A review on membrane fabrication: Structure, properties and performance relationship
Tóm tắt
Từ khóa
Tài liệu tham khảo
Baker, 2004
Khayet, 2011
Alkhudhiri, 2012, Membrane distillation: a comprehensive review, Desalination, 287, 2, 10.1016/j.desal.2011.08.027
Drioli, 2009
Mulder, 1996
Pinnau, 2000, Formation and modification of polymeric membranes: overview, Membr. Form. Modif., 744, 1, 10.1021/bk-2000-0744.ch001
Liu, 2011, Progress in the production and modification of PVDF membranes, J. Membr. Sci., 375, 1, 10.1016/j.memsci.2011.03.014
Boussu, 2006, Evaluation of self-made nanoporous polyethersulfone membranes, relative to commercial nanofiltration membranes, Desalination, 200, 416, 10.1016/j.desal.2006.03.353
Radovanovic, 1992, Formation of asymmetric polysulfone membranes by immersion precipitation .1. Modeling mass-transport during gelation, J. Membr. Sci., 65, 213, 10.1016/0376-7388(92)87024-R
Loeb, 1963, Sea water demineralization by means of an osmotic membrane, 38, 117
Strathmann, 1975, Formation mechanism of asymmetric membranes, Desalination, 16, 179, 10.1016/S0011-9164(00)82092-5
Smolders, 1992, Microstructures in phase-inversion membranes .1. Formation of macrovoids, J. Membr. Sci., 73, 259, 10.1016/0376-7388(92)80134-6
Ulbricht, 2006, Advanced functional polymer membranes, Polymer, 47, 2217, 10.1016/j.polymer.2006.01.084
Kim, 2002, Formation of integrally skinned asymmetric polyetherimide nanofiltration membranes by phase inversion process, J. Appl. Polym. Sci., 84, 1300, 10.1002/app.10452
Kim, 1996, The kinetic study for asymmetric membrane formation via phase-inversion process, J. Appl. Polym. Sci., 62, 621, 10.1002/(SICI)1097-4628(19961024)62:4<621::AID-APP5>3.0.CO;2-V
Zheng, 2006, The relationship between porosity and kinetics parameter of membrane formation in PSF ultrafiltration membrane, J. Membr. Sci., 286, 7, 10.1016/j.memsci.2006.09.033
Amirilargani, 2010, Effects of coagulation bath temperature and polyvinylpyrrolidone content on flat sheet asymmetric polyethersulfone membranes, Polym. Eng. Sci., 50, 885, 10.1002/pen.21603
Gittens, 1970, The structure of cellulose acetate membranes for reverse osmosis. Part I. Membranes prepared from a dioxan based dope, Desalination, 8, 369, 10.1016/S0011-9164(00)80239-8
Fahey, 1971, Improved cellulose acetate membranes for reverse osmosis, Desalination, 9, 297, 10.1016/0011-9164(71)80001-2
Mehta, 1972, Influence of some processing variables on the properties of cellulose acetate membranes III. Temperature dependence of the desalination performance of membranes plasticized by various plasticizers, Desalination, 10, 369, 10.1016/S0011-9164(00)80006-5
Matsuda, 1978, On the conditions of fabrication of tubular cellulose acetate membranes, Desalination, 27, 41, 10.1016/S0011-9164(00)82211-0
Schwarz, 1987, Annealing effect in porous cellulose acetate membranes, J. Membr. Sci., 34, 283, 10.1016/S0376-7388(00)80040-X
Han, 1991, Characterization of reverse osmosis cellulose acetate membranes by gas adsorption method: effect of casting variables and chlorine damage, J. Membr. Sci., 62, 325, 10.1016/0376-7388(91)80046-9
Mohammadi, 2009, Effect of production conditions on morphology and permeability of asymmetric cellulose acetate membranes, Desalination, 243, 1, 10.1016/j.desal.2008.04.010
Liu, 2011, Characterization of surface modification of polyethersulfone membrane, J. Adhes. Sci. Technol., 25, 193, 10.1163/016942410X503311
More, 2010, Synthesis and characterization of polyamides containing pendant pentadecyl chains, Eur. Polym. J., 46, 557, 10.1016/j.eurpolymj.2009.11.014
Buch, 2008, Preparation, characterization and chlorine stability of aromatic–cycloaliphatic polyamide thin film composite membranes, J. Membr. Sci., 309, 36, 10.1016/j.memsci.2007.10.004
Baker, 2004
Chuang, 2000, The effect of polymeric additives on the structure and permeability of poly(vinyl alcohol) asymmetric membranes, Polymer, 41, 5633, 10.1016/S0032-3861(99)00818-6
Lafreniere, 1987, Effect of polyvinylpyrrolidone additive on the performance of polyethersulfone ultrafiltration membranes, Ind. Eng. Chem. Res., 26, 2385, 10.1021/ie00071a035
