A review of thermal management and innovative cooling strategies for data center

Ebrahimi, 2014, A review of data center cooling technology, operating conditions and the corresponding low-grade waste heat recovery opportunities, Renew. Sustain. Energy Rev., 31, 622, 10.1016/j.rser.2013.12.007 Nada, 2016, Numerical investigation and parametric study for thermal and energy management enhancements in data centers’ buildings, Appl. Therm. Eng., 98, 110, 10.1016/j.applthermaleng.2015.12.020 Douchet, 2015 Cho, 2012, Viability of datacenter cooling systems for energy efficiency in temperate or subtropical regions : case study, Energy Build., 55, 189, 10.1016/j.enbuild.2012.08.012 Garimella, 2012, Thermal management challenges in telecommunication systems and data centers, IEEE Trans. Componen. Packag. Manuf. Technol., 2, 1307, 10.1109/TCPMT.2012.2185797 Koomey, 2010 The Climate Group, 2008, SMART 2020: enabling the low carbon economy in the information age, Group, 30, 1 The Green Grid, 2007 Tschudi, 2010, Ere: a metric for measuring the benefit of reuse energy from a editor, Star Brady, 2013, A case study and critical assessment in calculating power usage effectiveness for a data centre, Energy Convers. Manag., 76, 155, 10.1016/j.enconman.2013.07.035 Greenberg, 2006, Best practices for data centers: lessons learned from benchmarking 22 data centers T, Aceee, sUMMER, 76 Rambo, 2007, Modeling of data center airflow and heat transfer: state of the art and future trends, Distrib. Parallel Databases, 21, 193, 10.1007/s10619-006-7007-3 Marcinichen, 2012, On-chip two-phase cooling of datacenters: cooling system and energy recovery evaluation, Appl. Therm. Eng., 41, 36, 10.1016/j.applthermaleng.2011.12.008 ETSI, 2009, vol. 2, 1 Ashrae, 2011, Thermal guidelines for data processing environments – expanded data center, Data Process., 1 Power Emerson Network, 2007 J. Niemann, K. Brown, and V. Avelar, Impact of Hot and Cold Aisle Containment on Data Center Temperature and Efficiency. Singhal, 2005, An experimentally validated thermo-mechanical model for the prediction of thermal contact conductance, Int. J. Heat. Mass. Transf., 48, 5446, 10.1016/j.ijheatmasstransfer.2005.06.028 Harirchian, 2010, A comprehensive flow regime map for microchannel flow boiling with quantitative transition criteria, Int. J. Heat. Mass. Transf., 53, 2694, 10.1016/j.ijheatmasstransfer.2010.02.039 “Bicsi.” [Online]. Available: https://www.bicsi.org/uploadedfiles/BICSI_Summits/Spring2/balt_11/Passive Air Flow Management in the Data Center - Lylette Macdonald - Legrand-Ortronics.pdf. Zhang, 2014, Free cooling of data centers: a review, Renew. Sustain. Energy Rev., 35, 171, 10.1016/j.rser.2014.04.017 Potts, 2010 Chen, 2012, Study of ventilation cooling technology for telecommunication base stations: control strategy and application strategy, Energy Build., 50, 212, 10.1016/j.enbuild.2012.03.040 Niemann, 2013 Dunnavant, 2011, ASHRAE J. Bao, 2012, The applied effect analysis of heat exchanger installed in a typical communication base station in Beijing of China, Energy Procedia, 14, 620, 10.1016/j.egypro.2011.12.985 Capozzoli, 2015, Cooling systems in data centers: state of art and emerging technologies, Energy Procedia, 83, 484, 10.1016/j.egypro.2015.12.168 Li, 2014, Coordinating liquid and free air cooling with workload allocation for data center power minimization, 249 Zimmermann, 2012, Aquasar: a hot water cooled data center with direct energy reuse, Energy, 43, 237, 10.1016/j.energy.2012.04.037 