A review on polymer heat exchangers for HVAC&R applications

Ahmadi, 2004, Synthetic routes, properties and future applications of polymer-layered silicate nanocomposites, Journal of Material Science, 39, 1919, 10.1023/B:JMSC.0000017753.90222.96

Ahmed, 1990, A review of particulate reinforcement theories for polymer composites, Journal of Material Science, 25, 4922, 10.1007/BF00580110

Bahadur, 2004, Thermal design and optimization of staggered polymer pin fin natural convection heat sinks, Inter Society Conference on Thermal Phenomena, 268

Bigg, 1986, Thermally conductive polymer compositions, Polymer Composites, 7, 125, 10.1002/pc.750070302

Bigg, 1989, Applications of polymeric materials for condensing heat exchangers, Polymeric Engineering and Science, 29, 1111, 10.1002/pen.760291607

Bigg, 1995, Thermal conductivity of heterophase polymer compositions, Advances in Polymer Science, 119, 1, 10.1007/BFb0021279

Boudenne, 2004, Thermophysical properties of polypropylene-aluminum composites, Journal of Polymer Science part B, 42, 722, 10.1002/polb.10713

Bourouni, 1997, Experimental investigation of evaporation performance of a desalination prototype using aero-evapo-condensation process, Desalination, 114, 111, 10.1016/S0011-9164(98)00003-4

Breuer, 2004, Big returns from small fibers: A review of polymer carbon nanotube composites, Polymer Composites, 25, 630, 10.1002/pc.20058

Brouwers, 1996, Heat transfer, condensation and fog formation in crossflow plastic heat exchangers, International Journal of Heat Mass Transfer, 39, 391, 10.1016/0017-9310(95)00113-N

Bunning, 2003, Polyurethane-infiltrated carbon foams: a coupling of thermal and mechanical properties, Journal of Applied Polymer Science, 87, 2348, 10.1002/app.11918

Burns, 2001, Condensation studies using cross-corrugated polymer film compact heat exchangers, Applied Thermal Engineering, 21, 495, 10.1016/S1359-4311(00)00063-6

Chang, 2005, Resin infiltrated multi-functional carbon foam, Proceedings of the International SAMPE Symposium and Exhibition, 50, 2397

Chen, 2002, Ultra high thermal conductivity polymer composites, Carbon, 40, 359, 10.1016/S0008-6223(01)00112-9

Cheng, 2005, Experimental study of heat transfer and pressure drop characteristics of air/water and air-steam/water heat exchange in a polymer compact heat exchanger, Heat Transfer Engineering, 26, 18, 10.1080/01457630590897033

Davidson, 1998

Deronzier, 1997, Plate heat exchanger in liquid crystal polymer, Applied Therm. Engineering, 17, 799, 10.1016/S1359-4311(96)00086-5

Dobbs, G., Freihaut, J., 2006. Plastic oil cooler. US patent 7152670 B2.

El-Dessouky, 1999, Plastic compact heat exchangers for single effect desalination systems, Desalination, 122, 271, 10.1016/S0011-9164(99)00048-X

Freeman, 2005, Mechanical performance of polysulfone, polybutylene and polyamide 6/6 in hot chlorinated water, Journal of Solar Energy, 79, 624, 10.1016/j.solener.2005.07.003

Gao, 2004, Clay polymer composites: the story, Materials Today, 50, 10.1016/S1369-7021(04)00509-7

Gurdal, 1999

Harris, 2002, Fabrication, modeling and testing of micro-cross flow heat exchangers, Journal of Microelectromechanical Systems, 11, 726, 10.1109/JMEMS.2002.806025

Jacobi, A.M., Park, Y., Zhong, Y., Michna, G., Xia, Y., 2005. High performance heat exchangers for air conditioning and refrigeration applications (non-circular tubes). ARTI-CR21/605-20021-01, Final Report, July 2005.

Jia, 2001, An experimental study on vapor condensation of wet flue gas in a plastic heat exchanger, Heat Transfer - Asian Research, 30, 571, 10.1002/htj.10000

Jordan, 2005, Experimental trends in nanocomposites—a review, Material Science and Engineering A, 393, 1, 10.1016/j.msea.2004.09.044

Krupa, 2001, Physical properties of thermoplastic/graphite composites, European Polymer Journal, 37, 2159, 10.1016/S0014-3057(01)00115-X

Krupa, 2004, Electrically and thermally conductive polyethylene/graphite composites and their mechanical properties, Synthetic Metals, 145, 245, 10.1016/j.synthmet.2004.05.007

LeBaron, 1999, Polymer-layered silicate nanocomposites—an overview, Applied Clay Science, 15, 11, 10.1016/S0169-1317(99)00017-4

Leigh, 1989, Capital cost reductions in absorption chillers, ASHRAE Transactions, 95, 939

Li, 2004, Heat transfer enhancement using shaped polymer tubes: fin analysis, Journal of Heat Transfer, 126, 211, 10.1115/1.1683663

Liu, 2000, Thermal analysis of polymer heat exchangers for solar water heating: a case study, Journal of Solar Energy Engineering, 122, 84, 10.1115/1.1288027

Lowenstein, A., Sibilia, M., 1993. A low-cost thin-film absorber/evaporator for an absorption chiller, Final Report, May 1992–April 1993. Gas Research Inst., Chicago, IL.

Lowenstein, A.I. Sibilia, M.J., 1999. Thin plastic-film heat exchanger for absorption chillers. US patent 5992508.

