A survey of models, analysis tools and compensation methods for the control of machines with friction
Tóm tắt
Từ khóa
Tài liệu tham khảo
Ackermann, 1986, Dynamical behavior of nonlinear multibody system due to Coulomb friction and backlash, 289
Amin, 1993, The reliability of describing function predictions for systems with friction
Amontons, 1699, On the resistance originating in machines, 206
Anderson, 1986
Armstrong, 1988, Dynamics for robot control: friction modeling and ensuring excitation during parameter identification
Armstrong, 1989, Control of machines with non-linear low-velocity friction: a dimensional analysis, 180
Armstrong, 1989, On finding exciting trajectories for identification experiments involving systems with nonlinear dynamics, Int. J. of Robotics Research, 8, 28, 10.1177/027836498900800603
Armstrong-Hélouvry, 1990, Stick-slip arising from Stribeck friction, 1377
Armstrong-Hélouvry, 1991
Armstrong-Hélouvry, 1992, A perturbation analysis of stick-slip, DE-Vol. 49, 41
Armstrong-Hélouvry, 1993, Stick-slip and control in low-speed motion, IEEE Trans. on Automatic Control, 38, 1483, 10.1109/9.241562
Armstrong-Hélouvry, 1993, Friction modelling for controls, and Compensation Techniques for Servos with Friction, 1905
Asada, 1984, Analysis and design of a direct-drive arm with a five-bar-link parallel drive mechanism, J. of Dynamic Systems, Measurement and Control, 106, 225, 10.1115/1.3149676
Åström, 1989
Atherton, 1975
Auslander, 1990, Stopping: the endpoint of mechanical motion control, Electrosoft, 1, 166
Bannerjee, 1968, Influence of kinetic friction on the critical velocity of stick-slip motion, Wear, 12, 107, 10.1016/0043-1648(68)90338-4
Bell, 1966, Dynamic behavior of plain slideways, Vol. 181, 169
Bell, 1969, A study of the stick-slip motion of machine tool feed drives, Vol. 184, 543
Bennett, 1979
Bentsman, 1990, Oscillations-induced transitions and their application in control of dynamical systems, J. of Dynamic Systems, Measurement and Control, 112, 313, 10.1115/1.2896147
Bernard, 1980, The simulation of Coulomb friction in mechanical systems, Simulation, 34, 11, 10.1177/003754978003400104
Biel, 1920, Die Reibung in Glietlagern bie Zusatz von Voltool zu Mineralol und bie Veranderung der Unlaufzahl und der Temperatur, Zeitschrift des Vereines Seutscher Ingenieure, 64, 449
Blackwell, 1988, Precision pointing of scientific instruments on space station: The LFGGREC perspective, 566
Blau, 1987, A model for run-in and other transitions in sliding friction, J. of Tribology, 109, 537, 10.1115/1.3261499
Bliman, 1993, Mathematical study of the Dahl's friction model, Euro. J. Mech., A/Solids, 11, 835
Bliman, 1991, Friction modelling by hysteresis operators. applications to Dahl, Stiction and Stribeck effects
Bliman, 1993, A system-theoretic approach of systems with hysteresis. Application to friction modelling and compensation, 1844
Bo, 1982, The friction-speed relation and its influence on the critical velocity of the stick-slip motion, Wear, 82, 277, 10.1016/0043-1648(82)90223-X
Bogoliubov, 1961
1984
Bowden, F. P. (1950). BBC Broadcast.
