, fatigue, and fracture behavior of Ti-6Al-4V and 15–5 PH stainless steel parts made by selective laser melting, Int J Adv Manuf Technol, 69, 1299, 10.1007/s00170-013-5106-7
Yadollahi A, Shamsaei N, Thompson SM, Elwany A, Bian LK, Asme. Mechanical and microstructural properties of selective laser melted 17–4 PH stainless steel. In: Proceedings of the ASME international mechanical engineering congress and exposition. New York; 2015.
Ning, 2016, Microstructures and mechanical properties of Fe-Cr stainless steel parts fabricated by ultrasonic vibration-assisted laser engineered net shaping process, Mater Lett, 179, 61, 10.1016/j.matlet.2016.05.055
Donachie, 2002
Zhao, 2008, Study on microstructure and mechanical properties of laser rapid forming Inconel 718, Mater Sci Eng A, 478, 119, 10.1016/j.msea.2007.05.079
Amato, 2012, Comparison of microstructures and properties for a Ni-base superalloy (Alloy 625) fabricated by electron beam melting, J Mater Sci Res, 1, 3
Qiu, 2016, Selective laser melting of Invar 36: microstructure and properties, Acta Mater, 103, 382, 10.1016/j.actamat.2015.10.020
Bauer T, Dawson K, Spierings A, Wegener K. Microstructure and mechanical characterisation of SLM processed Haynes® 230®. In: Solid freeform symposium; 2015.
Baufeld, 2012, Mechanical properties of Inconel 718 parts manufactured by shaped metal deposition (SMD), J Mater Eng Perform, 21, 1416, 10.1007/s11665-011-0009-y
Bird RK, Hibberd J. Tensile properties and microstructure of Inconel 718 fabricated with electron beam freeform fabrication (EBF3). Hampton (VA, USA); 2009.
Yadroitsev, 2007, Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder, Appl Surf Sci, 254, 980, 10.1016/j.apsusc.2007.08.046
Blackwell, 2005, The mechanical and microstructural characteristics of laser-deposited IN718, J Mater Process Technol, 170, 240, 10.1016/j.jmatprotec.2005.05.005
Zhang, 2008, Effect of nickel equivalent on hydrogen gas embrittlement of austenitic stainless steels based on type 316 at low temperatures, Acta Mater, 56, 3414, 10.1016/j.actamat.2008.03.022
Zuback JS, DebRoy T. Unpublished research; 2017.
Paul, 2006, Laser rapid manufacturing of Colmonoy-6 components, Opt Laser Eng, 44, 1096, 10.1016/j.optlaseng.2005.08.005
Paul, 2007, Investigating laser rapid manufacturing for Inconel-625 components, Opt Laser Technol, 39, 800, 10.1016/j.optlastec.2006.01.008
Sexton, 2002, Laser cladding of aerospace materials, J Mater Process Technol, 122, 63, 10.1016/S0924-0136(01)01121-9
Wang, 2012, The microstructure and mechanical properties of deposited-IN718 by selective laser melting, J Alloy Comp, 513, 518, 10.1016/j.jallcom.2011.10.107
Abe, 2001, The manufacturing of hard tools from metallic powders by selective laser melting, J Mater Process Technol, 111, 210, 10.1016/S0924-0136(01)00522-2
Zhong M, Yang L, Liu W, Huang T, He J. Laser rapid manufacturing of special pattern Inco 718 nickel-based alloy component. In: Photonics Asia 2004; 2005. p. 59–66.
Li, 2012, Effect of heat treatment on microstructure and mechanical properties of laser melting deposited Ni-base superalloy Rene′41, Mater Sci Eng A, 550, 97, 10.1016/j.msea.2012.04.037
Harrison, 2015, Reduction of micro-cracking in nickel superalloys processed by selective laser melting: a fundamental alloy design approach, Acta Mater, 94, 59, 10.1016/j.actamat.2015.04.035
Wang X, Chou YK. A method to estimate residual stress in metal parts made by Selective Laser Melting. In: ASME 2015 international mechanical engineering congress and exposition; 2015. p. V02AT02A015–V02AT02A015.
