A review on the migration and transformation of heavy metals influence by alkali/alkaline earth metals during combustion

George, 2020, Emission control strategies of hazardous trace elements from coal-fired power plants in China, Global J Environ Sci, 93, 66 Udayanga, 2018, Fate and distribution of heavy metals during thermal processing of sewage sludge, Fuel, 226, 721, 10.1016/j.fuel.2018.04.045 Li, 2019, Evaluation of chemical speciation and environmental risk levels of heavy metals during varied acid corrosion conditions for raw and solidified/stabilized MSWI fly ash, Waste Manag, 87, 407, 10.1016/j.wasman.2019.02.033 Yi, 2008, Fine particle and trace element emissions from an anthracite coal-fired power plant equipped with a bag-house in China, Fuel, 87, 10, 10.1016/j.fuel.2007.10.009 EPA-HQ-OAR-2009-0234, National emission standards for hazardous air pollutants from coal-and-oil fired electric utility steam generating units and standards of performance for fossil-fuel-fired electric utility, industrial-commercial-institutional, and small industrial-commercial-institutional steam generating units. GB 3095—2012, Ambient air quality standard. Zhang, 2019, Effect of chlorine, sulfur, moisture and ash content on the partitioning of As, Cr, Cu, Mn, Ni and Pb during bituminous coal and pickling sludge co-combustion, Fuel, 239, 601, 10.1016/j.fuel.2018.11.061 Hu, 2015, Mechanism of chromium oxidation by alkali and alkaline earth metals during municipal solid waste incineration, Proc Combust Inst, 35, 2397, 10.1016/j.proci.2014.08.029 Xu, 2016 Mou, 2001, Toxicity mechanism of different chemical forms of selenium, Foreign Med, 202 Jiang, 2017, Heavy metal migration characteristics of fly ash in fluidized bed incinerator for municipal sewage sludge, Therm Energy Power Eng, 32, 92 Li, 2013, Simultaneous adsorption of Na and Pb compounds by kaolinite, J Eng Thermophys, 34, 168 Yang, 2020, Study on comprehensive evaluation of slagging characteristics of high-alkali coal blending combustion from Hami Area, Coal Sci Technol, 48, 207 Yang, 2019, Experimental study on fouling characteristics for blending ratio of high alkali coal in Hami area, Coal Sci Technol, 47, 214 Karin, 2007, Fate of Cu, Cr, and As during combustion of impregnated wood with and without peat additive, Environ Sci Technol, 41, 6534, 10.1021/es0630689 Qin, 2017, Effects of adding CaO on the release and transformation of arsenic and sulfur during coal pyrolysis, J Fuel Chem Technol, 45, 147 Li, 2020, Study on competition mechanism of alkali metals and heavy metals in collaborative combustion of sludge and alkali coal, Chin J Power Eng, 40, 349 Mei, 2020, Research progress of the influence of alkali metals and alkaline earth metals on coal thermal chemical conversion, J Fuel Chem Technol, 48, 385 Wendt, 2009, High-temperature sorbents for Hg, Cd, Pb, and other trace metals: Mech Appl, Fuel, 89, 894, 10.1016/j.fuel.2009.01.028 Liu, 2015, An experimental and thermodynamic equilibrium investigation of the Pb, Zn, Cr, Cu, Mn and Ni partitioning during sewage sludge incineration, J Environ Sci, 35, 43, 10.1016/j.jes.2015.01.027 Wang, 2016, Effect of multi-factors interaction on trace lead equilibrium during municipal solid waste incineration, J Mater Cycles Waste Manage, 18, 287, 10.1007/s10163-014-0332-0 Wang, 1999, Effects of chlorides on emissions of toxic compounds in waste incineration: Study on partitioning characteristics of heavy metal, Chemosphere, 38, 1833, 10.1016/S0045-6535(98)00398-1 Yu, 2012, Thermodynamics study of effects of alkali metals on mercury transformation during co-combustion of biomass with coal, Chin Soc Electr Eng, 32, 96 Yao, 2016 Wei, 2005, Behaviour of gaseous chlorine and alkali metals during biomass thermal utilisation, Fuel, 84, 841, 10.1016/j.fuel.2004.11.022 Lin, 2005, Emission characteristics of organic and heavy metal pollutants in fluidized bed incineration during the agglomeration/defluidization process, Combust Flame, 143, 139, 10.1016/j.combustflame.2005.05.009 Chen, 2019, Analysis of heavy metals fixation and associated energy consumption during sewage sludge combustion: Bench scale and pilot test, J Cleaner Prod, 229, 1243, 10.1016/j.jclepro.2019.04.358 Wang, 2014, Control of inhalable particulate lead emission from incinerator using kaolin in two addition modes, Fuel Process Technol, 119, 228, 10.1016/j.fuproc.2013.11.012 Si, 2014, Effect of kaolin additive on PM 2.5 reduction during pulverized coal combustion: Importance of sodium and its occurrence in coal, Appl Energy, 114, 434, 10.1016/j.apenergy.2013.10.002 Yao, 2009, Using sorbents to control heavy metals and particulate matter emission during solid fuel combustion, Particuology, 7, 477, 10.1016/j.partic.2009.06.004 Gale, 2003, High-temperature interactions between multiple-metals and kaolinite, Combust Flame, 133, 383, 10.1016/S0010-2180(03)00004-X Gale, 2005, In-furnace capture of cadmium and other semi-volatile metals by sorbents, Proc Combust Inst, 30, 2999, 