Bowden, 1939, The nature of sliding and the analysis of friction, Vol. 169, 371
Bowden, 1939, The area of contact between stationary and between moving surfaces, Vol. 169, 391
Bowden, 1956
Bowden, 1973, Friction—an Introduction to Tribology
Brandenburg, 1986, Stability of a speed-controlled elastic two-mass system with backlash and Coulomb friction and optimization by a load observer, 371
Brandenburg, 1987, Influence and partial compensation of simultaneously acting backlash and Coulomb friction in a position- and speed-controlled elastic two-mass system, 1041
Brandenburg, 1988, Stability analysis and optimization of a position-controlled elastic two-mass-system with backlash and Coulomb friction, 220
Brandenburg, 1988, Influence and partial compensation of simultaneously acting backlash and Coulomb friction in a position- and speed-controlled elastic two-mass system
Brandenburg, 1989, Influence and adaptive compensation of simultaneously acting backlash and Coulomb friction in elastic two-mass systems of robots and machines tools, 10.1109/ICCON.1989.770544
Brandenburg, 1991, Influence and compensation of Coulomb friction in industrial pointing and tracking systems, 1407
Brockley, 1967, Friction-induced vibration, J. of Lubrication Technology, 89, 101, 10.1115/1.3616917
Brockley, 1968, The time-dependence of static friction, J. of Lubrication Technology, 90, 35, 10.1115/1.3601558
Brogan, 1991
Budanov, 1980, Interaction of friction and vibration, Soviet J. of Friction and Wear, 1, 79
Burdekin, 1978, Experimental study of normal and shear characteristics of machined surfaces in contact, J. of Mechanical Engineering Science, 20, 129, 10.1243/JMES_JOUR_1978_020_023_02
Cameron, 1984, On a unified theory of boundary lubrication
Canudas de Wit, 1988
Canudas de Wit, 1987, Adaptive friction compensation in DC motor drives, IEEE J. of Robotics and Automation, RA-3
Canudas de Wit, 1991, Adaptive friction compensation in robot manipulators: low-velocities, The Inter. J. of Robotics Research, 10, 189, 10.1177/027836499101000301
Canudas de Wit, 1989, Adaptive friction compensation in robot manipulators: Low velocities, 1352
Canudas de Wit, 1993, Dynamic friction models and control design, 1920
Canudas de Wit, 1990, Robust adaptive friction compensation, 1383
Cebuhar, 1988, Smoothing and approximate linearization of discontinuous control systems
Chau, 1990, A critical analysis of dithering algorithms for image processing, 309
Cheng, 1985, An incremental constitutive relation of unilateral contact friction for large deformation analysis, J. of Applied Mechanics, 52, 639, 10.1115/1.3169114
Cheok, 1988, Modeling and identification of a class of servomechanism systems with stick-slip friction, J. of Dynamic Systems, Measurement and Control, 110, 324, 10.1115/1.3152689
Chou, 1990, Dithering and its effects on sigma delta and multi-stage sigma delta modulation, 268
Cincinnati Milacron (1986). Revised Stick-Slip Test Procedure.
Clingman, 1991, Flexure bearing reduces startup friction, NASA Tech Briefs, 15, 72
Cockerham, 1976, Stick-slip stability by analogue simulation, Wear, 36, 189, 10.1016/0043-1648(76)90004-1
Cockerham, 1976, Stability criterion for stick-slip motion using a discontinuous dynamic friction model, Wear, 40, 113, 10.1016/0043-1648(76)90022-3
Coulomb, 1785, Théorie des machines simples, en ayant égard au frottement de leurs parties, et a la roideur dews cordages, x, 161
Craig, 1987
Craig, 1987
Cutkosky, 1987, Skin materials for robotic fingers, 1649
Cutkosky, 1986, Friction, stability and the design of robotic fingers, The Int. J. of Robotics Research, 5, 20, 10.1177/027836498600500402
Czichos, 1978
Da Vinci, 1519
Dahl, 1968
Dahl, 1977, Measurement of solid friction parameters of ball bearings
Derjaguin, 1956, A theory of stick-slip sliding of solids, J. of Technical Physics (Moscow), 6
Derjaguin, 1957, A theory of stick-slip sliding of solids, 257
Dieterich, 1979, Modeling of rock friction: 1. experimental results and constitutive equations, J. of Geophysical Research, 84, 2161, 10.1029/JB084iB05p02161
Dieterich, 1991, Micro-mechanics of slip instabilities with rate- and state-dependent friction, Eos, Trans. Am. Geophys. Union
Dohring, 1993, A load-dependent transmission friction model: theory and experiments, 430
Dokos, 1946, Sliding friction under extreme pressures-1, J. of Applied Mechanics, 13, 148, 10.1115/1.4009539
Dowson, 1979
Dowson, 1966
Dudley, 1949, Frictional relaxation oscillations, Philosophical Magazine, 40, 849
Dupont, 1992, The effect of Coulomb friction on the existence and uniqueness of the forward dynamics problems, 1442
Dupont, 1992, The use of compliance to resolve the existence and uniqueness of the forward dynamics solution with Coulomb friction, 537
Dupont, 1993, The effect of friction on the forward dynamics problem, Int. J. Robotics Research, 12, 164, 10.1177/027836499301200205
Dupont, 1994, Avoiding stick-slip through PD control, IEEE Trans. on Automatic Control, 39, 1059, 10.1109/9.284901
Dupont, 1992, Stability of sliding frictional surfaces with varying normal force, Journal of Vibration and Acoustics, 116, 237, 10.1115/1.2930418
Dupont, 1993, Friction modeling and control in boundary lubrication, 1915
Ehrich, 1991, An investigation of control strategies for friction compensation
Eismann, P. (1992). Private Communication.
