A semi-physical thermodynamic transient rolling resistance model with nonlinear viscoelasticity
Springer Science and Business Media LLC - Trang 1-22 - 2023
Tóm tắt
Rolling resistance dictates a large part of the energy consumption of trucks. Therefore, it is necessary to have a sound understanding of the parameters affecting rolling resistance. This article proposes a semi-physical thermodynamic tyre rolling resistance model, which captures the essential properties of rolling resistance, such as transient changes due to temperature effects and the strain-amplitude dependency of the viscous properties. In addition, the model includes cooling effects from the surroundings. Both tyre temperature and rolling resistance are obtained simultaneously in the simulation model for each time step. The nonlinear viscoelasticity in rubber is modelled using the Bergström–Boyce model, where the viscous creep function is scaled with temperature changes. The cooling of the tyre is considered with both convective and radiative cooling. Moreover, the article explains different material parameters and their physical meaning. Additionally, examples of how the model could be used in parameter studies are presented.
Tài liệu tham khảo
Hyttinen, J., Ussner, M., Österlöf, R., Jerrelind, J., Drugge, L.: Effect of ambient and tyre temperature on truck tyre rolling resistance. Int. J. Automot. Technol. 23(6), 1651–1661 (2022). https://doi.org/10.1007/s12239-022-0143-6
Surcel, M.D., Michaelsen, J.: Evaluation of tractor-trailer rolling resistance reducing measures. SAE Tech. Pap. 2010-01–19 (2010). https://doi.org/10.4271/2010-01-1917
Ejsmont, J., Taryma, S., Ronowski, G., Swieczko-Zurek, B.: Influence of temperature on the tyre rolling resistance. Int. J. Automot. Technol. 19(1), 45–54 (2018). https://doi.org/10.1007/s12239$-$018$-$0005$-$4
Oswald, A.L., Browne, L.J.: The airflow field around an operating tire and its effect on tire power loss. SAE Tech. Pap. (1981). https://doi.org/10.4271/810166
Greiner, M.: Verfahren zur Prädiktion des Rollwiderstands bei variablen Betriebsparametern auf Basis standardisierter Rollwiderstandsmessungen. https://publikationen.bibliothek.kit.edu/1000091012 (2019). [Online]
Bode, O.: Der Einfluss von Wärmeverlusten auf den Rollwiderstand von Reifen, FAT-Schriftenreihe 325. Verband der Automobilindustrie (VDA), Hannover. vda.de/vda/de/aktuelles/publikationen/publication/fat-schriftenreihe-325 (2020). [Online]
Ejsmont, J., Ronowski, G., Owczarzak, W., Sommer, S.: Temperature influence on tire rolling resistance measurements quality. Int. J. Automot. Technol. 23(1), 109–123 (2022). https://doi.org/10.1007/s12239-022-0009-y
ISO 28580:2009 (2009)
Farroni, F., Mancinelli, N., Timpone, F.: A real-time thermal model for the analysis of tire/road interaction in motorcycle applications. Appl. Sci. 10(5), Article ID 1604 (2020). https://doi.org/10.3390/app10051604
Février, P., Fandard, G.: Thermal and mechanical tyre modelling for handling simulation. ATZ Worldw. 110(5), 26–31 (2008). https://doi.org/10.1007/bf03225006
Hyttinen, J., Ussner, M., Österlöf, R., Jerrelind, J., Drugge, L.: Truck tyre transient rolling resistance and temperature at varying vehicle velocities - measurements and simulations. Polym. Test. (2023). https://doi.org/10.1016/j.polymertesting.2023.108004
