A review on moisture damages of hot and warm mix asphalt and related investigations

Ait-Kadi, 1996, Polymer blends for enhanced asphalt binders, Polym. Eng. Sci., 36, 1724, 10.1002/pen.10568

Airey, 2008, The influence of aggregate, filler and bitumen on asphalt mixture moisture damage, Constr. Build. Mater., 22, 2015, 10.1016/j.conbuildmat.2007.07.009

Aksoy, 2005, Effects of various additives on the moisture damage sensitivity of asphalt mixtures, Constr. Build. Mater., 19, 11, 10.1016/j.conbuildmat.2004.05.003

Al-Barrak, 1982

Al-Qadi, 2006, Adhesion of hot-poured crack sealants to aggregates

Al-Swailmi, 1992, Evaluation of water damage of asphalt Concrete mixtures using the environmental conditioning system (Ecs)(with discussion), J. Assoc. Asphalt Paving Technol., 61

ALARM, 2006

Alvarez, 2012, Analysis of asphalt-aggregate systems based on measurements of surface free energy, Dyna Rev.Fac.Nac.Minas, 79, 111

Amelian, 2014, Moisture susceptibility evaluation of asphalt mixes based on image analysis, Constr. Build. Mater., 63, 294, 10.1016/j.conbuildmat.2014.04.012

Apeagyei, 2014, Observation of reversible moisture damage in asphalt mixtures, Constr. Build. Mater., 60, 73, 10.1016/j.conbuildmat.2014.02.033

Arabani, 2010, Using the surface free energy method to evaluate the effects of polymeric aggregate treatment on moisture damage in hot-mix asphalt, J. Mater. Civ. Eng., 23, 802, 10.1061/(ASCE)MT.1943-5533.0000228

Arabani, 2012, Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method, J. Mater. Civ. Eng., 24, 889, 10.1061/(ASCE)MT.1943-5533.0000455

Arambula, 2007, Influence of air void distribution on the moisture susceptibility of asphalt mixes, J. Mater. Civ. Eng., 19, 655, 10.1061/(ASCE)0899-1561(2007)19:8(655)

Aschenbrener, 1993

Asthana, 2000, Wettability, spreading, and interfacial phenomena in high-temperature coatings, JOM-e, 52, 1

Attia, 2010, Modeling the effect of moisture on resilient modulus of untreated reclaimed asphalt pavement, Transp. Res. Rec. J. Transp. Res. Board, 2167, 30, 10.3141/2167-04

Bagampadde, 2007, Laboratory studies on stripping at bitumen/substrate interfaces using FTIR-ATR, J. Mater. Sci., 42, 3197, 10.1007/s10853-006-0181-x

Bagampadde, 2004, Classical and contemporary aspects of stripping in bituminous mixes, Road Mater. Pavement Des., 5, 7, 10.1080/14680629.2004.9689961

Ban, 2011, Integrated experimental-numerical approach for estimating material-specific moisture damage characteristics of binder-aggregate interface, Transp. Res. Rec. J. Transp. Res. Board, 2209, 9, 10.3141/2209-02

Bausano, 2009, Transitioning from AASHTO T283 to the simple performance test using moisture conditioning, J. Mater. Civ. Eng., 21, 73, 10.1061/(ASCE)0899-1561(2009)21:2(73)

Besamusca, 2012, The search for simple tests to assess the complex properties of adhesion and durability of adhesion

Bhasin, 2009, Application of microcalorimeter to characterize adhesion between asphalt binders and aggregates, J. Mater. Civ. Eng., 21, 235, 10.1061/(ASCE)0899-1561(2009)21:6(235)

Bhasin, 2007, Surface free energy to identify moisture sensitivity of materials for asphalt mixes, Transp. Res. Rec. J. Transp. Res. Board, 2001, 37, 10.3141/2001-05

Birgisson, 2004, Microstructure and fracture in asphalt mixtures using a boundary element approach, J. Mater. Civ. Eng., 16, 116, 10.1061/(ASCE)0899-1561(2004)16:2(116)

Blackman, 2013, The development of a novel test method to assess the durability of asphalt road–pavement materials, Int. J. Adhesi. Adhesi., 42, 1, 10.1016/j.ijadhadh.2012.10.013

