A review on additive manufacturing of polymer-fiber composites

Guo, 2013, Additive manufacturing: technology, applications and research needs, Front Mech Eng, 8, 215, 10.1007/s11465-013-0248-8

Horn, 2012, Overview of current additive manufacturing technologies and selected applications, Sci Progress, 95, 255, 10.3184/003685012X13420984463047

Wong, 2012, A review of additive manufacturing, ISRN Mech Eng, 2012, 10, 10.5402/2012/208760

Kumar, 2010, Composites by rapid prototyping technology, Mater Des, 31, 850, 10.1016/j.matdes.2009.07.045

Kalsoom, 2016, Recent developments in 3D printable composite materials, RSC Adv, 6, 60355, 10.1039/C6RA11334F

Gu, 2012, Laser additive manufacturing of metallic components: materials, processes and mechanisms, Int Mater Rev, 57, 133, 10.1179/1743280411Y.0000000014

Hofmann, 2014, 3D printing gets a boost and opportunities with polymer materials, ACS Macro Lett, 3, 382, 10.1021/mz4006556

Turner, 2014, A review of melt extrusion additive manufacturing processes: I. Process design and modeling, Rapid Prototyping J, 20, 192, 10.1108/RPJ-01-2013-0012

Ahn, 2002, Anisotropic material properties of fused deposition modeling ABS, Rapid Prototyping J, 8, 248, 10.1108/13552540210441166

Dinwiddie RB, Kunc V, Lindal JM, Post B, Smith RJ, Love L, et al. Infrared imaging of the polymer 3D-printing process. 2014. p. 910502–12.

Sun, 2008, Effect of processing conditions on the bonding quality of FDM polymer filaments, Rapid Prototyping J, 14, 72, 10.1108/13552540810862028

Ahn, 2009, Representation of surface roughness in fused deposition modeling, J Mater Process Technol, 209, 5593, 10.1016/j.jmatprotec.2009.05.016

Zhong, 2001, Short fiber reinforced composites for fused deposition modeling, Mater Sci Eng, A, 301, 125, 10.1016/S0921-5093(00)01810-4

Carneiro, 2015, Fused deposition modeling with polypropylene, Mater Des, 83, 768, 10.1016/j.matdes.2015.06.053

Shofner, 2003, Nanofiber-reinforced polymers prepared by fused deposition modeling, J Appl Polym Sci, 89, 3081, 10.1002/app.12496

Shofner, 2003, Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication, Compos A Appl Sci Manuf, 34, 1207, 10.1016/j.compositesa.2003.07.002

Gray, 1998, Effects of processing conditions on short TLCP fiber reinforced FDM parts, Rapid Prototyping J, 4, 14, 10.1108/13552549810197514

Ning, 2015, Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling, Compos B Eng, 80, 369, 10.1016/j.compositesb.2015.06.013

Tekinalp, 2014, Highly oriented carbon fiber–polymer composites via additive manufacturing, Compos Sci Technol, 105, 144, 10.1016/j.compscitech.2014.10.009

Matsuzaki, 2016, Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation, Sci Rep, 6, 23058, 10.1038/srep23058

Namiki M, Ueda M, Todoroki A, Hirano Y, Matsuzaki R. 3D printing of continuous fiber reinforced plastic. Proceedings of the Society of the Advancement of Material and Process Engineering; 2014.

Li, 2016, Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing, J Mater Process Technol, 238, 218, 10.1016/j.jmatprotec.2016.07.025

Yu, 2010, Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites, Compos A Appl Sci Manuf, 41, 499, 10.1016/j.compositesa.2009.12.006

Tian, 2016, Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites, Compos A Appl Sci Manuf, 88, 198, 10.1016/j.compositesa.2016.05.032

Melenka, 2016, Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures, Compos Struct, 153, 866, 10.1016/j.compstruct.2016.07.018

Mori, 2014, Dieless forming of carbon fibre reinforced plastic parts using 3D printer, Procedia Eng, 81, 1595, 10.1016/j.proeng.2014.10.196

Van Der Klift, 2015, 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens, Open J Compos Mater, 6, 18, 10.4236/ojcm.2016.61003

Huang, 2013, Additive manufacturing and its societal impact: a literature review, Int J Adv Manuf Technol, 67, 1191, 10.1007/s00170-012-4558-5

Mahindru, 2013, Review of rapid prototyping-technology for the future, Global J Comput Sci Technol., 13

Klosterman D, Chartoff R, Agarwala M, Fiscus I, Murphy J, Cullen S, et al. Direct Fabrication of Polymer Composite Structures with Cuwed LOM; 1999.

