A review on laser cladding of high-entropy alloys, their recent trends and potential applications

Albedwawi, 2021, High entropy oxides-exploring a paradigm of promising catalysts: a review, Mater Des, 109534 He, 2017, Design of high-entropy alloy: a perspective from nonideal mixing, JOM, 69, 2092, 10.1007/s11837-017-2452-1 Zhang, 2019, History of high-entropy materials, 1 Zhang, 2014, Microstructures and properties of high-entropy alloys, Prog Mater Sci, 61, 1, 10.1016/j.pmatsci.2013.10.001 Thurston, 2017, Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi, Intermetallics, 88, 65, 10.1016/j.intermet.2017.05.009 Senkov, 2011, Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy, J Alloys Compd, 509, 6043, 10.1016/j.jallcom.2011.02.171 Lilensten, 2014, New structure in refractory high-entropy alloys, Mater Lett, 132, 123, 10.1016/j.matlet.2014.06.064 Shiratori, 2016, Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting, Mater Sci Eng A, 656, 39, 10.1016/j.msea.2016.01.019 Yeh, 2004, Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes, Adv Eng Mater, 6, 299, 10.1002/adem.200300567 Cantor, 2004, Microstructural development in equiatomic multicomponent alloys, Mater Sci Eng A, 375, 213, 10.1016/j.msea.2003.10.257 Tsai, 2014, High-entropy alloys: a critical review, Mater Res Lett, 2, 107, 10.1080/21663831.2014.912690 Zhang, 2018, Science and technology in high-entropy alloys, Sci China Mater, 61, 2, 10.1007/s40843-017-9195-8 Huang, 2015, A study of lattice elasticity from low entropy metals to medium and high entropy alloys, Scr Mater, 101, 32, 10.1016/j.scriptamat.2015.01.011 Gorsse, 2018, From high-entropy alloys to complex concentrated alloys, Comptes Rendus Physique, 19, 721, 10.1016/j.crhy.2018.09.004 Yeh, 2013, Alloy design strategies and future trends in high-entropy alloys, Jom, 65, 1759, 10.1007/s11837-013-0761-6 Cantor, 2014, Multicomponent and high entropy alloys, Entropy, 16, 4749, 10.3390/e16094749 Miracle, 2019, High entropy alloys as a bold step forward in alloy development, Nat Commun, 10, 1, 10.1038/s41467-019-09700-1 Maulik, 2018, Structure and properties of lightweight high entropy alloys: a brief review, Mater Res Express, 5, 10.1088/2053-1591/aabbca Savan, 2020, Structure zone investigation of multiple principle element alloy thin films as optimization for nanoindentation measurements, Materials, 13, 2113, 10.3390/ma13092113 Wang, 2017, Thermodynamics of vacancies and clusters in high-entropy alloys, Phys Rev Mater, 1 Gwalani, 2018, Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing, Acta Mater, 153, 169, 10.1016/j.actamat.2018.05.009 Miracle, 2015, Critical assessment 14: high entropy alloys and their development as structural materials, Mater Sci Technol, 31, 1142, 10.1179/1743284714Y.0000000749 Manzoni, 2019, New multiphase compositionally complex alloys driven by the high entropy alloy approach, Mater Charact, 147, 512, 10.1016/j.matchar.2018.06.036 Murty, 2019 Wu, 2014, Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures, Acta Mater, 81, 428, 10.1016/j.actamat.2014.08.026 Cantor, 2020, Multicomponent high-entropy cantor alloys, Prog Mater Sci, 100754 Basu, 2018, Size effects on plasticity in high-entropy alloys, J Mater Res, 33, 3055, 10.1557/jmr.2018.282 Mehta, 2021, Investigation of sluggish diffusion in FCC Al0. 25CoCrFeNi high-entropy alloy, Mater Res Lett, 9, 239, 10.1080/21663831.2021.1878475 Soto, 2020, Thermodynamic analysis of high entropy alloys and their mechanical behavior in high and low-temperature conditions with a microstructural approach-a review, Intermetallics, 124, 106850, 10.1016/j.intermet.2020.106850 Wang, 2020, Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi) 100-xMox high-entropy alloys, J Alloys Compd, 812, 152139, 10.1016/j.jallcom.2019.152139 Liu, 2019, Fatigue behavior of ultrafine grained triplex Al0. 3CoCrFeNi high entropy alloy, Scr Mater, 158, 116, 10.1016/j.scriptamat.2018.08.048 Chen, 2019, Microstructure stability and oxidation behaviour of (FeCoNiMo) 90 (Al/Cr) 10 high-entropy alloys, Mater Sci Technol, 35, 1883, 10.1080/02670836.2019.1652785 Fang, 2020, High-temperature oxidation resistance, mechanical and wear resistance properties of Ti (C, N)-based cermets with Al0. 3CoCrFeNi high-entropy alloy as a metal binder, J Alloys Compd, 815, 152486, 10.1016/j.jallcom.2019.152486 Li, 2021, Microhardness, wear resistance, and corrosion resistance of AlxCrFeCoNiCu high-entropy alloy coatings on aluminum by laser cladding, Opt Laser Technol, 134, 106632, 10.1016/j.optlastec.2020.106632 Sahlberg, 2016, Superior hydrogen storage in high entropy alloys, Sci Rep, 6, 1, 10.1038/srep36770 Lu, 2019, A promising new class of irradiation tolerant materials: Ti2ZrHfV0. 5Mo0. 2 high-entropy alloy, J Mater Sci Technol, 35, 369, 10.1016/j.jmst.2018.09.034 Li, 2017, A ductile high entropy alloy with attractive magnetic properties, J Alloys Compd, 694, 55, 10.1016/j.jallcom.2016.09.186 Xiong, 2020, Effects of nitrogen alloying and friction stir processing on the microstructures and mechanical properties of CoCrFeMnNi high-entropy alloys, J Alloys Compd, 822, 153512, 10.1016/j.jallcom.2019.153512 Liu, 2020, Superconductivity in hexagonal Nb-Mo-Ru-Rh-Pd high-entropy alloys, Scr Mater, 182, 109, 10.1016/j.scriptamat.2020.03.004 Xin, 2020, Bulk nanocrystalline boron-doped VNbMoTaW high entropy alloys with ultrahigh strength, hardness, and resistivity, J Alloys Compd, 155995 Choudhuri, 2019, Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds, Acta Mater, 165, 420, 10.1016/j.actamat.2018.12.010 Zhang, 2013, Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0. 5 high-entropy alloy by martensite strengthening, Scr Mater, 69, 342, 10.1016/j.scriptamat.2013.05.020 Yang, 2020, Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy, Intermetallics, 124, 106845, 10.1016/j.intermet.2020.106845 Cheng, 2020, Tribological properties of nano/ultrafine-grained FeCoCrNiMnAlx high-entropy alloys over a wide range of temperatures, J Alloys Compd, 817, 153305, 10.1016/j.jallcom.2019.153305 Chen, 2019, The tribological properties of Al0. 