A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

Kruth, 2007, Ann CIRP, 56, 730, 10.1016/j.cirp.2007.10.004

Rombouts M. PhD thesis. KU Leuven; 2006.

Yadroitsev, 2007, Appl Surf Sci, 253, 8064, 10.1016/j.apsusc.2007.02.088

Morgan, 2004, J Mater Sci, 39, 1195, 10.1023/B:JMSC.0000013875.62536.fa

Morgan, 2002, J Mater Sci, 37, 3093, 10.1023/A:1016185606642

Morgan, 2001, Rapid Prototyping J, 7, 159, 10.1108/13552540110395565

Yasa E, Deckers J, Kruth JP, Rombouts M, Luyten J. Experimental investigation of Charpy impact tests on metallic SLM parts. In: Proceedings of 4th International Conference on Advanced Research in Virtual and Rapid Prototyping. Leiria, Portugal; 2009. p. 207–14.

Yadroitsev I, Pavlov M, Bertrand Ph, Smurov I. Mechanical properties of samples fabricated by selective laser melting. In: 14èmes Assises Européennes du Prototypages & Fabrication Rapide, Paris; 2009.

Murr, 2009, J Mech Behav Biomed Mater, 2, 20, 10.1016/j.jmbbm.2008.05.004

Clare, 2008, Int J Mech Mater Des, 4, 181, 10.1007/s10999-007-9032-4

Hollander, 2006, Biomater, 27, 955, 10.1016/j.biomaterials.2005.07.041

Rochus, 2007, Acta Astronaut, 61, 352, 10.1016/j.actaastro.2007.01.004

Wong, 2007, Rapid Prototyping J, 13, 291, 10.1108/13552540710824797

Vandenbroucke, 2007, Direct digital manufacturing of complex dental prostheses, 109

Van Bael S, Vandenbroucke B, Kerckhofs G, Schrooten J, Kruth JP. Design and production of bone scaffolds with selective laser melting. In: Proceedings of 138th annual meeting & exhibition of the minerals. San Francisco: Metals & Materials Society (TMS); 2009.

Petzow, 1999

Boyer, 1994

Vandenbroucke B. PhD thesis. KU Leuven; 2008.

Römer G. PhD thesis. U Twente; 1999.

Yadroitsev, 2007, Appl Surf Sci, 254, 980, 10.1016/j.apsusc.2007.08.046

Verhaeghe, 2009, Acta Mater, 57, 6006, 10.1016/j.actamat.2009.08.027