A unified stress-strain model for LRS FRP-confined concrete columns with square and circular cross-sections

Anggawidjaja, 2006, Deformation capacity of RC piers wrapped by new fiber-reinforced polymer with large fracture strain, Cem Concr Compos, 28, 914, 10.1016/j.cemconcomp.2006.07.011 Bai, 2019, Stiffness-based design-oriented compressive stress-strain model for large-rupture-strain (LRS) FRP-confined concrete, Compos Struct, 223, 110953, 10.1016/j.compstruct.2019.110953 Cihan BC, Binbir E, Yıldırım H, Celik OC. Compression tests on circular polypropylene and steel fiber reinforced concrete-filled double skin steel tubes. In: 11th International Symposium on Steel Structures, November 3-6, Jeju, Korea; 2021. Dai, 2011, Behavior and modeling of concrete confined with FRP composites of large deformability, J Compos Constr, 15, 963, 10.1061/(ASCE)CC.1943-5614.0000230 Lam, 2003, Design-oriented stress-strain model for FRP-confined concrete, Constr Build Mater, 17, 471, 10.1016/S0950-0618(03)00045-X Ozbakkaloglu, 2013, Behavior of square and rectangular ultra high-strength concrete-filled FRP tubes under axial compression, Compos B Eng, 54, 97, 10.1016/j.compositesb.2013.05.007 Rousakis, 2016, Reusable and recyclable nonbonded composite tapes and ropes for concrete columns confinement, Compos B Eng, 103, 15, 10.1016/j.compositesb.2016.08.003 Bai, 2021, Dynamic compressive behavior of concrete confined with unidirectional natural flax FRP based on SHPB tests, Compos Struct, 259, 113233, 10.1016/j.compstruct.2020.113233 Bai, 2017, Buckling of steel reinforcing bars in FRP-confined RC columns: An experimental study, Constr Build Mater, 140, 403, 10.1016/j.conbuildmat.2017.02.149 Wang, 2008, Effect of corner radius on the performance of CFRP-confined square concrete columns: Test, Eng Struct, 30, 493, 10.1016/j.engstruct.2007.04.016 Wu, 2010, Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns, Eng Struct, 32, 32, 10.1016/j.engstruct.2009.08.012 Shan, 2019, Effectiveness of CFRP confinement and compressive strength of square concrete columns, J Compos Constr, 23, 04019043, 10.1061/(ASCE)CC.1943-5614.0000967 Han, 2020, Compressive behavior of large rupture strain (LRS) FRP-confined square concrete columns: experimental study and model evaluation, Mater Struct, 53, 1, 10.1617/s11527-020-01534-4 Saleem, 2017, Compressive behavior of PET FRP–confined circular, square, and rectangular concrete columns, J Compos Constr, 21, 04016097, 10.1061/(ASCE)CC.1943-5614.0000754 Ozbakkaloglu, 2013, Axial compressive behavior of square and rectangular high-strength concrete-filled FRP tubes, J Compos Constr, 17, 151, 10.1061/(ASCE)CC.1943-5614.0000321 Lin, 2020, Advanced stress-strain model for FRP-confined concrete in square columns, Compos B Eng, 197, 108149, 10.1016/j.compositesb.2020.108149 Jiang, 2019, Local and global prediction on stress-strain behavior of FRP-confined square concrete sections, Compos Struct, 226, 111205, 10.1016/j.compstruct.2019.111205 Ilki, 2003, Compressive behaviour of carbon fibre composite jacketed concrete with circular and non-circular cross-sections, J Earthquake Eng, 7, 381, 10.1080/13632460309350455 Al-Salloum, 2007, Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates, Compos B Eng, 38, 640, 10.1016/j.compositesb.2006.06.019 Wei, 2012, Unified stress-strain model of concrete for FRP-confined columns, Constr Build Mater, 26, 381, 10.1016/j.conbuildmat.2011.06.037 Lee, 2010, Analytical model for fiber-reinforced polymer-jacketed square concrete columns in axial compression, ACI Struct J, 107 Lim, 2014, Design model for FRP-confined normal-and high-strength concrete square and rectangular columns, Mag Concr Res, 66, 1020, 10.1680/macr.14.00059 Wu, 2007, Design-oriented stress-strain model for concrete prisms confined