Klosterman, 1998, Interfacial characteristics of composites fabricated by laminated object manufacturing, Compos A Appl Sci Manuf, 29, 1165, 10.1016/S1359-835X(98)00088-8

Sonmez, 1998, Thermomechanical analysis of the laminated object manufacturing (LOM) process, Rapid Prototyping J, 4, 26, 10.1108/13552549810197541

Parandoush, 2017, Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites, Mater Des, 10.1016/j.matdes.2017.06.013

Ahn, 2012, Quantification of surface roughness of parts processed by laminated object manufacturing, J Mater Process Technol, 212, 339, 10.1016/j.jmatprotec.2011.08.013

Karalekas, 2004, Composite rapid prototyping: overcoming the drawback of poor mechanical properties, J Mater Process Technol, 153–154, 526, 10.1016/j.jmatprotec.2004.04.019

Lü, 2001, Improvements of Mechanical Properties by Reinforcements, 67

Sandoval, 2006, Functionalizing stereolithography resins: effects of dispersed multi-walled carbon nanotubes on physical properties, Rapid Prototyping J, 12, 292, 10.1108/13552540610707059

Karalekas, 2003, Study of the mechanical properties of nonwoven fibre mat reinforced photopolymers used in rapid prototyping, Mater Des, 24, 665, 10.1016/S0261-3069(03)00153-5

Zak, 1996, Viscosity analysis of photopolymer and glass-fibre composites for rapid layered manufacturing, Rapid Prototyping J, 2, 16, 10.1108/13552549610129773

Cheah, 1999, Mechanical characteristics of fiber-filled photo-polymer used in stereolithography, Rapid Prototyping J, 5, 112, 10.1108/13552549910278937

Gupta, 2002, Dual curing of carbon fiber reinforced photoresins for rapid prototyping, Polym Compos, 23, 1162, 10.1002/pc.10509

Llewellyn-Jones, 2016, 3D printed components with ultrasonically arranged microscale structure, Smart Mater Struct, 25, 10.1088/0964-1726/25/2/02LT01

Kim, 2014, 3D optical printing of piezoelectric nanoparticle-polymer composite materials, ACS Nano, 8, 9799, 10.1021/nn503268f

Guo, 2013, Solvent-cast three-dimensional printing of multifunctional microsystems, Small, 9, 4118, 10.1002/smll.201300975

Compton, 2014, 3D-printing of lightweight cellular composites, Adv Mater, 26, 5930, 10.1002/adma.201401804

Postiglione, 2015, Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling, Compos A Appl Sci Manuf, 76, 110, 10.1016/j.compositesa.2015.05.014

Bertrand, 2007, Ceramic components manufacturing by selective laser sintering, Appl Surf Sci, 254, 989, 10.1016/j.apsusc.2007.08.085

Shishkovsky, 2007, Alumina–zirconium ceramics synthesis by selective laser sintering/melting, Appl Surf Sci, 254, 966, 10.1016/j.apsusc.2007.09.001

Bourell, 1992, Selective laser sintering of metals and ceramics, Int J Powder Metall, 28, 369

Liu, 2007, Selective laser sintering of high-density alumina ceramic parts, 351

Agarwala, 1995, Direct selective laser sintering of metals, Rapid Prototyping J, 1, 26, 10.1108/13552549510078113

Chatterjee, 2003, An experimental design approach to selective laser sintering of low carbon steel, J Mater Process Technol, 136, 151, 10.1016/S0924-0136(03)00132-8

Das, 2003, Physical aspects of process control in selective laser sintering of metals, Adv Eng Mater, 5, 701, 10.1002/adem.200310099

