Achieving illustrious friction and corrosion resistance on a laser powder bed fusion nitinol rare earth alloy

Xiong, 2021, 3D-Printing damage-tolerant architected metallic materials with shape recoverability via special deformation design of constituent material, ACS Appl. Mater. Interfaces, 13, 39915, 10.1021/acsami.1c11226 Xue, 2022, Laser powder bed fusion of defect-free NiTi shape memory alloy parts with superior tensile superelasticity, Acta Mater., 229, 10.1016/j.actamat.2022.117781 Song, 2021, Microstructural origin of ultrahigh damping capacity in Ni-50.8 Ti-49.2 alloy containing nanodomains induced by insufficient annealing and low-temperature aging, Acta Mater., 205, 10.1016/j.actamat.2020.116541 Guo, 2021, A sandwich-structured Nb/NiTi composite with good bio-compatibility, near-linear-elastic deformation and large elastic admissible strain, Compos. B Eng., 207, 10.1016/j.compositesb.2020.108586 Wang, 2021, Anomalous stress-strain behavior of NiTi shape memory alloy close to the border of superelastic window, Scripta Mater., 204, 10.1016/j.scriptamat.2021.114135 Yu, 2021, Influence of Ni4Ti3 precipitate on pseudoelasticity of austenitic NiTi shape memory alloys deformed at high strain rate, Mater. Sci. Eng., 804, 10.1016/j.msea.2021.140753 Dadbakhsh, 2016, Texture and anisotropy in selective laser melting of NiTi alloy, Mater. Sci. Eng., 650, 225, 10.1016/j.msea.2015.10.032 Zhang, 2020, The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability, Appl. Mater. Today, 19 Lu, 2019, Ultrahigh-performance TiNi shape memory alloy by 4D printing, Mater. Sci. Eng., 763, 10.1016/j.msea.2019.138166 Moghaddam, 2018, Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting, Mater. Sci. Eng., 724, 220, 10.1016/j.msea.2018.03.072 Saedi, 2017, Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys, Mater. Sci. Eng., 686, 1, 10.1016/j.msea.2017.01.008 Lu, 2021, Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting, Acta Mater., 219, 10.1016/j.actamat.2021.117261 Xiong, 2022, Micro laser powder bed fusion of NiTi alloys with superior mechanical property and shape recovery function, Addit. Manuf., 57 Zhao, 2021, Superelastic behaviors of additively manufactured porous NiTi shape memory alloys designed with Menger sponge-like fractal structures, Mater. Des., 200, 10.1016/j.matdes.2021.109448 Dadbakhsh, 2015, Influence of SLM on shape memory and compression behaviour of NiTi scaffolds, CIRP Ann. - Manuf. Technol., 64, 209, 10.1016/j.cirp.2015.04.039 Wang, 2019, Additive manufacturing of NiTi shape memory alloys using pre-mixed powders, J. Mater. Process. Technol., 271, 152, 10.1016/j.jmatprotec.2019.03.025 Xiong, 2019, Selective laser melting of NiTi alloy with superior tensile property and shape memory effect, J. Mater. Sci. Technol., 35, 2238, 10.1016/j.jmst.2019.05.015 Saedi, 2016, The influence of heat treatment on the thermomechanical response of Ni-rich NiTi alloys manufactured by selective laser melting, J. Alloys Compd., 677, 204, 10.1016/j.jallcom.2016.03.161 Saedi, 2018, On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi, Acta Mater., 144, 552, 10.1016/j.actamat.2017.10.072 Wang, 2020, Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting, Addit. Manuf., 36 Zhang, 2020, Influence of heat treatment on corrosion behavior of rare earth element Sc modified Al-Mg alloy processed by selective laser melting, Appl. Surf. Sci., 509, 10.1016/j.apsusc.2020.145330 McNamara, 2021, Tantalum coating inhibits Ni-migration from titanium out-diffusion in NiTi shape memory biomedical alloy, Appl. Surf. Sci., 535, 10.1016/j.apsusc.2020.147621 Marattukalam, 2015, Microstructure and corrosion behavior of laser processed NiTi alloy, Mater. Sci. Eng. C., 57, 309, 10.1016/j.msec.2015.07.067 Qiu, 2020, Study on corrosion behavior of the selective laser melted NiTi alloy with superior tensile property and shape memory effect, Corrosion Sci., 175, 10.1016/j.corsci.2020.108891 Pu, 2021, Microstructure, phase transformation behavior and tensile superelasticity of NiTi shape memory alloys fabricated by the wire-based vacuum additive manufacturing, Mater. Sci. Eng., 812, 10.1016/j.msea.2021.141077 Singh, 2020, Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects, Mater. Today Adv., 8 Acar, 2020, Exploring surface oxidation behavior of NiTi-V alloys, Eur. Phys. J. Plus, 135, 58, 10.1140/epjp/s13360-019-00087-y Yang, 2018, Effect of La2O3 addition on densification behavior and properties of Mg-doped sialon, Ceram. Int., 44, 814, 10.1016/j.ceramint.2017.10.004 Zhang, 2020, 3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency, Sci. Adv., 6 Coey, 2020, Perspective and prospects for rare earth permanent magnets, Engineering, 6, 119, 10.1016/j.eng.2018.11.034 Yang, 2021, Rare earth improves strength and creep resistance of additively manufactured Zn implants, Compos. B Eng., 216, 10.1016/j.compositesb.2021.108882 Lu, 2020, Promoting the heterogeneous nucleation and the functional properties of directed energy