Bottino, 1988, High-performance ultrafiltration membranes cast from LiCl doped solutions, Desalination, 68, 167, 10.1016/0011-9164(88)80052-3
Fontananova, 2006, Effect of additives in the casting solution on the formation of PVDF membranes, Desalination, 192, 190, 10.1016/j.desal.2005.09.021
Lee, 2002, Solution properties of poly(amic acid)-NMP containing LiCl and their effects on membrane morphologies, J. Membr. Sci., 196, 267, 10.1016/S0376-7388(01)00610-X
Shi, 2008, Effect of additives on the fabrication of poly (vinylidene fluoride-co-hexafluropropylene) (PVDF-HFP) asymmetric microporous hollow fiber membranes, J. Membr. Sci., 315, 195, 10.1016/j.memsci.2008.02.035
Wang, 2000, Porous PVDF asymmetric hollow fiber membranes prepared with the use of small molecular additives, J. Membr. Sci., 178, 13, 10.1016/S0376-7388(00)00460-9
Saljoughi, 2009, Effect of poly(vinyl pyrrolidone) concentration and coagulation bath temperature on the morphology, permeability, and thermal stability of asymmetric cellulose acetate membranes, J. Appl. Polym. Sci., 111, 2537, 10.1002/app.29354
Wang, 2009, Improvement of hydrophilicity and blood compatibility on polyethersulfone membrane by adding polyvinylpyrrolidone, Fibers Polym., 10, 1, 10.1007/s12221-009-0001-4
Ochoa, 2001, Pore size distributions based on AFM imaging and retention of multidisperse polymer solutes — characterisation of polyethersulfone UF membranes with dopes containing different PVP, J. Membr. Sci., 187, 227, 10.1016/S0376-7388(01)00348-9
Marchese, 2003, Fouling behaviour of polyethersulfone UF membranes made with different PVP, J. Membr. Sci., 211, 1, 10.1016/S0376-7388(02)00260-0
Wang, 1998, Formation mechanism of the macrovoids induced by surfactant additives, J. Membr. Sci., 142, 191, 10.1016/S0376-7388(97)00322-0
McKelvey, 1996, Phase separation, vitrification, and the manifestation of macrovoids in polymeric asymmetric membranes, J. Membr. Sci., 112, 29, 10.1016/0376-7388(95)00197-2
Arthanareeswaran, 2007, Metal ion separation and protein removal from aqueous solutions using modified cellulose acetate membranes: role of polymeric additives, Sep. Purif. Technol., 55, 8, 10.1016/j.seppur.2006.10.014
Saljoughi, 2010, Effect of PEG additive and coagulation bath temperature on the morphology, permeability and thermal/chemical stability of asymmetric CA membranes, Desalination, 262, 72, 10.1016/j.desal.2010.05.046
Susanto, 2009, Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives, J. Membr. Sci., 327, 125, 10.1016/j.memsci.2008.11.025
Rong, 2001, Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites, Polymer, 42, 167, 10.1016/S0032-3861(00)00325-6
Ng, 2013, Polymeric membranes incorporated with metal/metal oxide nanoparticles: a comprehensive review, Desalination, 308, 15, 10.1016/j.desal.2010.11.033
Zodrow, 2009, Polysulfone ultrafiltration membranes impregnated with silver nanoparticles show improved biofouling resistance and virus removal, Water Res., 43, 715, 10.1016/j.watres.2008.11.014
Yan, 2006, Effect of nano-sized Al2O3-particle addition on PVDF ultratiltration membrane performance, J. Membr. Sci., 276, 162, 10.1016/j.memsci.2005.09.044
Yang, 2007, The influence of nano-sized TiO2 fillers on the morphologies and properties of PSFUF membrane, J. Membr. Sci., 288, 231, 10.1016/j.memsci.2006.11.019
Silva, 2004, Solution-cast Nafion® ionomer membranes: preparation and characterization, Electrochim. Acta, 49, 3211, 10.1016/j.electacta.2004.02.035
Nguyen, 2010, Dry-cast process for synthetic microporous membranes: physico-chemical analyses through morphological studies, J. Membr. Sci., 358, 13, 10.1016/j.memsci.2010.04.022
Kim, 2007, Preparation of a unique microporous structure via two step phase separation in the course of drying a ternary polymer solution, Langmuir, 23, 12397, 10.1021/la7013896
Zhao, 2013, Preparation of microporous silicone rubber membrane with tunable pore size via solvent evaporation-induced phase separation, ACS Appl. Mater. Interfaces, 5, 2040, 10.1021/am302929c
