A review of selected non-destructive methods for residual stress measurement

Cullity, 1977, Some problems in X-ray stress measurements, 20, 259 Ruud, 1981, A review and evaluation of nondestructive methods for residual stress measurement Gianuzzi, 1975, Studies on AISI type 304 stainless steel piping weldments for use in BWR application Mathar, J. ‘Determination of initial stresses by measuring the deformation around drilled holes’ Archiv für das Eisenhuttenwesen6 pp 277–281 Mathar, 1934, Trans ASME, 56, 249 Wolf, 1974, New experimental technique to determine residual stresses in large turbine-generator components, 1 Wolf, 1971, Origin, measurement and assessment of residual stresses in large forging for turbines and generators, Archiv für das Eisenhuttenwesen, 42, 411 Bush, 1979, Residual stresses in a shaft after weld repair and subsequent stress relief, 1 Wolf, 1977, Investigations of residual stresses in the turbine and generator industry, Archiv für das Eisenhuttenwesen, 48, 173, 10.1002/srin.197705292 Kelsey, 1956, Measuring non-uniform residual stresses by the hole drilling method, 14, 181 Bush, 1973, Simplification of the hole-drilling method of residual stress measurement, ISA Transactions, 12, 249 Rendler, 1966, Hole-drilling strain-gauge method of measuring residual stress, Experimental Mechanics, 6, 577, 10.1007/BF02326825 Dini, 1976, Residual stresses in thick electrodeposits of a nickel-cobalt alloy, Experimental Mechanics, 56, 10.1007/BF02328604 Ruud, 1979, X-ray analysis and advances in portable field instrumentation, J Metals, 31, 10 Cullity, 1978 SAE, 1971 Maeder, 1981, Present possibilities for the X-ray diffraction method of stress measurement, NDT Int, 14, 235, 10.1016/0308-9126(81)90076-6 Barrett, 1966 Ruud, 1979, Residual stress measurement by X-rays: errors, limitations, and applications, 101 James, 1978, PARS — a portable X-ray analyzer for residual stresses, J Testing and Eval, JTEV A, 6, 91, 10.1520/JTE10925J Pangborn, 1981, Dislocation distribution and prediction of fatigue damage, Met Trans, 12A, 109, 10.1007/BF02648515 Ruud, 1978, Feasibility of determining stress in BWR pipes with the DRI (Ruud-Barrett) X-ray stress analyzer Green, 1973, Ultrasonic investigation of mechanical properties Crecraft, 1968, Ultrasonic measurement of stresses, Ultrasonics, 117, 10.1016/0041-624X(68)90205-9 Bradfield, 1953, Phil Maj, 44, 295 Pursey, 1954, Phil. Maj, 45, 295, 10.1080/14786440308520452 McGonagle, 1967, Measurement of surface-residual stress by nondestructive methods, 159 Boland, 1980, Development of ultrasonic tomography for residual stress mapping James, 1980, Quantitative nondestructive measurement of residual stresses, CRC Critical Rev in Solid State Sci, 61, 10.1080/10408438008243570 Papadakis, 1964, Ultrasonic attenuation and velocity in three transformation products of steel, J Appl Phys, 35, 1276, 10.1063/1.1713652 Moro, 1980, Measurement of ultrasonic wave velocity of steel for various structures and degrees of cold-working, NDT Int, 13, 169, 10.1016/0308-9126(80)90072-3 Tittman, 1973, Measurement of physical property gradients with elastic surface wave dispersion, 20 Salama, 1980, The effect of stress on the temperature dependence of ultrasound velocity, J Appl Phys, 51, 1505, 10.1063/1.327800 Salama, 1967, Third-order elastic constants of copper at low temperature, Phys Rev, 161, 673, 10.1103/PhysRev.161.673 Gardner, 1975, Barkhausen noise analysis, 211 Chait, 1975, Residual stress pattern in a high hardness laminar composite steel weldment, 237 Sundström, 1979, The use of barkhausen noise analysis in nondestructive testing, Mater Eval, 51 Barton, 1979, Advanced quantitative magnetic nondestructive evaluation methods, theory and experiment, 461 Ono, 1980, Determination of residual stress by magneochemical acoustic emission, ONR Tech Report No 80-01 Shibata, 1981, Magnetomechanical acoustic emission — a new method for nondestructive stress measurement, NDT Int, 14, 227, 10.1016/0308-9126(81)90075-4 King, 1978, Residual stress measurement in structural steels, Final Report SWRI Proj 15-4660