6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature, J Alloys Compd, 777, 180, 10.1016/j.jallcom.2018.10.393 Wang, 2020, Microstructures and wear resistance of FeCoCrNi-Mo high entropy alloy/diamond composite coatings by high speed laser cladding, Coatings, 10, 300, 10.3390/coatings10030300 Malatji, 2021, Microstructural, mechanical and electrochemical properties of AlCrFeCuNiWx high entropy alloys, J Mater Res Technol, 11, 1594, 10.1016/j.jmrt.2021.01.103 Wen, 2021, In-situ synthesis of nano-lamellar Ni1.5CrCoFe0.5Mo0.1Nbx eutectic high-entropy alloy coatings by laser cladding: alloy design and microstructure evolution, Surf Coat Technol, 405, 126728, 10.1016/j.surfcoat.2020.126728 George, 2019, High-entropy alloys, Nat Rev Mater, 4, 515, 10.1038/s41578-019-0121-4 Song, 2019, Excellent combination of cryogenic-temperature strength and ductility of high-entropy-alloy-cored multi-layered sheet, J Alloys Compd, 797, 465, 10.1016/j.jallcom.2019.05.088 Wang, 2021, High-entropy alloys: emerging materials for advanced functional applications, J Mater Chem A, 9, 663, 10.1039/D0TA09601F Lyu, 2018, Fundamental understanding of mechanical behavior of high-entropy alloys at low temperatures: a review, J Mater Res, 33, 2998, 10.1557/jmr.2018.273 Sharma, 2018, High-entropy alloys and metallic nanocomposites: processing challenges, microstructure development and property enhancement, Mater Sci Eng R Rep, 131, 1, 10.1016/j.mser.2018.04.003 Kim, 2019, Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering, J Alloys Compd, 797, 834, 10.1016/j.jallcom.2019.05.043 Ren, 2013, Structure and mechanical properties of multi-element (AlCrMnMoNiZr) Nx coatings by reactive magnetron sputtering, J Alloys Compd, 560, 171, 10.1016/j.jallcom.2013.01.148 Khan, 2021, Nanostructured AlCoCrCu0. 5FeNi high entropy oxide (HEO) thin films fabricated using reactive magnetron sputtering, Appl Surf Sci, 553, 149491, 10.1016/j.apsusc.2021.149491 Lehtonen, 2020, Cold gas spraying of a high-entropy CrFeNiMn equiatomic alloy, Coatings, 10, 53, 10.3390/coatings10010053 Hushchyk, 2020, Nanostructured AlNiCoFeCrTi high-entropy coating performed by cold spray, Appl Nanosci, 1 Yin, 2019, Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying, J Mater Sci Technol, 35, 1003, 10.1016/j.jmst.2018.12.015 Zhu, 2021, Microstructure and properties of Al 2 O 3-13wt.% TiO 2-reinforced CoCrFeMnNi high-entropy alloy composite coatings prepared by plasma spraying, J Therm Spray Technol, 1 Xiao, 2020, Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying, Surf Coat Technol, 385, 125430, 10.1016/j.surfcoat.2020.125430 Wang, 2019, Phase evolution and solidification cracking sensibility in laser remelting treatment of the plasma-sprayed CrMnFeCoNi high entropy alloy coating, Mater Des, 182, 108040, 10.1016/j.matdes.2019.108040 Arif, 2020, Effect of spraying parameters on surface roughness, deposition efficiency, and microstructure of electric arc sprayed brass coating, Int J Adv Appl Sci, 7, 25, 10.21833/ijaas.2020.07.004 Wei, 2021, Ultrasonic cavitation erosion behaviors of high-velocity oxygen-fuel (HVOF) sprayed AlCoCrFeNi high-entropy alloy coating in different solutions, Surf Coat Technol, 409, 126899, 10.1016/j.surfcoat.2021.126899 Wang, 2021, A novel high-entropy alloy composite coating with core-shell structures prepared by plasma cladding, Vacuum, 184, 109905, 10.1016/j.vacuum.2020.109905 Kemény, 2021, Examination of microstructure and corrosion properties of novel AlCoCrFeNi multicomponent alloy, Mater Today Proc, 45, 4250, 10.1016/j.matpr.2020.12.285 Song, 2019, Effects of NiP coating on mechanical properties of Al0.3CoCrFeNi high-entropy alloys, Mater Sci Eng A, 752, 152, 10.1016/j.msea.2019.03.010 Böőr, 2020, Chemical vapor deposition of TiN on a CoCrFeNi multi-principal element alloy substrate, Surf Coat Technol, 393, 125778, 10.1016/j.surfcoat.2020.125778 Ustinov, 2020, Formation of thin foils of high-entropy CrFeCoNiCu alloys by EB-PVD process, Surf Coat Technol, 403, 126440, 10.1016/j.surfcoat.2020.126440 Xia, 2020, Angular-dependent deposition of MoNbTaVW HEA thin films by three different physical vapor deposition methods, Surf Coat Technol, 385, 125356, 10.1016/j.surfcoat.2020.125356 Nadutov, 2016, Creation and Mössbauer studies of high-entropy physical vapor deposition by cathode arc evaporation (PVD CAE) coating AlFeCoNiCuCr: Entwicklung und Mößbaueruntersuchung an der Hochentropie-PVD-CAE-Beschichtung AlFeCoNiCuCr, Mater Werkst, 47, 272, 10.1002/mawe.201600489 Juan, 2020, Designing rules of laser-clad high-entropy alloy coatings with simple solid solution phases, Acta Metall Sin, 33, 1064, 10.1007/s40195-020-01040-0 Gao, 2016 Zhu, 2021, Recent research and development status of laser cladding: a review, Opt Laser Technol, 138, 106915, 10.1016/j.optlastec.2021.106915 Sharma, 2021, High entropy alloy coatings and technology, Coatings, 11, 372, 10.3390/coatings11040372 Akilan, 2020, Laser powder bed fusion of in-situ composites using dry-mixed Ti6Al4V and Si3N4 powder, J Manuf Process, 59, 43, 10.1016/j.jmapro.2020.09.027 Singh, 2020, Manufacturing and performance analysis of mechanically alloyed magnetic abrasives for magneto abrasive flow finishing, J Manuf Process, 50, 161, 10.1016/j.jmapro.2019.12.033 Huang, 2014, Microstructure and corrosion resistance of Cu0·9NiAlCoCrFe high entropy alloy coating on AZ91D magnesium alloys by laser cladding, Mater Res Innov, 18, 10.1179/1432891714Z.000000000517 Wang, 2021, Effect of input powder attributes on optimized processing and as-built tensile properties in laser powder bed fusion of AlSi10Mg alloy, J Manuf Process, 64, 633, 10.1016/j.jmapro.2021.02.024 Ding, 2017, Preparation, characterization and properties of multicomponent AlCoCrFeNi2.1 powder by gas atomization method, J Alloys Compd, 721, 609, 10.1016/j.jallcom.2017.06.020 Tong, 2019, Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: effect of heat treatment on microstructure, residual stress and mechanical property, J Alloys Compd, 785, 1144, 10.1016/j.jallcom.2019.01.213 Raynova, 2019, Hybrid microwave sintering of blended elemental Ti alloys, J Manuf Process, 39, 52, 10.1016/j.jmapro.2019.02.002 Zhang, 2016, Evolution of the microstructure and properties of laser-clad FeCrNiCoB x high-entropy alloy coatings, Mater Sci Technol, 32, 1666, 10.1080/02670836.2015.1138035 Cui, 2020, Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coatingw, Appl Surf Sci, 147205 Alshataif, 2019, Manufacturing methods, microstructural and mechanical properties evolutions of high-entropy alloys: a review, Met Mater Int, 1 Li, 2019, A review on high entropy alloys coatings: fabrication