Cadotte, 1980, New thin-film composite seawater reverse-osmosis membrane, Desalination, 32, 25, 10.1016/S0011-9164(00)86003-8
Cadotte, 1988, Nanofiltration membranes broaden the use of membrane separation technology, Desalination, 70, 77, 10.1016/0011-9164(88)85045-8
Lau, 2012, A recent progress in thin film composite membrane: a review, Desalination, 287, 190, 10.1016/j.desal.2011.04.004
Petersen, 1993, Composite reverse-osmosis and nanofiltration membranes, J. Membr. Sci., 83, 81, 10.1016/0376-7388(93)80014-O
Rao, 1997, Interfacially synthesized thin film composite RO membranes for seawater desalination, J. Membr. Sci., 124, 263, 10.1016/S0376-7388(96)00252-9
Roh, 2006, Synthesis and characterization of interfacially polymerized polyamide thin films, Desalination, 191, 279, 10.1016/j.desal.2006.03.004
Ghosh, 2008, Impacts of reaction and curing conditions on polyamide composite reverse osmosis membrane properties, J. Membr. Sci., 311, 34, 10.1016/j.memsci.2007.11.038
Abu Tarboush, 2008, Preparation of thin-film-composite polyamide membranes for desalination using novel hydrophilic surface modifying macromolecules, J. Membr. Sci., 325, 166, 10.1016/j.memsci.2008.07.037
Verissimo, 2006, Influence of the diamine structure on the nanofiltration performance, surface morphology and surface charge of the composite polyamide membranes, J. Membr. Sci., 279, 266, 10.1016/j.memsci.2005.12.014
Huang, 2006, Polyamide thin-film composite membranes prepared by interfacial polymerization for pervaporation separation, Desalination, 200, 387, 10.1016/j.desal.2006.03.386
Korikov, 2006, Interfacially polymerized hydrophilic microporous thin film composite membranes on porous polypropylene hollow fibers and flat films, J. Membr. Sci., 279, 588, 10.1016/j.memsci.2005.12.051
Li, 2007, Polyamide thin film composite membranes prepared from 3,4′,5-biphenyl triacyl chloride, 3,3′,5,5′-biphenyl tetraacyl chloride and m-phenylenediamine, J. Membr. Sci., 289, 258, 10.1016/j.memsci.2006.12.007
Liu, 2008, Study on a novel antifouling polyamide-urea reverse osmosis composite membrane (ICIC-MPD) — III. Analysis of membrane electrical properties, J. Membr. Sci., 310, 119, 10.1016/j.memsci.2007.10.041
An, 2011, Influence of polyvinyl alcohol on the surface morphology, separation and anti-fouling performance of the composite polyamide nanofiltration membranes, J. Membr. Sci., 367, 158, 10.1016/j.memsci.2010.10.060
Liu, 2008, Preparation, structure characteristics and separation properties of thin-film composite polyamide-urethane seawater reverse osmosis membrane, J. Membr. Sci., 325, 947, 10.1016/j.memsci.2008.09.033
Duan, 2010, Influence of hexamethyl phosphoramide on polyamide composite reverse osmosis membrane performance, Sep. Purif. Technol., 75, 145, 10.1016/j.seppur.2010.08.004
Kawaguchi, 1984, Chlorine-resistant membrane for reverse-osmosis .1. Correlation between chemical structures and chlorine resistance of polyamides, J. Appl. Polym. Sci., 29, 3359, 10.1002/app.1984.070291113
Misdan, 2012, Seawater Reverse Osmosis (SWRO) desalination by thin-film composite membrane—current development, challenges and future prospects, Desalination, 287, 228, 10.1016/j.desal.2011.11.001
Tang, 2008, Study on a novel polyester composite nanofiltration membrane by interfacial polymerization of triethanolamine (TEOA) and trimesoyl chloride (TMC) I. Preparation, characterization and nanofiltration properties test of membrane, J. Membr. Sci., 320, 198, 10.1016/j.memsci.2008.04.002
Razdan, 2004, Nanofiltration thin-film-composite polyesteramide membranes based on bulky diols, Desalination, 161, 25, 10.1016/S0011-9164(04)90037-9
Sarada, 1983, Three dimensional structure of celgard® microporous membranes, J. Membr. Sci., 15, 97, 10.1016/S0376-7388(00)81364-2
Sadeghi, 2007
Zhu, 1996, A novel polypropylene microporous film, Polym. Adv. Technol., 7, 743, 10.1002/(SICI)1099-1581(199609)7:9<743::AID-PAT548>3.0.CO;2-W
Trommer, 2010, Nonrigid microporous PVC sheets: preparation and properties, J. Appl. Polym. Sci., 115, 2119, 10.1002/app.31305
Sadeghi, 2007, Analysis of microporous membranes obtained from polypropylene films by stretching, J. Membr. Sci., 292, 62, 10.1016/j.memsci.2007.01.023
