A semi-dynamic model of active pipe-embedded building envelope for thermal performance evaluation

ASHRAE, 1997

Building Energy Saving Centre of Tsinghua University, 2013

Braham, 1988, 45

Bunn, 1991, Thermodeck: the thermal flywheel, Build. Serv. J., 13, 41

Babiak, 2013, Efficient cooling and heating of office buildings in the UK by means of TAB system and its life cycle cost compared to other HVAC. ID: 815

Gang, 2013, Predictive ANN models of ground heat exchanger for the control of hybrid ground source heat pump systems, Appl. Energy, 112, 1146, 10.1016/j.apenergy.2012.12.031

Henze, 2004, Evaluation of optimal control for active and passive building thermal storage, Int. J. Therm. Sci., 43, 173, 10.1016/j.ijthermalsci.2003.06.001

Kilkis, 1992, Enhancement of heat pump performance by using radiant floor heating systems, Am. Soc. Mech. Eng. Adv. Energy Syst. Div. Publ. AES, 28, 119

Kilkis, 1995, A simplified model for the design of radiant in-slab heating panels, ASHRAE Trans., 101, 210

Koschenz, 1999, Interaction of an air system with concrete core conditioning, Energy Build., 30, 139, 10.1016/S0378-7788(98)00081-4

Meierhans, 1993, Slab cooling and earth coupling, ASHRAE Trans., 99, 511

Meierhans, 1996, Room air conditioning by means of overnight cooling of the concrete ceiling, ASHRAE Trans., 102, 693

Pisello, 2013, Analysis of a cool roof system for reducing cooling loads and improving cooling system efficiency. ID: 842

Ren, 1998, A ventilated slab thermal storage system model, Build. Environ., 33, 43, 10.1016/S0360-1323(97)00030-9

Sasia, 2013, “Nearly zero energy building” real solutions. ID: 409

Song, 2013, Optimized operation strategy of a thermally activated building system (TABS) in a campus building. ID: 572

Schnurr, 1970, Heat transfer design data for optimization of snow melting systems, ASHRAE Trans., 76, 257

Sun, 2014, Evaluation of elliptical finned-tube heat exchanger performance using CFD and response surface methodology, Int. J. Therm. Sci., 75, 45, 10.1016/j.ijthermalsci.2013.07.021

Winwood, 1997, Advanced fabric energy storage I: review, Build. Serv. Eng. Res. Technol., 18, 1, 10.1177/014362449701800101

Weber, 2005, An optimized RC-network for thermally activated building components, Build. Environ., 40, 1, 10.1016/j.buildenv.2004.04.012

Wang, 2006, Simplified building model for transient thermal performance estimation using GA-based parameter identification, Int. J. Therm. Sci., 45, 419, 10.1016/j.ijthermalsci.2005.06.009

Xie, 2012, An active pipe-embedded building envelope for utilizing low-grade energy sources, J. Cent. South Univ. Technol., 19, 1663, 10.1007/s11771-012-1190-3

Xu, 2010, Active pipe-embedded structures in buildings for utilizing low-grade energy sources: a review, Energy Build., 42, 1567, 10.1016/j.enbuild.2010.05.002

Xu, 2008, A simplified dynamic model for existing buildings using CTF and thermal network models, Int. J. Therm. Sci., 47, 1249, 10.1016/j.ijthermalsci.2007.10.011

Yao, 2004, Hourly cooling load prediction by a combined forecasting model based on analytic hierarchy process, Int. J. Therm. Sci., 43, 1107, 10.1016/j.ijthermalsci.2004.02.009

Zhu, 2012, Study of dynamic thermal performance of active pipe-embedded building envelopes based on frequency-domain finite difference method

Zhang, 1986, A numerical study of heat transfer in a hedonic radiant ceiling panel, vol. 62, 31

Zhang, 1986, An experimental study of the transient response of a radiant panel ceiling and enclosure, ASHRAE Trans., 92, 85

Zhang, 1987, A semi-analytical formulation of heat transfer from structures with embedded tubes, vol. 78 (9–12), 17

Xu, 2013, Study of dynamic thermal Performance of active pipe-embedded building envelopes based on frequency-domain finite-difference method, Trans. Electr. Electron. Circuits Syst., 3, 65

Zhu, 2014, Development of dynamic simplified thermal models of active pipe-embedded building envelopes using genetic algorithm, Int. J. Therm. Sci., 76, 258, 10.1016/j.ijthermalsci.2013.09.008

Zhu, 2013, Optimal simplified thermal models of active pipe-embedded building envelope based on frequency-domain finite-difference method using genetic algorithm. ID: 1093

Zhu, 2010, A simplified dynamic model of building structures integrated with shaped-stabilized phase change materials, Int. J. Therm. Sci., 49, 1722, 10.1016/j.ijthermalsci.2010.03.020