A review of recent developments of friction modifiers for liquid lubricants (2007–present)
Tóm tắt
Từ khóa
Tài liệu tham khảo
Fujitsu T, Griffiths J. Lubricating oil composition. US 2006/0189489 A1; 2006.
Feng, 2007, Anti-wear performance of organomolybdenum compounds as lubricant additives, Lubr Sci, 19, 81, 10.1002/ls.31
Bakunin, 2004, Synthesis and application of inorganic nanoparticles as lubricant components–a review, J Nanopart Res, 6, 273, 10.1023/B:NANO.0000034720.79452.e3
Braithwaite, 1978, A critical analysis of the performance of molybdenum compounds in motor vehicles, Wear, 46, 405, 10.1016/0043-1648(78)90044-3
Mitchell, 1984, Oil-soluble Mo–S compounds as lubricant additives, Wear, 100, 281, 10.1016/0043-1648(84)90017-6
Topolovec Miklozic, 2001, Chemical and physical analysis of reaction films formed by molybdenum dialkyl-dithiocarbamate friction modifier additive using Raman and atomic force microscopy, Tribol Lett, 11, 71, 10.1023/A:1016655316322
Grossiord, 1998, MoS2 single sheet lubrication by molybdenum dithiocarbamate, Tribol Int, 31, 737, 10.1016/S0301-679X(98)00094-2
de Barros’ Bouchet, 2005, Boundary lubrication mechanisms of carbon coatings by MoDTC and ZDDP additives, Tribol Int, 38, 257, 10.1016/j.triboint.2004.08.009
De Barros, 2003, Friction reduction by metal sulfides in boundary lubrication studied by XPS and XANES analyses, Wear, 254, 863, 10.1016/S0043-1648(03)00237-0
Morina, 2006, ZDDP and MoDTC interactions in boundary lubrication–the effect of temperature and ZDDP/MoDTC ratio, Tribol Int, 39, 1545, 10.1016/j.triboint.2006.03.001
Neville, 2007, Compatibility between tribological surfaces and lubricant additives-how friction and wear reduction can be controlled by surface/lube synergies, Tribol Int, 40, 1680, 10.1016/j.triboint.2007.01.019
Yu, 2000, Tribological behavior and structural change of the LB film of MoS2 nanoparticles coated with dialkyldithiophosphate, Surf Coat Technol, 130, 110, 10.1016/S0257-8972(00)00691-5
Cizaire, 2002, Mechanisms of ultra-low friction by hollow inorganic fullerene-like MoS2 nanoparticles, Surf Coat Technol, 160, 282, 10.1016/S0257-8972(02)00420-6
Fish, 2002, The effect of friction modifier additives on CVJ grease performance, NLGI Spokesman, 66, 22
Winer, 1967, Molybdenum disulfide as a lubricant: a review of the fundamental knowledge, Wear, 10, 422, 10.1016/0043-1648(67)90187-1
Farr, 1975, Molybdenum disulphide in lubrication. A review, Wear, 35, 1, 10.1016/0043-1648(75)90137-4
Fuks, 1975, Lubricating oils with ultrafine molybdenum disulfide or graphite as an additive (review), Chem Technol Fuels Oils, 11, 652, 10.1007/BF00717299
Tenne, 1998, Nanoparticles of layered compounds with hollow cage structures (inorganic fullerene-like structures), Chem Mater, 10, 3225, 10.1021/cm9802189
Chhowalla, 2000, Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear, Nature, 407, 164, 10.1038/35025020
Zhou, 2007, Lubricating properties of Cyanex 302-modified MoS2 microspheres in base oil 500SN, Lubr Sci, 19, 71, 10.1002/ls.32
Bokarev, 2007, Highly effective friction modifiers from nano-sized materials, Chem Technol Fuels Oils, 43, 305, 10.1007/s10553-007-0054-2
Bec, 2004, Synergistic effects of MoDTC and ZDTP on frictional behaviour of tribofilms at the nanometer scale, Tribol Lett, 17, 797, 10.1007/s11249-004-8088-7
Morina, 2006, ZDDP and MoDTC interactions and their effect on tribological performance-tribofilm characteristics and its evolution, Tribol Lett, 24, 243, 10.1007/s11249-006-9123-7
Lainé, 2009, The effect of a friction modifier additive on micropitting, Tribol Trans, 52, 526, 10.1080/10402000902745507
Chase KJ, Tepper RJ. Process for producing highly sulfurized molybdenum oxysulfide dithiocarbamates. US 7524799; 2009.
Ge, 2013, Synergistic effects of MoDTC and overbased calcium sulfonate additive, Adv Mater Res, 651, 73, 10.4028/www.scientific.net/AMR.651.73
Migdal CA, Stott PE, Ustynyuuk NA, Zaroubine DN, Yampolsky IV, Rufanov KA. Organo-imido molybdenum complexes as friction modifier additives for lubricant compositions. US 7229951; 2007.
Nagatomi E, Shinoda N, Aihara Y. Organic molybdenum compounds and oil compositions containing the same. US 2010/0144568 A1; 2010.
Nagatomi E, Shinoda N, Aihara Y. Organic molybdenum compounds and oil compositions containing the same. US 8188017; 2012.
Nagatomi E, Shinoda N, Aihara Y. Organic molybdenum compounds and lubricating compositions which contain said compounds. US 2011/0312863 A1; 2011.
