Adaptive aeroelastic composite wings—Control and optimization issues

Composites Engineering - Tập 2 - Trang 457-476 - 1992
Terrence A. Weisshaar1
1School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN 47907-1282, U.S.A.

Tài liệu tham khảo

Barrett, 1990, Intelligent rotor blade actuation through directionally attached piezoelectric crystals Bisplinghoff, 1965 Bohlmann, 1990, Active structures technology development Buehler, 1956 Chiarappa, 1981, Deformable mirror surface control techniques, J. Guid. Control, 4, 27, 10.2514/3.56049 Crawley, 1988, Feasibility analysis of piezoelectric devices Cross, 1989, Piezoelectric and electrostrictive sensors and actuators for adaptive structures and smart materials, 9 DeCamp, 1984, Mission adaptive wing advanced research concepts, AIAA Paper No. 84-2088 Diederich, 1952, Charts and approximate formulas for the estimation of aeroelastic effects on the loading of swept and unswept wings, NACA TN 2608 Ehlers, 1991, Aeroelastic behavior of an adaptive lifting surface Ehlers, 1990, Static aeroelastic behavior of an adaptive laminated piezoelectric composite wing, 1611 Flax, 1961, Aeroeleasticity and flutter Hajela, 1991, Application of piezoelectric elements in supersonic panel flutter suppression Hodges, 1988, Review of composite rotor blade modelling, 305 1986 Jaffe, 1971 Kobyashi, 1984, Overview-Divergence of forward swept wings strengthened by composite material Lazarus, 1991, Fundamental mechanisms of aeroelastic control with control surface and strain actuation Mason, 1981, Piezoelectricity, its history and applications, J. Acoust. Soc. Am, 70, 1561, 10.1121/1.387221 Noll, 1989, Aeroservoelestic wind-tunnel investigations using the active flexible wing model—status and recent accomplishments, AIAA Paper No. 89-1168-CP Perry, 1988, Control law parameterization for an aeroelastic wind-tunnel model equipped with an active roll control system and comparison with experiment, 41 Rogers, 1990, Active vibration and structural control of shape memory alloy hybrid composites: Experimental results, J. Acoust. Soc. Am, 2803, 10.1121/1.399683 Sato, 1982, Deformable 2-D mirror using multilayered electrostrictors, Appl. Optics, 21, 3669, 10.1364/AO.21.003669 Schneider, 1986, Static aeroelastic effects on high-performance aircraft, AGARD Report No. 725 Scott, 1990, Control of flutter using adaptive materials Scott, 1991, Controlling panel flutter using adaptive materials Shirk, 1986, Aeroelastic tailoring—theory, practice and promise, J. Aircraft, 23, 6, 10.2514/3.45260 Song, 1991, Static aeroelasticity behavior of adaptive aircraft wing structures modelled as composite thin-walled beams Spangler, 1989, Piezoelectric actuators for helicopter rotor control Swigert, 1981, Electronic damping of orthogonal bending modes in a cylindrical mast-theory, J. Spacecraft Rockets, 18, 5, 10.2514/3.28047 Tsai, 1980 Uchino, 1986, Electrostrictive actuators: materials and applications, Ceram. Bull, 65, 647 Uchino, 1981, New electromechanical materials and their applications, Jap. J. Appl. Phys, 21, 225, 10.7567/JJAPS.20S4.225 Wada, 1989 Weisshaar, 1978, Aeroeleastic stability and performance characteristics of aircraft with advanced composite sweptforward wing structures Weisshaar, 1979, Forward swept wing static aeroelasticity, 10.21236/ADB042815 Weisshaar, 1980, Divergence of forward swept composite wings, J. Aircraft, 17, 442, 10.2514/3.57922 Weisshaar, 1987, Aeroelastic tailoring: creative uses of unusual materials Weisshaar, 1991, Adaptive static and dynamic aeroelastic design Wilson, 1986, Static aeroelasticity in the design of modern fighters, AGARD Report No. 725 Wolko, 1987, Structural design of the Wright flyers, 97