A review on quality control in additive manufacturing
Tóm tắt
The usage of additive manufacturing (AM) technology in industries has reached up to 50 per cent as prototype or end-product. However, for AM products to be directly used as final products, AM product should be produced through advanced quality control process, which has a capability to be able to prove and reach their desire repeatability, reproducibility, reliability and preciseness. Therefore, there is a need to review quality-related research in terms of AM technology and guide AM industry in the future direction of AM development.
This paper overviews research progress regarding the QC in AM technology. The focus of the study is on manufacturing quality issues and needs that are to be developed and optimized, and further suggests ideas and directions toward the quality improvement for future AM technology. This paper is organized as follows. Section 2 starts by conducting a comprehensive review of the literature studies on progress of quality control, issues and challenges regarding quality improvement in seven different AM techniques. Next, Section 3 provides classification of the research findings, and lastly, Section 4 discusses the challenges and future trends.
This paper presents a review on quality control in seven different techniques in AM technology and provides detailed discussions in each quality process stage. Most of the AM techniques have a trend using
This paper is limited to reviewing of only seven techniques of AM technology, which includes photopolymer vat processes, material jetting processes, binder jetting processes, extrusion-based processes, powder bed fusion processes, directed energy deposition processes and sheet lamination processes. This paper would impact on the improvement of quality control in AM industries such as industrial, automotive, medical, aerospace and military production.
Additive manufacturing technology, in terms of quality control has yet to be reviewed.
Từ khóa
Tài liệu tham khảo
2012, Investigation post processing techniques to reduce the surface roughness of fused deposition modeled parts, International Journal of Mechanical Engineering & Technology (IJMET), 3, 531
1996, Structural quality of parts processed by fused deposition, Rapid Prototyping Journal, 2, 4, 10.1108/13552549610732034
2012, Quantification of surface roughness of parts processed by laminated object manufacturing, Journal of Materials Processing Technology, 212, 339, 10.1016/j.jmatprotec.2011.08.013
2009, Representation of surface roughness in fused deposition modeling, Journal of Materials Processing Technology, 209, 5593, 10.1016/j.jmatprotec.2009.05.016
2002, Anisotropic material properties of fused deposition modeling ABS, Rapid Prototyping Journal, 8, 248, 10.1108/13552540210441166
2007, A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process, Optics and Lasers in Engineering, 45, 1115, 10.1016/j.optlaseng.2007.06.010
2001, Critical parameters influencing the quality of prototypes in fused deposition modelling, Journal of Materials Processing Technology, 118, 385, 10.1016/S0924-0136(01)00980-3
2006, Assessment of surface quality on textured FDM prototypes, Rapid Prototyping Journal, 12, 35, 10.1108/13552540610637255
2016, Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes, Robotics and Computer-Integrated Manufacturing, 37, 57, 10.1016/j.rcim.2015.06.005
Beaman, J., Atwood, C., Bergman, T., Bourell, D., Hollister, S. and Rosen, D. (2004), “Assessment of European research and development in additive”, Subtractive Manufacturing, Final Report from WTEC Panel, available at: http://wtec.org/additive/report/welcome.htm
2003, Mechanical characterization of parts fabricated using fused deposition modeling, Rapid Prototyping Journal, 9, 252, 10.1108/13552540310489631
1994, Temperature controlled selective laser sintering, 277
2013, Study on influential factors for process monitoring and control in laser aided additive manufacturing, Journal of Materials Processing Technology, 213, 463, 10.1016/j.jmatprotec.2012.10.006
2006, Characterization of the process control for the direct laser metallic powder deposition, Surface and Coatings Technology, 201, 2676, 10.1016/j.surfcoat.2006.05.006
2007, Development and qualification of a novel laser-cladding head with integrated sensors, International Journal of Machine Tools and Manufacture, 47, 555, 10.1016/j.ijmachtools.2006.05.010
2015, Roughness prediction in coupled operations of fused deposition modeling and barrel finishing, Journal of Materials Processing Technology, 219, 181, 10.1016/j.jmatprotec.2014.12.021
2016, Design for manufacturing of surfaces to improve accuracy in fused deposition modeling, Robotics and Computer-Integrated Manufacturing, 37, 103, 10.1016/j.rcim.2015.07.005
