A review of the mechanism of bonding in densified biomass pellets

Gersen-Gondelach, 2014, Competing uses of biomass: assessment and comparison of the performance of biobased heat, power, fuels and materials, Renew Sustain Energy Rev, 40, 964, 10.1016/j.rser.2014.07.197 Anukam, 2016, Pre-processing of sugarcane bagasse for gasification in a downdraft biomass gasifier system: a comprehensive review, Renew Sustain Energy Rev, 66, 775, 10.1016/j.rser.2016.08.046 Gilvari, 2019, Quality parameters relevant for densification of bio-materials: measuring methods and affecting factors–a review, Biomass Bioenergy, 120, 117, 10.1016/j.biombioe.2018.11.013 Gilvari, 2020, Breakage behavior of biomass pellets: an experimental and numerical study, Comp. Part. Mech., 1 Kaliyan, 2008, Binding mechanism of corn stover and switchgrass in briquettes and pellets, Proceedings of the American Society of Agricultural and Biological Engineers Annual International Meeting, 7, 4388 Anukam, 2019, Improving the understanding of the bonding mechanism of primary components of biomass pellets through the use of advanced analytical instruments, J Wood Chem Technol, 40, 15, 10.1080/02773813.2019.1652324 Anukam, 2019, Characterization of pure and blended pellets made from Norway spruce and pea starch: a comparative study of bonding mechanism relevant to quality, Energies, 12, 1, 10.3390/en12234415 Frodeson, 2018, Pelletizing pure biomass substances to investigate the mechanical properties and bonding mechanisms, BioResources, 13, 1202 Mobarak, 1982, Binderless lignocellulose composite from bagasse and mechanism of self-bonding, Holzforschung, 36, 131, 10.1515/hfsg.1982.36.3.131 Back, 1987, The bonding mechanism in hardboard manufacture, Holzforschung, 41, 247, 10.1515/hfsg.1987.41.4.247 Mani, 2003, An overview of compaction of biomass grinds, Powder Handling Process, 15, 160 Gray, 1968, Compaction after deposition, 89 Browne, 1929, Nature of adhesion between glue and wood 1: a criticism of the hypothesis that the strength of glued wood joints is due chiefly to mechanical adhesion, Ind Eng Chem, 21, 80, 10.1021/ie50229a023 Henriksen, 2008, Fundamental understanding of pelletization Fengel, 1983 Kaliyan, 2010, Natural binders and solid bridge type binding mechanisms in briquettes and pellets made from corn stover and switchgrass, Bioresour Technol, 101, 1082, 10.1016/j.biortech.2009.08.064 Harun, 2015, Chemical and mechanical properties of pellets made from agricultural and woody biomass blends, Trans ASABE, 58, 921 Philipson, 1971 Barnett, 1981, Secondary xylem cell development, 47 Iqbal, 1990, Cambial concept and organization, 1 Catesson, 1994, Cambial ultrastructure and biochemistry: changes in relation to vascular tissue differentiation and the seasonal cycle, Int J Plant Sci, 155, 251, 10.1086/297165 Larson, 1994 Liu, 2014, Preparation and characterization of fuel pellets from woody biomass, agro-residues and their corresponding hydrochars, Appl Energy, 113, 1315, 10.1016/j.apenergy.2013.08.087 Anukam, 2016, Characterization and the effect of lignocellulosic biomass value addition on gasification efficiency, Energy Explor Exploit, 34, 865, 10.1177/0144598716665010 Lumen Barsett, 2005 Ding, 2006, The maize primary cell wall microfibril: a new model derived from direct visualization, J Agric Food Chem, 54, 597, 10.1021/jf051851z 2008, Sugarcane bagasse, Proc. S. Afr. Sug. Technol. Ass., 81, 266 Khenblouche, 2019, Extraction and characterization of cellulose microfibers from Retama raetam stems, Polímeros, 29, 1, 10.1590/0104-1428.05218 Tursi, 2019, A review on biomass: importance, chemistry, classification, and conversion, Biofuel Res. J., 22, 962, 10.18331/BRJ2019.6.2.3 Niskanen, 1998 Sun, 2004, Fractional extraction