processes and property assessment, Adv Eng Mater, 21, 1900343, 10.1002/adem.201900343 Alaneme, 2016, Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: a review, J Mater Res Technol, 5, 384, 10.1016/j.jmrt.2016.03.004 Torralba, 2019, High-entropy alloys fabricated via powder metallurgy. A critical review, Powder Metall, 62, 84, 10.1080/00325899.2019.1584454 Meghwal, 2020, Thermal spray high-entropy alloy coatings: a review, J Therm Spray Technol, 29, 857, 10.1007/s11666-020-01047-0 Song, 2016, Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders, J Manuf Process, 24, 116, 10.1016/j.jmapro.2016.08.004 Mukherjee, 2021, Enhanced corrosion, tribocorrosion resistance and controllable osteogenic potential of stem cells on micro-rippled Ti6Al4V surfaces produced by pulsed laser remelting, J Manuf Process, 65, 119, 10.1016/j.jmapro.2021.03.023 Zhang, 2021, Effects of carbon fibers on the microstructure and properties of laser cladding 24CrNiMoY alloy steel, J Manuf Process, 62, 337, 10.1016/j.jmapro.2020.12.041 Alizadeh-Sh, 2020, Laser cladding of Inconel 718 powder on a non-weldable substrate: clad bead geometry-solidification cracking relationship, J Manuf Process, 56, 54, 10.1016/j.jmapro.2020.04.045 Zhu, 2020, Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology, J Manuf Process, 49, 344, 10.1016/j.jmapro.2019.12.009 Ning, 2020, Analytical modeling of in-situ deformation of part and substrate in laser cladding additive manufacturing of Inconel 625, J Manuf Process, 49, 135, 10.1016/j.jmapro.2019.11.013 Benoit, 2021, Processing window for laser metal deposition of Al 7075 powder with minimized defects, J Manuf Process, 64, 1484, 10.1016/j.jmapro.2021.02.031 Zhang, 2019, Laser cladding of iron-based erosion resistant metal matrix composites, J Manuf Process, 38, 63, 10.1016/j.jmapro.2019.01.001 El-Labban, 2015, Formation of VC-composite surface layer on high C–Cr bearing tool steel by laser surface cladding, J Manuf Process, 20, 190, 10.1016/j.jmapro.2015.08.004 Ahmed, 2019, Direct metal fabrication in rapid prototyping: a review, J Manuf Process, 42, 167, 10.1016/j.jmapro.2019.05.001 Guo, 2018, Microstructure and properties of Fe5Cr5SiTiCoNbMoW coating by laser cladding, Surf Eng, 34, 283, 10.1080/02670844.2016.1213784 Sun, 2019, Effect of shielding gas flow rate on cladding quality of direct laser fabrication AISI 316L stainless steel, J Manuf Process, 48, 51, 10.1016/j.jmapro.2019.10.011 Yan, 2019, Effect of thermal characteristics on distortion in laser cladding of AISI 316L, J Manuf Process, 44, 309, 10.1016/j.jmapro.2019.06.011 Garmendia, 2019, Structured light-based height control for laser metal deposition, J Manuf Process, 42, 20, 10.1016/j.jmapro.2019.04.018 Zhou, 2019, Direct laser deposited bulk CoCrFeNiNbx high entropy alloys, Intermetallics, 114, 106592, 10.1016/j.intermet.2019.106592 Jammal, 2020, Multi-scale modelling of solidification and microstructure evolution in laser-deposition of T15 high speed steel, J Manuf Process, 50, 24, 10.1016/j.jmapro.2019.12.024 Yong, 2017, A comparative study of vision detection and numerical simulation for laser cladding of nickel-based alloy, J Manuf Process, 28, 364, 10.1016/j.jmapro.2017.03.004 Hao, 2019, Effects of tilt angle between laser nozzle and substrate on bead morphology in multi-axis laser cladding, J Manuf Process, 43, 311, 10.1016/j.jmapro.2019.04.025 Lv, 2021, Investigation on the columnar-to-equiaxed transition during laser cladding of IN718 alloy, J Manuf Process, 67, 63, 10.1016/j.jmapro.2021.04.016 Kattire, 2015, Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications, J Manuf Process, 20, 492, 10.1016/j.jmapro.2015.06.018 Bennett, 2017, Thermal effect on clad dimension for laser deposited Inconel 718, J Manuf Process, 28, 550, 10.1016/j.jmapro.2017.04.024 Zhang, 2016, Numerical study on the effect of pressure and nozzle dimension on particle distribution and velocity in laser cladding under vacuum base on CFD, J Manuf Process, 23, 54, 10.1016/j.jmapro.2016.05.019 Gopinath, 2019, Role of molten pool thermo cycle in laser surface alloying of AISI 1020 steel with in-situ synthesized TiN, Surf Coat Technol, 362, 150, 10.1016/j.surfcoat.2019.01.104 Zhong, 2010, Laser surface cladding: the state of the art and challenges, Proc Inst Mech Eng C J Mech Eng Sci, 224, 1041, 10.1243/09544062JMES1782 Shi, 2020, Precise control of variable-height laser metal deposition using a height memory strategy, J Manuf Process, 57, 222, 10.1016/j.jmapro.2020.05.026 Wu, 2015, Phase evolution and properties of Al 2 CrFeNiMo x high-entropy alloys coatings by laser cladding, J Therm Spray Technol, 24, 1333, 10.1007/s11666-015-0303-6 Zhang, 2017, Synthesis and characterization of refractory TiZrNbWMo high-entropy alloy coating by laser cladding, Surf Coat Technol, 311, 321, 10.1016/j.surfcoat.2017.01.012 Chang, 2010, Mechanical properties, deformation behaviors and interface adhesion of (AlCrTaTiZr) Nx multi-component coatings, Surf Coat Technol, 204, 3307, 10.1016/j.surfcoat.2010.03.041 Wang, 2019, Microstructure and corrosion behavior of (CoCrFeNi) 95Nb5 high-entropy alloy coating fabricated by plasma spraying, Materials, 12, 694, 10.3390/ma12050694 Guo, 2020, In situ TiN-reinforced CoCr2FeNiTi0.5 high-entropy alloy composite coating fabricated by laser cladding, Rare Metals, 39, 1190, 10.1007/s12598-018-1194-8 Liang, 2021, Synthesis and characterization of directional array TiN-reinforced AlCoCrCuNiTi high-entropy alloy coating by magnetic-field-assisted laser cladding, J Mater Eng Perform, 1 Savinov, 2020, Microstructure and properties of CeO2-doped CoCrFeMnNi high entropy alloy fabricated by laser metal deposition, J Manuf Process, 56, 1245, 10.1016/j.jmapro.2020.04.018 Barekat, 2016, Nd: YAG laser cladding of Co–Cr–Mo alloy on γ-TiAl substrate, Opt Laser Technol, 80, 145, 10.1016/j.optlastec.2016.01.003 Fogagnolo, 2016, Surface stiffness gradient in Ti parts obtained by laser surface alloying with Cu and Nb, Surf Coat Technol, 297, 34, 10.1016/j.surfcoat.2016.04.025 Siddiqui, 2021, Recent trends in laser cladding and surface alloying, Opt Laser Technol, 134, 106619, 10.1016/j.optlastec.2020.106619 Zhang, 2011, Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding, Mater Des, 32, 1910, 10.1016/j.matdes.2010.12.001 Yue, 2014, Solidification behaviour in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substrates, J Alloys Compd, 587, 588, 10.1016/j.jallcom.2013.10.254 Liu, 2014, Laser cladding of high-entropy alloy on H13 steel, Rare Metals, 33, 727, 10.1007/s12598-014-0403-3 Li, 2020, Microstructure, mechanical, and corrosion resistance properties of Al0. 