Breakah, 2009, Integration of moisture sensitivity testing with Gyratory mix design and mechanistic-empirical pavement design, J. Transp. Eng., 135, 852, 10.1061/(ASCE)0733-947X(2009)135:11(852)

Caro, 2008, Moisture susceptibility of asphalt mixtures, Part 1: mechanisms, Int. J. Pavement Eng., 9, 81, 10.1080/10298430701792128

Caro, 2008, Moisture susceptibility of asphalt mixtures, Part 2: characterisation and modelling, Int. J. Pavement Eng., 9, 99, 10.1080/10298430701792144

Caro, 2009, Coupled micromechanical model of moisture-induced damage in asphalt mixtures, J. Mater. Civ. Eng., 22, 380, 10.1061/(ASCE)MT.1943-5533.0000031

Chen, 2008, Evaluation of moisture damage in hot mix asphalt using simple performance and superpave indirect tensile tests, Constr. Build. Mater., 22, 1950, 10.1016/j.conbuildmat.2007.07.014

Cheng, 2003, Moisture damage evaluation of asphalt mixtures by considering both moisture diffusion and repeated-load conditions, Transp. Res. Rec. J. Transp. Res. Board, 1832, 42, 10.3141/1832-06

Cheng, 2011, Moisture susceptibility of warm-mix asphalt mixtures containing nanosized hydrated lime, J. Mater. Civ. Eng., 23, 1552, 10.1061/(ASCE)MT.1943-5533.0000308

Cho, 2010, The mechanisms of moisture damage in asphalt pavement by applying chemistry aspects, KSCE J. Civ. Eng., 14, 333, 10.1007/s12205-010-0333-z

Collop, 2007, Effects of pressure and aging in SATS test, J. Transp. Eng., 133, 618, 10.1061/(ASCE)0733-947X(2007)133:11(618)

Copeland, 2007, Moisture sensitivity of modified asphalt binders: factors influencing bond strength, Transp. Res. Rec. J. Transp. Res. Board, 1998, 18, 10.3141/1998-03

Cui, 2009, On dynamic pore pressure in moisture damage of asphalt pavement

Curtis, 1992

D'angelo, 2003, Material production, mix design, and pavement design effects on moisture damage

Dong, 2008, The effect of water on pavement response based on 3D FEM simulation and Experiment evaluation. Pavements and materials: characterization, modeling, and simulation

Ensley, 1984, Asphalt—aggregate bonding energy measurements by microcalorimetric methods, Thermochim. Acta, 77, 95, 10.1016/0040-6031(84)87050-1

Estakhri, 2010

Field, 1967, Stripping in asphaltic concrete mixes: observations and test procedures, Can. Tech. Asph. Assoc. Proc., 12

Gharaybeh, 1987

Graf, 1986, Factors affecting moisture susceptibility of asphalt concrete mixes, Proc. Assoc. Asph. Paving Technol., 55

Haghshenas, 2015, A mathematical model for predicting stripping potential of Hot Mix Asphalt, Constr. Build. Mater., 75, 488, 10.1016/j.conbuildmat.2014.11.041

Hagos, 2008

Hajj, 2011, Impact of lime application method on ravelling and moisture sensitivity in HMA mixtures, Int. J. Pavement Eng., 12, 149, 10.1080/10298436.2010.535539

Hammons, 2006, Detection of stripping in hot-mix asphalt, Transp. Res. Rec. J. Transp. Res. Board, 1949, 20, 10.3141/1949-03

Hamzah, 2012, Development of dynamic asphalt stripping machine for better prediction of moisture damage on porous asphalt in the field

Hamzah, 2013, Laboratory simulation of the clogging behaviour of single-layer and two-layer porous asphalt, Road Mater. Pavement Des., 14, 107, 10.1080/14680629.2012.749803

Hamzah, 2013, Determination of the optimum binder content of warm mix asphalt incorporating rediset using response surface method, Constr. Build. Mater., 47, 1328, 10.1016/j.conbuildmat.2013.06.023

Hamzah, 2014, Quantification of moisture sensitivity of warm mix asphalt using image analysis technique, J. Clean. Prod., 68, 200, 10.1016/j.jclepro.2013.12.072