and structural characterization of sugarcane bagasse hemicelluloses, Carbohydr Polym, 56, 195, 10.1016/j.carbpol.2004.02.002 Wang Mohtar, 2017, An ionic liquid treatment and fractionation of cellulose, hemicellulose and lignin from oil palm empty fruit bunch, Carbohydr Polym, 166, 291, 10.1016/j.carbpol.2017.02.102 Carpenter, 2014, Biomass feedstocks for renewable fuel production: a review of the impacts of feedstock and pretreatment on the yield and product distribution of fast pyrolysis bio-oils and vapors, Green Chem, 16, 384, 10.1039/C3GC41631C Frodeson S. Factors that affect the production of high quality wood fuel pellets (Unpublished results [a]). Fengel, 1983 Lawoko, 2006, Characterisation of lignin carbohydrate complexes (LCCs) of spruce wood (Picea abies L.) isolated with two methods, Holzforschung, 60, 156, 10.1515/HF.2006.025 Wang Amen-Chen, 2001, Production of monomeric phenols by thermochemical conversion of biomass: a review, Bioresour Technol, 79, 277, 10.1016/S0960-8524(00)00180-2 Abejón, 2018, Alternatives for chemical and biochemical lignin valorization: hot topics from a bibliometric analysis of the research published during the 2000-2016 period, Processes, 6, 98, 10.3390/pr6080098 Welker, 2015, Engineering plant biomass lignin content and composition for biofuels and bioproducts, Energies, 8, 7654, 10.3390/en8087654 Laurichesse, 2014, Chemical modification of lignins: towards biobased polymers, Prog Polym Sci, 39, 1266, 10.1016/j.progpolymsci.2013.11.004 Frodeson S., Anukam A., Berghel J., Ståhl M., Henriksson G., Kudahettige Nilsson R.L. Densification of wood – influence on mechanical and chemical properties when 11 naturally occurring substances in wood are mixed with beech and pine (Unpublished results [b]). Karkania, 2012, Review of sustainable biomass pellets production–A study for agricultural residues pellets' market in Greece, Renew Sustain Energy Rev, 16, 1426, 10.1016/j.rser.2011.11.028 Ståhl, 2016, Energy efficiency, greenhouse gas emissions and durability when using additives in the wood fuel pellet chain, Fuel Process Technol, 152, 350, 10.1016/j.fuproc.2016.06.031 Lehtikangas, 2001, Quality properties of pelletised sawdust, logging residues and bark, Biomass Bioenergy, 20, 351, 10.1016/S0961-9534(00)00092-1 2005 2010 2006 Berghel, 2013, The effects of kraft lignin additives on wood fuel pellet quality, energy use and shelf life, Fuel Process Technol, 112, 64, 10.1016/j.fuproc.2013.02.011 Persson, 2013, Emissions and deposit properties from combustion of wood pellet with magnesium additives, J Fuel Chem Technol, 41, 1, 10.1016/S1872-5813(13)60029-8 Stahl, 2012, Effects on pellet properties and energy use when starch is added in the wood–fuel pelletizing process, Energy Fuels, 26, 1937, 10.1021/ef201968r Tumuluru, 2010, Quality of wood pellets produced in British Columbia for export, Appl Eng Agric, 26, 1013, 10.13031/2013.35902 Holm, 2006, Toward an understanding of controlling parameters in softwood and hardwood pellets production, Energy Fuels, 20, 2686, 10.1021/ef0503360 Holm, 2007, Experimental verification of novel pellet model using a single pelleter unit, Energy Fuels, 21, 2446, 10.1021/ef070156l Reza, 2012, Pelletization of biochar from hydrothermally carbonized wood, Environ Prog Sustain Energy, 31, 225, 10.1002/ep.11615 Frodeson, 2019, Effects of moisture content during densification of biomass pellets, focusing on polysaccharide substances, Biomass Bioenergy, 122, 322, 10.1016/j.biombioe.2019.01.048 Agar, 2018, A systematic study of ring-die pellet production from forest and agricultural biomass, Fuel Process Technol, 180, 47, 10.1016/j.fuproc.2018.08.006 Harun, 2018, Process and energy analysis of pelleting agricultural and woody biomass