Sadeghi, 2008, Microporous membranes obtained from polypropylene blends with superior permeability properties, J. Polymer Sci., Part B: Polymer Phys., 46, 148, 10.1002/polb.21350
Sadeghi, 2009, Effect of PVDF characteristics on extruded film morphology and porous membranes feasibility by stretching, J. Polymer Sci., Part B: Polymer Phys., 47, 1219, 10.1002/polb.21725
Kurumada, 1998, Structure generation in PTFE porous membranes induced by the uniaxial and biaxial stretching operations, J. Membr. Sci., 149, 51, 10.1016/S0376-7388(98)00179-3
Tabatabaei, 2008, Microporous membranes obtained from polypropylene blend films by stretching, J. Membr. Sci., 325, 772, 10.1016/j.memsci.2008.09.001
Kim, 2008, Effects of precursor properties on the preparation of polyethylene hollow fiber membranes by stretching, J. Membr. Sci., 318, 201, 10.1016/j.memsci.2008.02.050
Fleischer, 1975, Nuclear tracks in solids
Robert, 1975
Apel, 2001, Track etching technique in membrane technology, Radiat. Meas., 34, 559, 10.1016/S1350-4487(01)00228-1
Martin, 2001, Investigations of the transport properties of gold nanotubule membranes, J. Phys. Chem. B, 105, 1925, 10.1021/jp003486e
Toimil-Molares, 2012, Characterization and properties of micro- and nanowires of controlled size, composition, and geometry fabricated by electrodeposition and ion-track technology, Beilstein J. Nanotechnol., 3, 860, 10.3762/bjnano.3.97
Komaki, 1976, Growth of fine holes in polyethylenenaphthalate film irradiated by fission fragments, J. Appl. Phys., 47, 1355, 10.1063/1.322840
Komaki, 1995, Effects of gamma rays on etching of heavy ion tracks in polyimide, Radiat. Meas., 24, 193, 10.1016/1350-4487(94)00089-J
Starosta, 1999, Investigations of heavy ion tracks in polyethylene naphthalate films, Radiat. Meas., 31, 149, 10.1016/S1350-4487(99)00184-5
Shirkova, 1997, Physical and chemical basis for the manufacturing of fluoropolymer track membranes, Radiat. Meas., 28, 791, 10.1016/S1350-4487(97)00186-8
Prince, 2012, Preparation and characterization of highly hydrophobic poly(vinylidene fluoride) — clay nanocomposite nanofiber membranes (PVDF–clay NNMs) for desalination using direct contact membrane distillation, J. Membr. Sci., 397–398, 80, 10.1016/j.memsci.2012.01.012
Lalia, 2013, Fabrication and characterization of polyvinylidenefluoride-co-hexafluoropropylene (PVDF-HFP) electrospun membranes for direct contact membrane distillation, J. Membr. Sci., 428, 104, 10.1016/j.memsci.2012.10.061
Gopal, 2006, Electrospun nanofibrous filtration membrane, J. Membr. Sci., 281, 581, 10.1016/j.memsci.2006.04.026
Bhardwaj, 2010, Electrospinning: a fascinating fiber fabrication technique, Biotechnol. Adv., 28, 325, 10.1016/j.biotechadv.2010.01.004
Feng, 2008, Production of drinking water from saline water by air-gap membrane distillation using polyvinylidene fluoride nanofiber membrane, J. Membr. Sci., 311, 1, 10.1016/j.memsci.2007.12.026
Khayet, 2011, Chapter 7 — Formation of Nano-fibre MD Membranes, 163
Kaur, 2012, Preparation and characterization of surface modified electrospun membranes for higher filtration flux, J. Membr. Sci., 390–391, 235, 10.1016/j.memsci.2011.11.045
Maab, 2012, Synthesis and fabrication of nanostructured hydrophobic polyazole membranes for low-energy water recovery, J. Membr. Sci., 423–424, 11, 10.1016/j.memsci.2012.07.009
Wang, 2012, Electrospun nanofibrous membranes for high flux microfiltration, J. Membr. Sci., 392–393, 167, 10.1016/j.memsci.2011.12.019
Zhao, 2012, High performance ultrafiltration membrane based on modified chitosan coating and electrospun nanofibrous PVDF scaffolds, J. Membr. Sci., 394–395, 209, 10.1016/j.memsci.2011.12.043
Zong, 2002, Structure and process relationship of electrospun bioabsorbable nanofiber membranes, Polymer, 43, 4403, 10.1016/S0032-3861(02)00275-6
Liu, 2005, Microscopic polymer cups by electrospinning, Polymer, 46, 3211, 10.1016/j.polymer.2004.11.116
Pai, 2009, Morphology of porous and wrinkled fibers of polystyrene electrospun from dimethylformamide, Macromolecules, 42, 2102, 10.1021/ma802529h