Vengudusamy, 2012, Behaviour of MoDTC in DLC/DLC and DLC/steel contacts, Tribol Int, 54, 68, 10.1016/j.triboint.2012.04.028
Topolovec-Miklozic, 2008, Behaviour of boundary lubricating additives on DLC coatings, Wear, 265, 1893, 10.1016/j.wear.2008.04.051
Haque, 2008, Tribochemical interactions of friction modifier and antiwear additives with CrN coating under boundary lubrication conditions, J Tribol, 130, 042302, 10.1115/1.2961808
Haque, 2009, Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions, Wear, 266, 147, 10.1016/j.wear.2008.06.011
Haque, 2010, Influence of friction modifier and antiwear additives on the tribological performance of a non-hydrogenated DLC coating, Surf Coat Technol, 204, 4001, 10.1016/j.surfcoat.2010.05.017
Haque, 2010, Effect of friction modifiers and antiwear additives on the tribological performance of a hydrogenated DLC coating, J Tribol, 132, 032101, 10.1115/1.4001650
Hu, 2008, Tribological behaviors and mechanism of sulfur- and phosphorus-free organic molybdate ester with zinc dialkyldithiophosphate, Tribol Int, 41, 549, 10.1016/j.triboint.2007.11.020
Yan, 2012, Comparing tribological behaviors of sulfur- and phosphorus-free organomolybdenum additive with ZDDP and MoDTC, Tribol Int, 53, 150, 10.1016/j.triboint.2012.04.002
Korcek, 2000, Automotive lubricants for the next millennium, Ind Lubr Tribol, 52, 209, 10.1108/00368790010373175
Erdemir, 2005, Review of engineered tribological interfaces for improved boundary lubrication, Tribol Int, 38, 249, 10.1016/j.triboint.2004.08.008
Bartz, 2006, Ecotribology: environmentally acceptable tribological practices, Tribol Int, 39, 728, 10.1016/j.triboint.2005.07.002
Maejima, 2000, Friction behaviour of anodic oxide film on aluminum impregnated with molybdenum sulfide compounds, Surf Coat Technol, 132, 105, 10.1016/S0257-8972(00)00849-5
Chiñas-Castillo, 2008, MoS2 films formed by in-contact decomposition of water-soluble tetraalkylammonium thiomolybdates, Tribol Lett, 29, 155, 10.1007/s11249-007-9292-z
Lara-Romero, 2008, Friction and wear performance of tetraalkylammonium thiomolybdates in aqueous solutions, Tribol Trans, 51, 526, 10.1080/10402000802071293
Wells, 1920, The theory and practice of lubrication: the “germ” process, J Soc Chem Ind, 39, 51T
Langmuir, 1920, The mechanism of the surface phenomena of flotation, Trans Faraday Soc, 15, 62, 10.1039/tf9201500062
Levine, 1957, Physical properties of monolayers adsorbed at the solid–air interface. I. Friction and wettability of aliphatic polar compounds and effect of halogenation, J Phys Chem, 61, 1068, 10.1021/j150554a008
Beltzer, 1988, Effect of additive molecular structure on friction, Lubr Sci, 1, 3, 10.1002/ls.3010010103
Jahanmir, 1985, Chain length effects in boundary lubrication, Wear, 102, 331, 10.1016/0043-1648(85)90176-0
Jahanmir, 1986, Effect of additive molecular structure on friction coefficient and adsorption, J Tribol, 108, 109, 10.1115/1.3261129
Minami, 2008, Investigation of tribo-chemistry by means of stable isotopic tracers: mechanism for durability of monomolecular boundary film, Tribol Int, 41, 1056, 10.1016/j.triboint.2008.01.011
Deryaguin, 1958, The mechanism of boundary lubrication and the properties of the lubricating film: short- and long-range action in the theory of boundary lubrication, Wear, 1, 277, 10.1016/0043-1648(58)90001-2
Allen, 1969, Boundary layer lubrication: monolayer or multilayer, Wear, 14, 363, 10.1016/0043-1648(69)90017-9
Smith, 1972, Rigid surface films, Proc R Soc Lond A, Math Phys Sci, 328, 541, 10.1098/rspa.1972.0094
Anghel, 1999, Thick-boundary-film formation by friction modifier additives, Lubr Sci, 11, 313, 10.1002/ls.3010110402
Hersey, 1933, Logic of oiliness, Mech Eng, 15, 561
Hersey, 1938
Choo, 2007, Influence of organic friction modifier on liquid slip: a new mechanism of organic friction modifier action, Tribol Lett, 27, 239, 10.1007/s11249-007-9231-z
Bisht, 2002, Eco-friendly base fluids for lubricant oil formulations, J Synth Lubr, 19, 243, 10.1002/jsl.3000190306
Minami, 2007, Concept of molecular design towards additive technology for advanced lubricants, Lubr Sci, 19, 127, 10.1002/ls.37
Nibert RK, Bloch RA, Devine M, Tandon M, Watts RF. Power transmitting fluids with improved anti-shudder durability. EP 0877784 B2; 2007.
Henly TJ, Tersigni SH. Power transmission fluid with enhanced friction characteristics. US 2007/0293406 A1; 2007.
Pollock CM, Nelson LA. Fatty acid esters and uses thereof. US 7256162; 2007.
Aradi AA, Malfer DJ, Schwab SD, Colucci WJ. Additives for fuel compositions to reduce formation of combustion chamber deposits. US 7402185; 2008.
Aradi AA, Malfer DJ, Schwab SD, Colucci WJ. Friction modifier alkoxyamine salts of carboxylic acids as additives for fuel compositions and methods of use thereof. US 7435272; 2008.
Saathoff LD, Tersigni SH, Yatsunami K. Compositions and methods for improved friction durability in power transmission fluids. US 2008/0090744 A1; 2008.
Kasai M. Lubricant composition. US 2008/0096775 A1; 2008.
Volkel L, Lange A, Lockemann C, Posselt D. Hydrocarbyl succinic acid and hydrocarbylsuccinic acid derivatives as friction modifiers. US 2009/0235576 A1; 2009.
Devlin MT, Ryan HT, Hudson KA. Friction modifiers for slideway applications. US 2009/0318319 A1; 2009.
Deblase FJ, Migdal CA, Mulqueen G, Madabusi VK. Fatty sorbitan ester based friction modifiers. US 2010/0210487 A1; 2010.
De Blase FJ, Migdal CA, Mulqueen G, Madabusi V. Fatty sorbitan ester based friction modifiers. WO 2010/093519 A1; 2010.
Vilardo JS, Mosier PE. Carboxylic acid derivatives as friction modifiers in fuels. US 2011/0162263 A1; 2011.