blends, Sustainability, 10, 1 Whittaker, 2017, Factors affecting wood, energy grass and straw pellet durability–A review, Renew Sustain Energy Rev, 71, 1, 10.1016/j.rser.2016.12.119 Wang, 2017, Pelletizing properties of wheat straw blending with rice straw, Energy Fuels, 31, 5126, 10.1021/acs.energyfuels.7b00097 Huang, 2017, Biofuel pellets made at low moisture content–influence of water in the binding mechanism of densified biomass, Biomass Bioenergy, 98, 8, 10.1016/j.biombioe.2017.01.002 Roffael, 2016, Significance of wood extractives for wood bonding, Appl Microbiol Biotechnol, 100, 1589, 10.1007/s00253-015-7207-8 Rudolfsson, 2015, Process optimization of combined biomass torrefaction and pelletization for fuel pellet production–A parametric study, Appl Energy, 140, 378, 10.1016/j.apenergy.2014.11.041 Kong, 2013, Intertwining action of additional fiber in preparation of waste sawdust for biofuel pellets, Biomass Bioenergy, 59, 151, 10.1016/j.biombioe.2013.10.014 Ramirez-Gomez, 2016, Research needs on biomass characterization to prevent handling problems and hazards in industry, Part Sci Technol, 34, 432, 10.1080/02726351.2016.1138262 Stelte, 2012, Recent developments in biomass pelletization–A review, BioResources, 7, 4451, 10.15376/biores.7.3.4451-4490 Sjostrom, 1993 Frodeson, 2019, Compression of biomass substances–A study on springback effects and color formation in pellet manufacture, Appl Sci, 9, 1, 10.3390/app9204302 Tumuluru, 2016, Method to produce durable pellets at lower energy consumption using high moisture corn stover and a corn starch binder in a flat die pellet mill, JoVE, 15, 1 2018 Zhang, 2020, Effects of brown sugar water binder added by spraying method as solid bridge on the physical characteristics of biomass pellets, Polymers, 12, 674, 10.3390/polym12030674 Ju, 2020, A method of adding binder by high-pressure spraying to improve the biomass densification, Polymers, 12, 2374, 10.3390/polym12102374 Shui, 2020, Development of a torrefied wood pellet binder from the cross-linking between specified risk materials-derived peptides and epoxidized poly (vinyl alcohol), Renew Energy, 162, 71, 10.1016/j.renene.2020.08.008 Riva, 2019, Analysis of optimal temperature, pressure and binder quantity for the production of biocarbon pellet to be used as a substitute for coke, Appl Energy, 256, 113933, 10.1016/j.apenergy.2019.113933 Cui, 2019, Experimental investigation on the energy consumption, physical, and thermal properties of a novel pellet fuel made from wood residues with microalgae as a binder, Energies, 12, 1, 10.3390/en12183425 Ahn, 2014, Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdust, Renew Energy, 62, 18, 10.1016/j.renene.2013.06.038 Lehmann, 2012, Effect of miscanthus addition and different grinding processes on the quality of wood pellets, Biomass Bioenergy, 44, 150, 10.1016/j.biombioe.2012.05.009 Ståhl, 2012, Energy reduction in wood fuel pellet production Ståhl, 2011, Energy efficiency pilot-scale production of wood fuel pellets made from a raw material mix including sawdust and rapeseed cake, Biomass Bioenergy, 35, 4849, 10.1016/j.biombioe.2011.10.003 Ståhl, 2014, Sustainable improvements in the wood fuel pellet chain Ståhl, 2016, Improvement of wood fuel pellet quality using sustainable sugar additives, BioResources, 11, 3373, 10.15376/biores.11.2.3373-3383 European Pellet Council, 2013 Pantaleo, 2020, Techno-economic modeling of biomass Pellet routes: feasibility in Italy, Energies, 13, 1, 10.3390/en13071636 Tarasov, 2013, Effect of additives on wood pellet physical and thermal characteristics: a review, ISRN Forestry, 1–6 Tumuluru, 2011, A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application, Biofuel Bioprod. Bior., 5, 683, 10.1002/bbb.324 