Additive Manufacturing in Vascular Stent Fabrication

MATEC Web of Conferences - Tập 253 - Trang 03003 - 2019
Lei Yang1,2, Xin Chen1,3,2,4, Lei Zhang1,2, Lei Li5, Shuangzhu Kang1,2, Chengjin Wang1,2, Wei Sun1,6,2
1111 'Biomanufacturing and Engineering Living Systems' Innovation International Talents Base, 100084, Beijing, China
2Department of Mechanical Engineering, Tsinghua University, 100084, China
3China Center for Information Industry Development, Beijing, 100048, China
4Ministry of Industry and Information Technology Equipment Industry Development Center, Beijing 100846, China
5Beijing Huaxin Hospital First Hospital of Tsinghua University, Beijing, 100016, China
6Department of Mechanical Engineering, Drexel University, Philadelphia, PA, United States of America

Tóm tắt

High-efficiency formation of personalized stent by additive manufacturing (3D printing) has gained deal of attention and research in interventional and personalized medicine. In this article, the structural characteristics of vascular scaffolds and the application and innovation of additive manufacturing technology in the process of angioplasty are reviewed. In the future, with the continuous maturity of additive manufacturing technology, it is expected to be an important part of interventional precision medicine to manufacture personalized vascular stent.

Từ khóa


Tài liệu tham khảo

Fuster,, 2014, Nature Reviews Cardiology, 11, 671, 10.1038/nrcardio.2014.137

Li,, 2010, Journal of Interventional Radiology, 19, 253

Guo,, 2013, Journal of Clinical Rehabilitative Tissue Engineering Research, 17, 2257

Mei, M., Characteristics and clinical application of different types of cerebral vascular scaffolds. Journal of Clinical Rehabilitative Tissue Engineering Research, 2014.

Liu,, 2008, Chinese Journal of Medical Instrumentation, 14, 2

Liu,, 2006, Chinese Journal of Medical Instrumentation, 12, 1

White,, 1997, Journal of Endovascular Surgery the Official Journal of the International Society for Endovascular Surgery, 4, 152, 10.1583/1074-6218(1997)004<0152:EAACOE>2.0.CO;2

Coppi,, 1998, J Endovasc Surg, 5, 206, 10.1583/1074-6218(1998)005<0206:EWTSEA>2.0.CO;2

Roos,, 2005, Journal of Vascular Surgery, 42, 1002, 10.1016/j.jvs.2005.07.009

Junnarkar,, 2001, Ulster Medical Journal, 70, 51

Duda,, 2000, Journal of Vascular & Interventional Radiology, 11, 645, 10.1016/S1051-0443(07)61620-0

Sigwart,, 1987, N Engl J Med, 316, 701, 10.1056/NEJM198703193161201

M,, 2003, Biomaterials, 24, 4929, 10.1016/S0142-9612(03)00416-2

Jr,, 2001, Reviews in Cardiovascular Medicine, 2, 115

Pfisterer,, 2006, Journal of the American College of Cardiology, 48, 2584, 10.1016/j.jacc.2006.10.026

Johnson, J. CYPHER™ Sirolimus-eluting Coronary Stent on RAPTORTM Over-the-Wire Delivery System. 2003; Available from: https://www.accessdata.fda.gov/cdrh_docs/pdf2/p020026c.pdf.

Scientific, B. TAXUS Liberte and TAXUS Liberte Atom. 2008; Available from: https://www.accessdata.fda.gov/cdrh_docs/pdf6/p060008s008c.pdf.

Mauri,, 2007, N Engl J Med, 356, 1020, 10.1056/NEJMoa067731

Abbott. The XIENCEV Everolimus Eluting Coronary Stent System Instructions for Use. 2008; Available from: https://www.accessdata.fda.gov/cdrh_docs/pdf7/p070015c.pdf.

Rasmussen,, 2010, Lancet, 375, 1090, 10.1016/S0140-6736(10)60208-5

Dave,, 2016, Journal of Clinical & Diagnostic Research Jcdr, 10, OE01

Caiazzo,, 2015, International Journal of Cardiology, 201, 129, 10.1016/j.ijcard.2015.07.101

Shrivastava, S., Medical device materials. Advanced Materials & Processes, 2004.