Sharma, 2007, Oxidation, friction reducing, and low temperature properties of epoxy fatty acid methyl esters, Green Chem, 9, 469, 10.1039/b614100e
Kurth, 2007, Adsorption behavior of epoxidized fatty esters via boundary lubrication coefficient of friction measurements, Chem Eng Commun, 194, 1065, 10.1080/00986440701293173
Ikeda M, Hurley S, Abraham WD, Sumiejski JL, Tipton CD. Functional fluid. US 2010/0144565 A1; 2010.
Minami, 2007, Investigation of tribo-chemistry by means of stable isotopic tracers, part 2: lubrication mechanism of friction modifiers on diamond-like carbon, Tribol Trans, 50, 477, 10.1080/10402000701613302
Sharma, 2008, Ester hydroxy derivatives of methyl oleate: tribological, oxidation and low temperature properties, Bioresour Technol, 99, 7333, 10.1016/j.biortech.2007.12.057
Katafuchi, 2007, Evaluation of the antiwear and friction reduction characteristics of mercaptocarboxylate derivatives as novel phosphorous-free additives, Tribol Int, 40, 1017, 10.1016/j.triboint.2006.09.005
He, 2005, A study of the synergistic effect of a triazine-dithiocarbamate derivative with tcp in vegetable oil, J Synth Lubr, 21, 287, 10.1002/jsl.3000210403
Li, 2011, The tribological chemistry of novel triazine derivatives as additives in synthetic diester, Tribol Trans, 54, 793, 10.1080/10402004.2011.604760
Li, 2012, Tribological study of xanthate-containing acetic ester as additives in hydrogenated oil, Appl Mech Mater, 236, 123
Minami, 2008, Aspartic acid-derived wear-preventing and friction-reducing agents for ionic liquids, Chem Lett, 37, 300, 10.1246/cl.2008.300
Minami, 2008, Improvement in the tribological properties of imidazolium-derived ionic liquids by additive technology, J Synth Lubr, 25, 45, 10.1002/jsl.49
Reddyhoff, 2011, Friction modifier behaviour in lubricated MEMS devices, Tribol Lett, 41, 239, 10.1007/s11249-010-9704-3
Tagliamonte TA, Tipton CD, Ward WCJ. Method for lubricating a dual clutch transmission. EP 1499701 B1; 2009.
Ikeda M, Hurley S, Abraham W, Sumiejski JL, Tipton CD. Functional fluid. US 2010/0144565 A1; 2010.
Suen YF, Lackie ML, Parsinejad F. Aminomethyl-substituted imidazole compounds for use as friction modifiers in lubricating oil compositions. US 2011/0136710 A1; 2011.
Suen YF, Lackie ML, Parsinejad F. Aminomethyl-substituted imidazole compounds for use as friction modifiers in lubricating oil compositions. US 8268761; 2012.
Suen YF. Lubricating composition containing friction modifier blend. WO 2012/071185 A2; 2012.
Vilardo JS. Fuel additives for use in high level alcohol–gasoline blends. WO 2008/082916 A1; 2008.
Vilardo JS. Fuel additives for use in high level alcohol–gasoline blends. US 2009/0307965 A1; 2009.
Vilardo JS. Fuel additives for use in alcohol-fuels. US 2010/0107484 A1; 2010.
Dowding PJ, Adams CJ. Lubricating oil composition. US 2009/0093385 A1; 2009.
Dowding PJ, Adams CJ. Overbased metal sulphonate detergent. US 2009/0093386 A1; 2009.
Kaufman BJ, Ketcham JR, Acker WP. Fuel additives and fuel compositions and methods for making and using the same. US 2010/0132253 A1; 2010.
Zhao, 2012, Improved anti-shudder performance of ATFs–influence of a new friction modifier and surface chemistry, Tribol Int, 46, 62, 10.1016/j.triboint.2011.06.012
Lantuejoul K, McLeod KL, Vartanian PF. Lubricating compositions for wet-brakes. EP 1367116 B1; 2011.
Ikeda M, Hurley S, Abraham WD, Sumiejski JL, Tipton CD. Functional fluid. WO 2008/076825 A1; 2008.
Hurley S, Sumiejski JL. Additive concentrate and a method of lubricating transmissions. US 2012/0178661 A1; 2012.
Mullay JJ, Burrington JD, Delbridge EE. Stabilized blends containing friction modifiers. US 2012/0283158 A1; 2012.
Colucci W, Fricke K. Methods to improve the low temperature compatibility of amide friction modifiers in fuels and amide friction modifiers. US 2007/0094921 A1; 2007.
Colucci W, Fricke K. Methods to improve the low temperature compatibility of amide friction modifiers in fuels and amide friction modifiers. US 7846224; 2010.
Völkel L, Lange A, Lockemann C, Posselt D, Joseph JT. Hydroxyalkyl-substituted aminoalkylamides of fatty acids as friction modifying agents. WO 2007/039488 A1; 2007.
Matsui S, Tagawa K. Lubricating oil composition. US 2008/0248981 A1; 2008.
Matsui S, Tagawa K. Lubricating oil composition. US 7867957; 2011.
Toman JJ, Bhalla G, Yamaguchi ES, Suen YF, Miller T, Simard F. Method for improving fuel economy of a heavy duty diesel engine. US 2012/0247412 A1; 2012.
Saccomando DJ, Vickerman RJ, Patterson SM. Amine derivatives as friction modifiers in lubricants. US 2012/0015855 A1; 2012.
Vickerman RJ, Saccomando DJ. Oxalic acid bis-amides or amide–ester as friction modifiers in lubricants. US 2012/0021958 A1; 2012.
Papay AG, O’Brien JP. Oil-soluble friction-reducing additive, process for the preparation thereof, and lubricating oil or fuel composition containing the additive. EP 0020037 B1; 1984.
Itou M, Murakami Y, Arakawa Y, Maeda M, Sugiyama T. Lubricant composition for automatic transmission. US 2007/0270320 A1; 2007.