Zhang, 2007, Characteristics of laser aided direct metal powder deposition process for nickel-based superalloy, Mater Sci Forum, 534–536, 457, 10.4028/www.scientific.net/MSF.534-536.457
Zhao, 2016, Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting, Mater Des, 95, 21, 10.1016/j.matdes.2015.12.135
Hrabe, 2013, Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), Part 2: energy input, orientation, and location, Mater Sci Eng A, 573, 271, 10.1016/j.msea.2013.02.065
Galarraga, 2016, Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM), Addit Manuf, 10, 47
Shunmugavel, 2015, Microstructure and mechanical properties of wrought and additive manufactured Ti-6Al-4V cylindrical bars, Proc Technol, 20, 231, 10.1016/j.protcy.2015.07.037
Edwards, 2013, Electron beam additive manufacturing of titanium components: properties and performance, J Manuf Sci Eng, 135, 10.1115/1.4025773
Zhai, 2015, Microstructure evolution, tensile properties, and fatigue damage mechanisms in Ti-6Al-4V alloys fabricated by two additive manufacturing techniques, Proc Eng, 114, 658, 10.1016/j.proeng.2015.08.007
Akerfeldt, 2016, Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V, Mater Sci Eng A, 674, 428, 10.1016/j.msea.2016.07.038
Palanivel, 2016, Spatially dependent properties in a laser additive manufactured Ti-6Al-4V component, Mater Sci Eng A, 654, 39, 10.1016/j.msea.2015.12.021
Zhang, 2001, Laser-deposited advanced materials, J Adv Mater, 33, 17
Yu, 2012, Material properties of Ti6Al4V parts produced by laser metal deposition, Phys Proc, 39, 416, 10.1016/j.phpro.2012.10.056
Qiu, 2015, Fabrication of large Ti-6Al-4V structures by direct laser deposition, J Alloy Comp, 629, 351, 10.1016/j.jallcom.2014.12.234
Zhang, 2009, Heat-treated microstructure and mechanical properties of laser solid forming Ti-6Al-4V alloy, Rare Met, 28, 537, 10.1007/s12598-009-0104-5
Dinda, 2008, Fabrication of Ti-6Al-4V scaffolds by direct metal deposition, Metall Mater Trans A, 39A, 2914, 10.1007/s11661-008-9634-y
Alcisto, 2011, Tensile properties and microstructures of laser-formed Ti-6Al-4V, J Mater Eng Perform, 20, 203, 10.1007/s11665-010-9670-9
Keicher, 1998, LENSTM moves beyond RP to direct fabrication, Met Powder Rep, 12, 26
Optomec LENS materials. Optomec, Inc.; 2016 <http://www.optomec.com/3d-printed-metals/lens-materials/>.
Edwards, 2014, Fatigue performance evaluation of selective laser melted Ti-6Al-4V, Mater Sci Eng A, 598, 327, 10.1016/j.msea.2014.01.041
Vandenbroucke, 2007, Selective laser melting of biocompatible metals for rapid manufacturing of medical parts, Rapid Prototyp J, 13, 196, 10.1108/13552540710776142
Facchini, 2010, Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders, Rapid Prototyp J, 16, 450, 10.1108/13552541011083371
Hollander, 2006, Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming, Biomaterials, 27, 955, 10.1016/j.biomaterials.2005.07.041
Kasperovich, 2015, Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting, J Mater Process Technol, 220, 202, 10.1016/j.jmatprotec.2015.01.025
Leuders, 2013, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance, Int J Fatigue, 48, 300, 10.1016/j.ijfatigue.2012.11.011
Murr, 2009, Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications, J Mech Behav Biomed, 2, 20, 10.1016/j.jmbbm.2008.05.004
Qiu, 2013, Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V, Mater Sci Eng A, 578, 230, 10.1016/j.msea.2013.04.099
Rafi, 2013, Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting, J Mater Eng Perform, 22, 3872, 10.1007/s11665-013-0658-0
Ramosoeu M, Booysen G, Ngonda T, Chikwanda H. Mechanical properties of direct laser sintered Ti-6Al-V4. In: Materials science and technology conference (MS&T). Columbus (OH); 2011. p. 1460–8.
Systems EG-EO. Material data sheet - EOS Titanium Ti64. EOS: Munchen (Germany); 2011.
Kobryn P, Semiatin S. Mechanical properties of laser-deposited Ti-6Al-4V. In: Solid freeform fabrication proceedings; 2001. p. 6–8.
Amsterdam E, Kool G. High cycle fatigue of laser beam deposited Ti-6Al-4V and Inconel 718. In: ICAF 2009, Bridging the gap between theory and operational practice. Rotterdam (The Netherlands); 2009. p. 1261–74.