Hefer, 2007, Bitumen surface energy characterization by inverse gas chromatography, J. Test. Eval., 35, 233

Hicks, 1991

Howson, 2009

Huang, 2010, Laboratory evaluation of moisture susceptibility of hot-mix asphalt containing cementitious fillers, J. Mater. Civ. Eng., 22, 667, 10.1061/(ASCE)MT.1943-5533.0000064

Hunter, 2001

Huurman, 2010, Unravelling porous asphalt Concrete towards a mechanistic material design tool, Road Mater. Pavement Des., 11, 583, 10.1080/14680629.2010.9690295

Isacsson, 1993, Portland cement as an anti-stripping additive in bituminous road bases, vol. 1, 349

Iskender, 2012, Field and laboratory performance comparison for asphalt mixtures with different moisture conditioning systems, Constr. Build. Mater., 27, 45, 10.1016/j.conbuildmat.2011.08.019

Jacobs, 1996, Characterization of fracture in asphaltic mixes based on a molecular approach, Transp. Res. Rec. J. Transp. Res. Board, 1535, 22, 10.3141/1535-04

Jeon, 1990

Johnson, 2002

Kanitpong, 2005, Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures, Transp. Res. Rec. J. Transp. Res. Board, 1901, 33, 10.3141/1901-05

Kanitpong, 2008, Evaluation of HMA moisture damage in Wisconsin as it relates to pavement performance, Int. J. Pavement Eng., 9, 9, 10.1080/10298430600965122

Kanitpong, 2012, Investigation on the effects of gradation and aggregate type to moisture damage of warm mix asphalt modified with Sasobit, Int. J. Pavement Eng., 13, 451, 10.1080/10298436.2011.565058

Karlsson, 2003, Application of FTIR-ATR to characterization of bitumen rejuvenator diffusion, J. Mater. Civ. Eng., 15, 157, 10.1061/(ASCE)0899-1561(2003)15:2(157)

Kavussi, 2012, Laboratory evaluation of moisture damage and rutting potential of WMA foam mixes, Int. J. Pavement Eng., 13, 415, 10.1080/10298436.2011.597859

Khan, 2013, Moisture damage in asphalt mixtures using the modified SATS test and image analysis, Constr. Build. Mater., 43, 165, 10.1016/j.conbuildmat.2013.02.003

Kiggundu, 1988

Kim, 2004, Effect of moisture damage on material properties and fatigue resistance of asphalt mixtures, Transp. Res. Rec. J. Transp. Res. Board, 1891, 48, 10.3141/1891-07

Kim, 2008, Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing, J. Mater. Civ. Eng., 20, 659, 10.1061/(ASCE)0899-1561(2008)20:10(659)

Kok, 2009, The effects of using lime and styrene–butadiene–styrene on moisture sensitivity resistance of hot mix asphalt, Constr. Build. Mater., 23, 1999, 10.1016/j.conbuildmat.2008.08.019

Kringos, 2007

Kringos, 2008, Determination of moisture susceptibility of mastic-stone bond strength and comparison to thermodynamical properties, J. Assoc. Asphalt Paving Technol., 77, 435

Kringos, 2008, Modelling of combined physical–mechanical moisture-induced damage in asphaltic mixes, Part 1: governing processes and formulations, Int. J. Pavement Eng., 9, 115, 10.1080/10298430701792185

Kringos, 2009, Identification of parameters related to moisture conditioning that cause variability in modified lottman test, Transp. Res. Rec. J. Transp. Res. Board, 2127, 1, 10.3141/2127-01

Kutay, 2007, Dynamic effects on moisture transport in asphalt concrete, J. Transp. Eng., 133, 406, 10.1061/(ASCE)0733-947X(2007)133:7(406)

Liddle, 2007

Little, 2003, Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements, 37

Liu, 1996, The kinetics of carbonyl formation in asphalt, AIChE J., 42, 1069, 10.1002/aic.690420417

Lottman, 1978, Laboratory test methods for predicting moisture-induced damage to asphalt concrete, Transp. Res. Rec., 843