8CrFeCoNiCux high-entropy alloy coatings on aluminum by laser cladding, Mater Res Express, 7 Shi, 2018, Microstructure and properties of laser clad high-entropy alloy coating on aluminium, Mater Sci Technol, 34, 1239, 10.1080/02670836.2018.1444921 Shu, 2018, Effects of Fe-to-Co ratio on microstructure and mechanical properties of laser cladded FeCoCrBNiSi high-entropy alloy coatings, Appl Surf Sci, 450, 538, 10.1016/j.apsusc.2018.03.128 Li, 2017, Microstructural modification of laser-deposited high-entropy CrFeCoNiMoWC alloy by friction stir processing: Nanograin formation and deformation mechanism, Metall Mater Trans A, 48, 841, 10.1007/s11661-016-3875-y Sistla, 2015, Effect of Al/Ni ratio, heat treatment on phase transformations and microstructure of AlxFeCoCrNi2− x (x= 0.3, 1) high entropy alloys, Mater Des, 81, 113, 10.1016/j.matdes.2015.05.027 Ni, 2018, Characterization of Al0. 5FeCu0. 7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding, Opt Laser Technol, 105, 257, 10.1016/j.optlastec.2018.01.058 Liu, 2020, Effects of boron content on microstructure and wear properties of FeCoCrNiBx high-entropy alloy coating by laser cladding, Appl Sci, 10, 49, 10.3390/app10010049 Zhang, 2020, Effect of Fe on microstructure and properties of AlCoCrFexNi (x = 1.5, 2.5) high entropy alloy coatings prepared by laser cladding, Intermetallics, 119, 10.1016/j.intermet.2020.106722 Chao, 2017, Direct laser deposition cladding of AlxCoCrFeNi high entropy alloys on a high-temperature stainless steel, Surf Coat Technol, 332, 440, 10.1016/j.surfcoat.2017.09.072 Wen, 2020, Design and characterization of FeCrCoAlMn0. 5Mo0. 1 high-entropy alloy coating by ultrasonic assisted laser cladding, J Alloys Compd, 835, 155449, 10.1016/j.jallcom.2020.155449 Aguilar-Hurtado, 2020, Boron addition in a non-equiatomic Fe50Mn30Co10Cr10 alloy manufactured by laser cladding: microstructure and wear abrasive resistance, Appl Surf Sci, 146084 Qiu, 2014, Effect of Ti content on structure and properties of Al2CrFeNiCoCuTix high-entropy alloy coatings, J Alloys Compd, 585, 282, 10.1016/j.jallcom.2013.09.083 Zhang, 2011, Effects of annealing on the microstructure and properties of 6FeNiCoCrAlTiSi high-entropy alloy coating prepared by laser cladding, J Therm Spray Technol, 20, 1049, 10.1007/s11666-011-9626-0 Qiu, 2017, Corrosion performance of Al2CrFeCoxCuNiTi high-entropy alloy coatings in acid liquids, J Alloys Compd, 708, 353, 10.1016/j.jallcom.2017.03.054 Chang, 2019, Thermal stability and oxidation resistance of FeCrxCoNiB high-entropy alloys coatings by laser cladding, Surf Coat Technol, 359, 132, 10.1016/j.surfcoat.2018.12.072 Liu, 2020, Effect of heat treatment on phase stability and wear behavior of laser clad AlCoCrFeNiTi0. 8 high-entropy alloy coatings, Surf Coat Technol, 125758 Jin, 2018, High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating, Appl Surf Sci, 445, 113, 10.1016/j.apsusc.2018.03.135 Jiang, 2019, Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high-entropy alloy coatings fabricated by laser cladding, J Alloys Compd, 775, 1, 10.1016/j.jallcom.2018.10.091 Zhang, 2020, Effect of process parameters on the microstructure and properties of laser-clad FeNiCoCrTi 0.5 high-entropy alloy coating, Int J Miner Metall Mater, 27, 630, 10.1007/s12613-019-1958-7 Cai, 2018, Influence of dilution rate on the microstructure and properties of FeCrCoNi high-entropy alloy coating, Mater Des, 142, 124, 10.1016/j.matdes.2018.01.007 Shu, 2019, Effects of laser power on microstructure and properties of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coatings, Surf Coat Technol, 358, 667, 10.1016/j.surfcoat.2018.10.086 Huang, 2012, Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V substrate, Mater Des, 41, 338, 10.1016/j.matdes.2012.04.049 Xiang, 2020, Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding, Appl Surf Sci, 146214 Rahman Rashid, 2018, Metallurgical features of direct laser-deposited Ti6Al4V with trace boron, J Manuf Process, 35, 651, 10.1016/j.jmapro.2018.09.018 Gupta, 2012, Development and characterization of microwave composite cladding, J Manuf Process, 14, 243, 10.1016/j.jmapro.2012.05.007 Xie, 2020, Investigation on the laves phase formation during laser cladding of IN718 alloy by CA-FE, J Manuf Process, 52, 132, 10.1016/j.jmapro.2020.01.050 Chen, 2018, Simplification and experimental investigation of geometrical surface smoothness model for multi-track laser cladding processes, J Manuf Process, 36, 621, 10.1016/j.jmapro.2018.11.004 Gupta, 2014, Microwave cladding: a new approach in surface engineering, J Manuf Process, 16, 176, 10.1016/j.jmapro.2014.01.001 Liu, 2017, Research and development status of laser cladding on magnesium alloys: a review, Opt Lasers Eng, 93, 195, 10.1016/j.optlaseng.2017.02.007 Liu, 2021, Research and progress of laser cladding on engineering alloys: a review, J Manuf Process, 66, 341, 10.1016/j.jmapro.2021.03.061 Arrizubieta, 2017, Instantaneous powder flux regulation system for laser metal deposition, J Manuf Process, 29, 242, 10.1016/j.jmapro.2017.07.018 Froend, 2018, Process development for wire-based laser metal deposition of 5087 aluminium alloy by using fibre laser, J Manuf Process, 34, 721, 10.1016/j.jmapro.2018.06.033 Azeem, 2020, Influence of liquid nitrogen on residual circumferential distortion, weld penetration and delta-ferrite distribution in clamped tungsten inert gas welded butt joint of 316 stainless steel, SN Appl Sci, 2, 1, 10.1007/s42452-020-03446-y Ghorashi, 2019, Considering cyclic plasticity to predict residual stresses in laser cladding of Inconel 718 multi bead samples, J Manuf Process, 42, 149, 10.1016/j.jmapro.2019.05.002 Lei, 2019, Epitaxy and new stray grain formation mechanism during epitaxial laser melting deposition of Inconel 718 on directionally solidified nickel-based superalloys, J Manuf Process, 42, 11, 10.1016/j.jmapro.2019.04.016 Dada, 2021, Effect of laser parameters on the properties of high entropy alloys: a preliminary study, Mater Today Proc, 38, 756, 10.1016/j.matpr.2020.04.198 Weng, 2017, Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy, J