Arcella, 2000, Producing titanium aerospace components from powder using laser forming, JOM, 52, 28, 10.1007/s11837-000-0028-x
Griffith ML, Ensz MT, Puskar JD, Robino CV, Brooks JA, Philliber JA, et al. Understanding the microstructure and properties of components fabricated by laser engineered net shaping (LENS). In: MRS proceedings; 2000. p. 9.
Leuders, 2014, On the fatigue properties of metals manufactured by selective laser melting–the role of ductility, J Mater Res, 29, 1911, 10.1557/jmr.2014.157
Koike, 2011, Evaluation of titanium alloys fabricated using rapid prototyping technologies—electron beam melting and laser beam melting, Materials, 4, 1776, 10.3390/ma4101776
Brandl E, Leyens C, Palm F. Mechanical properties of additive manufactured Ti-6Al-4V using wire and powder based processes. In: IOP conference series: materials science and engineering; 2011. p. 012004.
Brandl, 2010, Additive manufactured Ti-6Al-4V using welding wire: Comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications, Phys Proc, 5, 595, 10.1016/j.phpro.2010.08.087
Yao, 2015, Microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser micro cladding deposition, Rare Met, 34, 445, 10.1007/s12598-015-0461-1
Edwards, 2015, Effect of build direction on the fracture toughness and fatigue crack growth in selective laser melted Ti-6Al-4V, Fatigue Fract Eng M, 38, 1228, 10.1111/ffe.12303
Kempen, 2012, Mechanical properties of AlSi10Mg produced by selective laser melting, Phys Proc, 39, 439, 10.1016/j.phpro.2012.10.059
Tang, 2017, Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting, Int J Fatigue, 94, 192, 10.1016/j.ijfatigue.2016.06.002
Read, 2015, Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development, Mater Des, 65, 417, 10.1016/j.matdes.2014.09.044
Bauer DM, Dietrich K, Walter M, Foret P, Palm F, Witt G. Effect of process gas and powder quality on aluminum alloys processed by laser based powder bed melting process. In: Proceedings of international solid freeform fabrication symposium; 2016. p. 419–25.
Fulcher BA, Leigh DK, Watt TJ. Comparison of AlSi10Mg and Al 6061 processed through DMLS. In: Proceedings of the solid freeform fabrication (SFF) symposium. Austin (TX, USA); 2014.
Ng, 2011, Microstructure and mechanical properties of selective laser melted magnesium, Appl Surf Sci, 257, 7447, 10.1016/j.apsusc.2011.03.004
Zhang, 2012, Effects of processing parameters on properties of selective laser melting Mg-9%Al powder mixture, Mater Des, 34, 753, 10.1016/j.matdes.2011.06.061
Sing, 2015, Interfacial characterization of SLM parts in multi-material processing: Intermetallic phase formation between AlSi10Mg and C18400 copper alloy, Mater Charact, 107, 220, 10.1016/j.matchar.2015.07.007
Greitemeier, 2017, Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting, Int J Fatigue, 94, 211, 10.1016/j.ijfatigue.2016.05.001
Johnson AS, Shuai S, Shamsaei N, Thompson SM, Bian L. Fatigue behavior and failure mechanisms of direct laser deposited Inconel 718. In: Solid freeform fabrication 2016: proceedings of the 26th annual international solid freeform fabrication symposium-an additive manufacturing conference; 2016. p. 499–511.
Sterling, 2016, Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V, Mater Sci Eng A, 655, 100, 10.1016/j.msea.2015.12.026
Ma, 2010, Fatigue and fracture behavior of nickel-based superalloy Inconel 718 up to the very high cycle regime, J Zhejiang Univ-Sci A, 11, 727, 10.1631/jzus.A1000171
Fatemi, 2017, Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect, Int J Fatigue, 100, 347, 10.1016/j.ijfatigue.2017.03.044
Yadollahi, 2017, Additive manufacturing of fatigue resistant materials: challenges and opportunities, Int J Fatigue, 98, 14, 10.1016/j.ijfatigue.2017.01.001
Siddique, 2015, Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting, J Mater Process Technol, 221, 205, 10.1016/j.jmatprotec.2015.02.023
Maskery I, Aboulkhair N, Tuck C, Wildman R, Ashcroft I, Everitt N, et al. Fatigue performance enhancement of selectively laser melted aluminium alloy by heat treatment. In: 26th Annual international solid freeform fabrication symposium. Austin (TX, USA); 2015. p. 1017–25.
