Accelerated thermal cycle and chemical stability testing of polyethylene glycol (PEG) 6000 for solar thermal energy storage

Sari, 2012, Thermal energy storage properties and thermal reliability of some fatty acid esters/building material composites as novel form-stable PCMs, Sol. Energy Mater. Sol. Cells, 101, 114, 10.1016/j.solmat.2012.02.026 Shukla, 2008, Thermal cycling test of few selected inorganic and organic phase change materials, Renew. Energy, 33, 2606, 10.1016/j.renene.2008.02.026 Sharma, 2015, Developments in organic solid–liquid phase change materials and their applications in thermal energy storage, Energy Convers. Manag., 95, 193, 10.1016/j.enconman.2015.01.084 Sharma, 1999, Accelerated thermal cycle test of latent heat-storage materials, Sol. Energy, 66, 483, 10.1016/S0038-092X(99)00045-6 Porisini, 1988, Salt hydrates used for latent heat storage: corrosion of metals and reliability of thermal performance, Sol. Energy, 41, 193, 10.1016/0038-092X(88)90136-3 Tyagi, 2008, Thermal cycle testing of calcium chloride hexahydrate as a possible PCM for latent heat storage, Sol. Energy Mater. Sol. Cells, 92, 891, 10.1016/j.solmat.2008.02.021 Hasnain, 1998, Review on sustainable thermal energy storage technologies, part I: heat storage materials and techniques, Energy Convers. Manag., 39, 1127, 10.1016/S0196-8904(98)00025-9 Zalba, 2003, Review on thermal energy storage with phase change: materials, heat transfer analysis and applications, Appl. Therm. Eng., 23, 251, 10.1016/S1359-4311(02)00192-8 Al-Hinti, 2010, Experimental investigation on the use of water-phase change material storage in conventional solar water heating systems, Energy Convers. Manag., 51, 1735, 10.1016/j.enconman.2009.08.038 Khalifa, 2013, A storage domestic solar hot water system with a back layer of phase change material, Exp. Therm. Fluid Sci., 44, 174, 10.1016/j.expthermflusci.2012.05.017 Chaabane, 2014, Thermal performance of an integrated collector storage solar water heater (ICSSWH) with phase change materials (PCM), Energy Convers. Manag., 78, 897, 10.1016/j.enconman.2013.07.089 Reyes, 2014, Mushrooms dehydration in a hybrid-solar dryer, using a phase change material, Energy Convers. Manag., 83, 241, 10.1016/j.enconman.2014.03.077 Sari, 2002, Thermal performance of palmitic acid as a phase change energy storage material, Energy Convers. Manag., 43, 863, 10.1016/S0196-8904(01)00071-1 Sarı, 2001, Thermal performance of myristic acid as a phase change material for energy storage application, Renew. Energy, 24, 303, 10.1016/S0960-1481(00)00167-1 Sari, 2001, Thermal energy storage system using stearic acid as a phase change material, Sol. Energy, 71, 365, 10.1016/S0038-092X(01)00075-5 Mahfuz, 2014, Performance investigation of thermal energy storage system with phase change material (PCM) for solar water heating application, Int. Commun. Heat Mass Transf., 57, 132, 10.1016/j.icheatmasstransfer.2014.07.022 Esakkimuthu, 2013, Experimental investigation on phase change material based thermal storage system for solar air heating applications, Sol. Energy, 88, 144, 10.1016/j.solener.2012.11.006 Buddhi, 1997, Solar cooker with latent heat storage: Design and experimental testing, Energy Convers. Manag., 38, 493, 10.1016/S0196-8904(96)00066-0 Geddam, 2015, Determination of thermal performance of a box type solar cooker, Sol. Energy, 113, 324, 10.1016/j.solener.2015.01.014 Jiang, 2002, Study on transition characteristics of PEG/CDA solid–solid phase change materials, Polymer, 43, 117, 10.1016/S0032-3861(01)00613-9 Pielichowski, 1999, Thermal energy storage systems based on poly(vinyl chloride) blends, Eur. Polym. J., 35, 27, 10.1016/S0014-3057(98)00107-4 Karaman, 2011, Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage, Sol. Energy Mater. Sol. Cells, 95, 1647, 10.1016/j.solmat.2011.01.022 Pielichowska, 2014, Phase change materials for thermal energy storage, Prog. Mater. Sci., 65, 67, 10.1016/j.pmatsci.2014.03.005 Aydın, 2013, Fatty acid ester-based commercial products as potential new phase change materials (PCMs) for thermal energy storage, Sol. Energy Mater. Sol. Cells, 108, 98, 10.1016/j.solmat.2012.08.015 Sari, 2010, Synthesis, thermal energy storage properties and thermal reliability of some fatty acid esters with glycerol as novel solid–liquid phase change materials, Sol. Energy Mater. Sol. Cells, 94, 1711, 10.1016/j.solmat.2010.05.033 Mehrali, 2013, Shape-stabilized phase change materials with high thermal conductivity based on paraffin/graphene oxide composite, Energy Convers. Manag., 67, 275, 10.1016/j.enconman.2012.11.023 Tahan Latibari, 2013, Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol–gel method, Energy, 61, 664, 10.1016/j.energy.2013.09.012 Sharma, 2009, Review on thermal energy storage with phase change materials and applications, Renew. Sustain. Energy Rev., 13, 318, 10.1016/j.rser.2007.10.005 Sharma, 2002, Accelerated thermal cycle test of acetamide, stearic acid and paraffin wax for solar thermal latent heat storage applications, Energy Convers. Manag., 43, 1923, 10.1016/S0196-8904(01)00131-5 Sari, 2003, Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications, Energy Convers. Manag., 44, 2277, 10.1016/S0196-8904(02)00251-0