A short review on basalt fiber reinforced polymer composites
Tóm tắt
Từ khóa
Tài liệu tham khảo
Ross, 2006, Basalt fibers: alternative to glass, Compos Technol, 12, 44
Colombo, 2012, Static and fatigue characterisation of new basalt fibre reinforced composites, Compos Struct, 94, 1165, 10.1016/j.compstruct.2011.10.007
Pavlovski, 2007, CNG cylinder manufacturers test basalt fibre, Reinf Plast, 51, 36, 10.1016/S0034-3617(07)70152-2
Dehkordi, 2013, The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid composites, Mater Des, 43, 283, 10.1016/j.matdes.2012.07.005
Ary Subagia, 2014, Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers, Compos Part B – Eng, 58, 251, 10.1016/j.compositesb.2013.10.027
Dehkordi, 2010, Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics, Mater Des, 31, 3835, 10.1016/j.matdes.2010.03.033
Han, 2012, The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites, Compos Part B – Eng, 45, 172, 10.1016/j.compositesb.2012.05.022
Paivaa, 2009, Mechanical and morphological characterizations of carbon fiber fabric reinforced epoxy composites used in aeronautical field, Mater Res, 12, 367, 10.1590/S1516-14392009000300019
Taketa, 2010, Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene, Compos Part A – Appl Sci, 41, 927, 10.1016/j.compositesa.2010.02.003
Hollaway, 1993
García, 2013, Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials, Compos Part B – Eng, 55, 528, 10.1016/j.compositesb.2013.07.016
Park, 1999, Performance improvement of carbon fiber polyethylene fiber hybrid composites, J Mater Sci, 34, 2903, 10.1023/A:1004647721380
Lopresto, 2011, Mechanical characterisation of basalt fibre reinforced plastic, Compos Part B – Eng, 42, 717, 10.1016/j.compositesb.2011.01.030
Wei, 2011, Degradation of basalt fibre and glass fibre/epoxy resin composites in seawater, Corros Sci, 53, 426, 10.1016/j.corsci.2010.09.053
Wang, 2013, Enhancement of basalt FRP by hybridization for long-span cable-stayed bridge, Compos Part B – Eng, 44, 184, 10.1016/j.compositesb.2012.06.001
Fiore, 2011, Glass-basalt/epoxy hybrid composites for marine applications, Mater Des, 32, 2091, 10.1016/j.matdes.2010.11.043
Borhan, 2012, Properties of glass concrete reinforced with short basalt fiber, Mater Des, 42, 265, 10.1016/j.matdes.2012.05.062
Larrinaga, 2014, Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress, Mater Des, 55, 66, 10.1016/j.matdes.2013.09.050
Banibayat, 2014, Variability of mechanical properties of basalt fiber reinforced polymer bars manufactured by wet-layup method, Mater Des, 56, 898, 10.1016/j.matdes.2013.11.081
Carmisciano, 2011, Basalt woven fiber reinforced vinylester composites: flexural and electrical properties, Mater Des, 32, 337, 10.1016/j.matdes.2010.06.042
Liu, 2006, Investigation of basalt fiber composite mechanical properties for applications in transportation, Polym Compos, 27, 41, 10.1002/pc.20162
Szabo, 2003, Static fracture and failure behavior of aligned discontinuous mineral fiber reinforced polypropylene composites, Polym Test, 22, 711, 10.1016/S0142-9418(03)00005-9
Das, 2001
Manikandan, 2012, Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites, Compos Part B – Eng, 43, 812, 10.1016/j.compositesb.2011.11.009
Lee, 2010, The tensile and thermal properties of modified CNT-reinforced basalt/epoxy composites, Mater Sci Eng A – Struct, 527, 6838, 10.1016/j.msea.2010.07.080
Zeng, 2012, Improving interlaminar fracture toughness of carbon fibre/epoxy laminates by incorporation of nano-particles, Compos Part B – Eng, 43, 90, 10.1016/j.compositesb.2011.04.036
An, 2012, Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties, Carbon, 50, 4130, 10.1016/j.carbon.2012.04.061
Kalam, 2005, Fatigue behaviour of oil palm fruit bunch fibre/epoxy and carbon fibre/epoxy composites, Compos Struct, 71, 34, 10.1016/j.compstruct.2004.09.034