Wang, 2002, Direct selective laser sintering of hard metal powders: experimental study and simulation, Int J Adv Manuf Technol, 19, 351, 10.1007/s001700200024

Kruth, 2004, Selective laser melting of iron-based powder, J Mater Process Technol, 149, 616, 10.1016/j.jmatprotec.2003.11.051

Song, 1997, Experimental study of the basic process mechanism for direct selective laser sintering of low-melting metallic powder, CIRP Ann – Manuf Technol, 46, 127, 10.1016/S0007-8506(07)60790-2

Childs, 2005, Selective laser sintering (melting) of stainless and tool steel powders: experiments and modelling, Proc Inst Mech Eng, Part B: J Eng Manuf, 219, 339, 10.1243/095440505X8109

Tan, 2003, Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends, Biomaterials, 24, 3115, 10.1016/S0142-9612(03)00131-5

Childs, 1999, Selective laser sintering of an amorphous polymer—simulations and experiments, Proc Inst Mech Eng, Part B: J Eng Manuf, 213, 333, 10.1243/0954405991516822

Bai, 2013, Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes, Polym Eng Sci, 53, 1937, 10.1002/pen.23459

Salmoria, 2011, Microstructural and mechanical characterization of PA12/MWCNTs nanocomposite manufactured by selective laser sintering, Polym Testing, 30, 611, 10.1016/j.polymertesting.2011.04.007

Yan, 2011, Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering, Compos Sci Technol, 71, 1834, 10.1016/j.compscitech.2011.08.013

Goodridge, 2011, Processing of a Polyamide-12/carbon nanofibre composite by laser sintering, Polym Testing, 30, 94, 10.1016/j.polymertesting.2010.10.011

Ajoku, 2006, Experimental measurement and finite element modelling of the compressive properties of laser sintered Nylon-12, Mater Sci Eng, A, 428, 211, 10.1016/j.msea.2006.05.019

Caulfield, 2007, Dependence of mechanical properties of polyamide components on build parameters in the SLS process, J Mater Process Technol, 182, 477, 10.1016/j.jmatprotec.2006.09.007

Childs, 2000, Simulation and experimental verification of crystalline polymer and direct metal selective laser sintering, 100

Kim, 2004, Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite, Polym Testing, 23, 629, 10.1016/j.polymertesting.2004.01.014

Zarringhalam, 2006, Effects of processing on microstructure and properties of SLS Nylon 12, Mater Sci Eng, A, 435, 172, 10.1016/j.msea.2006.07.084

Rimell, 2000, Selective laser sintering of ultra high molecular weight polyethylene for clinical applications, J Biomed Mater Res, 53, 414, 10.1002/1097-4636(2000)53:4<414::AID-JBM16>3.0.CO;2-M

Hao, 2006, Selective laser sintering of hydroxyapatite reinforced polyethylene composites for bioactive implants and tissue scaffold development, Proc Inst Mech Eng [H], 220, 521, 10.1243/09544119JEIM67

Salmoria, 2007, Rapid manufacturing of polyethylene parts with controlled pore size gradients using selective laser sintering, Mater Res, 10, 211, 10.1590/S1516-14392007000200019

Schmidt, 2007, Selective laser sintering of PEEK, CIRP Ann – Manuf Technol, 56, 205, 10.1016/j.cirp.2007.05.097

Kruth, 2007, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann – Manuf Technol, 56, 730, 10.1016/j.cirp.2007.10.004

Williams, 2005, Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering, Biomaterials, 26, 4817, 10.1016/j.biomaterials.2004.11.057

Kruth, 2005, Binding mechanisms in selective laser sintering and selective laser melting, Rapid Prototyping J, 11, 26, 10.1108/13552540510573365

Shahzad, 2014, Additive manufacturing of zirconia parts by indirect selective laser sintering, J Eur Ceram Soc, 34, 81, 10.1016/j.jeurceramsoc.2013.07.023

Kruth, 2007, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann – Manuf Technol, 56, 730, 10.1016/j.cirp.2007.10.004

Yuan, 2016, Material evaluation and process optimization of CNT-coated polymer powders for selective laser sintering, Polymers, 8, 370, 10.3390/polym8100370