Sheets R, Ozbalik N. Pyrrolidine-2,5-dione derivatives for use in friction modification. US 2010/0137173 A1; 2010.
Saccomando DJ, Vickerman RJ. Imides and bis-amides as friction modifiers in lubricants. WO 2010/132318 A1; 2010.
Nibert RK, Watts RF, Bloch RA. Automatic transmission with an automatic transmission fluid of improved friction durability. EP 0856042 B9; 2011.
Saccomando DJ, Vickerman RJ. Imides and bis-imides as friction modifiers in lubricants. US 2012/0122744 A1; 2012.
Nibert RK, Tandon M, Watts RF. Power transmitting fluids with improved anti-shudder durability. EP 0956330 B1; 2011.
Shrestha KS, Shiga M, Fuchi M, Nakagawa T. Friction modifier and transmission oil. US 2011/0028364 A1; 2011.
Konishi S, Kano M, Yasuda Y, Mabuchi Y, Hamada T, Takeshima S, et al. Low-friction sliding mechanism. US 2011/0028361 A1; 2011.
Watts RF, Noles JRJR, Gorda KR, Cogen KL. Boron-containing lubricating oils having improved friction stability. US 2009/0005276 A1; 2009.
Watts RF, Noles JRJR, Gorda KR, Cogen KL. Lubricating oils having improved friction stability. US 2009/0005277 A1; 2009.
Saccomando DJ, Vickerman RJ, Bartley SL, Kocsis JA. Aromatic imides and esters as lubricant additives. WO 2012/154708 A1; 2012.
Adams, 1977, Borate–a new generation EP gear lubricant, Lubr Eng, 33, 241
Papay AG, O’brien JP. Lubricating oil composition containing boronated N-hydroxymethyl succinimide friction reducers. US 4295983; 1981.
Horodysky AG, Ashjian H, Gawel HA. Borated friction reducing additives and compositions thereof. US 4522734; 1985.
Stanulov, 1998, An opportunity for partial replacement of phosphates and dithiophosphates in EP packages with boron-containing additives, Tribol Int, 31, 257, 10.1016/S0301-679X(98)00028-0
Zhang, 1999, The tribological properties of the heterocyclic compound containing S, N, O, and B as additive in liquid paraffin, Wear, 224, 68, 10.1016/S0043-1648(98)00330-5
Erdemir, 2008, Boron-based solid nanolubricants and lubrication additives, 203
Shah, 2013, Boron in tribology: from borates to ionic liquids, Tribol Lett, 51, 281, 10.1007/s11249-013-0181-3
Lovell, 2010, Influence of boric acid additive size on green lubricant performance, Philos Trans R Soc A, 368, 4851, 10.1098/rsta.2010.0183
Philippon, 2011, Experimental simulation of tribochemical reactions between borates esters and steel surface, Tribol Lett, 41, 73, 10.1007/s11249-010-9685-2
Levine JA, Wu S. Borate ester lubricant additives. US 7291581; 2007.
Cardis AB, Farng LO, Horodysky AG, Okorodudu AOM. Borated dihydrocarbyl dithiocarbamate lubricant additives and composition thereof. US 5370806; 1994.
Shah, 2012, Novel alkylborate-dithiocarbamate lubricant additives: synthesis and tribophysical characterization, Tribol Lett, 45, 67, 10.1007/s11249-011-9855-x
Sun, 2009, Tribological properties and action mechanism of N,N-dialkyl dithiocarbamate-derived S-hydroxyethyl borate esters as additives in rapeseed oil, Wear, 266, 917, 10.1016/j.wear.2008.12.004
Huang, 2004, A study of S-[2-(acetamido) benzothiazol-1-yl]N,N-dibutyl dithiocarbamate as an oil additive in liquid paraffin, Tribol Int, 37, 71, 10.1016/j.triboint.2003.07.001
Li, 2010, Tribological studies on a novel borate ester containing benzothiazol-2-yl and disulfide groups as multifunctional additive, Tribol Int, 43, 1048, 10.1016/j.triboint.2009.12.030
Wang, 2008, Tribological study of a novel borate ester containing S, P with high hydrolytic stability as a multifunctional lubricating additive, Tribol Trans, 51, 160, 10.1080/10402000701691738
Wang, 2009, Tribological study of a novel borate ester containing dialkylthiophosphate group as multifunctional additive, Ind Lubr Tribol, 61, 33, 10.1108/00368790910929511
Shah, 2009, Synthesis, physicochemical, and tribological characterization of S-di-n-octoxyboron-O,O′-di-n-octyldithiophosphate, ACS Appl Mater Interfaces, 1, 2835, 10.1021/am900572y
Shah, 2011, Interfacial antiwear and physicochemical properties of alkylborate-dithiophosphates, ACS Appl Mater Interfaces, 3, 956, 10.1021/am101203t
Hewette C. Gear fluids. US 2007/0225182 A1; 2007.
Hewette C, Degonia DJ, Phillips RL, Sheets RM. Compositions comprising at least one friction modifying compound, and methods of use thereof. US 2008/0280794 A1; 2008.
Burrington JD, Delbridge EE, Ivancic DN. Stabilized blends containing friction modifiers. WO 2012/162027 A1; 2012.