Alloys Compd, 692, 989, 10.1016/j.jallcom.2016.09.071 Guo, 2018, MoFeCrTiWAlNb refractory high-entropy alloy coating fabricated by rectangular-spot laser cladding, Intermetallics, 102, 78, 10.1016/j.intermet.2018.09.005 Ye, 2011, The property research on high-entropy alloy AlxFeCoNiCuCr coating by laser cladding, Phys Procedia, 12, 303, 10.1016/j.phpro.2011.03.039 Liu, 2021, Microstructural evolution and properties of dual-layer CoCrFeMnTi0.2 high-entropy alloy coating fabricated by laser cladding, Opt Laser Technol, 134, 10.1016/j.optlastec.2020.106646 Tsai, 2013, Physical properties of high entropy alloys, Entropy, 15, 5338, 10.3390/e15125338 Liu, 2019, Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding, Surf Coat Technol, 361, 63, 10.1016/j.surfcoat.2019.01.044 Liu, 2019, Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding, Opt Laser Technol, 118, 140, 10.1016/j.optlastec.2019.05.006 Cui, 2019, Fabrication of AlCoCrFeNi high-entropy alloy coating on an AISI 304 substrate via a CoFe2Ni intermediate layer, Entropy, 21, 2, 10.3390/e21010002 Dada, 2020, Process optimization of high entropy alloys by laser additive manufacturing, Eng Rep, 2 Dada, 2020, Fabrication and hardness behaviour of high entropy alloys, 1581 Siddiqui, 2019, Geometrical characteristics in laser surface alloying of a high-entropy alloy, Lasers Eng, 43, 237 Ma, 2020, Modeling and optimization for laser cladding via multi-objective quantum-behaved particle swarm optimization algorithm, Surf Coat Technol, 381, 125129, 10.1016/j.surfcoat.2019.125129 Siddiqui, 2021 Siddiqui, 2020, Experimental and numerical study of laser surface alloying of AlxCu0. 5FeNiTi high entropy alloy, Int J Comput Mater Sci Surf Eng, 9, 212 Mishra, 2021, Some unique aspects of mechanical behavior of metastable transformative high entropy alloys, Metall Mater Trans A, 52, 889, 10.1007/s11661-021-06138-3 Santhanakrishnan, 2011, An experimentally based thermo-kinetic hardening model for high power direct diode laser cladding, J Mater Process Technol, 211, 1247, 10.1016/j.jmatprotec.2011.02.006 Baykasoğlu, 2020, A process-microstructure finite element simulation framework for predicting phase transformations and microhardness for directed energy deposition of Ti6Al4V, Addit Manuf, 35, 101252 Wall, 2020, Laser-coated CoFeNiCrAlTi high entropy alloy onto a H13 steel die head, Surf Coat Technol, 387, 125473, 10.1016/j.surfcoat.2020.125473 Ley, 2018, Laser coating of a CrMoTaWZr complex concentrated alloy onto a H13 tool steel die head, Surf Coat Technol, 348, 150, 10.1016/j.surfcoat.2018.02.038 Li, 2021, The relationship between thermo-mechanical history, microstructure and mechanical properties in additively manufactured CoCrFeMnNi high entropy alloy, J Mater Sci Technol, 77, 187, 10.1016/j.jmst.2020.10.052 Li, 2020, Characterization of residual stress in laser melting deposited CoCrFeMnNi high entropy alloy by neutron diffraction, Mater Lett, 263, 127247, 10.1016/j.matlet.2019.127247 Zhang, 2018, The thermal-mechanical behavior of WTaMoNb high-entropy alloy via selective laser melting (SLM): experiment and simulation, Int J Adv Manuf Technol, 96, 461, 10.1007/s00170-017-1331-9 Siddiqui, 2019, A study of metallurgy and erosion in laser surface alloying of AlxCu0. 5FeNiTi high entropy alloy, Surf Coat Technol, 361, 27, 10.1016/j.surfcoat.2019.01.042 Xu, 2020, Microstructure evolution and properties of laser cladding CoCrFeNiTiAlx high-entropy alloy coatings, Coatings, 10, 373, 10.3390/coatings10040373 Qi, 2019, High entropy alloys mined from binary phase diagrams, Sci Rep, 9, 1, 10.1038/s41598-019-50015-4 Juan, 2019, Modified criterions for phase prediction in the multi-component laser-clad coatings and investigations into microstructural evolution/wear resistance of FeCrCoNiAlMox laser-clad coatings, Appl Surf Sci, 465, 700, 10.1016/j.apsusc.2018.08.264 He, 2017, The phase evolution and property of FeCoCrNiAlTix high-entropy alloying coatings on Q253 via laser cladding, Coatings, 7, 157, 10.3390/coatings7100157 Mohanty, 2019, High temperature oxidation study of direct laser deposited AlXCoCrFeNi (X = 0.3, 0.7) high entropy alloys, Surf Coat Technol, 380, 10.1016/j.surfcoat.2019.125028 Gu, 2020, Microstructure and properties of laser cladding and CoCr2. 5FeNi2Tix high-entropy alloy composite coatings, J Alloys Compd, 819, 152986, 10.1016/j.jallcom.2019.152986 Chen, 2017, Fabrication and characterization of AlxCoFeNiCu1− x high entropy alloys by laser metal deposition, Coatings, 7, 47, 10.3390/coatings7040047 Gu, 2020, Microstructure and properties of MgMoNbFeTi2Yx high entropy alloy coatings by laser cladding, Surf Coat Technol, 126303 Gu, 2020, Microstructure and wear behavior of mechanically alloyed powder AlxMo0. 5NbFeTiMn2 high entropy alloy coating formed by laser cladding, Surf Coat Technol, 401, 126244, 10.1016/j.surfcoat.2020.126244 Jiang, 2019, Synthesis and characterization of AlCoCrFeNiNbx high-entropy alloy coatings by laser cladding, Crystals, 9, 56, 10.3390/cryst9010056 Sha, 2019, Microstructure and properties of high-entropy AlxCoCrFe2. 7MoNi alloy coatings prepared by laser cladding, Metals, 9, 1243, 10.3390/met9121243 Zhao, 2018, Slurry erosion behavior of AlxCoCrFeNiTi0. 5 high-entropy alloy coatings fabricated by laser cladding, Metals, 8, 126, 10.3390/met8020126 Lin, 2017, Tribological properties of FeCoCrNiAlB x high-entropy alloys coating prepared by laser cladding, J Iron Steel Res Int, 24, 184, 10.1016/S1006-706X(17)30026-2 Liang, 2020, Microstructure and tribological properties of AlCrFe2Ni2W0. 2Mo0. 75 high-entropy alloy coating by laser cladding in seawater, NaCl solution and deionized water, Surf Coat Technol, 126214, 10.1016/j.surfcoat.2020.126214 Cai, 2018, Microstructure and wear resistance of laser cladded Ni-Cr-Co-Ti-V high-entropy alloy coating after laser remelting processing, Opt Laser Technol, 99, 276, 10.1016/j.optlastec.2017.09.012 Zhang, 2020, Microstructure and wear resistance of TiAlNiSiV high-entropy laser cladding coating on Ti-6Al-4V, J Mater Process Technol, 116671 Katakam, 2014, Laser assisted high entropy alloy coating on aluminum: microstructural evolution, J Appl Phys, 116, 104906, 10.1063/1.4895137 Shon, 2015, Laser additive synthesis of high entropy alloy coating on aluminum: corrosion behavior, Mater Lett, 142, 122, 10.1016/j.matlet.2014.11.161 Zhang, 2016, Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance, Opt Laser Technol, 84, 23, 10.1016/j.optlastec.2016.04.011 Li, 2019, Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding, J Alloys Compd, 788, 485, 10.1016/j.jallcom.2019.02.223 Minghong, 2017, Effects of annealing on the microstructure and wear resistance of AlCoCrFeNiTi0. 