Riemer, 2014, On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting, Eng Fract Mech, 120, 15, 10.1016/j.engfracmech.2014.03.008
Brandl, 2012, Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior, Mater Des, 34, 159, 10.1016/j.matdes.2011.07.067
Li P, Warner D, Fatemi A, Phan ND. On the fatigue performance of additively manufactured Ti-6Al-4V to enable rapid qualification for aerospace applications. In: 57th AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials conference; 2016. p. 1656.
Kuo, 2017, Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing, Scripta Mater, 129, 74, 10.1016/j.scriptamat.2016.10.035
Pröbstle, 2016, Superior creep strength of a nickel-based superalloy produced by selective laser melting, Mater Sci Eng A, 674, 299, 10.1016/j.msea.2016.07.061
Song H. Multi-scale microstructure characterization for improved understanding of microstructure-property relationship in additive manufacturing. The Ohio State University; 2016.
Chen, 1997, Dependence of creep fracture of Inconel 718 on grain boundary precipitates, Acta Mater, 45, 2735, 10.1016/S1359-6454(96)00399-0
Rickenbacher, 2013, High temperature material properties of IN738LC processed by selective laser melting (SLM) technology, Rapid Prototyp J, 19, 282, 10.1108/13552541311323281
Kunze, 2015, Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM), Mater Sci Eng A-Struct Mater Prop Microstruct Process, 620, 213, 10.1016/j.msea.2014.10.003
Sun, 2015, Phase and grain size inhomogeneity and their influences on creep behavior of Co–Cr–Mo alloy additive manufactured by electron beam melting, Acta Mater, 86, 305, 10.1016/j.actamat.2014.11.012
Cooper, 2015, Sintering and additive manufacturing: the new paradigm for the jewellery manufacturer, Johnson Matthey Technol Rev, 59, 233, 10.1595/205651315X688523
Milewski JO, Dan JT, Gary KL. Directed light fabrication of rhenium components. In: International symposium on rhenium and rhenium alloys. Orlando (FL): TMS; 1997.
Lewis G, Thoma D, Nemec R, Milewski J. Directed light fabrication of refractory metals. In: International conference on powder metallurgy and particulate materials. Chicago (IL, USA); 1997.
Leonhardt TA. Spherical rhenium powder. US Patent 2003; No. 6551377.
Gu, 2016, Selective laser melting additive manufacturing of hard-to-process tungsten-based alloy parts with novel crystalline growth morphology and enhanced performance, J Manuf Sci Eng, 138, 10.1115/1.4032192
Zhou, 2015, Balling phenomena in selective laser melted tungsten, J Mater Process Technol, 222, 33, 10.1016/j.jmatprotec.2015.02.032
Balla, 2010, Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties, Acta Biomater, 6, 3349, 10.1016/j.actbio.2010.01.046
Fox, 2008, Interface interactions between porous titanium/tantalum coatings, produced by Selective Laser Melting (SLM), on a cobalt–chromium alloy, Surf Coat Technol, 202, 5001, 10.1016/j.surfcoat.2008.05.003
Wauthle, 2015, Additively manufactured porous tantalum implants, Acta Biomater, 14, 217, 10.1016/j.actbio.2014.12.003
Martinez, 2013, Microstructures of niobium components fabricated by electron beam melting, Metall Microstruct Anal, 2, 183, 10.1007/s13632-013-0073-9
Terrazas, 2016, Fabrication and characterization of high-purity niobium using electron beam melting additive manufacturing technology, Int J Adv Manuf Technol, 84, 1115
Faidel, 2015, Investigation of the selective laser melting process with molybdenum powder, Addit Manuf, 8, 88
Wadsworth, 1983, The microstructure and mechanical properties of a welded molybdenum alloy, Mater Sci Eng, 59, 257, 10.1016/0025-5416(83)90173-8
Khan M, Dickens P. Processing parameters for Selective Laser Melting (SLM) of gold. In: Proceedings of solid freeform fabrication symposium; 2008. p. 278–89.
Zito D, Carlotto A, Loggi A, Sbornicchia P, Maggian D, SpA P, et al. Optimization of SLM technology main parameters in the production of gold and platinum jewelry. In: The Santa Fe symposium on jewelry manufacturing technology; 2014. p. 439–70.