Zhang, 2004, Comparison of short carbon fibre surface treatments on epoxy composites – I. Enhancement of the mechanical properties, Compos Sci Technol, 64, 2021, 10.1016/j.compscitech.2004.02.009
Artemenko, 2008, Polymer composite materials based on carbon, basalt and glass fibres, Fibre Chem, 40, 37, 10.1007/s10692-008-9010-0
Sim, 2005, Characteristics of basalt fiber as a strengthening material for concrete structures, Compos Part B – Eng, 36, 504, 10.1016/j.compositesb.2005.02.002
Sarasini, 2013, Hybrid composites based on aramid and basalt woven fabrics: impact damage modes and residual properties, Mater Des, 49, 290, 10.1016/j.matdes.2013.01.010
Farsani, 2014, Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene–clay nanocomposites, Mater Des, 53, 540, 10.1016/j.matdes.2013.07.012
Quagliarini, 2012, Tensile characterization of basalt fiber rods and ropes: a first contribution, Constr Build Mater, 34, 372, 10.1016/j.conbuildmat.2012.02.080
Yeboah, 2013, Pull-out behaviour of axially loaded Basalt Fibre Reinforced Polymer (BFRP) rods bonded perpendicular to the grain of glulam elements, Constr Build Mater, 38, 962, 10.1016/j.conbuildmat.2012.09.014
Raftery, 2014, Low-grade glued laminated timber beams reinforced using improved arrangements of bonded-in GFRP rods, Constr Build Mater, 52, 209, 10.1016/j.conbuildmat.2013.11.044
Lapko A, Urbański M. Experimental and theoretical analysis of deflections of concrete beams reinforced with basalt rebar. Arch Civ Mech Eng. http://dx.doi.org/10.1016/j.acme.2014.03.008.
Pearson, 2013, Long-term behaviour of prestressed basalt fibre reinforced polymer bars, Proc Eng, 54, 261, 10.1016/j.proeng.2013.03.024
Urbanski, 2013, Investigation on concrete beams reinforced with basalt rebars as an effective alternative of conventional R/C structures, Proc Eng, 57, 1183, 10.1016/j.proeng.2013.04.149
Zhu, 2014, Experimental study on the fire resistance of RC beams strengthened with near-surface-mounted high-Tg BFRP bars, Compos Part B – Eng, 60, 680, 10.1016/j.compositesb.2014.01.011
Mahroug, 2014, Experimental response and code modelling of continuous concrete slabs reinforced with BFRP bars, Compos Struct, 107, 664, 10.1016/j.compstruct.2013.08.029
Chlup, 2014, Influence of pyrolysis temperature on fracture response in SiOC based composites reinforced by basalt woven fabric, J Eur Ceram Soc, 10.1016/j.jeurceramsoc.2014.03.003
Sarasini, 2013, Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites, Composites Part A, 47, 109, 10.1016/j.compositesa.2012.11.021
Wang, 2010, Study on the friction and wear behavior of basalt fabric composites filled with graphite and nano-SiO2, Mater Des, 31, 1403, 10.1016/j.matdes.2009.08.041
Kim, 2011, Study on an oxygen plasma treatment of a basalt fiber and its effect on the interlaminar fracture property of basalt/epoxy woven composites, Compos Part B – Eng, 42, 499, 10.1016/j.compositesb.2010.12.001
Larrinaga, 2013, Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tension, Compos Part B – Eng, 55, 518, 10.1016/j.compositesb.2013.06.043
Sarasini, 2014, Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites, Compos Part B – Eng, 59, 204, 10.1016/j.compositesb.2013.12.006
Kim, 2014, Influence of seawater absorption on the vibration damping characteristics and fracture behaviors of basalt/CNT/epoxy multiscale composites, Compos Part B – Eng, 63, 61, 10.1016/j.compositesb.2014.03.010
Černý, 2014, Mechanical properties of partially pyrolysed composites with plain weave basalt fibre reinforcement, Ceram Int, 40, 7507, 10.1016/j.ceramint.2013.12.102
Sfarra, 2013, Falling weight impacted glass and basalt fibre woven composites inspected using non-destructive techniques, Compos Part B – Eng, 45, 601, 10.1016/j.compositesb.2012.09.078
Saravanan, 2006, Spinning the rocks – basalt fibres, J Inst Eng India – Part TX, 86, 39
http://en.wikipedia.org/wiki/Basalt.