Lin, 2010, Direct fabrication of highly nanoporous polystyrene fibers via electrospinning, ACS Appl. Mater. Interfaces, 2, 521, 10.1021/am900736h
Kaur, 2012, Influence of electrospun fiber size on the separation efficiency of thin film nanofiltration composite membrane, J. Membr. Sci., 392–393, 101, 10.1016/j.memsci.2011.12.005
Kaur, 2011, Hot pressing of electrospun membrane composite and its influence on separation performance on thin film composite nanofiltration membrane, Desalination, 279, 201, 10.1016/j.desal.2011.06.009
Kim, 2010, Effect of thermal treatment on the characteristics of electrospun PVDF–silica composite nanofibrous membrane, Eur. Polym. J., 46, 1957, 10.1016/j.eurpolymj.2010.08.009
Bellona, 2004, Factors affecting the rejection of organic solutes during NF/RO treatment — a literature review, Water Res., 38, 2795, 10.1016/j.watres.2004.03.034
Hirose, 1996, Effect of skin layer surface structures on the flux behaviour of RO membranes, J. Membr. Sci., 121, 209, 10.1016/S0376-7388(96)00181-0
Vrijenhoek, 2001, Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and nanofiltration membranes, J. Membr. Sci., 188, 115, 10.1016/S0376-7388(01)00376-3
Mulder, 1997
Peterlin, 1975, Dependence of diffusive transport on morphology of crystalline polymers, J. Macromol. Sci. Part B, 11, 57, 10.1080/00222347508217855
Bitter, 1984, Effect of crystallinity and swelling on the permeability and selectivity of polymer membranes, Desalination, 51, 19, 10.1016/0011-9164(84)85049-3
Gliozzi, 1978, The role of swelling, amorphous vs. crystalline content, charge density, and applied stress on the transport properties of polymeric films, J. Membr. Sci., 3, 131, 10.1016/S0376-7388(00)83018-5
Gholap, 2004, Synthesis and characterization of hydrophobically modified poly(vinyl alcohol) hydrogel membrane, Polymer, 45, 5863, 10.1016/j.polymer.2004.06.032
Lue, 2008, Diffusivity enhancement of water vapor in poly(vinyl alcohol)-fumed silica nano-composite membranes: correlation with polymer crystallinity and free-volume properties, J. Membr. Sci., 325, 831, 10.1016/j.memsci.2008.09.015
Yu, 2009, Preparation and characterization of PVDF–SiO2 composite hollow fiber UF membrane by sol–gel method, J. Membr. Sci., 337, 257, 10.1016/j.memsci.2009.03.054
Peng, 2011, Tuning the molecular structure, separation performance and interfacial properties of poly(vinyl alcohol)–polysulfone interfacial composite membranes, J. Membr. Sci., 368, 26, 10.1016/j.memsci.2010.10.056
Peng, 2010, Transport, structural, and interfacial properties of poly(vinyl alcohol)–polysulfone composite nanofiltration membranes, J. Membr. Sci., 353, 169, 10.1016/j.memsci.2010.02.044
Minelli, 2010, Investigation of mass transport properties of microfibrillated cellulose (MFC) films, J. Membr. Sci., 358, 67, 10.1016/j.memsci.2010.04.030
Tseng, 2012, The effect of blending ratio on the compatibility, morphology, thermal behavior and pure water permeation of asymmetric CAP/PVDF membranes, Desalination, 284, 269, 10.1016/j.desal.2011.09.011
Tabatabaei, 2009, Microporous membranes obtained from PP/HDPE multilayer films by stretching, J. Membr. Sci., 345, 148, 10.1016/j.memsci.2009.08.038
Suk, 2010, Development of novel surface modified phase inversion membranes having hydrophobic surface-modifying macromolecule (nSMM) for vacuum membrane distillation, Desalination, 261, 300, 10.1016/j.desal.2010.06.058
Apel, 2006, Structure of polycarbonate track-etch membranes: origin of the “paradoxical” pore shape, J. Membr. Sci., 282, 393, 10.1016/j.memsci.2006.05.045
Nguyen, 1984, Effect of shrinkage on pore size and pore size distribution of different cellulosic reverse osmosis membranes, Ind. Eng. Chem. Prod. Res. Dev., 23, 501, 10.1021/i300015a035
Mok, 1995, Study on the effect of spinning conditions and surface treatment on the geometry and performance of polymeric hollow-fibre membranes, J. Membr. Sci., 100, 183, 10.1016/0376-7388(94)00134-K
Khulbe, 2004, Structural and performance study of micro porous polyetherimide hollow fiber membranes prepared at different air-gap, J. Membr. Sci., 245, 191, 10.1016/j.memsci.2004.06.061