Lu, 2008, Inclusion of moisture effect in fatigue test for asphalt pavements

Lu, 2005

Majidzadeh, 1968

Masad, 2006, Characterization of HMA moisture damage using surface energy and fracture properties (with discussion), J. Assoc. Asph. Paving Technol., 75

McCann, 2003, Evaluation of moisture sensitivity and performance of lime in hot-mix asphalt: resilient modulus, tensile strength, and simple shear tests, Transp. Res. Rec. J. Transp. Res. Board, 1832, 9, 10.3141/1832-02

McCann, 2006, Comparison of moisture damage in hot mix asphalt using ultrasonic accelerated moisture conditioning and tensile strength test results

McGennis, 1984

Medeiros, 2012, Evaluation of moisture and low-temperature cracking susceptibility of warm-mixture asphalt, Int. J. Pavement Eng., 13, 395, 10.1080/10298436.2011.582113

Mehrara, 2010, Evaluation of asphalt mixtures' moisture sensitivity by dynamic creep test, J. Mater. Civ. Eng., 23, 212, 10.1061/(ASCE)MT.1943-5533.0000146

Mehrara, 2013, A review of state of the art on stripping phenomenon in asphalt concrete, Constr. Build. Mater., 38, 423, 10.1016/j.conbuildmat.2012.08.033

Merusi, 2010, Moisture susceptibility and stripping resistance of asphalt mixtures modified with different synthetic waxes, Transp. Res. Rec. J. Transp. Res. Board, 2180, 110, 10.3141/2180-13

Mladenovič, 2015, Environmental evaluation of two scenarios for the selection of materials for asphalt wearing courses, J. Clean. Prod., 87, 683, 10.1016/j.jclepro.2014.10.013

Mo, 2010

Modarres, 2014, Coal waste application in recycled asphalt mixtures with bitumen emulsion, J. Clean. Prod., 83, 263, 10.1016/j.jclepro.2014.07.082

Modarres, 2014, Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impacts, J. Clean. Prod., 91, 262, 10.1016/j.jclepro.2014.11.078

Mogawer, 2011, Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures, Transp. Res. Rec. J. Transp. Res. Board, 2209, 52, 10.3141/2209-07

Moghadas Nejad, 2013, Influence of using polymeric aggregate treatment on moisture damage in hot mix asphalt, Constr. Build. Mater., 47, 1523, 10.1016/j.conbuildmat.2013.06.060

Mohammad, 2008, 10.1061/40971(310)127

Mohan, 2010

Moraes, 2011, Measuring the effect of moisture on asphalt-aggregate bond with the bitumen bond strength test, Transp. Res. Rec. J. Transp. Res. Board, 2209, 70, 10.3141/2209-09

Netzel, 2006, Apparent activation energies for molecular motions in solid asphalt, Energy & Fuels, 20, 2181, 10.1021/ef0601768

Nguyen, 1996, Unified model for the degradation of organic coatings on steel in a neutral electrolyte, JCT, J. Coat. Technol., 68, 45

Nguyen, 2003, Relating laboratory and outdoor exposure of coatings: IV. Mode and mechanism for hydrolytic degradation of acrylic-melamine coatings exposed to water vapor in the absence of UV light, J. Coat. Technol., 75, 37, 10.1007/BF02720521

Nguyen, 2005, In situ Spectroscopic study of water at the Asphalt/Siliceous substrate interface and its implication in stripping, J. Adhesi., 81, 1

Oliveira, 2011

Oliveira, 2013, Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures, J. Clean. Prod., 41, 15, 10.1016/j.jclepro.2012.09.047

Pan, 2008, Laboratory investigation of acetate-based deicing/anti-icing agents deteriorating airfield asphalt concrete, Asph. Paving Technology-Proceedings, 77, 773

Petersen, 1982, Chemistry of asphalt-aggregate interaction: relationship with pavement moisture-damage prediction test, Transp. Res. Rec.

