Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Nghiên cứu về việc giải phóng khung kim loại của bộ lọc chất thải từ hệ thống thông gió trong nhà máy điện hạt nhân
Tóm tắt
Các bộ lọc thông gió từ hệ thống thông gió trong khu vực kiểm soát của nhà máy điện hạt nhân sẽ được thay thế định kỳ. Nói chung, khung kim loại của các bộ lọc chất thải thường không bị kích hoạt và dự kiến có mức bức xạ thấp, do đó có thể được tái chế hoặc sử dụng lại sau khi trải qua một đánh giá giải phóng hệ thống. Theo yêu cầu quy định tại Trung Quốc, loại đánh giá này đóng vai trò quan trọng trong việc quản lý chất thải phóng xạ và một kế hoạch chi tiết nên được thiết lập dựa trên kinh nghiệm lâu dài và các đặc điểm cụ thể của từng đơn vị. Tập trung vào vấn đề này, một kế hoạch đánh giá giải phóng cho các khung kim loại trong các nhà máy điện hạt nhân đã được thiết lập trong bài báo này, nhằm trình bày kinh nghiệm trong việc quản lý chất thải phóng xạ cho các nhà điều hành nhà máy điện hạt nhân và các cơ quan chức năng.
Từ khóa
#nhà máy điện hạt nhân #quản lý chất thải phóng xạ #đánh giá giải phóng #khung kim loại #bộ lọc chất thảiTài liệu tham khảo
Nuclear Energy Agency of the OECD (1996) Recycling and reuse of scrap metals. Organization for Economic Co-operation and Development, Paris
IAEA (2000) IAEA-TECDOC-1130 recycle and reuse of materials and components from waste streams of nuclear fuel cycle facilities. International Atomic Energy Agency, Vienna
IAEA (2014) IAEA General Safety Requirements No. GSR Part 3 Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards. International Atomic Energy Agency, Vienna
IAEA (2004) IAEA Safety Standards Series. No. RS-G-1.7 Application of the Concepts of Exclusion, Exemption and Clearance. International Atomic Energy Agency, Vienna
State Administration for Market Regulation (2002) Basic standards for protection against ionizing radiation and for the safety of radiation sources. Beijing, China
European Commission (1999) Series Radiation Protection No. RP 101 Basis for the definition of surface contamination clearance levels for recycling or reuse of metals arising from the dismantling of nuclear installations. European Commission, Luxemburg
ISO (2016) ISO7503-1:2016 Measurement of radioactivity—measurement and evaluation of surface contamination—part 1: general principles. International Organization for Standardization, Geneva
IAEA (2012) IAEA safety reports series no. 67 monitoring for compliance with exemption and clearance levels. International Atomic Energy Agency, Vienna
ISO (2019) ISO20042:2019 Measurement of radioactivity-test method using high resolution germanium gamma-ray spectrometry. International Organization for Standardization, Geneva
ISO (2010) 9698:2010 Water quality: determination of tritium activity concentration—liquid scintillation counting method. International Organization for Standardization, Geneva
AFNOR, NF M60–325(2005) Nuclear energy: nuclear fuel cycle technology—waste—determination of tritium activity in waste by liquid scintillation. French Association for Standardization, La Plaine Saint-Denis
State Administration for Market Regulation (2019) GB/T 37865–2019 Analysis method of 14C in biological samples—Oxgen bomb combustion method. Environmental Science Press, Beijing, China
Hou XL, Φstergaard LF, Nielsen SP (2005) Determination of 63Ni and 55Fe in nuclear waste samples using radiochemical separation and liquid scintillation counting. Anal Chim Acta 535(1–2):297–307
Poletiko C (1988) Determination of Nickel-63. Environ Int 14(5):387–390
Numariji M, Oki Y, Suzuki T, Miura T, Taira M, Kanda Y, Kondo K (1994) Estimation of Nickel-63 in steel and copper activated at high energy accelerator facilities. Appl Radiat Isot 45(4):509–514
DIN German Institute for Standardization (2013) DIN 25457–4 Activity measurement methods in the clearance of radioactive substances and components of nuclear facilities – Part 4: contaminated and activated metal scrap. German Institute for Standardization, Berlin
ISO (2007) Standard ISO21238:2007 Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants. International Organization for Standardization, Geneva
Nuclear Regulatory Commission (1985) NUREG/CR-4101 Assay of long-lived radionuclides in Low-level wastes from power reactors. U. S. Nuclear Regulatory Commission.
IAEA (2021) IAEA Draft Safety Guide DS500 (Revision of Safety guide RS-G-1.7) Application of the Concept of Clearance. International Atomic Energy Agency, Vienna.
Health Physics Society (2013) ANSI/HPS N13.12–2013 Surface and volume radioactivity standards for clearance. Health Physics Society, US
UK Nuclear Industry Guide (2017) The UK nuclear industry good practice guide to: clearance and radiological sentencing: principles, process and practices. The Clearance and Exemptions Working Group, UK