Zito D, Carlotto A, Loggi A, Sbornicchia P, Bruttomesso D, Rappo S, et al. Definition and solidity of gold and platinum jewelry produced using selective laser melting (SLM™) technology. In: The Santa Fe symposium on jewelry manufacturing technology; 2015. p. 455–92.
Cohen A. MICA freeform vs selective laser melting. Microfabrica; 2016 <http://www.microfabrica.com/downloads/MIC-WhitePaper-2014.pdf>.
Ge W, Lin F, Guo C. Functional gradient material of Ti-6Al-4V and (alpha)-TiAl fabricated by electron beam selective melting. In: Solid freeform fabrication symposium; 2015. p. 12.
Wang, 2007, Production of functionally-graded samples using simultaneous powder and wire-feed, 539, 3631
Ren, 2014, Microstructure and mechanical properties of a graded structural material, Mater Sci Eng A, 611, 362, 10.1016/j.msea.2014.06.016
Akinlabi ET, Akinlabi SA. Characterization of functionally graded commercially pure titanium (CPTI) and titanium carbide (TiC) powders. In: Proceedings of the world congress on engineering; 2015. p. 1–3.
Liang, 2014, Microstructure and mechanical behavior of commercial purity Ti/Ti-6Al-2Zr-1Mo-1V structurally graded material fabricated by laser additive manufacturing, Scripta Mater, 74, 80, 10.1016/j.scriptamat.2013.11.002
Järvinen, 2014, Characterization of effect of support structures in laser additive manufacturing of stainless steel, Phys Proc, 56, 72, 10.1016/j.phpro.2014.08.099
Pulugurtha SR, Newkirk J, Liou F, Chou H-N. Functionally graded materials by laser metal deposition (reprint). Missouri University of Science and Technology Rolla; 2010. p. 1–31.
Reichardt, 2016, Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing, Mater Des, 104, 404, 10.1016/j.matdes.2016.05.016
Hofmann DC, Roberts S, Otis R, Kolodziejska J, Dillon RP, Suh JO, et al. Developing gradient metal alloys through radial deposition additive manufacturing. Sci Rep 2014;4: Article No. 5357.
Liu, 2003, Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping, Scripta Mater, 48, 1337, 10.1016/S1359-6462(03)00020-4
Fessler J, Nickel A, Link G, Prinz F, Fussell P. Functional gradient metallic prototypes through shape deposition manufacturing. In: Proceedings of the solid freeform fabrication symposium. Austin (TX): University of Texas at Austin; 1997. p. 521–8.
Carroll, 2016, Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling, Acta Mater, 108, 46, 10.1016/j.actamat.2016.02.019
Kahlen, 2000, Hardness, chemical, and microstructural studies for laser-fabricated metal parts of graded materials, J Laser Appl, 12, 205, 10.2351/1.1309552
Articek, 2013, Synthesis of functionally graded material H13/Cu by LENS technology, Adv Product Eng Manage, 8, 169, 10.14743/apem2013.3.164
Hofmann, 2014, Compositionally graded metals: a new frontier of additive manufacturing, J Mater Res, 29, 1899, 10.1557/jmr.2014.208
Gao, 2012, Dissimilar welding of titanium alloys to steels, Trans JWRI, 41, 7
Kundu, 2011, Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti-6Al-4V alloy to micro-duplex stainless steel, Mater Sci Eng A, 528, 4910, 10.1016/j.msea.2011.02.050
Dey, 2009, Joining of titanium to 304L stainless steel by friction welding, J Mater Process Technol, 209, 5862, 10.1016/j.jmatprotec.2009.06.018
American welding society. AWS <http://www.aws.org/about> [browsed January 2017].
Standard welding terms and definitions, AWS 3.0:89. American Welding Society; 1989.
Welding Handbook. Materials and applications, part 1, 9th ed. Miami (FL): American Welding Society; 2010.
Elmer JW, Teruya A. An enhanced Faraday cup for rapid determination of power density distribution in electron beams. Weld J 2001;80(12):288-s.
Arata, 1986
Dong, 2000, Welding residual stresses and effects on fracture in pressure vessel and piping components: a millennium review and beyond, J Press Vess, 122, 329, 10.1115/1.556189
ASM Handbook. Welding, brazing and soldering. ASM International; 1993.