Ellison, 1983, Inertial stabilization of periscope sights band driven three axle gimbal, 107
Eschmann, 1985
Estler, 1980, What's new in preventive maintenance for gears and bearings
Fatunla, 1988
Facchiano, 1984, EP industrial gear oils—a look at additive functions and a comparison of sulfur phosphorus and leaded gear oils, Lubrication Engineering, 40, 598
Friedland, 1993, Friction estimation in multimass systems, 1927
Friedland, 1992, On adaptive friction compensation, 2889
Friedman, 1959, Reduction of static friction by sonic vibrations, J. Appl. Physics, 30, 1572, 10.1063/1.1735002
Fuller, 1984
Furusho, 1990, Vibration control of robot arm using joint torque feedback, Trans. Japan Soc. of Mech. Eng., C-56, 119
Futami, 1990, Nanometer positioning and its micro-dynamics, Nanotechnology, 1, 31, 10.1088/0957-4484/1/1/006
Gao, 1990, On stick-slip and the velocity dependence of friction at low speeds, J. of Tribology, 112, 354, 10.1115/1.2920264
Gassenfeit, 1988, Friction coefficients measured at lubricated planar contacts during start-up, J. of Tribology, 110, 533, 10.1115/1.3261670
Germann, 1990, Fine-steering mirror technology supports 10 nanoradian systems, Optical Engineering, 29, 1351, 10.1117/12.55737
Gilbart, 1974, Adaptive compensation for an optical tracking telescope, Automatica, 10, 125, 10.1016/0005-1098(74)90018-1
Gitis, 1986, Assessing the anti-stick properties of slideway materials, Soviet Engineering Research, 57, 21
Gitis, 1986, Study of anti-stick-slip properties of machine tool guideway materials, Soviet J. of Friction and Wear, 7, 72
Godfrey, 1967, Vibration reduces metal to metal contact and causes an apparent reduction in friction, ASLE Transactions, 10, 183, 10.1080/05698196708972178
Gogoussis, 1988, Modeling robots: a real time method for solving the forward dynamics problem incorporating friction
Gogoussis, 1990, A method for the real time solution of the forward dynamics problem for robots incorporating friction, Trans. ASME, J. Dyn. Sys., Meas. and Control, 112, 630, 10.1115/1.2896188
Goyal, 1991, Planar sliding with dry friction, part 1. Limit surface and moment function, Wear, 143, 307, 10.1016/0043-1648(91)90104-3
Gu, 1984, Slip motion and stability of a single degree of freedom elastic system with rate and state dependent friction, J. Mech. Phys. Solids, 32, 167, 10.1016/0022-5096(84)90007-3
Haessig, 1991, On the modeling and simulation of friction, J. of Dynamic Systems, Measurement and Control, 113, 354, 10.1115/1.2896418
Halling, 1975
Hamrock, 1986, Lubrication of machine elements
Harmer, 1952, The jerking motion caused by static friction in position control systems
Hansson, 1993, Fuzzy anti-reset windup for PID controllers
Harnoy, 1994, Dynamic friction model of lubricated surfaces for precise motion control, Tribology Transactions, 10.1080/10402009408983336
Harris, 1984
Hashimoto, 1989, Robot motion control based on joint torque sensing, 256
Hashimoto, 1992, Experimental study on torque control using harmonic drive built-in torque sensors, 2026
Heck, 1991, Model reduction of a Coulomb friction damped system using singular perturbation theory, 539
Held, 1988, Estimation of friction characteristics, inertial and coupling coefficients in robotic joints based on current and speed measurements, 207
Henrichfreise, 1985, Fast elastic robots. Control of an elastic robot axis accounting for nonlinear drive properties, 23
Henrichfreise, 1992, Observed-based Coulomb friction torque compensation for a position control system
Hersey, 1914, The laws of lubrication of horizontal journal bearings, J. Wash. Acad. Sci., 4, 542
Hersey, 1966
Hertz, 1881, On the contact of elastic solids, J. Reine und Anges. Math., 92, 156
Hess, 1990, Friction at a lubricated line contact operating at oscillating sliding velocities, J. of Tribology, 112, 147, 10.1115/1.2920220
Hess, 1991, Normal vibrations and friction under harmonic loads: part I—Hertzian contacts, J. of Tribology, 113, 80, 10.1115/1.2920607
Hess, 1991, Normal vibrations and friction under harmonic loads: part II—rough planar contacts, J. of Tribology, 113, 87, 10.1115/1.2920608
Himmell, 1985, Examination of adaptive control-based approaches to friction compensation in spacecraft gimbal control systems, 642