Ary Subagia, 2014, Mechanical performance of multiscale basalt fiber–epoxy laminates containing tourmaline micro/nano particles, Compos Part B – Eng, 58, 611, 10.1016/j.compositesb.2013.10.034
Deak, 2009, Chemical composition and mechanical properties of basalt and glass fibers: a comparison, Text Res J, 79, 645, 10.1177/0040517508095597
Dorigato, 2012, Fatigue resistance of basalt fibers-reinforced laminates, J Compos Mater, 46, 1773, 10.1177/0021998311425620
Mingchao, 2008, Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites, J Reinf Plast Compos, 27, 393, 10.1177/0731684407084119
Kim, 2012, Effects of silane-modified carbon nanotubes on flexural and fracture behaviors of carbon nanotube-modified epoxy/basalt composites, Compos B Eng, 43, 2298, 10.1016/j.compositesb.2011.12.007
Czigány, 2006, Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study, Compos Sci Technol, 66, 3210, 10.1016/j.compscitech.2005.07.007
Zhang, 2012, Mechanical and thermal properties of basalt fiber reinforced poly(butylene succinate) composites, Mater Chem Phys, 133, 845, 10.1016/j.matchemphys.2012.01.105
Akinci, 2011, Wear behavior of basalt filled low density polyethylene composites, Appl Compos Mater, 19, 499, 10.1007/s10443-011-9208-9
Rosa, 2011, Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates, eXPRESS Polym Lett, 5, 449, 10.3144/expresspolymlett.2011.43
Rosa, 2011, Post-impact mechanical characterisation of glass and basalt woven fabric laminates, Appl Compos Mater, 19, 475, 10.1007/s10443-011-9209-8
Wang, 2008, Low velocity impact properties of 3D woven basalt/aramid hybrid composites, Compos Sci Technol, 68, 444, 10.1016/j.compscitech.2007.06.016
Belingardi, 2002, Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates, Int J Impact Eng, 27, 213, 10.1016/S0734-743X(01)00040-9
Sevkat, 2009, Drop-weight impact of plain-woven hybrid glass–graphite/toughened epoxy composites, Compos A Appl Sci Manuf, 40, 1090, 10.1016/j.compositesa.2009.04.028
Benevolenski, 2000, Instrumented perforation impact response of polypropylene composites with hybrid reinforcement flax/glass and flax/cellulose fibers, J Thermoplast Compos Mater, 13, 481, 10.1106/7PQW-D06A-MYU6-8692
Belingardi, 2008, Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates, Int J Impact Eng, 35, 609, 10.1016/j.ijimpeng.2007.02.005
Bledzki, 2007, Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites, eXPRESS Polym Lett, 1, 755, 10.3144/expresspolymlett.2007.104
Mertiny, 2009, Evaluation of glass and basalt fiber reinforcements for polymer composite pressure piping, J Pressure Vessel Technol, 131, 061407, 10.1115/1.4000360
Fukuda, 1982, A probabilistic theory of the strength of short-fibre composites with variable fibre length and orientation, J Mater Sci, 17, 1003, 10.1007/BF00543519
Templeton, 1990, Strength predictions of injection molding compounds, J Reinf Plast Compos, 9, 210, 10.1177/073168449000900301
Kurniawan, 2012, Atmospheric pressure glow discharge plasma polymerization for surface treatment on sized basalt fiber/polylactic acid composites, Compos Part B – Eng, 43, 1010, 10.1016/j.compositesb.2011.11.007
Balea, 2014, Mechanical behaviour of plain-knit reinforced injected composites: effect of inlay yarns and fibre type, Compos Part B – Eng, 56, 20, 10.1016/j.compositesb.2013.07.028
Huang, 2000, Micromechanical modeling approaches for the stiffness and strength of knitted fabric composites: a review and comparative study, Composites Part A, 31, 479, 10.1016/S1359-835X(99)00083-4