5 high-entropy alloy coating prepared by laser cladding, Rare Metal Mater Eng, 46, 1237, 10.1016/S1875-5372(17)30143-1 Wu, 2017, Phase evolution characteristics and corrosion behavior of FeCoCrAlCu-X0. 5 coatings on cp Cu by laser high-entropy alloying, Opt Laser Technol, 94, 68, 10.1016/j.optlastec.2017.03.023 Wang, 2019, MoFe1. 5CrTiWAlNbx refractory high-entropy alloy coating fabricated by laser cladding, Intermetallics, 115, 10.1016/j.intermet.2019.106613 Ge, 2019, A review of Ab initio calculation on lattice distortion in high-entropy alloys, JOM, 71, 4225, 10.1007/s11837-019-03777-1 Owen, 2017, An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy, Acta Mater, 122, 11, 10.1016/j.actamat.2016.09.032 C. Lee, G. Song, M.C. Gao, R. Feng, P. Chen, J. Brechtl, Y. Chen, K. An, W. Guo, J.D. Poplawsky, Lattice distortion in a strong and ductile refractory high-entropy alloy, Acta Mater, 160 (2018) 158-172. Huang, 2013, Effects of annealing on the microstructure and hardness of laser cladding FeCoCrNiB high-entropy alloy coating, Surf Technol, 42, 9 Qiu, 2013, Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding, J Alloys Compd, 553, 216, 10.1016/j.jallcom.2012.11.100 Li, 2018, Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method, Intermetallics, 95, 110, 10.1016/j.intermet.2018.01.021 Qiu, 2018, Microstructure, hardness and corrosion resistance of Al2CoCrCuFeNiTix high-entropy alloy coatings prepared by rapid solidification, J Alloys Compd, 735, 359, 10.1016/j.jallcom.2017.11.158 Li, 2020, Microstructures and wear resistance of CoCrFeNi2V0. 5Tix high-entropy alloy coatings prepared by laser cladding, Crystals, 10, 352, 10.3390/cryst10050352 Zhang, 2011, Phase selection, microstructure and properties of laser rapidly solidified FeCoNiCrAl2Si coating, Intermetallics, 19, 1130, 10.1016/j.intermet.2011.03.017 Liang, 2019, Microstructures and wear resistance of AlCrFeNi 2 W 0.2 Nb x high-entropy alloy coatings prepared by laser cladding, J Therm Spray Technol, 28, 1318, 10.1007/s11666-019-00901-0 Wei, 2021, Effect of phase transformation on mechanical properties of Al16.80Co20.74Cr20.49Fe21.28Ni20.70 high entropy alloy coatings processed by laser cladding, J Alloys Compd, 862, 10.1016/j.jallcom.2020.158563 Jiang, 2018, Microstructure and mechanical properties investigation of the CoCrFeNiNbx high entropy alloy coatings, Crystals, 8, 409, 10.3390/cryst8110409 C. Wu, S. Zhang, C. Zhang, H. Zhang, S. Dong, Phase evolution and cavitation erosion-corrosion behavior of FeCoCrAlNiTix high entropy alloy coatings on 304 stainless steel by laser surface alloying, J Alloys Compd, 698 (2017) 761-770. Guo, 2018, Microstructure and properties of in-situ TiN reinforced laser cladding CoCr2FeNiTix high-entropy alloy composite coatings, Surf Coat Technol, 344, 353, 10.1016/j.surfcoat.2018.03.035 Zhang, 2011, Grain refinement and boundary misorientation transition by annealing in the laser rapid solidified 6FeNiCoCrAlTiSi multicomponent ferrous alloy coating, Surf Coat Technol, 205, 4068, 10.1016/j.surfcoat.2011.02.054 Zhang, 2014, Thermally stable laser cladded CoCrCuFeNi high-entropy alloy coating with low stacking fault energy, J Alloys Compd, 600, 210, 10.1016/j.jallcom.2014.02.121 Shu, 2020, Effects of line energy on microstructure and mechanical properties of CoCrFeNiBSi high-entropy alloy laser cladding coatings, J Therm Spray Technol, 1 Zhang, 2019, Microstructure evolution of Ni-Mo-Fe-Si quaternary metal silicide alloy composite coatings by laser cladding on pure Ni, J Alloys Compd, 785, 984, 10.1016/j.jallcom.2019.01.191 Pickering, 2016, High-entropy alloys: a critical assessment of their founding principles and future prospects, Int Mater Rev, 61, 183, 10.1080/09506608.2016.1180020 Mao, 2020, Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: a review, J Manuf Process, 53, 153, 10.1016/j.jmapro.2020.02.009 Menghani, 2021, Wear, erosion and corrosion behavior of laser cladded high entropy alloy coatings–a review, Mater Today Proc, 38, 2824, 10.1016/j.matpr.2020.08.763 Cui, 2020, Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature, Appl Surf Sci, 512, 145736, 10.1016/j.apsusc.2020.145736 Jiang, 2020, Microstructure and properties of CeO 2-modified FeCoCrAlNiTi high-entropy alloy coatings by laser surface alloying, J Mater Eng Perform, 1 Qiu, 2020, Microstructure and mechanical properties of CoCrFeNiMo high-entropy alloy coatings, J Mater Res Technol, 9, 5127, 10.1016/j.jmrt.2020.03.029 Shu, 2018, Structure and high-temperature property of amorphous composite coating synthesized by laser cladding FeCrCoNiSiB high-entropy alloy powder, J Alloys Compd, 731, 662, 10.1016/j.jallcom.2017.08.248 Samal, 2020, Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties, J Manuf Process, 59, 131, 10.1016/j.jmapro.2020.09.010 Ostovari Moghaddam, 2021, A novel intermediate temperature self-lubricating CoCrCu1-xFeNix high entropy alloy fabricated by direct laser cladding, Tribol Int, 156, 106857, 10.1016/j.triboint.2021.106857 Elmkhah, 2018, A new approach to improve the surface properties of H13 steel for metal forming applications by applying the TiAlN multi-layer coating, J Manuf Process, 32, 873, 10.1016/j.jmapro.2018.04.010 Broqvist, 2012, On wear resistance of tool steel, J Manuf Process, 14, 195, 10.1016/j.jmapro.2012.03.002 Adesina, 2018, Wear resistance performance of AlCrN and TiAlN coated H13 tools during friction stir welding of A2124/SiC composite, J Manuf Process, 33, 111, 10.1016/j.jmapro.2018.04.019 Tian, 2016, Microstructure and wear behavior of atmospheric plasma-sprayed AlCoCrFeNiTi high-entropy alloy coating, J Mater Eng Perform, 25, 5513, 10.1007/s11665-016-2396-6 Liu, 2019, Microstructure and properties of AlCoCrFeNiTi high-entropy alloy coating on AISI1045 steel fabricated by laser cladding, J Mater Eng Perform, 28, 1544, 10.1007/s11665-019-03949-9 Zhang, 2020, Preparation of diamond reinforced NiCoCrTi 0.5 Nb 0.5 high-entropy alloy coating by laser cladding: microstructure and wear behavior, J Therm Spray Technol, 1 