10.1016/j.proci.2004.08.197 Davis, 2000, Competition for sodium and toxic metals capture on sorbents, Aerosol Sci Technol, 32, 142, 10.1080/027868200303849 Jagodzinska, 2019, The impact of additives on the retention of heavy metals in the bottom ash during RDF incineration, Energy, 183, 854, 10.1016/j.energy.2019.06.162 Contreras, 2008, Arsenic interactions during co-combustion processes based on thermodynamic equilibrium calculations, Fuel, 88, 539, 10.1016/j.fuel.2008.09.028 Zhou, 2018, Retention mechanisms of ash compositions on toxic elements (Sb, Se and Pb) during fluidized bed combustion, Fuel, 213, 98, 10.1016/j.fuel.2017.10.111 Zhou, 2017, Effect of ash composition on the partitioning of arsenic during fluidized bed combustion, Fuel, 204, 91, 10.1016/j.fuel.2017.05.048 Zhao, 2012 Chen, 2015, Findings of proper temperatures for arsenic capture by CaO in the simulated flue gas with and without SO2, Chem Eng J, 267, 201, 10.1016/j.cej.2015.01.035 Li, 2007, Simultaneous removal of SO2 and trace As2O3 from flue gas: Mechanism, kinetics study, and effect of main gases on arsenic capture, Environ Sci Technol, 41, 10.1021/es0618494 Jadhav, 2001, Capture of gas-phase arsenic oxide by lime: Kinetic and mechanistic studies, Environ Sci Technol, 35, 794, 10.1021/es001405m Diaz, 2004, Retention of arsenic and selenium compounds using limestone in a coal gasification flue gas, Environ Sci Technol, 38, 899, 10.1021/es034344b Song, 2020, Retention of arsenic in coal combustion flue gas at high temperature in the presence of CaO, Fuel, 259, 116249.1, 10.1016/j.fuel.2019.116249 Xu, 2013, Se Capture by a CaO-ZnO Composite sorbent during the combustion of se-rich stone coal, Energy Fuels, 27, 6880, 10.1021/ef4013449 Fan, 2017, SeO2 adsorption on CaO surface: DFT study on the adsorption of a single SeO2 molecule, Appl Surf Sci, 413, 366, 10.1016/j.apsusc.2017.03.196 Fan, 2017, SeO2 adsorption on CaO surface: DFT and experimental study on the adsorption of multiple SeO2 molecules, Appl Surf Sci, 420, 465, 10.1016/j.apsusc.2017.04.233 Li, 2006, Simultaneous removal of SO2 and trace SeO2 from flue gas: Effect of product layer on mass transfer, Environ Sci Technol, 40, 10.1021/es052381s Li, 2006, Simultaneous removal of SO2 and trace SeO2 from flue gas: Effect of SO2 on selenium capture and kinetics study, Environ Sci Technol, 40, 7919, 10.1021/es061709u Kuo, 2011, Effect of particle agglomeration on heavy metals adsorption by Al- and Ca-based sorbents during fluidized bed incineration, Fuel Process Technol, 92, 2089, 10.1016/j.fuproc.2011.06.014 Chen, 2013, Elucidating the mechanism of Cr(VI) formation upon the interaction with metal oxides during coal oxy-fuel combustion, J Hazard Mater, 261, 260, 10.1016/j.jhazmat.2013.07.023 Hu, 2018, Further insight into the formation and oxidation of CaCr2O4 during solid fuel combustion, Environ Sci Technol, 52, 2385, 10.1021/acs.est.7b05538 Yao, 2003, Screening of sorbents and capture of lead and cadmium compounds during sewage sludge combustion, Fuel, 83, 1001 Zha, 2018, Effect of mineral reaction between calcium and aluminosilicate on heavy metal behavior during sludge incineration, Fuel, 229, 241, 10.1016/j.fuel.2018.05.015 Zhou, 2014, Effects of sorbents on the partitioning and speciation of cu during municipal solid waste incineration, Chin J Chem Eng, 22, 1347, 10.1016/j.cjche.2014.09.030 Chen, 2019, Heavy metals volatilization characteristics and risk evaluation of co-combusted municipal solid wastes and sewage sludge without and with calcium-based sorbents, Ecotoxicol Environ Saf, 182, 10.1016/j.ecoenv.2019.109370 Bartonova, 2014, Effect of CaO on retention of S, Cl, Br, As, Mn, V, Cr, Ni, Cu, Zn, W and Pb in bottom ashes from fluidized-bed coal combustion power station, J Environ Sci, 26, 1429, 10.1016/j.jes.2014.05.008 Zha, 2020, Desulfurization using limestone during sludge incineration in a fluidized bed furnace: Increased risk of particulate matter and heavy metal emissions, Fuel, 273, 10.1016/j.fuel.2020.117614 Lopes, 2005, Heavy metals behavior during monocombustion and co-combustion of sewage sludge, Environ Eng Sci, 22, 205, 10.1089/ees.2005.22.205 Guo, 2018, Effect of alkalic metal on the combustion characteristics, agglomeration/defluidization and heavy metals emission during fluidized bed municipal solid waste (MSW) incineration, Environ Eng, 36, 132 Gao, 2019, Investigation of reducing particulate matter (PM) and heavy metals pollutions by adding a novel additive from metallurgical dust (MD) during coal combustion, J Hazard Mater, 373, 335, 10.1016/j.jhazmat.2019.03.057 Kuo, 2009, Effects of agglomeration processes on the emission characteristics of heavy metals under different waste compositions and the addition of Al and Ca inhibitors in fluidized bed incineration, Energy Fuels, 23, 4325, 10.1021/ef9003945 Zhao, 2018, Emission characteristic and transformation mechanism of hazardous trace elements in a coal-fired power plant, Fuel, 214, 597, 10.1016/j.fuel.2017.09.093