Bakeri, 2010, Effect of polymer concentration on the structure and performance of polyetherimide hollow fiber membranes, J. Membr. Sci., 363, 103, 10.1016/j.memsci.2010.07.018
Bakeri, 2012, Investigation on the effects of fabrication parameters on the structure and properties of surface-modified membranes using response surface methodology, J. Appl. Polym. Sci., 123, 2812, 10.1002/app.34802
Tiraferri, 2011, Relating performance of thin-film composite forward osmosis membranes to support layer formation and structure, J. Membr. Sci., 367, 340, 10.1016/j.memsci.2010.11.014
Pekny, 2003, Flow-visualization during macrovoid pore formation in dry-cast cellulose acetate membranes, J. Membr. Sci., 211, 71, 10.1016/S0376-7388(02)00381-2
Hernández, 1998, Pore size distributions of track-etched membranes; comparison of surface and bulk porosities, Colloids Surf., A Physicochem. Eng. Asp., 138, 391, 10.1016/S0927-7757(96)03974-X
Wu, 2012, Structure and performance of polyacrylonitrile membranes prepared via thermally induced phase separation, J. Membr. Sci., 409–410, 355, 10.1016/j.memsci.2012.04.006
Zhao, 2013, A novel composite microfiltration membrane: structure and performance, J. Membr. Sci., 439, 12, 10.1016/j.memsci.2013.03.036
Razmjou, 2012, The effect of modified TiO2 nanoparticles on the polyethersulfone ultrafiltration hollow fiber membranes, Desalination, 287, 271, 10.1016/j.desal.2011.11.025
Zou, 2011, Surface hydrophilic modification of RO membranes by plasma polymerization for low organic fouling, J. Membr. Sci., 369, 420, 10.1016/j.memsci.2010.12.023
Kimura, 2003, Adsorption of hydrophobic compounds onto NF/RO membranes: an artifact leading to overestimation of rejection, J. Membr. Sci., 221, 89, 10.1016/S0376-7388(03)00248-5
Wintgens, 2003, Occurrence and removal of endocrine disrupters in landfill leachate treatment plants, Water Sci. Technol., 48, 127, 10.2166/wst.2003.0180
Chang, 2002, Adsorption of trace steroid estrogens to hydrophobic hollow fibre membranes, Desalination, 146, 381, 10.1016/S0011-9164(02)00517-9
Taniguchi, 2003, Modes of natural organic matter fouling during ultrafiltration, Environ. Sci. Technol., 37, 1676, 10.1021/es020555p
Kuhnl, 2010, Impact of colloidal interactions on the flux in cross-flow microfiltration of milk at different pH values: a surface energy approach, J. Membr. Sci., 352, 107, 10.1016/j.memsci.2010.02.006
Chong, 2009, Implications of critical flux and cake enhanced osmotic pressure (CEOP) on colloidal fouling in reverse osmosis: modeling approach, Desalin. Water Treat., 8, 68, 10.5004/dwt.2009.792
Song, 1998, Flux decline in crossflow microfiltration and ultrafiltration: mechanisms and modeling of membrane fouling, J. Membr. Sci., 139, 183, 10.1016/S0376-7388(97)00263-9
Kiso, 2001, Rejection properties of alkyl phthalates with nanofiltration membranes, J. Membr. Sci., 182, 205, 10.1016/S0376-7388(00)00567-6
Van der Bruggen, 2002, Evaluation of parameters describing flux decline in nanofiltration of aqueous solutions containing organic compounds, Desalination, 147, 281, 10.1016/S0011-9164(02)00553-2
Matsuura, 1971, Physicochemical criteria for reverse osmosis separation of alcohols, phenols, and monocarboxylic acids in aqueous solutions using porous cellulose acetate membranes, J. Appl. Polym. Sci., 15, 2905, 10.1002/app.1971.070151202
Van der Bruggen, 2001, Flux decline during nanofiltration of organic components in aqueous solution, Environ. Sci. Technol., 35, 3535, 10.1021/es0100064
Li, 2012, Exploring the dependence of bulk properties on surface chemistries and microstructures of commercially composite RO membranes by novel characterization approaches, Desalination, 292, 9, 10.1016/j.desal.2012.02.005
Tang, 2009, Effect of membrane chemistry and coating layer on physiochemical properties of thin film composite polyamide RO and NF membranes I. FTIR and XPS characterization of polyamide and coating layer chemistry, Desalination, 242, 149, 10.1016/j.desal.2008.04.003