Leong, 1998, An investigation of the mechanical performance of weft-knit milano-rib glass/epoxy composites, Compos Sci Technol, 58, 239, 10.1016/S0266-3538(97)00128-0
Khondker, 2005, Impact and compression after-impact performance of weft-knitted glass textile composites, Composites Part A, 36, 638, 10.1016/j.compositesa.2004.07.006
Mouritz, 1999, Mode I interlaminar fracture toughness properties of advanced textile fibreglass composites, Composites Part A, 30, 859, 10.1016/S1359-835X(98)00197-3
Falconnet, 2002, Fracture toughness of weft-knitted fabric composites, Composites Part B, 33, 579, 10.1016/S1359-8368(02)00053-7
Pandita, 2002, Impact properties of weft knitted fabric reinforced composites, Compos Sci Technol, 62, 1113, 10.1016/S0266-3538(02)00057-X
Khondker, 2001, An investigation of the structure–property relationship of knitted composites, J Compos Mater, 35, 489, 10.1177/002199801772662127
Abounaim, 2009, Development of flat knitted spacer fabrics for composites using hybrid yarns and investigation of two-dimensional mechanical properties, Text Res J, 79, 596, 10.1177/0040517508101462
Leong, 1999, The effects of deforming knitted glass fabrics on the basic composite mechanical properties, J Mater Sci, 34, 2377, 10.1023/A:1004550329734
Martias, 2014, Effects of the addition of glass fibers, mica and vermiculite on the mechanical properties of a gypsum-based composite at room temperature and during a fire test, Compos Part B – Eng, 62, 37, 10.1016/j.compositesb.2014.02.019
Ozturk, 2007, Hot wear properties of ceramic and basalt fiber reinforced hybrid friction materials, Tribol Int, 40, 37, 10.1016/j.triboint.2006.01.027
Romhány, 2003, Tensile fracture and failure behavior of thermoplastic starch with unidirectional and cross-ply flax fiber reinforcements, Macromol Mater Eng, 288, 699, 10.1002/mame.200300040
Dogossy, 2006, Failure mode characterization in maize hull filled polyethylene composites by acoustic emission, Polym Test, 25, 353, 10.1016/j.polymertesting.2005.12.004
Czigany, 2005, Fracture and failure behavior of basalt fiber mat-reinforced vinylester/epoxy hybrid resins as a function of resin composition and fiber surface treatment, J Mater Sci, 40, 5609, 10.1007/s10853-005-1273-8
Newman, 2010, Failure mechanisms in composites reinforced with unidirectional Phormium leaf fibre, Composites Part A, 41, 353, 10.1016/j.compositesa.2009.11.001
Morent, 2008, Non-thermal plasma treatment of textiles, Surf Coat Technol, 202, 3427, 10.1016/j.surfcoat.2007.12.027
Botev, 1999, Mechanical properties and viscoelastic behavior of basalt fiber-reinforced polypropylene, J Appl Polym Sci, 74, 523, 10.1002/(SICI)1097-4628(19991017)74:3<523::AID-APP7>3.0.CO;2-R
Bashtannik, 2003, The effect of adhesion interaction on the mechanical properties of thermoplastic basalt plastics, Mech Compos Mater, 39, 85, 10.1023/A:1022943823622
Fiore, 2013, On the mechanical behavior of BFRP to aluminum AA6086 mixed joints, Compos Part B – Eng, 48, 79, 10.1016/j.compositesb.2012.12.009
Brik VB. Performance evaluation of basalt fibers and composite rebars as concrete reinforcement. Tech Res Report submitted to NCHRP-IDEA Project 45; 1999.
Brik VB. Advanced concept concrete using basalt fiber composite reinforcement. Tech Res Report submitted to NCHRP-IDEA Project 25; 1999.