Li, 2011, A study of P–N compound as multifunctional lubricant additive, Lubr Sci, 23, 363, 10.1002/ls.162
Hagiwara, 2000, Room temperature ionic liquids of alkylimidazolium cations and fluoroanions, J Fluorine Chem, 105, 221, 10.1016/S0022-1139(99)00267-5
Ye, 2001, Room-temperature ionic liquids: a novel versatile lubricant, Chem Commun, 2244, 10.1039/b106935g
Zhou, 2009, Ionic liquid lubricants: designed chemistry for engineering applications, Chem Soc Rev, 38, 2590, 10.1039/b817899m
Bermúdez, 2009, Ionic liquids as advanced lubricant fluids, Molecules, 14, 2888, 10.3390/molecules14082888
Torimoto, 2010, New frontiers in materials science opened by ionic liquids, Adv Mater, 22, 1196, 10.1002/adma.200902184
Battez, 2009, Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts, Wear, 266, 1224, 10.1016/j.wear.2009.03.043
Cai, 2010, Alkyl imidazolium ionic liquids as friction reduction and anti-wear additive in polyurea grease for steel/steel contacts, Tribol Lett, 40, 215, 10.1007/s11249-010-9624-2
Jiménez, 2008, Imidazolium ionic liquids as additives of the synthetic ester propylene glycol dioleate in aluminium–steel lubrication, Wear, 265, 787, 10.1016/j.wear.2008.01.009
Jiménez, 2012, Short alkyl chain imidazolium ionic liquid additives in lubrication of three aluminium alloys with synthetic ester oil, Tribol Mater Surf Interfaces, 6, 109, 10.1179/1751584X12Y.0000000011
Xiao, 2011, Film thickness of ionic liquids under high contact pressures as a function of alkyl chain length, Tribol Lett, 41, 471, 10.1007/s11249-010-9729-7
Palacio, 2010, A review of ionic liquids for green molecular lubrication in nanotechnology, Tribol Lett, 40, 247, 10.1007/s11249-010-9671-8
Cai, 2010, Imidazolium ionic liquids as antiwear and antioxidant additive in poly(ethylene glycol) for steel/steel contacts, ACS Appl Mater Interfaces, 2, 870, 10.1021/am900847j
Liu, 2006, Benzotriazole as the additive for ionic liquid lubricant: one pathway towards actual application of ionic liquids, Tribol Lett, 23, 191, 10.1007/s11249-006-9050-7
Cai, 2011, Tribological properties of novel imidazolium ionic liquids bearing benzotriazole group as the antiwear/anticorrosion additive in poly(ethylene glycol) and polyurea grease for steel/steel contacts, ACS Appl Mater Interfaces, 3, 4580, 10.1021/am200826b
Cai, 2012, Anticorrosion imidazolium ionic liquids as the additive in poly(ethylene glycol) for steel/Cu–Sn alloy contacts, Faraday Discuss, 156, 147, 10.1039/c2fd00124a
Cai, 2013, A novel imidazolium salt with antioxidation and anticorrosion dual functionalities as the additive in poly(ethylene glycol) for steel/steel contacts, Wear, 306, 197, 10.1016/j.wear.2012.09.001
Yao, 2009, Bisimidazolium ionic liquids as the high-performance antiwear additives in poly(ethylene glycol) for steel–steel contacts, ACS Appl Mater Interfaces, 1, 467, 10.1021/am800132z
Pei, 2008, Polyelectrolyte-grafted carbon nanotubes: synthesis, reversible phase-transition behavior, and tribological properties as lubricant additives, J Polym Sci Polym Chem, 46, 7225, 10.1002/pola.23029
Phillips, 2004, Ionic liquid lubrication effects on ceramics in a water environment, Tribol Lett, 17, 533, 10.1023/B:TRIL.0000044501.64351.68
Jimenez, 2007, Ionic liquids as lubricants for steel–aluminum contacts at low and elevated temperatures, Tribol Lett, 26, 53, 10.1007/s11249-006-9182-9
Mazyar, 2009, Frictional dynamics of alkylsilane monolayers on SiO2: effect of 1-n-butyl-3-methylimidazolium nitrate as a lubricant, Langmuir, 25, 5103, 10.1021/la804106f
Swatloski, 2003, Ionic liquids are not always green: hydrolysis of 1-buty-3-methylimidazolium hexafluorophosphate, Green Chem, 5, 361, 10.1039/b304400a
Jastorff, 2003, How hazardous are ionic liquids? Structure–activity relationships and biological testing as important elements for sustainability evaluation, Green Chem, 5, 136, 10.1039/b211971d
Yang, 2011, Low-temperature heat capacities of 1-alkyl-3-methylimidazolium bis(oxalato)borate ionic liquids and the influence of anion structural characteristics on thermodynamic properties, Phys Chem Chem Phys, 13, 199, 10.1039/C0CP01744B
Shah, 2011, Novel halogen-free chelated orthoborate-phosphonium ionic liquids: synthesis and tribophysical properties, Phys Chem Chem Phys, 13, 12865, 10.1039/c1cp21139k
Antzutkin ON, Shah FU, Glavatskikh S. Ionic-liquid-based lubricants and lubrication additives comprising ions. WO 2012/128714 A1; 2012.
Qu, 2012, Antiwear performance and mechanism of an oil-miscible ionic liquid as a lubricant additive, ACS Appl Mater Interfaces, 4, 997, 10.1021/am201646k
Yu, 2012, Oil-miscible and non-corrosive phosphonium-based ionic liquids as candidate lubricant additives, Wear, 289, 58, 10.1016/j.wear.2012.04.015
Zhao, 2013, Tribological behaviour of protic ionic liquids with ammonium salts modified LABSA as lubricants and additives, Lubr Sci, 25, 217, 10.1002/ls.1204
Pejaković, 2012, Pyrrolidinium sulfate and ammonium sulfate ionic liquids as lubricant additives for steel/steel contact lubrication, Proc Inst Mech Eng J–J Eng Tribol, 226, 923, 10.1177/1350650112448978
Müller, 2006, The design of boundary film-forming PMA viscosity modifiers, Tribol Trans, 49, 225, 10.1080/05698190600614833
Müller, 2007, Design of functionalized PAMA viscosity modifiers to reduce friction and wear in lubricating oils, J ASTM Int, 4, 116, 10.1520/JAI100956
Fan, 2007, Reduction of friction by functionalised viscosity index improvers, Tribol Lett, 28, 287, 10.1007/s11249-007-9272-3
Tohyama, 2009, Friction reducing effect of multiply adsorptive organic polymer, Tribol Int, 42, 926, 10.1016/j.triboint.2008.12.012
Yuki T, Nishida M. Friction regulator for lubricating oil and lubricating oil composition. US 7579305; 2009.