Greiner, M., Unrau, H.J., Gauterin, F.: A model for prediction of the transient rolling resistance of tyres based on inner-liner temperatures. Veh. Syst. Dyn. 56(1), 78–94 (2018). https://doi.org/10.1080/00423114.2017.1343955
Nielsen, L., Sandberg, T.: A New Model for Rolling Resistance of Pneumatic Tires. SAE Technical Paper Series (2002)
Mars, W.V., Luchini, J.R.: Analytical model for the transient rolling resistance behavior of tires. Tire Sci. Technol. 27(3), 161–175 (1999). https://doi.org/10.2346/1.2135982
Hentschke, R.: The Payne effect revisited. eXPRESS Polym. Lett. 11(4), 278–292 (2017). https://doi.org/10.3144/expresspolymlett.2017.28
Diani, J., Fayolle, B., Gilormini, P.: A review on the Mullins effect. Eur. Polym. J. 45, 601–612 (2009). https://doi.org/10.1016/j.eurpolymj.2008.11.017
Fröhlich, J., Niedermeier, W., Luginsland, H.-D.: The effect of filler–filler and filler–elastomer interaction on rubber reinforcement. Composites, Part A, Appl. Sci. Manuf. 36(4), 449–460 (2005)
Bergström, J.: Mechanics of Solid Polymers. Elsevier, Amsterdam (2015)
Österlöf, R., Wentzel, H., Kari, L.: A finite strain viscoplastic constitutive model for rubber with reinforcing fillers. Int. J. Plast. 87, 1–14 (2016)
Hyttinen, J., Österlöf, R., Drugge, L., Jerrelind, J.: Constitutive rubber model suitable for rolling resistance simulations of truck tyres. Proc. Inst. Mech. Eng., Part D, J. Automob. Eng. (2022). https://doi.org/10.1177/09544070221074108
Diani, J., Fayolle, B., Gilormini, P., Diani, J., Fayolle, B., Gilormini, P.: A review on the Mullins effect. Eur. Polym. J. 45, 601–612 (2009). https://doi.org/10.1016/j.eurpolymj.2008.11.017
Ydrefors, L.: The relationship between rolling resistance and tyre operating conditions, with a focus on tyre temperature. KTH Royal Institute of Technology (2022)
Davari, M.M., Jerrelind, J., Trigell, A.S., Drugge, L.: Extended brush tyre model to study rolling loss in vehicle dynamics simulations. Int. J. Veh. Des. 73(4), 255–280 (2017). https://doi.org/10.1504/IJVD.2017.083418
Dal, H., Kaliske, M.: Bergström-Boyce model for nonlinear finite rubber viscoelasticity: Theoretical aspects and algorithmic treatment for the FE method. Comput. Mech. 44(6), 809–823 (2009). https://doi.org/10.1007/s00466-009-0407-2
Bergström, J.S., Boyce, M.C.: Constitutive modeling of the large strain time-dependent behavior of elastomers. J. Mech. Phys. Solids 46(5), 931–954 (1998). https://doi.org/10.1016/S0022-5096(97)00075-6
Taryma, S., et al.: Road texture influence on tire rolling resistance. Key Eng. Mater. 597, 193–198 (2014). https://doi.org/10.4028/www.scientific.net/KEM.597.193
Wong, J.Y.: Theory of Ground Vehicles, 3 rd. Wiley, New York (2001)
Ejsmont, J., Sjögren, L., Świeczko-Żurek, B., Ronowski, G.: Influence of road wetness on tire-pavement rolling resistance. J. Civ. Eng. Archit. 9, 1302–1310 (2015). https://doi.org/10.17265/1934-7359/2015.11.004
Surcel, M.D., Bonsi, A.K.: The impact of lift axles on fuel economy and GHG emissions reduction. SAE Int. J. Commer. Veh. 8(2), 673–681 (2015). https://doi.org/10.4271/2015-01-2874
Nakajima, Y.: Advanced Tire Mechanics. Springer, Singapore (2019). https://doi.org/10.1007/978-981-13-5799-2
Aldhufairi, H.S., Olatunbosun, O.A.: Developments in tyre design for lower rolling resistance: a state of the art review. Proc. Inst. Mech. Eng., Part D, J. Automob. Eng. 232(14), 1865–1882 (2018). https://doi.org/10.1177/0954407017727195