Hirel, 1990, Adaptive optics, dither optimization method in an adaptive optic model, 22
Hojjat, 1991, Application of electromagnetic impulsive force to precise positioning, Int. J. Japan Soc. Precision Engineering, 25, 39
Horikawa, 1991, Dynamic stiffness control of active air bearing, Int. J. Japan Soc. Precision Engineering, 25, 45
Horowitz, 1991, Extensions of dithered feedback systems, Inter. J. of Control, 54, 83, 10.1080/00207179108934152
Howard, 1993, A minimum principle for the dynamic analysis of systems with frictional contacts, 437
Howe, 1988, The sliding of robot fingers under combined torsion and shear loading, 103
Hsu, 1987, Adaptive identification and control for manipulators without using joint accelerations, 1201
Ibrahim, 1992, Friction-Induced vibration, chatter, squel, and chaos: part I—mechanics of friction, DE-Vol. 49, 107
Ibrahim, 1992, Friction-induced vibration, chatter, squeal, and chaos: part II—dynamics and modeling, DE-Vol. 49, 123
Johannes, 1973, The role of rate of application of the tangential force in determining the static friction coefficient, Wear, 24, 384
Johnson, 1991, Experimental identification of friction and its compensation in precise, position controlled mechanisms, 1400
Johnson, 1962, Tangential tractions and microslip, 6
Johnson, 1987
Kao, 1992, Dextrous Manipulation with compliance and sliding, Int. J. Robotics Research, 11, 20, 10.1177/027836499201100102
Karlen, 1990, A dual-arm dexterous manipulator system with anthropomorphic kinematics, 368
Karnopp, 1985, Computer simulation of stick-slip friction in mechanical dynamic systems, ASME J. of Dynamic Systems, Measurement and Control, 107, 100, 10.1115/1.3140698
Kato, 1970, On the dynamic behavior of machine tool slideway, Bulletin of the Japanese Soc. of Mechanical Engineers, 13, 170, 10.1299/jsme1958.13.170
Kato, 1972, Some considerations of characteristics of static friction of machine tool slideway, J. of Lubrication Technology, 94, 234, 10.1115/1.3451699
Kato, 1974, Stick slip motion of machine tool slideway, ASME J. of Engineering for Industry, 96, 557, 10.1115/1.3438365
Khalil, 1992
Khitrik, 1987, Static and dynamic characteristics of friction pairs, Soviet J. of Friction and Wear, 8, 112
Ko, 1970, The measurement of friction and friction-induced vibration, J. of Lubrication Technology, 92, 543, 10.1115/1.3451468
Kosuge, 1988, Motion control of a robot arm using joint torque sensors
Kragelskii, 1988
Kubo, 1986, Application of nonlinear friction compensation to robot arm control, 722
Kuc, 1991, An iterative learning control of robot manipulators, Trans. on Robotics and Automation, 7, 835, 10.1109/70.105392
Lee, 1991, 37, 50
Leonard, 1992, Adaptive friction compensation for bi-directional low-velocity tracking, 267
Linker, 1992, Effects of variable normal stress on rock friction: observations and constitutive equations, J. of Geophysical Research, 97, 4923, 10.1029/92JB00017
Lötstedt, 1981, Coulomb friction in two-dimensional rigid body systems, Zeitschrift für Angewandte Mathematik un Mechanik, 61, 605, 10.1002/zamm.19810611202
Lubrizol, Inc., 1988, Product Data Sheet, 5346
Ludema, 1988, Engineering progress and cultural problems in tribology, Lubrication Engineering, 44, 500
Luh, 1983, Joint torque control by a direct feedback for industrial robots, IEEE Trans. on Automatic Control, AC-28, 153, 10.1109/TAC.1983.1103215
MacColl, 1945
Maron, 1989, Identification and adaptive control of mechanical systems with friction, 325
Maron, 1989, Nonlinear identification and observer based compensation of friction in mechanical systems
Martins, 1990, A study of static and kinetic friction, Int. J. Engineering Science, 28, 29, 10.1016/0020-7225(90)90014-A
Mason, 1988, On the inconsistency of rigid-body frictional planar mechanics, 524
Maqueira, 1993, Adaptive friction compensation for line-of-slight pointing and stabilization, 1942
Mees, 1984, Describing functions: ten years on. IMA, J. of Applied Mathematics, 32, 221
Merchant, 1946, Characteristics of typical polar and non-polar lubricant additives under stick-slip conditions, Lubrication Engineering, 2, 56
Millman, G. (1990). Cincinnati Milacron, Private Communication.