Yuki T, Nishida M. Friction modifier composition. EP 1489158 B1; 2012.
Aoki, 2013, Verification of the advantages in friction-reducing performance of organic polymers having multiple adsorption sites, Tribol Int, 59, 57, 10.1016/j.triboint.2012.06.001
Stoehr T, Mueller M, Eisenberg B, Becker H, Mueller A. Oil soluble polymers. WO 2007/025837 A1; 2007.
Stoehr T, Mueller M, Eisenberg B, Becker H, Mueller A. Oil soluble polymers. US 8163682; 2012.
Zheng, 2009, Friction reduction of lubricant base oil by micelles and crosslinked micelles of block copolymers, Tribol Trans, 53, 97, 10.1080/10402000903226390
Lee, 2008, Poly(l-lysine)-graft-poly(ethylene glycol): a versatile aqueous lubricant additive for tribosystems involving thermoplastics, Lubr Sci, 20, 21, 10.1002/ls.50
Nelson KD. Esterified copolymers of polyalkenes/unsaturated acidic reagents useful as lubricant and fuel additives. EP 1491561 B1; 2008.
Nelson KD. Esterified copolymers of polyalkenes/unsaturated acidic reagents useful as lubricant and fuel additives. US 2008/0009427 A1; 2008.
Gandon C, Sinquin GP, Tequi P, Palotiai S, Shrout M. Functional fluids comprising alkyl toluene sulfonates. US 2008/0119378 A1; 2008.
Sulek, 2010, The effect of concentration on lubricating properties of aqueous solutions of sodium lauryl sulfate and ethoxylated sodium lauryl sulfate, Tribol Lett, 40, 337, 10.1007/s11249-010-9668-3
Zeng, 2007, The tribological behaviors of hydroxyl-containing dithiocarbamate-triazine derivatives as additives in rapeseed oil, Tribol Int, 40, 560, 10.1016/j.triboint.2006.05.005
Lam WY, Loper JT. Titanium-containing lubricating oil composition. US 2007/0111908 A1; 2007.
Lam WY, Loper JT, Esche JRCK, Dudding CJ, Growcott P, Fagan A, et al. Titanium-containing lubricating oil composition. US 7879774; 2011.
Nikolov, 2009, Tribological characteristics at running-in of repaired tractor engines using friction modifiers, Ind Lubr Tribol, 61, 209, 10.1108/00368790910960048
Williams, 1994
Spikes, 2002, Film-forming additives-direct and indirect ways to reduce friction, Lubr Sci, 14, 147, 10.1002/ls.3010140204
Sunqing, 1999, A review of ultrafine particles as antiwear additives and friction modifiers in lubricating oils, Lubr Sci, 11, 217, 10.1002/ls.3010110302
Bakunin, 2005, Recent achievements in the synthesis and application of inorganic nanoparticles as lubricant components, Lubr Sci, 17, 127, 10.1002/ls.3010170202
Akbulut, 2012, Nanoparticle-based lubrication systems, J Powder Metall Min, 1, e101, 10.4172/2168-9806.1000e101
Chinas-Castillo, 2003, Mechanism of action of colloidal solid dispersions, J Tribol, 125, 552, 10.1115/1.1537752
Sun, 2005, High temperature tribological behaviors of nano-diamond as oil additive, J Cent South Univ T, 12, 181, 10.1007/s11771-005-0036-7
Wu, 2007, Experimental analysis of tribological properties of lubricating oils with nanoparticle additives, Wear, 262, 819, 10.1016/j.wear.2006.08.021
Kharlamov, 1999, The influence of Cu–Sn alloy fine powder on mass transfer subjected to sliding friction, Frict Wear, 20, 333
Zhou, 1999, Study on the structure and tribological properties of surface-modified Cu nanoparticles, Mater Res Bull, 34, 1361, 10.1016/S0025-5408(99)00150-6
Hu, 2002, Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive, Wear, 252, 370, 10.1016/S0043-1648(01)00862-6
Rastogi, 2002, Application of molybdenum complexes of 1-aryl-2,5-dithiohydrazodicarbonamides as extreme pressure lubricant additives, Wear, 252, 686, 10.1016/S0043-1648(01)00878-X
Liu, 2004, Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface, Tribol Lett, 17, 961, 10.1007/s11249-004-8109-6
Tao, 1996, The ball-bearing effect of diamond nanoparticles as an oil additive, J Phys D: Appl Phys, 29, 2932, 10.1088/0022-3727/29/11/029
Lee, 2009, Understanding the role of nanoparticles in nano-oil lubrication, Tribol Lett, 35, 127, 10.1007/s11249-009-9441-7
Yu, 2008, Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant, T Nonferr Metal Soc, 18, 636, 10.1016/S1003-6326(08)60111-9
Chang, 2010, Enhancement effect of nanoparticles on the sliding wear of short fiber-reinforced polymer composites: a critical discussion of wear mechanisms, Tribol Int, 43, 2355, 10.1016/j.triboint.2010.08.011
Tenne, 1992, Polyhedral and cylindrical structures of tungsten disulphide, Nature, 360, 444, 10.1038/360444a0
Rapoport, 1997, Hollow nanoparticles of WS2 as potential solid-state lubricants, Nature, 387, 791, 10.1038/42910
Golan, 1999, Microtribology and direct force measurement of WS2 nested fullerene-like nanostructures, Adv Mater, 11, 934, 10.1002/(SICI)1521-4095(199908)11:11<934::AID-ADMA934>3.0.CO;2-L
Rapoport, 1999, Inorganic fullerene-like material as additives to lubricants: structure–function relationship, Wear, 225, 975, 10.1016/S0043-1648(99)00040-X
Joly-Pottuz, 2005, Ultralow-friction and wear properties of IF-WS2 under boundary lubrication, Tribol Lett, 18, 477, 10.1007/s11249-005-3607-8
Rosentsveig, 2009, Fullerene-like MoS2 nanoparticles and their tribological behavior, Tribol Lett, 36, 175, 10.1007/s11249-009-9472-0