Moliterno,, 2005, New England Journal of Medicine, 353, 724, 10.1056/NEJMe058140

Huang,, 2004, Polymer, 45, 8675, 10.1016/j.polymer.2004.10.054

Jiang, w., et al., Application of L-lactic acid and its derivatives in food industry. Journal of Food

Tsuji, H., Poly(l-Lactide). 2015: Springer Berlin Heidelberg.

Bährlerapp, M., Springer Lexikon Kosmetik und Körperpflege. 2007, Springer Berlin Heidelberg.

Abbott. Absorb GT1™ Bioresorbable Vascular Scaffold (BVS) System 2016; Available from: https://www.accessdata.fda.gov/cdrh_docs/pdf15/p150023b.pdf.

Dun, S., Study on Micro Injection Molding Technology of Biodegradable Stent. 2013, Dalian University of Technology.

Huang, B., et al., Fabricating polymer stents with injection molding. 2008, US.

Yu,, 2016, Materials, 9, 893, 10.3390/ma9110893

T,, 2000, Journal of the American College of Cardiology, 35, 1145, 10.1016/S0735-1097(00)00534-9

Peng, H., The Numerical Analysis on the Influence of Hemodynamic to Different Cross-sections of Struts. Journal of Biomedical Engineering Research, 2013(3): P. 158–161.

Flege,, 2013, Journal of Materials Science Materials in Medicine, 24, 241, 10.1007/s10856-012-4779-z

Su,, 2015, Materials Letters, 141, 355, 10.1016/j.matlet.2014.11.119

Tumbleston,, 2015, Science, 347, 1349, 10.1126/science.aaa2397

Van Lith,, 2017, Advanced Materials Technologies, 1, 1600138, 10.1002/admt.201600138

Ware, H.O.T. and Sun C.. Process development for high-resolution 3D-printing of bioresorbable vascular stents. in SPIE OPTO. 2017.

Cabrera, M.M., et al., Computationally designed 3D printed self-expandable polymer stents with biodegradation capacity for minimally invasive heart valve implantation:A proof-of-concept study. 2017.

A.J. Guerra, and Ciurana J., 3D-printed bioabsordable polycaprolactone stent: The effect of process parameters on its physical features. Materials & Design, 2017. 137.

Liu, Y., et al., Composite bioabsorbable vascular stents via 3D bio-printing and electrospinning for treating stenotic vessels. Journal of Southeast University, 2015(2): P. 254–258.

Tangdu Hospital completed the world's first 3D printed extravascular stent implantation for Nutcracker Syndrome. Journal of The Fourth Military Medical University, 2016(1): P. 4–4.

Liu, Q., Wang Z., and Liu Y., Method for the preparation of a three-dimensional porous tubular scaffolds and equipment. 2015: CN.

Xu, M., et al., Fast light curing nozzle for 3D printing equipment. 2015: CN.

Kang, S., Research on 3D printing equipment and forming technology of personalized biorebsorblable stent. 2018, Tsinghua University.

Anagnostopoulos,, 1972, American Journal of Cardiology, 30, 263, 10.1016/0002-9149(72)90070-7

Wang,, 2013, Plos One, 8, e71012, 10.1371/journal.pone.0071012

Jamshidi,, 2008, International Journal of Cardiology, 130, 310, 10.1016/j.ijcard.2008.04.083

Chen, X., Research of Customized Aortic Stent Graft Manufacture. 2017, Tsinghua University.

Li, R., Structure analysis of different textile-based artificial vascular. Progress in Textile Science & Technology, 2007(6): P. 17–17.

Wang, F., Desigh and Properties of Branched Graft for Endovascular Prostheses Application. 2014, Donghua University.

Wang, L., Design and Process Investigation on a New Type of Thoracic Stent. 2013, Dalian University of Technology.

Zhang, L., Fabrication and fundamental research of multi-branched blood vessel scaffolds with multi-layered wall. 2006, Tsinghua University.

Thông tin
Thông tin xuất bản

MATEC Web of Conferences

Tập 253

03003

Thông tin tác giả