Yang, 2021, Microstructure and corrosion resistance of stainless steel manufactured by laser melting deposition, J Manuf Process, 65, 418, 10.1016/j.jmapro.2021.03.051 Zhang, 2020 Marcus, 2011 Shi, 2018, Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance, Corros Sci, 133, 120, 10.1016/j.corsci.2018.01.030 Ye, 2017, Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating, Appl Surf Sci, 396, 1420, 10.1016/j.apsusc.2016.11.176 Luo, 2020, Selective laser melting of dual phase AlCrCuFeNix high entropy alloys: formability, heterogeneous microstructures and deformation mechanisms, Addit Manuf, 31, 100925 Zhang, 2014, Corrosion properties of AlxCoCrFeNiTi0· 5 high entropy alloys in 0· 5M H2SO4 aqueous solution, Mater Res Innov, 18, 10.1179/1432891714Z.000000000778 Kao, 2010, Electrochemical passive properties of AlxCoCrFeNi (x = 0, 0.25, 0.50, 1.00) alloys in sulfuric acids, Corros Sci, 52, 1026, 10.1016/j.corsci.2009.11.028 Zhang, 2020, Microstructure and properties of AlCoCrFeNiSi high-entropy alloy coating on AISI 304 stainless steel by laser cladding, J Mater Eng Perform, 29, 278, 10.1007/s11665-020-04586-3 Wang, 2017, Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication, J Alloys Compd, 694, 971, 10.1016/j.jallcom.2016.10.138 Hsu, 2005, Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, Mater Chem Phys, 92, 112, 10.1016/j.matchemphys.2005.01.001 Zhang, 2020, Investigation into corrosion and wear behaviors of laser-clad coatings on Ti6Al4V, Mater Res Express, 7 Qiu, 2013, Microstructure and corrosion resistance of AlCrFeCuCo high entropy alloy, J Alloys Compd, 549, 195, 10.1016/j.jallcom.2012.09.091 Kunce, 2015, Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping, J Alloys Compd, 648, 751, 10.1016/j.jallcom.2015.05.144 Zhang, 2021, Investigation on solid particles erosion resistance of laser cladded CoCrFeNiTi high entropy alloy coating, Intermetallics, 131, 107111, 10.1016/j.intermet.2021.107111 Xie, 2020, Cavitation erosion resistance of high-entropy FeCoCrNiMoXB0. 2 coatings cladded by laser, Surf Eng, 1 Kwok, 2001, Cavitation erosion–corrosion behaviour of laser surface alloyed AISI 1050 mild steel using NiCrSiB, Mater Sci Eng A, 303, 250, 10.1016/S0921-5093(00)01850-5 Yin, 2020, Ultrasonic cavitation erosion behavior of AlCoCrxCuFe high entropy alloy coatings synthesized by laser cladding, Materials, 13, 4067, 10.3390/ma13184067 Cai, 2019, High-temperature oxidation behavior of FeCoCrNiAlx high-entropy alloy coatings, Mater Res Express, 6, 126552, 10.1088/2053-1591/ab562d W. Cui, W. Li, W.-T. Chen, F. Liou, Laser metal deposition of an AlCoCrFeNiTi0. 5 high-entropy alloy coating on a Ti6Al4V substrate: microstructure and oxidation behavior, Crystals, 10 (2020) 638. Huang, 2011, Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy, Surf Coat Technol, 206, 1389, 10.1016/j.surfcoat.2011.08.063 Ghadami, 2021, Microstructural characteristics and oxidation behavior of the modified MCrAlX coatings: a critical review, Vacuum, 185, 10.1016/j.vacuum.2020.109980 Chen, 2020, High temperature oxidation behaviour of combustion flame sprayed CoNiCrAlY coatings, Surf Coat Technol, 385, 125431, 10.1016/j.surfcoat.2020.125431 Ghadami, 2021, A comprehensive study on the microstructure evolution and oxidation resistance of conventional and nanocrystalline MCrAlY coatings, Sci Rep, 11, 1, 10.1038/s41598-020-79323-w Li-Yan, 2020, High speed laser cladded Ti-Cu-NiCoCrAlTaY burn resistant coating and its oxidation behavior, Surf Coat Technol, 125697, 10.1016/j.surfcoat.2020.125697 Xu, 2020, High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process, Surf Coat Technol, 398, 126093, 10.1016/j.surfcoat.2020.126093 Liu, 2016, Microstructural evolution and growth kinetics of thermally grown oxides in plasma sprayed thermal barrier coatings, Prog Nat Sci Mater Int, 26, 103, 10.1016/j.pnsc.2016.01.004 Saremi, 2008, Microstructural analysis of YSZ and YSZ/Al2O3 plasma sprayed thermal barrier coatings after high temperature oxidation, Surf Coat Technol, 202, 3233, 10.1016/j.surfcoat.2007.11.029 Ma, 2020, Research progress of titanium-based high entropy alloy: methods, properties, and applications, Front Bioeng Biotechnol, 8, 1303, 10.3389/fbioe.2020.603522 Singh, 2018, Development and surface improvement of FDM pattern based investment casting of biomedical implants: a state of art review, J Manuf Process, 31, 80, 10.1016/j.jmapro.2017.10.026 Kumar, 2020, On ZnO nano particle reinforced PVDF composite materials for 3D printing of biomedical sensors, J Manuf Process, 60, 268, 10.1016/j.jmapro.2020.10.027 Singla, 2021, Selective laser melting of Ti6Al4V alloy: process parameters, defects and post-treatments, J Manuf Process, 64, 161, 10.1016/j.jmapro.2021.01.009 Kumar, 2021, The role of additive manufacturing for biomedical applications: a critical review, J Manuf Process, 64, 828, 10.1016/j.jmapro.2021.02.022 Huang, 2017, Microstructure and dry sliding wear behavior of laser clad AlCrNiSiTi multi-principal element alloy coatings, Rare Metals, 36, 562, 10.1007/s12598-017-0912-y Huang, 2011, Microstructure characterization of laser clad TiVCrAlSi high entropy alloy coating on Ti-6Al-4V substrate, 621 Cai, 2016, Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying, Mater Charact, 120, 229, 10.1016/j.matchar.2016.09.011 Guo, 2020, A novel biomedical high-entropy alloy and its laser-clad coating designed by a cluster-plus-glue-atom model, Mater Des, 196, 109085, 10.1016/j.matdes.2020.109085 Chang, 2012, 4-nm thick multilayer structure of multi-component (AlCrRuTaTiZr) Nx as robust diffusion barrier for Cu interconnects, J Alloys Compd, 515, 4, 10.1016/j.jallcom.2011.11.082 Tsai, 2008, Diffusion barrier properties of AlMoNbSiTaTiVZr high-entropy alloy layer between copper and silicon, Thin Solid Films, 516, 5527, 10.1016/j.tsf.2007.07.109 Zhang, 2016, Formation of core–shell structure in high entropy alloy coating by laser cladding, Appl Surf Sci, 363, 543, 10.1016/j.apsusc.2015.12.059 Focarete, 2018 Dak, 2020, A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application, J Manuf Process, 58, 377, 10.1016/j.jmapro.2020.08.019 Chen, 2018, Irradiation effects in high entropy alloys and 316H stainless steel at 300° C, J Nucl Mater, 510, 421, 10.1016/j.jnucmat.2018.08.031 Yeh, 2016, High-entropy coatings, 469 Tong, 2018, Evolution of local lattice distortion under irradiation in medium-and high-entropy alloys, Materialia, 2, 73, 10.1016/j.mtla.2018.06.008 Ayyagari, 2018, Low activation high entropy alloys for next generation nuclear applications, Materialia, 4, 99, 10.1016/j.mtla.2018.09.014 Barron, 2020, Towards V-based high-entropy alloys for nuclear fusion applications, Scr Mater, 176, 12, 10.1016/j.scriptamat.2019.09.028 Xian, 2017, A high-entropy V35Ti35Fe15Cr10Zr5 alloy with excellent high-temperature strength, Mater Des, 121, 229, 10.1016/j.matdes.2017.02.029 Shukla, 2019, Review of electromagnetic interference shielding materials fabricated by iron ingredients, Nanoscale Adv, 1, 1640, 10.1039/C9NA00108E Zhang, 2018, Electromagnetic interference shielding effectiveness of high entropy AlCoCrFeNi alloy powder laden composites, J Alloys Compd, 734, 220, 10.1016/j.jallcom.2017.11.044 Zhang, 2021, (Cr0. 