2013, Bone tissue engineering using 3D printing, Materials Today, 16, 496, 10.1016/j.mattod.2013.11.017
2007, Possibilities of utilizing 3DP technology for foundry mould making, Archives of Foundry Engineering, 7, 65
2002, Surface roughness visualisation for rapid prototyping models, Computer-Aided Design, 34, 717, 10.1016/S0010-4485(01)00201-9
2008, A study on surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method, Journal of Materials Processing Technology, 202, 574, 10.1016/j.jmatprotec.2007.10.024
2008, Extruder path generation for curved layer fused deposition modeling, Computer-Aided Design, 40, 235, 10.1016/j.cad.2007.10.014
2003, Laser path planning of burn-out rule for LOM process, Rapid Prototyping Journal, 9, 201, 10.1108/13552540310489587
2003, Automatic fabrication for bridged laminated object manufacturing (LOM) process, Journal of Materials Processing Technology, 140, 179, 10.1016/S0924-0136(03)00710-6
2003, An experimental investigation of the tensile strength of parts produced by laminated object manufacturing (LOM) process, CIRP Journal of Manufacturing Systems, 32, 319
1999, Surface roughness modelling of the Helisys laminated object manufacturing (LOM) process, 141
2007, 3D printing of hydroxyapatite: effect of binder concentration in pre-coated particle on part strength, Materials Science and Engineering: C, 27, 914, 10.1016/j.msec.2006.11.004
2001, Slurry-based 3DP and fine ceramic components, 216
2009, Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology, Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 108, 661, 10.1016/j.tripleo.2009.05.023
2003, Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth, Journal of Biomedical materials Research Part B: Applied Biomaterials, 64, 65
2006, Temperature evolution during stereolithography building with a commercial epoxy resin, Polymer Engineering & Science, 46, 493, 10.1002/pen.20488
2014, 3D opportunity: additive manufacturing paths to performance, innovation, and growth, Deloitte Review, 14
2009, Human microvasculature fabrication using thermal inkjet printing technology, Biomaterials, 30, 6221, 10.1016/j.biomaterials.2009.07.056
2012, Thermal inkjet printing in tissue engineering and regenerative medicine, Recent Patents on Drug Delivery & Formulation, 6, 149, 10.2174/187221112800672949
2010, Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells, Biotechnology and Bioengineering, 106, 963, 10.1002/bit.22762
2009, Rapid prototyping of electrically conductive components using 3D printing technology, Journal of Materials Processing Technology, 209, 5281, 10.1016/j.jmatprotec.2009.03.015
2010, Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution, Annual Review of Materials Research, 40, 395, 10.1146/annurev-matsci-070909-104502
2004, Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography, Tissue Engineering, 10, 1316, 10.1089/ten.2004.10.1316
2013, Thermographic in-situ process monitoring of the electron-beam melting technology used in additive manufacturing, SPIE Defense, Security, and Sensing, International Society for Optics and Photonics, 87050K
2009, Direct inkjet printing of dental prostheses made of zirconia, Journal of Dental Research, 88, 673, 10.1177/0022034509339988
2013, Electron beam additive manufacturing of titanium components: properties and performance, Journal of Manufacturing Science and Engineering, 135, 061016, 10.1115/1.4025773
2013, Process parameters investigation of a laser-generated single clad for minimum size using design of experiments, Rapid Prototyping Journal, 19, 452, 10.1108/RPJ-06-2011-0062
2014, Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering, PloS One, 9, e108252, 10.1371/journal.pone.0108252
2015, Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering, Ceramics International, 41, 8320, 10.1016/j.ceramint.2015.03.004
2008, Geometry control of the deposited layer in a nonplanar laser cladding process using a variable structure controller, Journal of Manufacturing Science and Engineering, 130, 031003, 10.1115/1.2823085
1998, Simulation of laminated object manufacturing (LOM) with variation of process parameters, 407
1995, Expert system-based selection of the preferred direction of build for rapid prototyping processes, Journal of Intelligent Manufacturing, 6, 339, 10.1007/BF00124677
2009, Experimental study aiming to enhance the surface finish of fused deposition modeled parts, CIRP Annals-Manufacturing Technology, 58, 189, 10.1016/j.cirp.2009.03.071
2010, Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling, CIRP Annals-Manufacturing Technology, 59, 247, 10.1016/j.cirp.2010.03.074
2012, Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography, Biomaterials, 33, 3824, 10.1016/j.biomaterials.2012.01.048
2014, Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
2012, Parametric optimization in electrochemical machining of EN-31 steel based on grey relation approach, Applied Mechanics and Materials, 110/116, 1649