Eagar, 1983, Temperature fields produced by traveling distributed heat sources, Weld J, 62, 346
Rai, 2009, Heat transfer and fluid flow during electron beam welding of 304L stainless steel alloy, Weld J, 88, 54s
Goldak J, Asadi M. Computational weld mechanics and optimization of welding procedures, welds and welded structures. Trans JWRI, Special Issue on WSE2011 2011:55–60.
Goldak, 2005, Computer simulation of welding processes, Comput Weld Mech, 16
Wei, 2017, Crystal growth during keyhole mode laser welding, Acta Mater, 133, 10, 10.1016/j.actamat.2017.04.074
Williams S. Unpublished work. Cranfield University; 2016.
Maguire M. Unpublished work. Sandia National Laboratory; 2016.
Wu, 2007, A review of laser fabrication of metallic engineering components and of materials, Mater Sci Tech, 23, 631, 10.1179/174328407X179593
Yadroitsev, 2007, Application of laser assisted technologies for fabrication of functionally graded coatings and objects for the international thermonuclear experimental reactor components, J Nucl Mater, 362, 189, 10.1016/j.jnucmat.2007.01.078
Elmer JW. Private contribution. Lawrence Livermore National Laboratory.
Seifi M, Christiansen D, Beuth J, Harrysson O, Lewandowski JJ. Process mapping, fracture and fatigue behavior of Ti-6Al-4V produced by EBM additive manufacturing. In: Proceedings of world conference on titanium, 13th. Wiley Warrendale (PA), Hoboken (NJ): TMS; 2016. p. 1373–7.
Kirchner, 2015, Process window for electron beam melting of Ti-6Al-4V, Powder Metall, 58, 246, 10.1179/0032589915Z.000000000244
Weingarten, 2015, Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg, J Mater Process Technol, 221, 112, 10.1016/j.jmatprotec.2015.02.013
Shuai L, Wei Q, Shi Y, Zhang J, Wei L. Micro-crack formation and controlling of Inconel 625 parts. In: Solid freeform fabrication symposium. Austin (TX); 2016. p. 520–9.
Li, 2012, Balling behavior of stainless steel and nickel powder during selective laser melting process, Int J Adv Manuf Technol, 59, 1025, 10.1007/s00170-011-3566-1
Budinski KG. Engineering materials: properties and selection, 4th ed. Prentic Hall; 1992.
Yaws CL. Handbook of vapor pressure: volume 4: inorganic compounds and elements. Gulf Professional Publishing; 1995.
Gong, 2014, Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes, Addit Manuf, 1, 87
Bobbio, 2017, Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: experimental characterization and thermodynamic calculations, Acta Mater, 127, 133, 10.1016/j.actamat.2016.12.070
Shen, 2015, Fabrication of Fe-FeAl functionally graded material using the wire-arc additive manufacturing process, Metall Mater Trans B, 47, 763, 10.1007/s11663-015-0509-5
Muller, 2013, Modeling and control of a direct laser powder deposition process for functionally graded materials (FGM) parts manufacturing, J Mater Process Technol, 213, 685, 10.1016/j.jmatprotec.2012.11.020
Brentrup, 2013, Fabrication and characterization of graded transition joints for welding dissimilar alloys, Weld J, 92, 72s
Domack, 2005, Development of nickel-titanium graded composition components, Rapid Prototyp J, 11, 41, 10.1108/13552540510573383
Aboulkhair, 2016, On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties, J Mater Process Technol, 230, 88, 10.1016/j.jmatprotec.2015.11.016
Buchbinder, 2011, High power selective laser melting (HP SLM) of aluminum parts, Phys Proc, 12, 271, 10.1016/j.phpro.2011.03.035
Chou, 2015, Additive manufacturing of Al-12Si alloy via pulsed selective laser melting, JOM, 67, 590, 10.1007/s11837-014-1272-9
Manfredi, 2013, From powders to dense metal parts: characterization of a commercial AlSiMg alloy processed through direct metal laser sintering, Materials, 6, 856, 10.3390/ma6030856
Maskery, 2016, Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography, Mater Charact, 111, 193, 10.1016/j.matchar.2015.12.001
Prashanth, 2014, Microstructure and mechanical properties of Al-12Si produced by selective laser melting: effect of heat treatment, Mater Sci Eng A, 590, 153, 10.1016/j.msea.2013.10.023
Schmidtke, 2011, Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing, Phys Proc, 12, 369, 10.1016/j.phpro.2011.03.047