Alomayri, 2013, Characterisation of cotton fibre-reinforced geopolymer composites, Compos Part B – Eng, 50, 1, 10.1016/j.compositesb.2013.01.013
Zhang, 2006, Impact behavior and microstructural characteristics of PVA fiber reinforced fly ash-geopolymer boards prepared by extrusion technique, J Mater Sci, 41, 2787, 10.1007/s10853-006-6293-5
Dias, 2005, Fracture toughness of geopolymeric concretes reinforced with basalt fibres, Cement Concr Compos, 27, 49, 10.1016/j.cemconcomp.2004.02.044
Li, 2009, Mechanical properties of basalt fibre reinforced geopolymeric concrete under impact loading, Mater Sci Eng, 505, 178, 10.1016/j.msea.2008.11.063
Bischoff, 1991, Compressive behavior of concrete at high strain rates, Mater Struct, 24, 425, 10.1007/BF02472016
Li, 2008, Dynamic mechanical properties of basalt fiber reinforced concrete using a split Hopkinson pressure bar, Acta Mater Comp Sinica, 25, 135
Reis, 2006, Fracture and flexural characterization of natural fiber-reinforced polymer concrete, Constr Build Mater, 20, 73, 10.1016/j.conbuildmat.2005.02.008
Silva, 2010, Physical and mechanical properties of durable sisal fibre–cement composites, Constr Build Mater, 24, 777, 10.1016/j.conbuildmat.2009.10.030
Silva, 2009, Cracking mechanisms in durable sisal fibre reinforced cement composites, Cement Concr Compos, 31, 721, 10.1016/j.cemconcomp.2009.07.004
Filho, 2000, Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites, Cement Concr Compos, 22, 127, 10.1016/S0958-9465(99)00039-6
Borri, 2013, Reinforcement of wood with natural fibers, Compos Part B – Eng, 53, 1, 10.1016/j.compositesb.2013.04.039
Fan, 2011, Experimental study on impact-mechanics properties of basalt fibre reinforced concrete, Adv Mater Res, 168–170, 1910
Wu, 2010, Recent developments in long-term performance of FRP composites and FRP-concrete interface, Adv Struct Eng, 3, 891, 10.1260/1369-4332.13.5.891
Wu, 2010, Tensile fatigue behaviour of FRP and hybrid FRP sheets, Compos B Eng, 41, 396, 10.1016/j.compositesb.2010.02.001
Marouani, 2012, Ageing of carbon/epoxy and carbon/vinylester composites used in the reinforcement and/or the repair of civil engineering structures, Compos B Eng, 43, 2020, 10.1016/j.compositesb.2012.01.001
Karbhari, 2007
Saadatmanesh, 2010, Environmental effects on mechanical properties of wet lay-up fiber reinforced polymer, ACI Mater J, 107, 267
Sun, 2002, Effect of chloride salt, freeze–thaw cycling and externally applied load on the performance of the concrete, Cem Concr Res, 32, 1859, 10.1016/S0008-8846(02)00769-X
Shi, 2013, Bond behavior between BFRP sheet and concrete substrate under the coupled effects of freeze–thaw cycling and sustained load, J Compos Constr, 17, 530, 10.1061/(ASCE)CC.1943-5614.0000349
Rivera, 2002, Cold-temperature and simultaneous aqueous environment related degradation of carbon/vinylester composites, Compos B Eng, 33, 17, 10.1016/S1359-8368(01)00058-0
Dutta, 1996, Low-temperature and freeze–thaw durability of thick composites, Compos B Eng, 27, 371, 10.1016/1359-8368(96)00007-8
Wu, 2011, Time-dependent deterioration of FRP bridge deck under freeze/thaw conditions, Compos B Eng, 42, 1226, 10.1016/j.compositesb.2011.02.010
Nardone, 2012, Tensile behavior of epoxy based FRP composites under extreme service conditions, Compos B Eng, 43, 1468, 10.1016/j.compositesb.2011.08.042
Shi, 2014, Tensile behavior of FRP and hybrid FRP sheets in freeze–thaw cycling environments, Compos Part B – Eng, 60, 239, 10.1016/j.compositesb.2013.11.026
Li, 2012, Freeze–thaw resistance of unidirectional fiber reinforced epoxy composites, J Appl Polym Sci, 123, 3781, 10.1002/app.34870
Green, 2007, FRP repair of concrete structures: performance in cold regions, Int J Mater Prod Technol, 28, 160, 10.1504/IJMPT.2007.011515
Diab, 2014, Bond strength and effective bond length of FRP sheets/plates bonded to concrete considering the type of adhesive layer, Compos Part B – Eng, 58, 618, 10.1016/j.compositesb.2013.10.075