2014, Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences, Analytical Chemistry, 86, 3240, 10.1021/ac403397r
2014, Fabrication of micro open structure using 3D laser scanning method in nano-stereolithography, 299
2010, Fabrication of three-dimensional scaffolds for heterogeneous tissue engineering, Biomedical Microdevices, 12, 721, 10.1007/s10544-010-9425-2
2007, Development of an effective three dimensional fabrication technique using inkjet technology for tissue model samples, AATEX, 14, 689
1999, Video Monitoring and Control of the LENS Process
2015, Design control for clinical translation of 3D printed modular scaffolds, Annals of Biomedical Engineering, 43, 774, 10.1007/s10439-015-1270-2
2003, Sensing, modeling and control for laser-based additive manufacturing, International Journal of Machine Tools and Manufacture, 43, 51, 10.1016/S0890-6955(02)00163-3
2011, Development of monitoring and control system for laser remanufacturing, Applied Mechanics and Materials, 44/47, 81
2009, Slice data based support generation algorithm for fused deposition modeling, Tsinghua Science & Technology, 14, 223, 10.1016/S1007-0214(09)70096-3
2003, Numerical analysis of a mask type stereolithography, pprocess using a dynamic finite-element method, The International Journal of Advanced Manufacturing Technology, 21, 649, 10.1007/s00170-002-1388-x
2007, An image-based feature tracking algorithm for real-time measurement of clad height, Machine Vision and Applications, 18, 343, 10.1007/s00138-006-0066-7
2010, Research on accurate droplet generation for micro-droplet deposition manufacture, The International Journal of Advanced Manufacturing Technology, 49, 535, 10.1007/s00170-009-2403-2
2015, Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes, Journal of Materials Processing Technology, 226, 280, 10.1016/j.jmatprotec.2015.07.012
2009, A neural network solution for LOM process performance, The International Journal of Advanced Manufacturing Technology, 43, 1214, 10.1007/s00170-008-1800-2
2007, An experimental investigation of the surface roughness of parts produced by LOM process, Rapid Prototyping Journal, 13, 17, 10.1108/13552540710719172
2007, Investigation of LOM process quality using design of experiments approach, Rapid Prototyping Journal, 13, 316, 10.1108/13552540710824823
2010, Scheduling and process planning for multiple material stereolithography, Rapid Prototyping Journal, 16, 232, 10.1108/13552541011049243
2012, Error detection in laser beam melting systems by high resolution imaging
2010, Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication, Journal of Micromechanics and Microengineering, 20, 125010, 10.1088/0960-1317/20/12/125010
2004, 3D FE simulation for temperature evolution in the selective laser sintering process, International Journal of Machine Tools and Manufacture, 44, 117, 10.1016/j.ijmachtools.2003.10.019
1991, Material incress manufacturing by rapid prototyping techniques, CIRP Annals-Manufacturing Technology, 40, 603, 10.1016/S0007-8506(07)61136-6
2007, On-line monitoring and process control in selective laser melting and laser cutting, 23
1999, Deposition strategies and resulting part stiffnesses in fused deposition modeling, Journal of Manufacturing Science and Engineering, 121, 93, 10.1115/1.2830582
2012, 3D micro-structures by piezoelectric inkjet printing of gold nanofluids, Journal of Micromechanics and Microengineering, 22, 055022, 10.1088/0960-1317/22/5/055022
1997, Determining fabrication orientations for rapid prototyping with stereolithography apparatus, Computer-Aided Design, 29, 53, 10.1016/S0010-4485(96)00049-8
2005, Optimization of rapid prototyping parameters for production of flexible ABS object, Journal of Materials Processing Technology, 169, 54, 10.1016/j.jmatprotec.2005.02.259
2008, Effects of the cladding parameters on the deposition efficiency in pulsed Nd: YAG laser cladding, Journal of Materials Processing Technology, 202, 321, 10.1016/j.jmatprotec.2007.09.024
2007, Poly (propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters, Biomacromolecules, 8, 1077, 10.1021/bm060834v
2010, Optimization method to fabrication orientation of parts in fused deposition modeling rapid prototyping, 416
2003, A new approach of online waste removal process for laminated object manufacturing (LOM), Journal of Materials Processing Technology, 140, 136, 10.1016/S0924-0136(03)00690-3
2013, Application and performance of 3D printing in nanobiomaterials, Journal of Nanomaterials, 2013, 13
2011, Design of an optical system for the in situ process monitoring of selective laser melting (SLM), Physics Procedia, 12, 683, 10.1016/j.phpro.2011.03.085
Low, S.C. and Ake, B.E. (2004), “Thermocouple control system for selective laser sintering part bed temperature control”, Google Patents.