Mobil Oil Corporation, 1971, Gears and their lubrication, Technical Bulletin 1-92-003
Mobil Oil Corporation, 1978, Way lubrication—machine tools, Technical Bulletin 8-93-001
Moore, 1972
Moore, 1975
Morgowicz, 1988, Techniques for real-time simulation of robot manipulators
Morin, 1833, New friction experiments carried out at Metz in 1831–1833, 4, 1
Mossaheb, 1983, Application of a method of averaging to the study of dithers in non-linear systems, Inter. J. of Control, 38, 557, 10.1080/00207178308933094
Mukerjee, 1985, Self-calibration in robot manipulators, 1050
Newman, 1992, Experimental evaluation of a new traction-drive robotic transmission, 652
Newton, 1678, Philosophiae Naturales Principia Mathematica, S. Pepys, Reg. Soc. Praeses
O'Connor, 1992, Active magnetic bearings give systems a lift, Mechanical Engineering, 114, 52
Oden, 1985, Models and computational methods for dynamic friction phenomena, Comput. Meth. Appl. Mech. Eng., 52, 527, 10.1016/0045-7825(85)90009-X
Okubo, 1986, Experimental and numerical model studies of frictional instability seismic sources
Ostertag, 1989, Functional distrubance observer for simultaneous control and dry friction compensation, 421
Painlevé, 1985, Sur les Lois du Frottement de Glissement, Comptes Rendus de l'Académie des Sciences, 121, 112
Palmgren, 1945
Pan, 1989, Simple formulas for performance parameters used in elastohydrodynamically lubricated line contacts, J. of Tribology, 111, 246, 10.1115/1.3261900
Papay, 1974, EP gear oils today and tomorrow, Lubrication Engineering, 30, 445
Papay, 1988, Industrial gear oils—state of the art, Lubrication Engineering, 44, 218
Papay, 1976, Advances in gear additive technology, Lubrication Engineering, 32, 229
Pavelescu, 1987, The sliding friction coefficient—its evolution and usefulness, Wear, 120, 321, 10.1016/0043-1648(87)90025-1
Peshkin, 1988, Minimization of energy in quasistatic manipulation, 421
Pfeffer, 1986, Joint torque sensory feedback in the control of a PUMA manipulator
Pfeffer, 1989, Joint torque sensory feedback in the control of a PUMA manipulator, IEEE Trans. on Robotics and Automation, 5, 418, 10.1109/70.88056
Polycarpou, 1992, Transitions between sticking and slipping, DE-Vol. 49, 139
Pope, 1989
Popp, 1990, Stick-slip vibrations and chaos, Phil. Trans., R. Soc. London series A, 332, 89
Rabinowicz, 1951, The nature of the static and kinetic coefficients of friction, J. of Applied Physics, 22, 1373, 10.1063/1.1699869
Rabinowicz, 1956, Autocorrelation analysis of the sliding process, J. of Applied Physics, 27, 131, 10.1063/1.1722321
Rabinowicz, 1958, The intrinsic variables affecting the stick-slip process, 71, 668
Rabinowicz, 1959, A study of the stick-slip process
Rabinowicz, 1965
Rabinowicz, 1978, Friction, especially low friction, 351
Rabinowicz, 1955, The statistical nature of friction, Trans. of the ASME, 22, 981
Rabinowicz, 1951, Metallic transfer between sliding metals: an autoradiographic study, 208, 455
Radcliffe, 1990, A property of stick-slip friction models which promotes limit cycle generation, 1198
Rajan, 1987, Dynamics of a rigid body in frictional contact with rigid walls: motion in two dimensions, 671
Rattan, 1989, Rule-based fuzzy control of a single-link flexible manipulator in the presence of joint friction and load changes, 2749