Militky, 2002, Influence of thermal treatment on tensile failure of basalt fibers, Eng Fract Mech, 69, 1025, 10.1016/S0013-7944(01)00119-9
Wang, 2010, Integrated high-performance thousand-metre scale cable-stayed bridge with hybrid FRP cables, Compos Part B – Eng, 41, 166, 10.1016/j.compositesb.2009.09.001
Lim, 2014, Effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites, Carbon Lett, 15, 125, 10.5714/CL.2014.15.2.125
Vergara, 2014, Impact behaviour of basalt fibre reinforced furan composites cured under microwave and thermal conditions, Compos Part B – Eng, 66, 156, 10.1016/j.compositesb.2014.05.009
Sun, 2009, Transverse impact damage and energy absorption of 3-D multi-structured knitted composite, Compos Part B – Eng, 40, 572, 10.1016/j.compositesb.2008.12.005
Jin, 2010, A simplified microstructure model of bi-axial warp-knitted composite for ballistic impact simulation, Compos Part B – Eng, 41, 337, 10.1016/j.compositesb.2010.03.006
Landucci, 2009, Design and testing of innovative materials for passive fire protection, Fire Saf J, 44, 1103, 10.1016/j.firesaf.2009.08.004
Mouritz, 2013, Thermal–mechanical modelling of laminates with fire protection coating, Compos Part B – Eng, 48, 68, 10.1016/j.compositesb.2012.12.001
Correia, 2010, Fire protection systems for building floors made of pultruded GFRP profiles: Part 1: Experimental investigations, Compos Part B – Eng, 41, 617, 10.1016/j.compositesb.2010.09.018
Firmo, 2012, Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: protection systems with insulation of the anchorage zones, Compos Part B – Eng, 43, 1545, 10.1016/j.compositesb.2011.09.002
Palmieri, 2012, Experimental investigation on fire endurance of insulated concrete beams strengthened with near surface mounted FRP bar reinforcement, Compos Part B – Eng, 43, 885, 10.1016/j.compositesb.2011.11.061
Jiang, 2014, Polyetherimide nanocomposite foams as an ablative for thermal protection applications, Compos Part B – Eng, 58, 559, 10.1016/j.compositesb.2013.10.040
Nigro, 2014, Guidelines for flexural resistance of FRP reinforced concrete slabs and beams in fire, Compos Part B – Eng, 58, 103, 10.1016/j.compositesb.2013.10.007
Reddy BR, Ravi KM, Waugh BK. Compositions comprising melt-processed inorganic fibers and methods of using such compositions. US patent 7493968B2; 2009.
Reddy BR, Heathman JF. Cement compositions comprising high aspect ratio materials and methods of use in subterranean formations. US patent 8123852B2; 2012.
Hung, 2011, New generation of geopolymer composite for fire-resistance, vol. 4, 73
Wu, 2014, Mechanical, thermal expansion, and flammability properties of co-extruded wood polymer composites with basalt fiber reinforced shells, Mater Des, 60, 334, 10.1016/j.matdes.2014.04.010
Medvedyev, 2005, Basalt use in hot gas filtration, Filtration, 42, 34, 10.1016/S0015-1882(06)70844-8
Tsibulja, 2001
Johnson, 2003, Breathing new life into dust collection filters, Ceram Ind Mag, 39
Sinica, 2014, Impact of complex additive consisting of continuous basalt fibres and SiO2 microdust on strength and heat resistance properties of autoclaved aerated concrete, Constr Build Mater, 50, 718, 10.1016/j.conbuildmat.2013.10.027
Černý, 2009, Partially pyrolyzed composites with basalt fibres – Mechanical properties at laboratory and elevated temperatures, Composites Part A, 40, 1650, 10.1016/j.compositesa.2009.08.002
Haddad, 2008, Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete, Fire Saf J, 43, 334, 10.1016/j.firesaf.2007.11.002
Wei, 2010, Tensile behavior contrast of basalt and glass fibers after chemical treatment, Mater Des, 31, 4244, 10.1016/j.matdes.2010.04.009
Park, 1999, A study of interfacial aspects of epoxy-based composites reinforced with dual basalt and SiC fibres by means of the fragmentation and acoustic emission techniques, Compos Sci Technol, 59, 355, 10.1016/S0266-3538(98)00085-2
Shan, 2001, Environmental fatigue of unidirectional glass-carbon fiber reinforced hybrid composite, Composites Part B, 32, 355, 10.1016/S1359-8368(01)00014-2