2008, 3DP process for fine mesh structure printing, Powder Technology, 187, 11, 10.1016/j.powtec.2007.12.017
2013, Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices, Journal of Materials Processing Technology, 213, 947, 10.1016/j.jmatprotec.2012.12.015
2015, Development of functional devices using micro/nano stereolithography and moulding techniques, International Polymer Science and Technology, 42, T7, 10.1177/0307174X1504200402
2005, Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits, IEEE Transactions on Electronics Packaging Manufacturing, 28, 265, 10.1109/TEPM.2005.852542
2012, Lightweight metal cellular structures via indirect 3D printing and casting, 162
2010, A review on stereolithography and its applications in biomedical engineering, Biomaterials, 31, 6121, 10.1016/j.biomaterials.2010.04.050
1994, Video microscopy of selective laser sintering, 34
2015, Analysis and correction of defects within parts fabricated using powder bed fusion technology, Surface Topography: Metrology and Properties, 3, 034002
2013, Automatic feedback control in electron beam melting using infrared thermography
2009, A study of melt flow analysis of an ABS-iron composite in fused deposition modelling process, Tsinghua Science & Technology, 14, 29, 10.1016/S1007-0214(09)70063-X
2015, 3D microscopy for microfabrication quality control, SPIE OPTO, International Society for Optics and Photonics, 937607
2008, 3D Micro-fabrication by inkjet 3D biofabrication for 3D tissue engineering, International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, 451
2003, Real time adaptive slicing for fused deposition modelling, International Journal of Machine Tools and Manufacture, 43, 61, 10.1016/S0890-6955(02)00164-5
2003, Improvement of surface finish by staircase machining in fused deposition modeling, Journal of Materials Processing Technology, 132, 323, 10.1016/S0924-0136(02)00953-6
2012, A review on various approach for process parameter optimization of fused deposition modeling (FDM) process and Taguchi approach for optimization, International Journal of Engineering Research and Applications, 2, 361
2012, Compressive properties of FDM rapid prototypes treated with a low cost chemical finishing, Research Journal of Applied Sciences, Engineering and Technology, 4, 3838
1999, Part orientation in stereolithography, The International Journal of Advanced Manufacturing Technology, 15, 674, 10.1007/s001700050118
2012, Evaluations of temperature measurements by near-infrared thermography in powder-based electron-beam additive manufacturing, 761
2016, Optimization of fused deposition modeling process using teaching-learning-based optimization algorithm, Engineering Science and Technology, an International Journal, 19, 587, 10.1016/j.jestch.2015.09.008
1995, Surface deviation modeling of LMT processes–a comparative analysis, 59
2010, 3D printing based on imaging data: review of medical applications, International Journal of Computer Assisted Radiology and Surgery, 5, 335, 10.1007/s11548-010-0476-x
2005, Numerical simulation of deposition process for a new 3DP printhead design, Journal of Materials Processing Technology, 161, 509, 10.1016/j.jmatprotec.2004.07.090
2003, Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method, Journal of Materials Processing Technology, 141, 51, 10.1016/S0924-0136(02)01112-3
2008, Surface laser sintering of exothermic powder compositions, Journal of Thermal Analysis and Calorimetry, 91, 427, 10.1007/s10973-007-8353-8
2008, Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction, Journal of Cranio-Maxillofacial Surgery, 36, 443, 10.1016/j.jcms.2008.04.003
2015, MultiFab: a machine vision assisted platform for multi-material 3D printing, ACM Transactions on Graphics ( Graphics), 34, 129
2012, Complex analysis of laser cladding based on comprehensive optical diagnostics and numerical simulation, Physics Procedia, 39, 743, 10.1016/j.phpro.2012.10.096
2013, The effects of 3D printed molds on metal castings, 827
1998, Thermomechanical analysis of the laminated object manufacturing (LOM) process, Rapid Prototyping Journal, 4, 26, 10.1108/13552549810197541
2009, Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method, Materials & Design, 30, 4243, 10.1016/j.matdes.2009.04.030
2010, Parametric appraisal of mechanical property of fused deposition modelling processed parts, Materials & Design, 31, 287, 10.1016/j.matdes.2009.06.016
2012, Experimental investigation and empirical modelling of FDM process for compressive strength improvement, Journal of Advanced Research, 3, 81, 10.1016/j.jare.2011.05.001
1995, Determination of optimal orientation based on variable slicing thickness in layered manufacturing, ASME Winter Annual Meeting
Stratasys. (2016), “Finishing processes”, available at: www.stratasys.com/solutions/finishing-processes/smoothing-fdm-parts (accessed 16 July 2016).