Taminger, 2006, Evolution and control of 2219 aluminum microstructural features through electron beam freeform fabrication, Mater Sci Forum, 519–521, 1297, 10.4028/www.scientific.net/MSF.519-521.1297
Wang, 2014, The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy, Mater Sci Eng A, 597, 370, 10.1016/j.msea.2014.01.012
Yan, 2015, Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering, Mater Sci Eng A, 628, 238, 10.1016/j.msea.2015.01.063
Zhang, 2016, Selective laser melting of high strength Al-Cu-Mg alloys: processing, microstructure and mechanical properties, Mater Sci Eng A, 656, 47, 10.1016/j.msea.2015.12.101
Bhattacharya, 2011, Microstructural evolution of AISI 4340 steel during Direct Metal Deposition process, Mater Sci Eng A, 528, 2309, 10.1016/j.msea.2010.11.036
Casalino, 2015, Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel, Opt Laser Technol, 65, 151, 10.1016/j.optlastec.2014.07.021
Choi, 2005, Characteristics of laser aided direct metal/material deposition process for tool steel, Int J Mach Tool Manu, 45, 597, 10.1016/j.ijmachtools.2004.08.014
Haselhuhn, 2015, In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing, J Mater Process Technol, 226, 50, 10.1016/j.jmatprotec.2015.06.038
Kempen K, Yasa E, Thijs L, Kruth JP, Van Humbeeck J. Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel. In: Lasers in manufacturing 2011: proceedings of the sixth international wlt conference on lasers in manufacturing; 2011. p. 255–63.
Sander, 2016, Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting, Mater Des, 89, 335, 10.1016/j.matdes.2015.09.148
Xie, 2005, Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels, J Mater Process Technol, 170, 516, 10.1016/j.jmatprotec.2005.05.055
Bi, 2010, Feasibility study on the laser aided additive manufacturing of die inserts for liquid forging, Mater Des, 31, S112, 10.1016/j.matdes.2009.10.039
Zhang, 2007, Research on the processing experiments of laser metal deposition shaping, Opt Laser Technol, 39, 549, 10.1016/j.optlastec.2005.10.009
Abd-Elghany, 2012, Property evaluation of 304L stainless steel fabricated by selective laser melting, Rapid Prototyp J, 18, 420, 10.1108/13552541211250418
Yadroitsev, 2012, Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks, Rapid Prototyp J, 18, 201, 10.1108/13552541211218117
Kobryn, 2000, The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V, Scripta Mater, 43, 299, 10.1016/S1359-6462(00)00408-5
Lee J, Lapira E, Bagheri B, Kao H-A. Recent advances and trends in predictive manufacturing systems in big data environment. Manuf Lett 2013;1(1):38–41.
Huang Y, Leu MC, Mazumder J, Donmez A. Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J Manuf Sci Eng 2015;137(1): Article No. 014001.
DebRoy, 2017, Building digital twins of 3D printing machines, Scripta Mater, 135, 119, 10.1016/j.scriptamat.2016.12.005
Knapp, 2017, Building blocks for a digital twin of additive manufacturing, Acta Mater, 135, 390, 10.1016/j.actamat.2017.06.039
Amon, 1998, Shape deposition manufacturing with microcasting: processing, thermal and mechanical issues, J Manuf Sci Eng, 120, 656, 10.1115/1.2830171
Chin, 1996, Thermomechanical modeling of molten metal droplet solidification applied to layered manufacturing, Mech Mater, 24, 257, 10.1016/S0167-6636(96)00037-3
Chin, 2001, Successive deposition of metals in solid freeform fabrication processes, part 1: thermomechanical models of layers and droplet columns, J Manuf Sci Eng, 123, 623, 10.1115/1.1380199
Chin, 2001, Successive deposition of metals in solid freeform fabrication processes, part 2: thermomechanical models of adjacent droplets, J Manuf Sci Eng, 123, 632, 10.1115/1.1380200
Klingbeil, 2002, Residual stress-induced warping in direct metal solid freeform fabrication, Int J Mech Sci, 44, 57, 10.1016/S0020-7403(01)00084-4
Foroozmehr, 2010, Effect of path planning on the laser powder deposition process: thermal and structural evaluation, Int J Adv Manuf Technol, 51, 659, 10.1007/s00170-010-2659-6
Sochalski-Kolbus LM, Payzant EA, Cornwell PA, Watkins TR, Babu SS, Dehoff RR, et al. Comparison of residual stresses in Inconel 718 simple parts made by electron beam melting and direct laser metal sintering. Metall Mater Trans A 2015;46a(3):1419–32.