Tsotsis, 2001, Aging of polymeric composite specimens for 5000h at elevated pressure and temperature, Compos Sci Technol, 61, 75, 10.1016/S0266-3538(00)00196-2
Berozashvili, 2001, Continuous reinforcing fibers are being offered for construction, civil engineering and other composites applications, Adv Mater Com News Compos Worldwide, 21, 5
Wei, 2010, Environmental resistance and mechanical performance of basalt and glass fibers, Mater Sci Eng A, 527, 4708, 10.1016/j.msea.2010.04.021
Huang, 2008, Tensile behaviors of quartz Aramid and glass filaments after NaOH treatment, Mater Des, 29, 1893, 10.1016/j.matdes.2008.04.025
Scheffler, 2009, Aging of alkali-resistant glass and basalt fibers in alkaline solutions: evaluation of the failure stress by Weibull distribution function, J Non Cryst Solids, 355, 2588, 10.1016/j.jnoncrysol.2009.09.018
Rybin, 2013, Alkali resistance, microstructural and mechanical performance of zirconia-coated basalt fibers, Cem Concr Res, 53, 1, 10.1016/j.cemconres.2013.06.002
Kumosa, 2001, An evaluation of the critical conditions for the initiation of stress corrosion cracking in unidirectional-glass/polymer composites, Compos Sci Technol, 61, 615, 10.1016/S0266-3538(00)00244-X
Nasir, 2012, Corrosion behaviour and crack formation mechanism of basalt fibre in sulphuric acid, Corros Sci, 64, 1, 10.1016/j.corsci.2012.06.028
Liu, 2006, Investigation of basalt fibre composite aging behaviour for applications in transportation, Polym Compos, 27, 475, 10.1002/pc.20215
Shokrieh, 2010, Stress corrosion cracking of basalt/epoxy composites under bending loading, Appl Compos Mater, 17, 121, 10.1007/s10443-009-9116-4
Baştürk, 2014, An analytical model for predicting the deflection of laminated basalt composite plates under dynamic loads, Compos Struct, 10.1016/j.compstruct.2014.05.018
Subramanian, 1980, Silane coupling agents in basalt-reinforced polyester composites, Int J Adhes Adhes, 1, 50, 10.1016/0143-7496(80)90035-4
Wang, 2009, Mechanical characteristics of fused cast basalt tube encased in steel pipe for protecting steel surface, Trans Nonferrous Met Soc China, 19, 935, 10.1016/S1003-6326(08)60381-7
Daood, 2014, Fuel additive technology – NOx reduction, combustion efficiency and fly ash improvement for coal fired power stations, Fuel, 10.1016/j.fuel.2014.04.032
Milman, 1996, Development and study of loadbearing heat insulation, Cryogenics, 36, 127, 10.1016/0011-2275(96)83815-X
Dorigato, 2012, Fatigue resistance of basalt fibers-reinforced laminates, J Compos Mater, 46, 1773, 10.1177/0021998311425620
Hao, 2010, Evaluation of thermal protective performance of basalt fibre nonwoven fabrics, J Therm Anal Calorim, 100, 551, 10.1007/s10973-009-0179-0
http://www.basfiber.com/automotive.
http://basaltfm.com/eng/nav/materials.html.
http://www.dostkimya.com/en/product-browser/staple-chopped-basalt-fiber/26.
Novitskii, 2004, An unwoven basalt-fibre material for the encasing of fibrous insulation: an alternative to glass cloth, Refract Ind Ceram, 45, 234, 10.1023/B:REFR.0000046504.53798.af
Kim, 2013, A study on the fracture toughness of seawater-absorbed carbon nanotube/epoxy/basalt composites, Carbon Lett, 14, 190, 10.5714/CL.2013.14.3.190
Novák, 2010, Artificial sowing of endangered dry grassland species into disused basalt quarries, Flora, 205, 179, 10.1016/j.flora.2009.03.003
Nunes, 2014, Evaluation of the natural fertilizing potential of basalt dust wastes from the mining district of Nova Prata (Brazil), J Clean Prod, 10.1016/j.jclepro.2014.04.032
Andrić, 2012, Specific characteristics of coating glazes based on basalt, Mater Des, 39, 9, 10.1016/j.matdes.2012.02.022
Poznyak, 2012, Basaltic and granitic rocks as components of ceramic mixes for interior wall tiles, Glass Ceram, 69, 262, 10.1007/s10717-012-9458-5
Kim, 2011, Flexural behavior of carbon nanotube-modified epoxy/basalt composites, Carbon Lett, 12, 177, 10.5714/CL.2011.12.3.177