Abrasive wear behavior of sintered steels prepared with MoS2 addition

Fleck, 1981, Effect of density on tensile strength, fracture toughness and fatigue crack propagation behaviour of sintered steel, Powder Metall, 3, 121, 10.1179/pom.1981.24.3.121 Kubicki, 1995, Stress concentration at pores in sintered materials, Powder Metall, 38, 295, 10.1179/pom.1995.38.4.295 Holmes, 1985, Fatigue crack initiation in a porous steel, Powder Metall, 28, 231, 10.1179/pom.1985.28.4.231 Christian, 1995, Relation between pore structure and fatigue behavior in sintered iron–copper–carbon, Int. J. Powder Metall., 31, 51 Gnanamoorthy, 2004, Effect of slide roll ratio on the contact fatigue behavior sintered steel & hardened steels, J. Failure Anal. Prev., 4, 73 da Silva, 2005, Abrasive wear of steam treated sintered iron, Wear, 258, 166, 10.1016/j.wear.2004.09.042 Bergman, 1997, The influence of primary carbides and test parameters on abrasive and erosive wear of selected PM high speed steels, Tribol. Int., 30, 183, 10.1016/S0301-679X(96)00040-0 Badisch, 2003, Abrasive wear of high speed steels: influence of abrasive particles and primary carbides on wear resistance, Tribol. Int., 36, 765, 10.1016/S0301-679X(03)00058-6 Shyu, 2006, In situ reacted titanium carbide-reinforced aluminum alloys composite, J. Mater. Process. Technol., 171, 411, 10.1016/j.jmatprotec.2004.08.034 Murthy, 1998, Abrasive wear behaviour of SiC whisker-reinforced silicate matrix composites, Wear, 223, 79, 10.1016/S0043-1648(98)00307-X Kok, 2005, Abrasive wear of Al2O3 particle reinforced 2024 aluminium alloy composites fabricated by vortex method, Composites: Part A Appl. Sci. Manuf., 1 Berns, 1999, Influence of abrasive particles on wear mechanism and wear resistance in sliding abrasion tests at elevated temperatures, Wear, 233–235, 424, 10.1016/S0043-1648(99)00209-4 Sustarsic, 2001, Vacuum sintering of water-atomised HSS powders with MoS2 additions, Vacuum, 61, 471, 10.1016/S0042-207X(01)00161-0 Rapoport, 1999, Inorganic fullerene-like material as additives to lubricants: structure–function relationship, Wear, 225–229, 975, 10.1016/S0043-1648(99)00040-X Khorsand, 2002, The role of heat treatment on wear behavior of powder metallurgy low alloy steels, Mater. Des., 23, 667, 10.1016/S0261-3069(02)00046-8 S. Dhanasekaran, R. Gnanamoorthy, Dry sliding friction and wear characteristics of Fe–C–Cu alloy containing molybdenum di sulphide, Mater. Des., 2006, in press. ASTM B 328-96, Standard test method for density, oil content and interconnected porosity of sintered metal structural parts and oil -impregnated bearings, ASTM International, West Conshohocken, 1996, p. 108. S. Dhanasekaran, R. Gnanamoorthy, Microstructure, strength and tribological behaviour of Fe–C–Cu–Ni sintered steels prepared with MoS2 addition, J. Mater. Sci., in press. Srinath, 2005, Effect of nanoclay reinforcement on tensile and tribo behavior of nylon 6, J. Mater. Sci., 40, 2897, 10.1007/s10853-005-2439-0 Modi, 2003, Abrasive wear behavior of high carbon steel: effects of microstructure and experimental parameters and correlation with mechanical properties, Mater. Sci. Eng. A, 343, 235, 10.1016/S0921-5093(02)00384-2 Kassim S. Al-Rubaie, Humberto N. Yoshimura, Jose Daniel Biasoli de Mello, Two-body abrasive wear of Al–SiC composites, Wear 233–235 (1999) 444–454. Ceschini, 2005, Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests, Tribol. Int., 1 Prasasd, 1997, Factors controlling the abrasive wear response of a zinc based alloy silicon carbide particle composite, Composite Part A, 28A, 301, 10.1016/S1359-835X(96)00115-7 Rabinowicz, 1995 Rafiq, 2001, Neural network design for engineering applications, Comput. Struct., 79, 1541, 10.1016/S0045-7949(01)00039-6