2Mn0. 2Fe0. 2Co0. 2Mo0. 2) B: a novel high-entropy monoboride with good electromagnetic interference shielding performance in K-band, J Mater Sci Technol, 77, 58, 10.1016/j.jmst.2020.09.047 Zhang, 2019, FeCoNiSixAl0. 4 high entropy alloy powders with dual-phase microstructure: improving microwave absorbing properties via controlling phase transition, J Alloys Compd, 790, 179, 10.1016/j.jallcom.2019.03.152 Duan, 2020, FeCoNiCuAl high entropy alloys microwave absorbing materials: exploring the effects of different Cu contents and annealing temperatures on electromagnetic properties, J Alloys Compd, 848, 156491, 10.1016/j.jallcom.2020.156491 Kunce, 2013, Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS), Int J Hydrog Energy, 38, 12180, 10.1016/j.ijhydene.2013.05.071 Kunce, 2014, Microstructure and hydrogen storage properties of a TiZrNbMoV high entropy alloy synthesized using Laser Engineered Net Shaping (LENS), Int J Hydrog Energy, 39, 9904, 10.1016/j.ijhydene.2014.02.067 Kunce, 2017, Microstructures and hydrogen storage properties of LaNiFeVMn alloys, Int J Hydrog Energy, 42, 27154, 10.1016/j.ijhydene.2017.09.039 Li, 2020, Microstructure and property of Ni/WC/La2O3 coatings by ultrasonic vibration-assisted laser cladding treatment, Opt Lasers Eng, 125, 105848, 10.1016/j.optlaseng.2019.105848 Nair, 2019, Tribological behavior of microwave synthesized high entropy alloy claddings, Wear, 436, 203028, 10.1016/j.wear.2019.203028 Hu, 2020, Microstructure and properties of laser cladding NiCrBSi coating assisted by electromagnetic-ultrasonic compound field, Surf Coat Technol, 404, 126469, 10.1016/j.surfcoat.2020.126469 Dai, 2017, Microstructure evolution of phase separated Fe-Cu-Cr-C composite coatings by laser induction hybrid cladding, Surf Coat Technol, 324, 518, 10.1016/j.surfcoat.2017.06.032 Nair, 2018, High-performance microwave-derived multi-principal element alloy coatings for tribological application, Adv Eng Mater, 20, 1800163, 10.1002/adem.201800163 Pang, 2020, Simulation research on the thermal-mechanical coupling of YSZ thermal protective coatings prepared by laser-plasma composite heat source on the surface of high-intensity diesel engine cylinder head, Optik, 207, 164425, 10.1016/j.ijleo.2020.164425 Zhang, 2018, Preparation, structure, and properties of an AlCrMoNbZr high-entropy alloy coating for accident-tolerant fuel cladding, Surf Coat Technol, 347, 13, 10.1016/j.surfcoat.2018.04.037 Cui, 2020, Microstructure and corrosion properties of FeCoNiCrMn high entropy alloy coatings prepared by high speed laser cladding and ultrasonic surface mechanical rolling treatment, Mater Lett, 259, 126769, 10.1016/j.matlet.2019.126769 George, 2020, High entropy alloys: a focused review of mechanical properties and deformation mechanisms, Acta Mater, 188, 435, 10.1016/j.actamat.2019.12.015 Gao, 2017, Computational modeling of high-entropy alloys: structures, thermodynamics and elasticity, J Mater Res, 32, 3627, 10.1557/jmr.2017.366 Zhang, 2016, Thermal conductivity of Al–Cu–Mg–Si alloys: experimental measurement and CALPHAD modeling, Thermochim Acta, 635, 8, 10.1016/j.tca.2016.04.019 Wang, 2013, Atomic structure modeling of multi-principal-element alloys by the principle of maximum entropy, Entropy, 15, 5536, 10.3390/e15125536 Zhu, 2011, Numerical simulation of metallic powder flow in a coaxial nozzle in laser direct metal deposition, Opt Laser Technol, 43, 106, 10.1016/j.optlastec.2010.05.012 Bailey, 2017, Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses, J Mater Process Technol, 247, 223, 10.1016/j.jmatprotec.2017.04.020 Tamanna, 2019, Progress in numerical simulation of the laser cladding process, Opt Lasers Eng, 122, 151, 10.1016/j.optlaseng.2019.05.026 Liu, 2018, Geometry modeling of single track cladding deposited by high power diode laser with rectangular beam spot, Opt Lasers Eng, 100, 38, 10.1016/j.optlaseng.2017.07.008 Jain, 2020, Artificial neural network approach for microhardness prediction of eight component FeCoNiCrMnVAlNb eutectic high entropy alloys, Mater Sci Eng A, 797, 140059, 10.1016/j.msea.2020.140059 Ng, 2017, Recent progress in layered transition metal carbides and/or nitrides (MXenes) and their composites: synthesis and applications, J Mater Chem A, 5, 3039, 10.1039/C6TA06772G Yeh, 2018, Breakthrough applications of high-entropy materials, J Mater Res, 33, 3129, 10.1557/jmr.2018.283 Müller, 2019, On the oxidation mechanism of refractory high entropy alloys, Corros Sci, 159, 108161, 10.1016/j.corsci.2019.108161 Chen, 2018, Additive manufacturing of high-entropy alloys: a review, Entropy, 20, 937, 10.3390/e20120937 Qiu, 2018, Cryogenic deformation mechanism of CrMnFeCoNi high-entropy alloy fabricated by laser additive manufacturing process, Int J Light Mater Manuf, 1, 33 Gwalani, 2019, Laser additive manufacturing of compositionally graded AlCrFeMoVx (x = 0 to 1) high-entropy alloy system, Opt Laser Technol, 113, 330, 10.1016/j.optlastec.2019.01.009 Guan, 2019, Additive manufacturing of fine-grained and dislocation-populated CrMnFeCoNi high entropy alloy by laser engineered net shaping, Mater Sci Eng A, 761, 138056, 10.1016/j.msea.2019.138056 Welk, 2016, A combinatorial approach to the investigation of metal systems that form both bulk metallic glasses and high entropy alloys, JOM, 68, 1021, 10.1007/s11837-015-1779-8 Oses, 2020, High-entropy ceramics, Nat Rev Mater, 1 Olechowski, 2020, Technology readiness levels: shortcomings and improvement opportunities, Syst Eng, 23, 395, 10.1002/sys.21533