Zhong, 2005, Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy, Scripta Mater, 53, 159, 10.1016/j.scriptamat.2005.03.047
Griffith ML, Keicher DM, Atwood CL, Romero JA, Smugeresky JE, Harwell LD, et al. Free form fabrication of metallic components using Laser Engineered Net Shaping (LENS(TM)). In: Solid freeform fabrication proceedings, September 1996; 1996, p. 125–31.
Xue, 2010, Microporosity effects on cyclic plasticity and fatigue of LENS (TM)-processed steel, Acta Mater, 58, 4029, 10.1016/j.actamat.2010.03.014
Yu, 2013, Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition, Mater Des, 45, 228, 10.1016/j.matdes.2012.08.078
Zhang, 2013, The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder, Mater Sci Eng A, 584, 21, 10.1016/j.msea.2013.06.055
Qu, 2008, Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing, Mater Sci Eng A, 475, 207, 10.1016/j.msea.2007.04.111
Wu, 2003, Influence of high temperature exposure on the mechanical behavior and microstructure of 17–4 PH stainless steel, J Mater Sci, 38, 965, 10.1023/A:1022377225704
Nickel alloy 718-properties, composition, heat treatments and specifications. AZO Materials; 2008 <http://www.azom.com/article.aspx?ArticleID=4188>.
Donachie MJ. Superalloys-source book. American Society for Metals: Metals Park (OH); 1984, [424 p.].
Materials-alloys poured. American Casting Company; 2014 <http://americancastingco.com/materials/>.
Nickel-based super alloy Inconel 625-properties and applications by united performance alloys. AZO Materials; 2008 <http://www.azom.com/article.aspx?ArticleID=4461>.
Frantz, 1990
Rocha SSd, Adabo GL, Henriques GEP, Nóbilo MAdA. Vickers hardness of cast commercially pure titanium and Ti-6Al-4V alloy submitted to heat treatments. Braz Dent J 2006;17(2):126–9.
Kobryn, 1996, 112
Buchbinder D. Generative fertigung von aluminiumbauteilen für die serienproduktion. AluGenerativ Abschlussbericht BMBF 01RIO639A-D; 2010.
Material data sheet: EOS aluminium AlSi10Mg for EOSINT M 270. EOS; 2014 <https://www.anubis3d.com/documents/dmls/datasheets/Aluminum-AlSi10Mg.pdf>.
Kempen, 2015, Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation, Mater Sci Tech, 31, 917, 10.1179/1743284714Y.0000000702
Manfredi, 2013, Direct metal laser sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications, Metall Ital, 10, 15
Rosenthal, 2017, Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by selective laser melting, Mater Sci Eng A, 682, 509, 10.1016/j.msea.2016.11.070
Rosenthal, 2014, Microstructure and mechanical properties of AlSi10Mg parts produced by the laser beam additive manufacturing (AM) technology, Metall Microstruct Anal, 3, 448, 10.1007/s13632-014-0168-y
Siddique S, Wycisk E, Frieling G, Emmelmann C, Walther F. Microstructural and mechanical properties of selective laser melted Al 4047. Appl Mech Mater 2015.
Gu J, Cong B, Ding J, Williams SW, Zhai Y. Wire+arc additive manufacturing of aluminium. In: Solid freeform fabrication proceedings; 2014. p. 451–8.
Lumley R. Technical data sheets for heat treated aluminium high pressure die castings. CSIRO Light Metals Flagship; 2008 <http://mastersonics.com/documents/mmm_applications/ultrasonic_metallurgy/pio2-hpdc-aluminum.pdf>.
Aluminum A413.0-F die casting alloy. MatWeb <http://www.matweb.com/search/datasheet.aspx?matguid=641c7123204a4c6bb81190f8685cf60d&ckck=1> [browsed March 2017].
Beese, 2016, Review of mechanical properties of Ti-6Al-4V made by laser-based additive manufacturing using powder feedstock, JOM, 68, 724, 10.1007/s11837-015-1759-z
Welding Handbook. 9th ed. Miami (FL): American Welding Society; 2001.
Welding Handbook. Welding technology, 8th ed. Miami (FL): American Welding Society; 1987.