Liu, 2006, Study on a novel polyamide-urea reverse osmosis composite membrane (ICIC-MPD) II. Analysis of membrane antifouling performance, J. Membr. Sci., 283, 133, 10.1016/j.memsci.2006.06.033
Hilal, 2005, Methods employed for control of fouling in MF and UF membranes: a comprehensive review, Sep. Sci. Technol., 40, 1957, 10.1081/SS-200068409
Nabe, 1997, Surface modification of polysulfone ultrafiltration membranes and fouling by BSA solutions, J. Membr. Sci., 133, 57, 10.1016/S0376-7388(97)00073-2
Du, 2009, Modification of poly(vinylidene fluoride) ultrafiltration membranes with poly(vinyl alcohol) for fouling control in drinking water treatment, Water Res., 43, 4559, 10.1016/j.watres.2009.08.008
Yu, 2011, Surface modification of thin-film composite polyamide reverse osmosis membranes with thermo-responsive polymer (TRP) for improved fouling resistance and cleaning efficiency, Sep. Purif. Technol., 76, 283, 10.1016/j.seppur.2010.10.017
Humplik, 2011, Nanostructured materials for water desalination, Nanotechnology, 22, 10.1088/0957-4484/22/29/292001
Gilron, 2001, Effects of surface modification on antifouling and performance properties of reverse osmosis membranes, Desalination, 140, 167, 10.1016/S0011-9164(01)00366-6
Zou, 2010, Synthesis and characterization of thin film composite reverse osmosis membranes via novel interfacial polymerization approach, Sep. Purif. Technol., 72, 256, 10.1016/j.seppur.2010.01.019
Freger, 2002, TFC polyamide membranes modified by grafting of hydrophilic polymers: an FT-IR/AFM/TEM study, J. Membr. Sci., 209, 283, 10.1016/S0376-7388(02)00356-3
Tang, 2009, Effect of membrane chemistry and coating layer on physiochemical properties of thin film composite polyamide RO and NF membranes II. Membrane physiochemical properties and their dependence on polyamide and coating layers, Desalination, 242, 168, 10.1016/j.desal.2008.04.004
Lind, 2010, Tailoring the structure of thin film nanocomposite membranes to achieve seawater RD membrane performance, Environ. Sci. Technol., 44, 8230, 10.1021/es101569p
Li, 2013, Understanding the dependence of contact angles of commercially RO membranes on external conditions and surface features, Desalination, 309, 38, 10.1016/j.desal.2012.09.007
Du, 1994, Vibrational-spectra of water-molecules at quartz water interfaces, Phys. Rev. Lett., 72, 238, 10.1103/PhysRevLett.72.238
Wang, 1997, The electrostatic and steric-hindrance model for the transport of charged solutes through nanofiltration membranes, J. Membr. Sci., 135, 19, 10.1016/S0376-7388(97)00125-7
Wang, 2002, Experimental investigation on separation performance of nanofiltration membranes for inorganic electrolyte solutions, Desalination, 145, 115, 10.1016/S0011-9164(02)00395-8
Bowen, 2002, Linearized transport model for nanofiltration: development and assessment, AICHE J., 48, 760, 10.1002/aic.690480411
Childress, 2000, Relating nanofiltration membrane performance to membrane charge (electrokinetic) characteristics, Environ. Sci. Technol., 34, 3710, 10.1021/es0008620
Deshmukh, 2001, Zeta potential of commercial RO membranes: influence of source water type and chemistry, Desalination, 140, 87, 10.1016/S0011-9164(01)00357-5
Shim, 2002, Effects of natural organic matter and ionic species on membrane surface charge, Environ. Sci. Technol., 36, 3864, 10.1021/es015880b
Yoon, 2002, Transport of perchlorate (ClO4-) through NF and UF membranes, Desalination, 147, 11, 10.1016/S0011-9164(02)00564-7
Braghetta, 1997, Nanofiltration of natural organic matter: pH and ionic strength effects, J. Environ. Eng. ASCE, 123, 628, 10.1061/(ASCE)0733-9372(1997)123:7(628)
Lee, 2002, Determination of membrane pore size distribution using the fractional rejection of nonionic and charged macromolecules, J. Membr. Sci., 201, 191, 10.1016/S0376-7388(01)00729-3
Hu, 2003, Treatability of organic fractions derived from secondary effluent by reverse osmosis membrane, Water Res., 37, 4801, 10.1016/j.watres.2003.08.002
Schafer, 2002, Charge effects in the fractionation of natural organics using ultrafiltration, Environ. Sci. Technol., 36, 2572, 10.1021/es0016708
Ozaki, 2002, Rejection of organic compounds by ultra-low pressure reverse osmosis membrane, Water Res., 36, 123, 10.1016/S0043-1354(01)00197-X