Rayiko, 1988, Some aspects of boundary lubrication in the local contact of friction surfaces, Wear, 126, 69, 10.1016/0043-1648(88)90109-3
Reynolds, 1886, On the theory of lubrication and its application to Mr. Beauchamp Tower's experiments, including an experimental determination of the viscosity of olive oil, Phil. Trans. Royal Soc., 177, 157, 10.1098/rstl.1886.0005
Rice, 1983, Stability of steady frictional slipping, J. of Applied Mechanics, 50, 343, 10.1115/1.3167042
Richardson, 1976, Surface friction under time-dependent loads, Wear, 37, 87, 10.1016/0043-1648(76)90183-6
Ro, 1993, Model reference adaptive control of dual-mode micro/macro dynamics of ball screws for nanometer motion, ASME J. of Dynamics Systems, Measurement and Control, 113, 103, 10.1115/1.2897383
Rooney, 1982, Coulomb friction in mechanism sliding joints, Mechanism and Machine Theory, 17, 207, 10.1016/0094-114X(82)90006-4
Ruina, 1980, Friction laws and instabilities: a quasistatic analysis of some dry frictional behavior
Ruina, 1986
Sadeghi, 1989, Compressible elastohydrodynamic lubrication of rough surfaces, J. of Tribology, 111, 56, 10.1115/1.3261879
Salisburty, 1988, Preliminary design of a whole-arm manipulation system (WAMS), 254
Sampson, 1943, Friction behavior during the slip portion of the stick-slip process, J. Applied Physics, 14, 689, 10.1063/1.1714948
Satyendra, 1956, Describing functions representing the effect of inertia, backlash and Coulomb friction on the stability of an automatic control system, AIEE Transactions, 75, 243
Schäfer, 1989, Compensation of Coulomb friction in industrial elastic two-mass systems through model reference adaptive control, 1409
Schäfer, 1990, Model reference position control of an elastic two-mass system with backlash and Coulomb friction using different types of observers, vol. 3, 797
Schäfer, 1993, Model reference position control of an elastic two-mass system with compensation of Coulomb friction, 1937
Schimmels, 1993, The space of admittance control laws that guarantees force-assembly with friction, 443
Shen, 1962, Synthesis of high order nonlinear control systems with ramp input, IRE Trans. on Automatic Control, AC-7, 22, 10.1109/TAC.1962.1105422
Shen, 1964, Nonlinear compensation of a second- and third-order system with dry frictio, IEEE Trans. on Applications and Industry, 83, 128, 10.1109/TAI.1964.5407776
Silverberg, 1957, A note on the describing function of an element with Coulomb, static and viscous friction, AIEE Trans., 75, 423
Singh, 1960, Study of critical velocity of stick-slip sliding, J. of Engineering for Industry, 393, 10.1115/1.3664261
Singh, 1990, Modified PID control with stiction: periodic orbits, bifurcation and chaos
Slotine, 1984, Sliding controller of robot manipulators, Int. J. Control, 40, 421, 10.1080/00207178408933284
Slotine, 1987, On the adaptive control of robot manipulators, Int. J. Robotics Res., 6, 49, 10.1177/027836498700600303
Slotine, 1989, Compomsite adaptive control of robot manipulators, Automatica, 25, 509, 10.1016/0005-1098(89)90094-0
Slotine, 1991
Smith, 1989
Sommerfeld, 1904, Zur Hydrodynamischen Theorie der Schmiermittehreibung, Zeitschrift Fur Mathematic und Physik, 50, 97
Soom, A. (1992). Private correspondence.