Petrie, 2000

Plancher, 1977, Identification of chemical types in asphalts strongly adsorbed at the asphalt-aggregate interface and their relative displacement by water, Proc. Assoc. Asph. Paving Technol., 46, 151

Poulikakos, 2012, A multi-scale fundamental investigation of moisture induced deterioration of porous asphalt concrete, Constr. Build. Mater., 36, 1025, 10.1016/j.conbuildmat.2012.04.071

Poulikakos, 2006

Rice, 1958, Relationship of aggregate characteristics to the effect of water on bituminous paving mixtures, 17

Rodríguez-Alloza, 2015, Hybrid input–output life cycle assessment of warm mix asphalt mixtures, J. Clean. Prod., 90, 171, 10.1016/j.jclepro.2014.11.035

Saarenketo, 2000, Road evaluation with ground penetrating radar, J. Appl. Geophys., 43, 119, 10.1016/S0926-9851(99)00052-X

Salomon, 2002, Ranking asphalt binders by activation energy for flow, J. Appl. Asph. Bind. Technol., 2

Scott, 1978, Adhesion and disbonding mechanisms of asphalt used in highway construction and maintenance, Proc. Assoc. Asph. Paving Technol., 47, 19

Solaimanian, 2003, Test methods to predict moisture sensitivity of hot-mix asphalt pavements

Solaimanian, 2007, Improved conditioning and testing procedures for HMA moisture susceptibility, Transp. Res. Board, 589

Stuart, 1990

Swiss-Standard, 2008

Tarefder, 2012, Laboratory evaluation of moisture damage in asphalt, Can. J. Civ. Eng., 39, 104, 10.1139/l11-114

Tarrer, 1986, Stripping of asphalt Concrete: chemical testing, Report number 2, Project #930-111, Ala. Highw. Res.

Tarrer, 1991

Taylor, 1983, Stripping of asphalt pavements: state of the art (discussion, closure), Transp. Res. Rec., 911

Thelen, 1958, Surface energy and adhesion properties in asphalt-aggregate Systems, Highw. Res. Board Bull., 192, 63

Tunnicliff, 1984

Twagira, 2010, Development of a new moisture conditioning procedure for bitumen stabilized materials, Paving Mater. Pavement Anal., ASCE, 19, 10.1061/41104(377)3

Vasconcelos, 2010

Vasconcelos, 2010, Measurement of water diffusion in asphalt binders using fourier transform infrared-attenuated total reflectance, Transp. Res. Rec. J. Transp. Res. Board, 2179, 29, 10.3141/2179-04

Vuorinen, 2001, A new ultrasonic method for measuring stripping resistance of bitumen on aggregate, Road Mater. Pavement Des., 2, 297, 10.1080/14680629.2001.9689905

Wasiuddin, 2005, Assessment of surface free energy characteristics of performance graded asphalt binders, Adv. Pavement Eng. Am. Soc. Civ. Eng., 1, 10.1061/40776(155)12

Wasiuddin, 2007, Effect of antistrip additives on surface free energy characteristics of asphalt binders for moisture-induced damage potential, ASTM J. Test. Eval., 35, 36

Wasiuddin, 2008, Effect of sasobit and aspha-min on wettability and adhesion between asphalt binders and aggregates, Transp. Res. Rec. J. Transp. Res. Board, 2051, 80, 10.3141/2051-10

Wasiuddin, 2011, Novel moisture-conditioning method for adhesive failure of hot-and warm-mix asphalt binders, Transp. Res. Rec. J. Transp. Res. Board, 2208, 108, 10.3141/2208-14

Western Research Institute, 2002

Xiao, 2010, Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures, J. Mater. Civ. Eng., 22, 1047, 10.1061/(ASCE)MT.1943-5533.0000111

Xiao, 2011, Laboratory evaluation of effects of soaked duration on moisture susceptibility of warm mix asphalt mix

Xiaojun, 2008, Moisture damage of asphalt mixes modified with SEAM Pellets, Transp. Dev. Innov. Best Pract. Am. Soc. Civ. Eng., 492, 10.1061/40961(319)81

Yusoff, 2014, The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures, Constr. Build. Mater., 72, 139, 10.1016/j.conbuildmat.2014.09.014

Zaniewski, 2006, Investigation of moisture sensitivity of hot mix asphalt concrete

Zettlemoyer, 1968, Hydrophobic surfaces, J. Colloid Interface Sci., 28, 343, 10.1016/0021-9797(68)90066-0

Zhou, 2009, Influence of water saturated state on moisture susceptibility of asphalt mixture

Zollinger, 2005