Berg, 1997, Removal of pesticides and other micropollutants by nanofiltration, Desalination, 113, 205, 10.1016/S0011-9164(97)00130-6
Yoon, 1998, Effect of calcium ion on the fouling of nanofilter by humic acid in drinking water production, Water Res., 32, 2180, 10.1016/S0043-1354(97)00416-8
Freger, 2000, Separation of concentrated organic/inorganic salt mixtures by nanofiltration, J. Membr. Sci., 178, 185, 10.1016/S0376-7388(00)00516-0
Boussahel, 2002, Effects of organic and inorganic matter on pesticide rejection by nanofiltration, Desalination, 145, 109, 10.1016/S0011-9164(02)00394-6
Van der Bruggen, 2008, Drawbacks of applying nanofiltration and how to avoid them: a review, Sep. Purif. Technol., 63, 251, 10.1016/j.seppur.2008.05.010
Al-Amoudi, 2007, Fouling strategies and the cleaning system of NF membranes and factors affecting cleaning efficiency, J. Membr. Sci., 303, 6, 10.1016/j.memsci.2007.06.002
Hong, 1997, Chemical and physical aspects of natural organic matter (NOM) fouling of nanofiltration membranes, J. Membr. Sci., 132, 159, 10.1016/S0376-7388(97)00060-4
Cheng, 2011, Positively charged nanofiltration membranes: review of current fabrication methods and introduction of a novel approach, Adv. Colloid Interface Sci., 164, 12, 10.1016/j.cis.2010.12.010
Kato, 2003, Polymer surface with graft chains, Prog. Polym. Sci., 28, 209, 10.1016/S0079-6700(02)00032-1
Du, 2004, Properties of poly (N, N-dimethylaminoethyl methacrylate)/polysulfone positively charged composite nanofiltration membrane, J. Membr. Sci., 239, 183, 10.1016/j.memsci.2004.03.029
Huang, 2006, Studies on nanofiltration membrane formed by diisocyanate cross-linking of quaternized chitosan on poly (acrylonitrile) (PAN) support, J. Membr. Sci., 286, 237, 10.1016/j.memsci.2006.09.045
Elimelech, 1997, Role of membrane surface morphology in colloidal fouling of cellulose acetate and composite aromatic polyamide reverse osmosis membranes, J. Membr. Sci., 127, 101, 10.1016/S0376-7388(96)00351-1
Abu Seman, 2011, Development of antifouling properties and performance of nanofiltration membranes modified by interfacial polymerisation, Desalination, 273, 36, 10.1016/j.desal.2010.09.038
Bowen, 2000, Atomic force microscopy studies of membranes: effect of surface roughness on double-layer interactions and particle adhesion, J. Colloid Interface Sci., 229, 544, 10.1006/jcis.2000.6997
Boussu, 2007, Influence of membrane and colloid characteristics on fouling of nanofiltration membranes, J. Membr. Sci., 289, 220, 10.1016/j.memsci.2006.12.001
Park, 2005, Biofouling potential of various NF membranes with respect to bacteria and their soluble microbial products (SMP): characterizations, flux decline, and transport parameters, J. Membr. Sci., 258, 43, 10.1016/j.memsci.2005.02.025
Kwak, 1999, Use of atomic force microscopy and solid-state NMR spectroscopy to characterize structure–property–performance correlation in high-flux reverse osmosis (RO) membranes, J. Membr. Sci., 158, 143, 10.1016/S0376-7388(99)00039-3
Stamatialis, 1999, Atomic force microscopy of dense and asymmetric cellulose-based membranes, J. Membr. Sci., 160, 235, 10.1016/S0376-7388(99)00089-7
Madaeni, 2001, The effect of surface characteristics on RO membrane performance, Desalination, 139, 371, 10.1016/S0011-9164(01)00334-4
Al-Jeshi, 2006, An investigation into the relationship between flux and roughness on RO membranes using scanning probe microscopy, Desalination, 189, 221, 10.1016/j.desal.2005.08.001
Ramon, 2013, Transport through composite membranes, part 2: impacts of roughness on permeability and fouling, J. Membr. Sci., 425, 141, 10.1016/j.memsci.2012.08.004
Jin, 2009, Role of specific ion interactions in seawater RO membrane fouling by alginic acid, Environ. Sci. Technol., 43, 3580, 10.1021/es8036498
Tang, 2007, Effect of flux (transmembrane pressure) and membrane properties on fouling and rejection of reverse osmosis and nanofiltration membranes treating perfluorooctane sulfonate containing wastewater, Environ. Sci. Technol., 41, 2008, 10.1021/es062052f