Southward, 1991, Robust nonlinear stick-slip friction compensation, ASME J. of Dynamic Systems, Measurement and Control, 113, 639, 10.1115/1.2896469
Sroda, 1988, Analysis of the shape of the contact geometry during meshing of involute gears, Wear, 121, 183, 10.1016/0043-1648(88)90042-7
Stockum, 1988, Precision stabilization system design to reduce the effects of friction, 159
Stribeck, 1902, Die Wesentlichen Eigenschaften der Gleit- und Rollenlager—the key qualities of sliding and roller bearings, Zeitschrift des Vereines Seutscher Ingenieure, 46, 1342
Stribeck, 1902, Die Wesentlichen Eigenschaften der Gleit- und Rollenlager—the key qualities of sliding and roller bearings, Zeitschrift des Vereines Seutscher Ingenieure, 46, 1432
Suzuki, 1991, Design and implementation of digital servo controller for high speed machine tools, 1246
Thomas, 1930, Vibrations damped by solid friction, Philosophical Magazine, 7, 329
Threlfall, 1978, The inclusion of Coulomb friction in mechanisms programs with particular reference to DRAM, Mechanism and Machine Theory, 13, 475, 10.1016/0094-114X(78)90020-4
Tolstoi, 1967, Significance of the normal degree of freedom and natural normal vibrations in contact friction, Wear, 10, 199, 10.1016/0043-1648(67)90004-X
Tomizuka, 1988, Implementation of adaptive techniques for motion control of robotic manipulators, ASME J. of Dynamic Systems, Measurement and Control, 110, 62, 10.1115/1.3152649
Tou, 1953, Coulomb and static friction in servo-mechanisms
Tou, 1953, Static and sliding friction in feedback systems, J. of Applied Physics, 24, 1210, 10.1063/1.1721473
Townsend, 1988, The effect of transmission design on the performance of force-controlled manipulators
Townsend, 1987, The effect of Coulomb friction and sticktion on force control, 883
Trinkle, 1989, A quasi-static analysis of dextrous manipulation with sliding and rolling contacts, 788
Tung, 1993, Low velocity friction compensation for machine tool feed drives, 1932
Tudor, 1982, The squeeze film under boundary lubrication conditions and its effect on the vertical displacement of sliding bodies, Wear, 80, 115, 10.1016/0043-1648(82)90092-8
Tustin, 1947, The effects of backlash and of speed-dependent friction on the stability of closed-cycle control systems, IEE Journal, 94, 143
Utkin, 1977, Variable structure systems with sliding mode: a survey, IEEE Trans. on Automatic Control, 22, 212, 10.1109/TAC.1977.1101446
Vidyasagar, 1991
Villanueva-Leal, 1984, Modeling the characteristics of interface surfaces by the finite element method, 198C, 9
Vinogradov, 1967, Steel-to-steel friction over a very wide range of sliding speeds, Wear, 10, 338, 10.1016/0043-1648(67)90275-X
Vischer, 1990, Design and development of torque-controlled joints, 271
Vischer, 1990, Performance evaluation for force/torque feedback control methodologies
Wallenborg, 1988, Limit cycle oscillations in high performance robot drives, 444
Walrath, 1984, Adaptive bearing friction compensation based on recent knowledge of dynamic friction, Automatica, 20, 717, 10.1016/0005-1098(84)90081-5
Wang, 1992, Dynamics of rigid bodies undergoing multiple friction contacts, 2764
Wellauer, 1976, Application of EHD oil film theory to industrial gear drives, J. of Engineering for Industry, 98B, 626, 10.1115/1.3438951
Widrow, 1985
Wills, 1980
Wilson, 1979, The relative thickness of grease and oil films in rolling bearings, 193, 185
Wolf, 1965, Stick-slip and machine tools, Lubrication Engineering, 21, 273
Woodward, 1963, Describing functions for nonlinear friction in relay servos, Trans. on Automatic Control, AC-8, 260, 10.1109/TAC.1963.1105567
Wu, 1980, Manipulator compliance based on joint torque control, 89
Xiaolan, 1987, A full numerical solutions for general transient elastohydrodynamic line contacts and its application, Wear, 121, 143
Yang, 1988, Adaptive pulse width control for precise positioning under the influence of stiction and Coulomb friction, ASME J. od Dynamic Systems, Measurement and Control, 110, 221, 10.1115/1.3152675
Younkin, 1991, Modeling machine tool feed servo drives using simulation techniques to predict performance, IEEE Trans. on Industry Applications, 27, 268, 10.1109/28.73610
Zames, 1976, Dither in nonlinear systems, IEEE Trans. on Automatic Control, AC-21, 660, 10.1109/TAC.1976.1101357
Zames, 1977, Structural stabilization and quenching by dither in nonlinear systems, IEEE Trans. on Automatic Control, AC-22, 352, 10.1109/TAC.1977.1101504
Zhu, 1988, Effect of surface roughness on point contact EHL, J. of Tribology, 110, 32, 10.1115/1.3261571