Bai, 2015, Thermal influence of CNT on the polyamide 12 nanocomposite for selective laser sintering, Molecules, 20, 19041, 10.3390/molecules201019041

Chung, 2006, Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering, Mater Sci Eng, A, 437, 226, 10.1016/j.msea.2006.07.112

Zhu, 2016, A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites, Sci Rep, 6, 33780, 10.1038/srep33780

Tibbits, 2014, 4D printing: multi-material shape change, Arch Des, 84, 116

Ge, 2013, Active materials by four-dimension printing, Appl Phys Lett, 103, 131901, 10.1063/1.4819837

Tibbits, 2012, Programmable materials for architectural assembly and automation, Assembly Autom, 32, 216, 10.1108/01445151211244348

Gladman, 2016, Biomimetic 4D printing, Nat Mater

Piggott, 1994, Short fibre polymer composites: a fracture-based theory of fibre reinforcement, J Compos Mater, 28, 588, 10.1177/002199839402800701

Templeton, 1990, Strength predictions of injection molding compounds, J Reinf Plast Compos, 9, 210, 10.1177/073168449000900301

Fu, 1996, Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers, Compos Sci Technol, 56, 1179, 10.1016/S0266-3538(96)00072-3

Kelly, 1965, Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum, J Mech Phys Solids, 13, 329, 10.1016/0022-5096(65)90035-9

Halpin, 1969, Stiffness and expansion estimates for oriented short fiber composites, J Compos Mater, 3, 732, 10.1177/002199836900300419

Fornes, 2003, Modeling properties of nylon 6/clay nanocomposites using composite theories, Polymer, 44, 4993, 10.1016/S0032-3861(03)00471-3

Tandon, 1984, The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites, Polym Compos, 5, 327, 10.1002/pc.750050413

Mori, 1973, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metall, 21, 571, 10.1016/0001-6160(73)90064-3

Barbero, 2010

Reddy, 1987, A generalization of two-dimensional theories of laminated composite plates, Commun Appl Numer Methods, 3, 173, 10.1002/cnm.1630030303

Rodriguez, 2000, Characterization of the mesostructure of fused-deposition acrylonitrile-butadiene-styrene materials, Rapid Prototyping J, 6, 175, 10.1108/13552540010337056

Melenka, 2015, Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer, Rapid Prototyping J, 21, 618, 10.1108/RPJ-09-2013-0093

Gu, 2002, Fabrication of Biomedical Prototypes with Locally Controlled Properties Using FDM, CIRP Ann – Manuf Technol, 51, 181, 10.1016/S0007-8506(07)61495-4

Rodríguez, 2003, Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling, Rapid Prototyping J, 9, 219, 10.1108/13552540310489604

Li, 2002, Composite modeling and analysis for fabrication of FDM prototypes with locally controlled properties, J Manuf Processes, 4, 129, 10.1016/S1526-6125(02)70139-4

Notta-Cuvier, 2014, An original approach for mechanical modelling of short-fibre reinforced composites with complex distributions of fibre orientation, Compos A Appl Sci Manuf, 62, 60, 10.1016/j.compositesa.2014.03.016

Modniks, 2013, Modeling the non-linear deformation of a short-flax-fiber-reinforced polymer composite by orientation averaging, Compos B Eng, 54, 188, 10.1016/j.compositesb.2013.04.058

Kanouté, 2009, Multiscale methods for composites: a review, Arch Comput Methods Eng, 16, 31, 10.1007/s11831-008-9028-8

Weinan, 2007, Heterogeneous multiscale methods: a review, Commun Comput Phys, 2, 367

Zhu, 2003, Prediction of the failure properties of short fiber reinforced composites with metal and polymer matrix, Comput Mater Sci, 28, 743, 10.1016/j.commatsci.2003.08.028

Pineda, 2013, Progressive failure of a unidirectional fiber-reinforced composite using the method of cells: Discretization objective computational results, Int J Solids Struct, 50, 1203, 10.1016/j.ijsolstr.2012.12.003

Zhang, 2013, Finite element analysis of 3D braided composites based on three unit-cells models, Compos Struct, 98, 130, 10.1016/j.compstruct.2012.11.003