Almoli, 2012, Computational fluid dynamic investigation of liquid rack cooling in data centres, Appl. Energy, 89, 150, 10.1016/j.apenergy.2011.02.003 Haywood, 2015, The relationship among CPU utilization, temperature, and thermal power for waste heat utilization, Energy Convers. Manag., 95, 297, 10.1016/j.enconman.2015.01.088 Baonga, 2006, Experimental study of the hydrodynamic and heat transfer of free liquid jet impinging a flat circular heated disk, Appl. Therm. Eng., 26, 1125, 10.1016/j.applthermaleng.2005.11.001 Valiorgue, 2009, Heat transfer mechanisms in an impinging synthetic jet for a small jet-to-surface spacing, Exp. Therm. Fluid. Sci., 33, 597, 10.1016/j.expthermflusci.2008.12.006 Samba, 2013, Two-phase thermosyphon loop for cooling outdoor telecommunication equipments, Appl. Therm. Eng., 50, 1351, 10.1016/j.applthermaleng.2012.05.023 Chaudhry, 2012, A review of heat pipe systems for heat recovery and renewable energy applications, Renew. Sustain. Energy Rev., 16, 2249, 10.1016/j.rser.2012.01.038 H. Jouhara and R. Meskimmon, Heat Pipe based Thermal Management Systems for Energy-Efficient Data Centres. Nemec, 2013, Mathematical model for heat transfer limitations of heat pipe, Math. Comput. Model., 57, 126, 10.1016/j.mcm.2011.06.047 Singh, 2011, Heat pipe based cold energy storage systems for datacenter energy conservation, Energy, 36, 2802, 10.1016/j.energy.2011.02.021 Ling, 2015, vol. 59, 198 Zhang, 2015, Integrated system of mechanical refrigeration and thermosyphon for free cooling of data centers, Appl. Therm. Eng., 75, 185, 10.1016/j.applthermaleng.2014.09.060 Han, 2013, Development of an integrated air conditioner with thermosyphon and the application in mobile phone base station, Int. J. Refrig., 36, 58, 10.1016/j.ijrefrig.2012.09.012 Wang, 2015, Analysis on energy efficiency of an integrated heat pipe system in data centers, Appl. Therm. Eng., 90, 937, 10.1016/j.applthermaleng.2015.07.078 Petit, 2008, Dissipation thermique dans les systèmes électroniques, Tech. l’Ingénieur, 33, 1 Almaneea, 2014, Cooling system analysis for a data center using liquid immersed servers, Int. J. Therm. Technol., 4, 200 Warrier, 2012, Novel heat transfer fluids for direct immersion phase change cooling of electronic systems, Int. J. Heat. Mass. Transf., 55, 3379, 10.1016/j.ijheatmasstransfer.2012.02.063 Tuma, 2010, The merits of open bath immersion cooling of datacom equipment April, Annu. IEEE Semicond. Therm. Meas. Manag. Symp., 123 Endo, 2013, Effect of climatic conditions on energy consumption in direct fresh-air container data centers 2013, 2013 Int. Green Comput. Conf. Proceedings, IGCC, 6, 17 Akeiber, 2016, A review on phase change material (PCM) for sustainable passive cooling in building envelopes, Renew. Sustain. Energy Rev., 60, 1470, 10.1016/j.rser.2016.03.036 Sun, 2014, A study on the use of phase change materials (PCMs) in combination with a natural cold source for space cooling in telecommunications base stations (TBSs) in China, Appl. Energy, 117, 95, 10.1016/j.apenergy.2013.12.010 Sundaram, 2010, An experimental investigation on passive cooling system comprising phase change material and two-phase closed thermosyphon for telecom shelters in tropical and desert regions, Energy Build., 42, 1726, 10.1016/j.enbuild.2010.05.008 Kaiser, 2011, 1 Garday, 2007 Oró, 2018, Design and economic analysis of liquid cooled data centres for waste heat recovery: a case study for an indoor swimming pool, Sustain. Cities Soc., 36, 185, 10.1016/j.scs.2017.10.012