Ma, 2002, Influence of processing conditions of polymer film on dropwise condensation heat transfer, International Journal of Heat Mass Transfer, 45, 3405, 10.1016/S0017-9310(02)00059-5

Mamunya, 2002, Electrical and thermal conductivity of polymers filled with metal powders, European Polymer Journal, 38, 1887, 10.1016/S0014-3057(02)00064-2

Marotta, 2003, The development of a bonded fin graphite/epoxy heat sink for high performance, Advances in Electronic Packaging, 2, 139

Miller, 2003, Thermally conductive thermoplastics, Advanced Materials and Processes, 34

Morcos, 1995, Performance analysis of a plastic shell and tube heat exchanger, Journal of Elastomers and Plastics, 27, 200, 10.1177/009524439502700208

Nielsen, 1974, Vol. 2

Norley, J., Chen, G.G., 2002. High performance, lightweight graphite heat sinks/spreaders, Proceedings of PCIM 2002, Nürnberg, Germany.

Norley, 2001, The development of a natural graphite heat-spreader, Seventeenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 107, 10.1109/STHERM.2001.915157

Norley, J., Tzeng, J.-W., Klug, J., 2003. Graphite-based heat sink. US Patent 6503626.

Norley, 2005, Graphite heatsinks: Like copper without the weight, Power Electronics Technology, 31, 76

Nysten, 1990, Composites based on thermally hyperconductive carbon fibres, Composites, 21, 339, 10.1016/0010-4361(90)90349-2

Raman, 2000, A review of polymer materials for solar water heating systems, Journal of Solar Energy Engineering, 122, 92, 10.1115/1.1288214

Patel, 2000, Design, construction and performance of plastic heat exchangers for sub-Kelvin use, Cryogenics, 40, 91, 10.1016/S0011-2275(00)00006-0

Reay, 1989, The use of polymers in heat exchangers, Heat Recovery Systems & CHP, 9, 209, 10.1016/0890-4332(89)90004-5

Rousse, 2000, Heat recovery in greenhouses: a practical solution, Applied Thermal Engineering, 20, 687, 10.1016/S1359-4311(99)00048-4

Saman, 2001, Modeling and performance analysis of a cross-flow type plate heat exchanger for dehumidification/cooling, Solar Energy, 70, 361, 10.1016/S0038-092X(00)00148-1

Saman, 2002, An experimental study of a cross flow type plate heat exchanger for dehumidification/cooling, Official Journal of AIRAH, 26

Schou, 1997, Wall resistance in graphite-block heat exchangers, Heat Transfer Engineering, 18, 39, 10.1080/01457639708939900

Schwartz, 1997

Serkan Tekce, 2007, Effect of particle shape on thermal conductivity of copper reinforced polymer composites, Journal of Reinforced Plastics and Composites, 26, 113, 10.1177/0731684407072522

Shives, G., Norley, J., Smalc, M., Chen, G., Capp, J., 2004. Comparative thermal performance evaluation of graphite/epoxy fin heat sinks. Thermomechanical Phenomena in Electronic Systems—Proceedings of the Intersociety Conference 1, pp. 410–417.

Thostenson, 2001, Advances in the science and technology of carbon nanotubes and their composites: a review, Composites Science and Technology, 61, 1899, 10.1016/S0266-3538(01)00094-X

Ting, 1995, Light weight, highly thermally conductive composites for space radiators, Ceramic Engineering and Science Proceedings, 16, 279, 10.1002/9780470314715.ch30

Tzeng, 2000

Van Der Geld, 2001, Geometry adaptations to improve the performance of compact polymer heat exchangers, Transactions IChemE: Part A, 79, 357, 10.1205/026387601750282463

Wang, 2005, Scaling in polymer tubes and interpretation for use in solar water heating systems, Journal of Solar Energy Engineering, 127, 3, 10.1115/1.1823492

Weber, 2003, Thermally conductive nylon 6.6 and polycarbonate based resins—I. synergistic effects of carbon fillers, Journal of Applied Polymer Science, 88, 112, 10.1002/app.11571

Wharry, 2002, Fluoropolymer heat exchangers, Metal Finishing, 100, 752, 10.1016/S0026-0576(02)82075-X

Wu, 2004, Polymers for solar domestic hot water: long term performance of PB and Nylon 6.6 Tubing in hot water, Journal of Solar Energy Engineering, 126, 581, 10.1115/1.1638786

Zaheed, 2004, Review of polymer compact heat exchangers, with special emphasis on a polymer film unit, Applied Thermal Engineering, 24, 2323, 10.1016/j.applthermaleng.2004.03.018

Xu, 2006, Thermal behavior of single-walled carbon nanotube polymer–matrix composites, Composites: Part A, 37, 114, 10.1016/j.compositesa.2005.04.009

Zakardas, D., Li, B., Sirkar, K., 2005. Polymeric hollow fiber heat exchanger (PHFHEs): a new type of compact heat exchanger for low temperature applications. Proceedings of the 2005 ASME Heat Transfer Conference, pp. HT2005–72590.

Zweben, 2004, Emerging high-volume applications for advanced thermally conductive materials, Proceedings of the International SAMPE Symposium and Exhibition, 49, 4046

Zweben, 2004, New material options for high-power diode laser packaging, Proceedings of the SPIE The International Society for Optical Engineering, 5336, 166, 10.1117/12.529177

Zweben, 2006, Thermal materials solve power electronics challenges, Power Electronics Technology, 32, 40