A tight sandstone multi-physical hydraulic fractures simulator study and its field application

Perkins, 1961, Widths of hydraulic fractures, J. Pet. Technol., 13, 937, 10.2118/89-PA Sneddon, 1946, The distribution of stress in the neighbourhood of a crack in an elastic solid, Proc. R. Soc. A Math. Phys. Eng. Sci., 187, 229 Nordgren, 1972, Propagation of a vertical hydraulic fracture, Soc. Petrol. Eng. J., 12, 306, 10.2118/3009-PA Geertsma, 1969, A rapid method of predicting width and extent of hydraulically induced fractures, J. Pet. Technol., 21, 1571, 10.2118/2458-PA Advani, 1990, Three-dimensional modeling of hydraulic fractures in layered media: Part I—finite element formulations, J. Energy Resour. Technol., 112, 1, 10.1115/1.2905706 Baca, 1984, Modelling fluid flow in fractured-porous rock masses by finite-element techniques, Int. J. Numer. Methods Fluids, 4, 337, 10.1002/fld.1650040404 Chen, 2012, Finite element modelling of viscosity-dominated hydraulic fractures, J. Pet. Sci. Eng., 88–89, 136, 10.1016/j.petrol.2011.12.021 Moes, 2002, Extended finite element method for cohesive crack growth, Eng. Fract. Mech., 69, 813, 10.1016/S0013-7944(01)00128-X Moes, 1999, A finite element method for crack growth without remeshing, Int. J. Numer. Methods Eng., 46, 131, 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J Sukumar, 2000, Extended finite element method for three-dimensional crack modelling, Int. J. Numer. Methods Eng., 48, 1549, 10.1002/1097-0207(20000820)48:11<1549::AID-NME955>3.0.CO;2-A Lecampion, 2009, An extended finite element method for hydraulic fracture problems, Commun. Numer. Methods Eng., 25, 121, 10.1002/cnm.1111 Mohammadnejad, 2013, An extended finite element method for hydraulic fracture propagation in deformable porous media with the cohesive crack model, Finite Elem. Anal. Des., 73, 77, 10.1016/j.finel.2013.05.005 Salimzadeh, 2015, A three-phase XFEM model for hydraulic fracturing with cohesive crack propagation, Comput. Geotech., 69, 82, 10.1016/j.compgeo.2015.05.001 Wu, 2015, Simultaneous multifracture treatments: fully coupled fluid flow and fracture mechanics for horizontal wells, SPE J., 20, 337, 10.2118/167626-PA Wu, 2014, Mechanics analysis of interaction between hydraulic and natural fractures in shale reservoirs Wu, 2013, Investigation of the impact of fracture spacing and fluid properties for interfering simultaneously or sequentially generated hydraulic fractures, SPE Prod. Oper., 28, 427 Crouch, 1976, Solution of plane elasticity problems by the displacement discontinuity method. I. Infinite body solution, Int. J. Numer. Methods Eng., 10, 301, 10.1002/nme.1620100206 Li, 2016, A fully coupled thermo-hydro-mechanical, three-dimensional model for hydraulic stimulation treatments, J. Nat. Gas Sci. Eng., 34, 64, 10.1016/j.jngse.2016.06.046 Wu, 2017, Numerical analysis of promoting more-uniform development of simultaneous multiple fracture propagation in horizontal wells, SPE Prod. Oper., 32 Tang, 2016, Integrated simulation of multi-stage hydraulic fracturing in unconventional reservoirs, J. Nat. Gas Sci. Eng., 36, 875, 10.1016/j.jngse.2016.11.018 Prashanth, 2018, Optimizaiton of simultaneously propagating multiple fractures in hydraulic fracturing to achieve uniform growth using data-based model reduction, Chem. Eng. Res. Des., 136, 675, 10.1016/j.cherd.2018.06.015 Guo, 2018, Numerical investigation of effects of subsequent parent well injection on Interwell fracturing interference using reservoir-geomechanics-fracturing modeling, SPE J. Yu, 2018, A numerical model for simulating pressure response of well interference and well performance in tight oil reservoirs with complex-fracture geometries using the fast embedded-discrete-fracture-model method, SPE Reservoir Eval. Eng., 21, 489, 10.2118/184825-PA Yu, 2018, Simulation of shale gas transport and production with complex fractures using embedded discrete fracture model, AIChE J., 64, 2251, 10.1002/aic.16060 Yew, 2015 Mastrojannis, 1980, Growth of planar cracks induced by hydraulic fracturing, Int. J. Numer. Methods Eng., 15, 41, 10.1002/nme.1620150105 Love, 2013 Friehauf, 2009 Narasimhan, 1976, An integrated finite difference method for analyzing fluid flow in porous media, Water Resour. Res., 12, 57, 10.1029/WR012i001p00057 Pruess, 1985, A practical method for modeling fluid and heat flow in fractured porous media, Soc. Petrol. Eng. J., 25, 14, 10.2118/10509-PA Ribeiro, 2012, A new three-dimensional, compositional, model for hydraulic fracturing with energized fluids