with FRP composites, Constr Build Mater, 21, 1107, 10.1016/j.conbuildmat.2005.12.014 Pimanmas, 2019, Evaluation of existing stress-strain models and modeling of PET FRP–confined concrete, J Mater Civ Eng, 31, 04019303, 10.1061/(ASCE)MT.1943-5533.0002941 Lam, 2003, Design-oriented stress-strain model for FRP-confined concrete in rectangular columns, J Reinf Plast Compos, 22, 1149, 10.1177/0731684403035429 Zeng, 2020, Axial compressive behavior of polyethylene terephthalate/carbon FRP-confined seawater sea-sand concrete in circular columns, Constr Build Mater, 234, 117383, 10.1016/j.conbuildmat.2019.117383 Sirach, 2020, Concrete columns confined with large rupture strain composites: an emerging field, 277 Yuan, 2021, Compressive behavior and modelling of engineered cementitious composite (ECC) confined with LRS FRP and conventional FRP, Compos Struct, 272, 114200, 10.1016/j.compstruct.2021.114200 Han, 2020, Compressive behavior for recycled aggregate concrete confined with recycled polyethylene naphthalate/terephthalate composites, Constr Build Mater, 261, 120498, 10.1016/j.conbuildmat.2020.120498 Bai, 2022, Simplified plasticity damage model for large rupture strain (LRS) FRP-confined concrete, Compos Struct, 280, 114916, 10.1016/j.compstruct.2021.114916 Ye, 2021, Recyclable LRS FRP composites for engineering structures: Current status and future opportunities, Compos B Eng, 212, 108689, 10.1016/j.compositesb.2021.108689 Ispir, 2018, Hybrid confinement of concrete through use of low and high rupture strain FRP, Compos B Eng, 153, 243, 10.1016/j.compositesb.2018.07.026 Bai, 2021, Cyclic stress-strain model for large-rupture strain fiber-reinforced polymer (LRS FRP)-confined concrete, J Build Eng, 42, 102459, 10.1016/j.jobe.2021.102459 Bai, 2019, Dynamic behavior of PET FRP and its preliminary application in impact strengthening of concrete columns, Appl Sci, 9, 4987, 10.3390/app9234987 Bai, 2020, Quasi-static and dynamic tensile properties of large-rupture-strain (LRS) polyethylene terephthalate fiber bundle, Constr Build Mater, 232, 117241, 10.1016/j.conbuildmat.2019.117241 Bai, 2014, Cyclic compressive behavior of concrete confined with large rupture strain FRP composites, J Compos Constr, 18, 04013025, 10.1061/(ASCE)CC.1943-5614.0000386 Zeng, 2020, Stress-strain behavior of polyethylene terephthalate fiber-reinforced polymer-confined normal-, high-and ultra high-strength concrete, J Build Eng, 30, 101243, 10.1016/j.jobe.2020.101243 Ispir, 2015, Monotonic and cyclic compression tests on concrete confined with PET-FRP, J Compos Constr, 19, 04014034, 10.1061/(ASCE)CC.1943-5614.0000490 Dai, 2012, Seismic retrofit of square RC columns with polyethylene terephthalate (PET) fibre reinforced polymer composites, Constr Build Mater, 27, 206, 10.1016/j.conbuildmat.2011.07.058 Zeng, 2020, Compressive behavior of FRP-wrapped seawater sea-sand concrete with a square cross-section, Constr Build Mater, 262, 120881, 10.1016/j.conbuildmat.2020.120881 Zhang, 2015, Behavior of concrete-filled FRP tubes under cyclic axial compression, J Compos Constr, 19, 04014060, 10.1061/(ASCE)CC.1943-5614.0000523 European Committee for Standardization (CEN). 2004. Eurocode 2: Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings. EN 1992-1- 1: 2004 (E). Brussels, Belgium. American Concrete Institute (ACI). Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19). USA; 2019. ASTM. Standard test method for tensile properties of polymer matrix composite materials. 