2012, Additive manufacturing technologies: technology introduction and business implications, Frontiers of Engineering: Reports on Leading-Edge Engineering From the 2011 Symposium-, 19
2008, Effect of processing conditions on the bonding quality of FDM polymer filaments, Rapid Prototyping Journal, 14, 72, 10.1108/13552540810862028
2014, A review on process monitoring and control in metal-based additive manufacturing, Journal of Manufacturing Science and Engineering, 136, 060801, 10.1115/1.4028540
2001, Thermal experiments in direct metal laser sintering
2004, Optimum part deposition orientation in fused deposition modeling, International Journal of Machine Tools and Manufacture, 44, 585, 10.1016/j.ijmachtools.2003.12.004
2015, Data driven approach to quality assessment of 3D printed electronic products, 38th International Spring Seminar on Electronics Technology (ISSE), 300
2006, A mechatronics approach to laser powder deposition process, Mechatronics, 16, 631, 10.1016/j.mechatronics.2006.05.002
2008, Three-dimensional reconstruction and rapid prototyping of femur bone using multiple digital X-rays, Journal of Medical Engineering & Technology, 32, 30, 10.1080/03091900600747096
2013, Multiple material additive manufacturing–part 1: a review: this review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials, Virtual and Physical Prototyping, 8, 19, 10.1080/17452759.2013.778175
2013, Investigation of residual stresses induced during the selective laser melting process, Key Engineering Materials, 554/557, 1828, 10.4028/www.scientific.net/KEM.554-557.1828
2011, Critical parameters effecting the rapid prototyping surface finish, Journal of Mechanical Engineering and Automation, 1, 17
2009, Experimental and numerical study of the LENS rapid fabrication process, Journal of Manufacturing Science and Engineering, 131, 041019, 10.1115/1.3173952
2001, A process planning method for improving build performance in stereolithography, Computer-Aided Design, 33, 65, 10.1016/S0010-4485(00)00064-6
2003, Cell and organ printing 1: protein and cell printers, The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology, 272, 491
2012, A review of additive manufacturing, ISRN Mechanical Engineering, 2012
2011, Controlled positioning of cells in biomaterials–approaches towards 3D tissue printing, Journal of Functional Biomaterials, 2, 119, 10.3390/jfb2030119
2006, Viability and electrophysiology of neural cell structures generated by the inkjet printing method, biomaterials, 27, 3580
2014, Selective laser melting of Ti6Al4V alloy for biomedical applications: temperature monitoring and microstructural evolution, Journal of Alloys and Compounds, 583, 404, 10.1016/j.jallcom.2013.08.183
2006, Numerical modeling of the thermal behavior during the LENS® process, Materials Science and Engineering: A, 428, 47, 10.1016/j.msea.2006.04.079
2006, Indirect fabrication of collagen scaffold based on inkjet printing technique, Rapid Prototyping Journal, 12, 229, 10.1108/13552540610682741
2009, Novel drug delivery devices for providing linear release profiles fabricated by 3DP, International Journal of Pharmaceutics, 370, 160, 10.1016/j.ijpharm.2008.12.008
2012, A review of thermal analysis methods in laser sintering and selective laser melting
2011, Development of multi-material mask-image-projection-based stereolithography for the fabrication of digital materials, Annual Solid Freeform Fabrication Symposium