deposited NiTi alloy by addition of La2O3, Addit. Manuf., 33 Yi, 2021, The higher compressive strength (TiB+La2O3)/Ti-Ni shape memory alloy composite with the larger recoverable strain, Compos. Commun., 23, 10.1016/j.coco.2020.100583 Sheikh, 2020, Alloying effect on the oxidation behavior of a ductile Al0.5Cr0.25Nb0.5Ta0.5Ti1.5 refractory high-entropy alloy, Mater. Today Adv., 7 Ahmadi, 2011, Effects of Yttrium Addition on Microstructure, hardness and resistance to wear and corrosive wear of TiNi Alloy, J. Mater. Sci. Technol., 27, 851, 10.1016/S1005-0302(11)60154-0 Yam, 2019, Microstructure, hardness and corrosion behavior of Ni-Ti alloy with the addition of rare earth metal oxide (Gd2O3), Mater. Res. Express, 6, 8 Lu, 2020, Effect of La2O3 addition on mechanical properties and wear behaviour of NiTi alloy fabricated by direct metal deposition, Opt Laser. Technol., 129, 10.1016/j.optlastec.2020.106290 Yu, 2021, Prediction of SLM-NiTi transition temperatures based on improved Levenberg-Marquardt algorithm, J. Mater. Res. Technol., 15, 3349, 10.1016/j.jmrt.2021.09.149 Guo, 2022, Corrosion resistance and biocompatibility of graphene oxide coating on the surface of the additively manufactured NiTi alloy, Prog. Org. Coating, 164, 10.1016/j.porgcoat.2022.106722 Fang, 2017, Effects of Ce/La misch metal content on microstructure evolution and mechanical properties of Mg-Zn-Y alloy, Mater. Sci. Eng., 699, 1, 10.1016/j.msea.2017.05.070 Xu, 2022, The martensitic transformation behavior and shape memory effect of laser powder bed fusion NiTi alloys influenced by rare earth addition, Mater. Sci. Eng., 848, 10.1016/j.msea.2022.143350 Bermingham, 2019, Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing, Acta Mater., 168, 261, 10.1016/j.actamat.2019.02.020 Ren, 2020, Microstructure and properties of equiatomic Ti–Ni alloy fabricated by selective laser melting, Mater. Sci. Eng., 771, 10.1016/j.msea.2019.138586 Bagheri, 2018, Fatigue behavior and cyclic deformation of additive manufactured NiTi, J. Mater. Process. Technol., 252, 440, 10.1016/j.jmatprotec.2017.10.006 Lu, 2017, Microstructure, bonding properties and the basis of pinning effect of in-situ NbC reinforced Co50 composite coating by plasma cladding, Surf. Coating. Technol., 319, 155, 10.1016/j.surfcoat.2017.04.003 He, 2019, Design of D022 superlattice with superior strengthening effect in high entropy alloys, Acta Mater., 167, 275, 10.1016/j.actamat.2019.01.048 Zhang, 2016, Strengthened corrosion control of poly (lactic acid) (PLA) and poly (ε-caprolactone) (PCL) polymer-coated magnesium by imbedded hydrophobic stearic acid (SA) thin layer, Corrosion Sci., 112, 327, 10.1016/j.corsci.2016.07.027 Yao, 2018, Corrosion resistance of a ceria/polymethyltrimethoxysilane modified Mg-Al-layered double hydroxide on AZ31 magnesium alloy, J. Alloys Compd., 764, 913, 10.1016/j.jallcom.2018.06.152 Guo, 2022, Corrosion resistance and biocompatibility of calcium phosphate coatings with a micro-nanofibrous porous structure on biodegradable magnesium alloys, ACS Appl. Bio Mater., 5, 1528, 10.1021/acsabm.1c01277 Su, 2018, Improving the degradation resistance and surface biomineralization ability of calcium phosphate coatings on a biodegradable magnesium alloy via a sol-gel spin coating method, J. Electrochem. Soc., 165, C155, 10.1149/2.0901803jes Jayaraj, 2016, Composite magnesium phosphate coatings for improved corrosion resistance of magnesium AZ31 alloy, Corrosion Sci., 113, 104, 10.1016/j.corsci.2016.10.010 Wang, 2020, Microhardness and microabrasion behaviour of NiTi shape memory alloy after femtosecond laser shock peening without coating in air Liu, 2020, Wear and heat shock resistance of Ni-WC coating on mould copper plate fabricated by laser, J. Mater. Res. Technol., 9, 8283, 10.1016/j.jmrt.2020.05.083 Li, 2020, Tribological behaviors of vacuum hot-pressed ceramic composites with enhanced cyclic oxidation and corrosion resistance, Ceram. Int., 46, 12911, 10.1016/j.ceramint.2020.02.057 Zhai, 2021, Recent progress on wear-resistant materials: designs, properties, and applications, Adv. Sci., 8, 10.1002/advs.202003739 Wang, 2017, Research combining experiment and FEM analysis on sliding wear behaviors and mechanisms of TiNi alloy, Wear, 386–387, 218, 10.1016/j.wear.2017.01.093 Li, 2019, Preparation of self-lubricating NiTi alloy and its self-adaptive behavior, Tribol. Int., 130, 43, 10.1016/j.triboint.2018.09.002 Abedini, 2009, Tribological behavior of NiTi alloy in martensitic and austenitic states, Mater. Des., 30, 4493, 10.1016/j.matdes.2009.05.031 Jiang, 2019, Effects of Sc or/and Ge addition on microstructure and mechanical properties of as-cast 6016 Al alloy, J. Alloys Compd., 809, 10.1016/j.jallcom.2019.151829 Liu, 2013, Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility, Nat. Mater., 12, 344, 10.1038/nmat3544 Ye, 2020, Microstructure and corrosion behavior of laser-cladding CeO2-doped Ni-based composite coatings on TC4, J. Chem. Neuroanat., 2020