Ståhl, 2017, Research experience from the use of different additives in wood-fuel pellet production, Int. J. Energy Prod. Managt., 2, 288 Restolho, 2009, Sugars and lignosulphonates recovery from eucalyptus spent sulphite liquor by membrane processes, Biomass Bioenergy, 33, 1558, 10.1016/j.biombioe.2009.07.022 Saeed, 2011, Chitosan as a flocculant for pre–hydrolysis liquor of Kraft-based dissolving pulp production process, Carbohydr Polym, 86, 1630, 10.1016/j.carbpol.2011.06.075 Aro, 2017, Production and application of lignosulfonates and sulfonated lignin, Chem Sus Chem, 10, 1861, 10.1002/cssc.201700082 Gierer, 1980, Chemical aspects of kraft pulping, Wood Sci Technol, 14, 241, 10.1007/BF00383453 Zhu, 2014, Investigation and characterization of lignin precipitation in the lignoboost process, J Wood Chem Technol, 34, 77, 10.1080/02773813.2013.838267 Giummarella, 2016, Lignin prepared by ultrafiltration of black liquor: investigation of solubility, viscosity and ash content, BioResources, 11, 3494, 10.15376/biores.11.2.3494-3510 Nielsen, 2009, 188 Vishtal, 2011, Challenges in industrial applications of technical lignins, BioResources, 6, 3547, 10.15376/biores.6.3.3547-3568 Oveissi, 2016, PDADMAC as a flocculant for lignosulfonate of NSSC pulping process, Biotechnol Prog, 32, 686, 10.1002/btpr.2251 Meister, 2002, J. Modification of lignin. J. Macromol. Sci. Polym. Rev., 42, 235, 10.1081/MC-120004764 Li, 2001, Relationships between thermal, rheological characteristics and swelling power for various starches, J Food Eng, 50, 141, 10.1016/S0260-8774(00)00236-3 Singh, 2003, Morphological, thermal and rheological properties of starches from different botanical sources, Food Chem, 81, 219, 10.1016/S0308-8146(02)00416-8 Chaplin Mišljenović, 2014, The effect of waste vegetable oil addition on pelletability and physical quality of wood pellets, Ann. T. Nord. Rheol. Soc., 22, 1 Kulkarni, 2006, Waste cooking oil: an economical source for biodiesel: A review, Ind Eng Chem Res, 45, 2901, 10.1021/ie0510526 Toop, 2014, 1 Demirbas, 2009, Biodiesel from waste cooking oil via base-catalytic and supercritical methanol transesterification, Energy Convers Manag, 50, 923, 10.1016/j.enconman.2008.12.023 Naidu, 1998, Production of pectinolytic enzymes–a review, Bioprocess Eng, 19, 355, 10.1007/PL00009023 Mamma, 2008, Fungal multienzyme production on industrial by-products of citrus-processing industry, Bioresour Technol, 99, 2373, 10.1016/j.biortech.2007.05.018 Carroll, 2015, The use of additives and fuel blending to reduce emissions from the combustion of agricultural fuels in small scale boilers, Biosyst Eng, 129, 127, 10.1016/j.biosystemseng.2014.10.001 Persson, 2013, Emissions and deposit properties from combustion of wood pellet with magnesium additives, J Fuel Chem Technol, 41, 530, 10.1016/S1872-5813(13)60029-8 Bernhardt, 2012, Investigation of the combustion behavior of pulp pellets in a domestic pellet boiler Fournel, 2015, Effect of additives and fuel blending on emissions and ash-related problems from small-scale combustion of reed canary grass, Agriculture, 5, 561, 10.3390/agriculture5030561 Wang, 2014, Investigation of biomass ash sintering characteristics and the effect of additives, Energy Fuels, 28, 208, 10.1021/ef401521c Sommersacher, 2013, Application of novel and advanced fuel characterization tools for the combustion related characterization of different wood/kaolin and straw/kaolin mixtures, Energy Fuels, 27, 5192, 10.1021/ef400400n Kuokkanen, 2011, Additives in wood pellet production – a pilot-scale study of binding agent usage, BioResources, 6, 4331, 10.15376/biores.6.4.4331-4355 Mittal, 1977, The role of the interface in adhesion phenomena, Polym Eng Sci, 17, 467, 10.1002/pen.760170709