Mandal, A., Pan, S., Mukherjee, S., Saha, A.K., Thomas, S., Sengupta, A.: Variations in specific heat and microstructure in natural rubber filled with different fillers as studied by differential scanning calorimetry. Polym. Biopolym. Phys. Chem. 2(1), 25–28 (2014). https://doi.org/10.12691/jpbpc-2-1-4
Namjoo, M., Golbakhshi, H.: Finite element analysis for estimating the effect of various working conditions on the temperature gradients created inside a rolling tire. Int. J. Eng. 27(12C), 1920–1927 (2014). https://doi.org/10.5829/idosi.ije.2014.27.12c.16
Qin, Y., Hiller, J.E.: Ways of formulating wind speed in heat convection significantly influencing pavement temperature prediction (2013). https://doi.org/10.1007/s00231-013-1116-0
Holzapfel, G.: Nonlinear Solid Mechanics: A Continuum Approach for Engineering. Wiley, New York (2000)
Reoroji, N., Vol, G.: Filler effects on temperature shift factors in viscoelastic properties of carbon black filled rubbers. Nihon Reoroji Gakkaishi 41(3), 137–144 (2013)
Österlöf, R., Wentzel, H., Kari, L.: An efficient method for obtaining the hyperelastic properties of filled elastomers in finite strain applications. Polym. Test. 41, 44–54 (2015)
Melly, S.K., Liu, L., Liu, Y., Leng, J.: A review on material models for isotropic hyperelasticity. Int. J. Mech. Syst. Dyn. 1(1), 71–88 (2021). https://doi.org/10.1002/msd2.12013
Daesa, C., Rodkwan, S.: Prediction of rolling resistance coefficient of retreaded truck tyres through numerical simulation. Maejo Int. J. Sci. Technol. 12(2), 152–166 (2018)
Mashadi, B., Ebrahimi-Nejad, S., Abbaspour, M.: A rolling resistance estimate using nonlinear finite element numerical analysis of a full three-dimensional tyre model. Proc. Inst. Mech. Eng., Part D, J. Automob. Eng. 233(1), 147–160 (2019). https://doi.org/10.1177/0954407018802733
Austrell, P.-E., Olsson, A.K.: Considering amplitude dependence during cyclic loading of elastomers using an equivalent viscoelastic approach. Polym. Test. 31(7), 909–915 (2012)
Bergström, J.S., Boyce, M.C.: Constitutive modeling of the time-dependent and cyclic loading of elastomers and application to soft biological tissues. Mech. Mater. 33, 523–530 (2001). https://doi.org/10.1016/S0167-6636(01)00070-9
Rafei, M., Ghoreishy, M.H.R., Naderi, G.: Computer simulation of tire rolling resistance using finite element method: effect of linear and nonlinear viscoelastic models. Proc. Inst. Mech. Eng., Part D, J. Automob. Eng. 233(11), 2746–2760 (2019). https://doi.org/10.1177/0954407018804117
Bergström, J.S., Boyce, M.C.: Deformation of elastomeric networks: relation between molecular level deformation and classical statistical mechanics models of rubber elasticity. Macromolecules 34(3), 614–626 (2001). https://doi.org/10.1021/ma0007942
Bergström, J.S., Boyce, M.C.: Large strain time-dependent behavior of filled elastomers. Mech. Mater. 32(11), 627–644 (2000). https://doi.org/10.1016/S0167-6636(00)00028-4
Browne, A.L., Wickliffe, L.E.: Parametric study of convective heat transfer coefficients at the tire surface. Tire Sci. Technol. 8(3–4), 37–67 (1980). https://doi.org/10.2346/1.2151020
Assaad, M.C., et al.: Thin-film heat flux sensor for measuring the film coefficient of rubber components of a rolling tire. Tire Sci. Technol. 36(4), 275–289 (2008). https://doi.org/10.2346/1.2999702