Tannous, 2011, Understanding the tribochemical mechanisms of IF-MoS2 nanoparticles under boundary lubrication, Tribol Lett, 41, 55, 10.1007/s11249-010-9678-1
Tevet, 2011, Friction mechanism of individual multilayered nanoparticles, Proc Natl Acad Sci USA, 108, 19901, 10.1073/pnas.1106553108
Thostenson, 2001, Advances in the science and technology of carbon nanotubes and their composites: a review, Compos Sci Technol, 61, 1899, 10.1016/S0266-3538(01)00094-X
Ku, 2010, Tribological effects of fullerene (C60) nanoparticles added in mineral lubricants according to its viscosity, Int J Precis Eng Man, 11, 607, 10.1007/s12541-010-0070-8
Cursaru, 2012, The efficiency of Co-based single-wall carbon nanotubes (SWNTs) as an AW/EP additive for mineral base oils, Wear, 290–291, 133, 10.1016/j.wear.2012.04.019
Peng, 2007, Tribological behaviors of surfactant-functionalized carbon nanotubes as lubricant additive in water, Tribol Lett, 25, 247, 10.1007/s11249-006-9176-7
Pei, 2008, Synthesis of water-soluble carbon nanotubes via surface initiated redox polymerization and their tribological properties as water-based lubricant additive, Eur Polym J, 44, 2458, 10.1016/j.eurpolymj.2008.06.016
Yu, 2008, A novel lubricant additive based on carbon nanotubes for ionic liquids, Mater Lett, 62, 2967, 10.1016/j.matlet.2008.01.128
Filleter, 2009, Friction and dissipation in epitaxial graphene films, Phys Rev Lett, 102, 086102, 10.1103/PhysRevLett.102.086102
Lee, 2010, Frictional characteristics of atomically thin sheets, Science, 328, 76, 10.1126/science.1184167
Song, 2012, Preparation and tribological properties of graphene/poly(ether ether ketone) nanocomposites, J Mater Sci, 47, 6436, 10.1007/s10853-012-6574-0
Kappagantula, 2012, Experimentally measured thermal transport properties of aluminum–polytetrafluoroethylene nanocomposites with graphene and carbon nanotube additives, Int J Heat Mass Transfer, 55, 817, 10.1016/j.ijheatmasstransfer.2011.10.026
Song, 2013, Preparation and tribological behaviors of poly(ether ether ketone) nanocomposite films containing graphene oxide nanosheets, J Nanopart Res, 15, 1, 10.1007/s11051-013-1433-8
Berman, 2013, Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen, Carbon, 59, 167, 10.1016/j.carbon.2013.03.006
Berman, 2013, Few layer graphene to reduce wear and friction on sliding steel surfaces, Carbon, 54, 454, 10.1016/j.carbon.2012.11.061
Eswaraiah, 2011, Graphene-based engine oil nanofluids for tribological applications, ACS Appl Mater Interfaces, 3, 4221, 10.1021/am200851z
Song, 2011, Frictional behavior of oxide graphene nanosheets as water-base lubricant additive, Appl Phys A: Mater Sci Process, 105, 827, 10.1007/s00339-011-6636-1
Senatore, 2013, Graphene oxide nanosheets as effective friction modifier for oil lubricant: materials, methods, and tribological results, ISRN Tribol, 2013, 425809, 10.5402/2013/425809
Lin, 2011, Modification of graphene platelets and their tribological properties as a lubricant additive, Tribol Lett, 41, 209, 10.1007/s11249-010-9702-5
Zhang, 2011, Tribological properties of oleic acid-modified graphene as lubricant oil additives, J Phys D: Appl Phys, 44, 205303, 10.1088/0022-3727/44/20/205303
Choudhary, 2012, Dispersion of alkylated graphene in organic solvents and its potential for lubrication applications, J Mater Chem, 22, 21032, 10.1039/c2jm34741e
Song, 2012, Synthesis of α-Fe2O3 nanorod/graphene oxide composites and their tribological properties, J Mater Chem, 22, 895, 10.1039/C1JM13740A
Zhou, 2000, Tribological behavior and lubricating mechanism of Cu nanoparticles in oil, Tribol Lett, 8, 213, 10.1023/A:1019151721801
Tarasov, 2002, Study of friction reduction by nanocopper additives to motor oil, Wear, 252, 63, 10.1016/S0043-1648(01)00860-2
Zhang, 2009, Performance and anti-wear mechanism of Cu nanoparticles as lubricating oil additives, Ind Lubr Tribol, 61, 311, 10.1108/00368790910988426
Pan, 2010, Synthesis and tribological behavior of oil-soluble Cu nanoparticles as additive in SF 15W/40 lubricating oil, Rare Metal Mater Eng, 39, 1711, 10.1016/S1875-5372(10)60129-4
Xiong, 2012, Preparation and evaluation of tribological properties of Cu nanoparticles surface modified by tetradecyl hydroxamic acid, Tribol Lett, 46, 211, 10.1007/s11249-012-9940-9
Kolodziejczyk, 2007, Surface-modified Pd nanoparticles as a superior additive for lubrication, J Nanopart Res, 9, 639, 10.1007/s11051-006-9124-3
Devlin, 2009, Friction and film-formation properties of oil-soluble inorganic nanoparticles, SAE Int J Fuels Lubr, 1, 1503, 10.4271/2008-01-2460
Chou, 2010, Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles, Tribol Int, 43, 2327, 10.1016/j.triboint.2010.08.006
Sun, 2010, Synthesis and tribology properties of stearate-coated Ag nanoparticles, Tribol Trans, 53, 174, 10.1080/10402000903097445
Hernández Battez, 2008, CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants, Wear, 265, 422, 10.1016/j.wear.2007.11.013
Ingole, 2013, Tribological behavior of nano TiO2 as an additive in base oil, Wear, 301, 776, 10.1016/j.wear.2013.01.037