2017; ASTM D3039/D3039M-17. West Conshohocken, PA: ASTM. Lam, 2004, Ultimate condition of fiber reinforced polymer-confined concrete, J Compos Constr, 8, 539, 10.1061/(ASCE)1090-0268(2004)8:6(539) Li, 2021, Axial stress-strain behavior of carbon FRP-confined seawater sea-sand recycled aggregate concrete square columns with different corner radii, Compos Struct, 262, 113589, 10.1016/j.compstruct.2021.113589 Fallah Pour, 2018, Simplified design-oriented axial stress-strain model for FRP-confined normal- and high-strength concrete, Eng Struct, 175, 501, 10.1016/j.engstruct.2018.07.099 Wang, 2016, Size effect on axial stress-strain behavior of CFRP-confined square concrete columns, Constr Build Mater, 118, 116, 10.1016/j.conbuildmat.2016.04.158 Hany, 2015, Axial stress-strain model of CFRP-confined concrete under monotonic and cyclic loading, J Compos Constr, 19, 04015004, 10.1061/(ASCE)CC.1943-5614.0000557 Pantelides, 2007, Confinement model of concrete with externally bonded FRP jackets or posttensioned FRP shells, J Struct Eng, 133, 1288, 10.1061/(ASCE)0733-9445(2007)133:9(1288) Lim, 2014, Confinement model for FRP-confined high-strength concrete, J Compos Constr, 18, 04013058, 10.1061/(ASCE)CC.1943-5614.0000376 Isleem, 2019, A new numerical model for polymer-confined rectangular concrete columns, Proc Inst Civ Eng Struct Build, 172, 528, 10.1680/jstbu.17.00103 Li, 2016, Cyclic response of FRP-confined concrete with post-peak strain softening behavior, Constr Build Mater, 123, 814, 10.1016/j.conbuildmat.2016.07.065 Pham, 2014, Stress prediction model for FRP confined rectangular concrete columns with rounded corners, J Compos Constr, 18, 04013019, 10.1061/(ASCE)CC.1943-5614.0000407 Zeng, 2018, Behavior of large-scale FRP-confined rectangular RC columns under axial compression, Eng Struct, 174, 629, 10.1016/j.engstruct.2018.07.086 Ilki, 2004, Low strength concrete members externally confined with FRP sheets, Struct Eng Mech, 18, 167, 10.12989/sem.2004.18.2.167 Toutanji, 2010, Behavior of large-scale rectangular columns confined with FRP composites, J Compos Constr, 14, 62, 10.1061/(ASCE)CC.1943-5614.0000051 Harajli, 2006, Axial stress-strain relationship for FRP confined circular and rectangular concrete columns, Cem Concr Compos, 28, 938, 10.1016/j.cemconcomp.2006.07.005 Triantafillou, 2016, FRP confinement of wall-like reinforced concrete columns, Mater Struct, 49, 651, 10.1617/s11527-015-0526-5 Xiao, 2000, Compressive behavior of concrete confined by carbon fiber composite jackets, J Mater Civ Eng, 12, 139, 10.1061/(ASCE)0899-1561(2000)12:2(139) Binici, 2008, Design of FRPs in circular bridge column retrofits for ductility enhancement, Eng Struct, 30, 766, 10.1016/j.engstruct.2007.05.012 Teng, 2009, Refinement of a design-oriented stress-strain model for FRP-confined concrete, J Compos Constr, 13, 269, 10.1061/(ASCE)CC.1943-5614.0000012 Jiang, 2016, Plasticity-based criterion for confinement design of FRP jacketed concrete columns, Mater Struct, 49, 2035, 10.1617/s11527-015-0632-4 Hu, 2013, An improved criterion for sufficiently/insufficiently FRP-confined concrete derived from ultimate axial stress, Eng Struct, 46, 431, 10.1016/j.engstruct.2012.08.001 Li, 2018, Cyclic stress-strain model for FRP-confined concrete considering post-peak softening, Compos Struct, 201, 902, 10.1016/j.compstruct.2018.06.088 Cao, 2016, Cross-sectional unification on the stress-strain model of concrete subjected to high passive confinement by fiber-reinforced polymer, Polymers, 8, 186, 10.3390/polym8050186 Hoshikuma, 1997, Stress-strain model for confined reinforced concrete in bridge piers, J Struct Eng, 123, 624, 10.1061/(ASCE)0733-9445(1997)123:5(624) Saenz, 1964, discussion of“ Equation for the Stress-Strain Curve of Concrete” by Desayi and Krishnan, J Am Conc Inst, 61, 1229 Faustino, 2014, Design model for square RC columns under compression confined with CFRP, Compos B Eng, 57, 187, 10.1016/j.compositesb.2013.09.052 Ozbakkaloglu, 2013, Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model, Compos B Eng, 55, 607, 10.1016/j.compositesb.2013.07.025