Gusain, 2013, Ultrasound assisted shape regulation of CuO nanorods in ionic liquids and their use as energy efficient lubricant additives, J Mater Chem A, 1, 5612, 10.1039/c3ta10248c
Shi, 2004, Sliding wear behavior of epoxy containing nano-Al2O3 particles with different pretreatments, Wear, 256, 1072, 10.1016/S0043-1648(03)00533-7
Hernandez Battez, 2006, The tribological behaviour of ZnO nanoparticles as an additive to PAO 6, Wear, 261, 256, 10.1016/j.wear.2005.10.001
Radice, 2006, Effect of electrochemical and mechanical parameters on the lubrication behaviour of Al2O3 nanoparticles in aqueous suspensions, Wear, 261, 1032, 10.1016/j.wear.2006.03.034
Song, 2012, Synthesis of monodispersed ZnAl2O4 nanoparticles and their tribology properties as lubricant additives, Mater Res Bull, 47, 4305, 10.1016/j.materresbull.2012.09.013
Ma, 2009, Anti-wear and reduce-friction ability of ZrO2/SiO2 self-lubricating composites, Adv Mater Res, 79, 1863, 10.4028/www.scientific.net/AMR.79-82.1863
Mangam, 2010, Friction and wear behavior of Cu–CeO2 nanocomposite coatings synthesized by pulsed electrodeposition, Surf Coat Technol, 205, 801, 10.1016/j.surfcoat.2010.07.119
Jiao, 2011, The tribology properties of alumina/silica composite nanoparticles as lubricant additives, Appl Surf Sci, 257, 5720, 10.1016/j.apsusc.2011.01.084
Hu, 2010, The effect of morphology on the tribological properties of MoS2 in liquid paraffin, Tribol Lett, 40, 155, 10.1007/s11249-010-9651-z
Rapoport, 2001, Friction and wear of bronze powder composites including fullerene-like WS2 nanoparticles, Wear, 249, 149, 10.1016/S0043-1648(01)00519-1
Wu, 2009, Preparation and tribological properties of WS2 nanoparticles modified by trioctylamine, Proc Inst Mech Eng J–J Eng Tribol, 223, 695
Lahouij, 2012, Lubrication mechanisms of hollow-core inorganic fullerene-like nanoparticles: coupling experimental and computational works, Nanotechnology, 23, 375701, 10.1088/0957-4484/23/37/375701
Tannous, 2010, Synthesis and tribological performance of novel MoxW1−xS2 (0⩽x⩽1) inorganic fullerenes, Tribol Lett, 37, 83, 10.1007/s11249-009-9493-8
Zhang, 2007, WS2 nanorods prepared by self-transformation process and their tribological properties as additive in base oil, Mater Sci Eng A, 454–455, 487, 10.1016/j.msea.2006.11.072
Kang, 2008, Synthesis and tribological property study of oleic acid-modified copper sulfide nanoparticles, Wear, 265, 150, 10.1016/j.wear.2007.09.009
Min, 2008, Frictional properties of surfactant-coated rod-shaped nanoparticles in dry and humid dodecane, J Phys Chem B, 112, 14395, 10.1021/jp802535j
Yang, 2008, Synthesis and tribological properties of WSe2 nanorods, Nanoscale Res Lett, 3, 481, 10.1007/s11671-008-9183-8
Normand, 1998, Micellar calcium borate as an antiwear additive, Tribol Lett, 5, 235, 10.1023/A:1019129305504
Varlot, 1999, A dual-analysis approach in tribochemistry: application to ZDDP/calcium borate additive interactions, Tribol Lett, 6, 181, 10.1023/A:1019167808656
Zhao, 2014, Tribological properties of nano-calcium borate as lithium grease additive, Lubr Sci, 26, 43, 10.1002/ls.1227
Hao, 2012, Preparation and tribological properties of a kind of lubricant containing calcium borate nanoparticles as additives, Ind Lubr Tribol, 64, 16, 10.1108/00368791211196853
Li, 2012, Tribological synergism of surface-modified calcium borate nanoparticles and sulfurized olefin, Ind Lubr Tribol, 64, 217, 10.1108/00368791211232762
Çelik, 2013, Effect of nano hexagonal boron nitride lubricant additives on the friction and wear properties of AISI 4140 steel, Particul Sci Technol, 31, 501, 10.1080/02726351.2013.779336
Cho, 2013, Evaluation of hexagonal boron nitride nano-sheets as a lubricant additive in water, Wear, 302, 981, 10.1016/j.wear.2012.12.059
Zeng, 2013, Superlubricity behaviors of Si3N4/DLC films under PAO oil with nano boron nitride additive lubrication, Surf Interface Anal, 45, 1283, 10.1002/sia.5269
Zhang, 2009, Performance and anti-wear mechanism of CaCO3 nanoparticles as a green additive in poly-alpha-olefin, Tribol Int, 42, 1029, 10.1016/j.triboint.2009.02.012
Wang, 2007, Tribological investigation of CaF2 nanocrystals as grease additives, Tribol Int, 40, 1179, 10.1016/j.triboint.2006.12.003
Liu, 2010, Study of preparation and tribological properties of rare earth nanoparticles in lubricating oil, Tribol Int, 43, 1082, 10.1016/j.triboint.2009.12.026
Li, 2011, Synthesis of surface-modified oil-soluble silica nanospheres and investigation of their tribological behavior, Adv Mater Res, 266, 30, 10.4028/www.scientific.net/AMR.266.30
Liu, 2011, Shape controlled synthesis and tribological properties of CeVO4 nanoparticles aslubricating additive, J Rare Earth, 29, 688, 10.1016/S1002-0721(10)60523-6
Yu, 2012, Preparation and tribological properties of surface-modified nano-Y2O3 as additive in liquid paraffin, Appl Surf Sci, 263, 655, 10.1016/j.apsusc.2012.09.130
Zhao, 2012, Tribological properties of serpentine, La(OH)3 and their composite particles as lubricant additives, Wear, 288, 72, 10.1016/j.wear.2012.02.009