A review of nanoindentation continuous stiffness measurement technique and its applications

Materials Characterization - Tập 48 Số 1 - Trang 11-36 - 2002
Xiaodong Li1, Bharat Bhushan1
1Nanotribology Laboratory for Information Storage and MEMS/NEMS, Ohio State University, 206 West 18th Avenue, Columbus, OH 43210-1107, USA

Tóm tắt

Từ khóa


Tài liệu tham khảo

Tabor, 1951

Bhushan, 1999

Tabor, 1996, Indentation hardness: fifty years on a personal view, Philos Mag A, 74, 1207, 10.1080/01418619608239720

Pethica, 1983, Hardness measurement at penetration depths as small as 20 nm, Philos Mag A, 48, 593, 10.1080/01418618308234914

Oliver, 1992, An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments, J Mater Res, 7, 1564, 10.1557/JMR.1992.1564

Pharr, 1998, Measurement of mechanical properties by ultra-low load indentation, Mater Sci Eng, A, 253, 151, 10.1016/S0921-5093(98)00724-2

Bulychev, 1975, Determining Young's modulus from the indenter penetration diagram, Zavod Lab, 41, 1137

Bhushan, 1996, Nanoindentation and picoindentation measurements using a capacitive transducer system in atomic force microscopy, Philos Mag A, 74, 1117, 10.1080/01418619608239712

Bhushan, 1999, Chemical, mechanical and tribological characterization of ultra-thin and hard amorphous carbon coatings as thin as 3.5 nm: recent developments, Diamond Relat Mater, 8, 1985, 10.1016/S0925-9635(99)00158-2

Bhushan, 2000

Li, 1997, Fracture mechanisms of thin amorphous carbon films in nanoindentation, Acta Mater, 45, 4453, 10.1016/S1359-6454(97)00143-2

Li, 1998, Measurement of fracture toughness of ultra-thin amorphous carbon films, Thin Solid Films, 315, 214, 10.1016/S0040-6090(97)00788-8

Li, 1999, Evaluation of fracture toughness of ultra-thin amorphous carbon coatings deposited by different deposition techniques, Thin Solid Films, 355–356, 330, 10.1016/S0040-6090(99)00446-0

Bhushan, 1995, Nanoindentation, microscratch, friction and wear studies of coatings for contact recording applications, Wear, 181–183, 743, 10.1016/0043-1648(94)07101-2

Bhushan, 1997, Micromechanical and tribological characterization of doped single-crystal silicon and polysilicon films for microelectromechanical systems devices, J Mater Res, 12, 54, 10.1557/JMR.1997.0010

Bhushan, 1997, Tribological studies of chromium oxide films for magnetic recording applications, Thin Solid Films, 311, 67, 10.1016/S0040-6090(97)00453-7

Li, 1998, Micromechanical and tribological characterization of hard amorphous carbon coatings as thin as 5 nm for magnetic recording heads, Wear, 220, 51, 10.1016/S0043-1648(98)00242-7

Li, 1999, Micro/nanomechanical and tribological characterization of ultra-thin amorphous carbon coatings, J Mater Res, 14, 2328, 10.1557/JMR.1999.0309

Li, 1999, Mechanical and tribological studies of ultra-thin hard carbon overcoats for magnetic recording heads, Z Metallkd, 90, 820

Li, 1999, Micro/nanomechanical characterization of ceramic films for microdevices, Thin Solid Films, 340, 210, 10.1016/S0040-6090(98)01153-5

Pethica, 1989, Mechanical properties of nanometer volumes of material: use of the elastic response of small area indentations, vol. 130, 13

Syed Asif, 1997, Nano scale creep and the role of defects, vol. 436, 201

Sneddon, 1965, The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile, Int J Eng Sci, 3, 47, 10.1016/0020-7225(65)90019-4

Doerner, 1986, A method for interpreting the data from depth-sensing indentation instruments, J Mater Res, 1, 601, 10.1557/JMR.1986.0601

Li, 2000, Development of continuous stiffness measurement technique for composite magnetic tapes, Scr Mater, 42, 929, 10.1016/S1359-6462(00)00316-X

Li, 2000, Continuous stiffness measurement and creep behavior of composite magnetic tapes, Thin Solid Films, 377–378, 401, 10.1016/S0040-6090(00)01368-7

Li, 2001, Continuous stiffness measurements of layered materials used in magnetic storage devices, J Information Storage Process Syst, 3, 131

Li, 2001, Time-dependent mechanical properties and tribological behavior of magnetic tapes, Wear, 251, 1150, 10.1016/S0043-1648(01)00724-4

Li, 2001, Dynamic mechanical characterization of magnetic tapes using nanoindentation techniques, IEEE Trans Magn, 37, 1616, 10.1109/20.950917

Bhushan, 1999

Li X, Bhushan B. Nanofatigue studied of ultra-thin hard carbon overcoats used in magnetic storage devices. J Appl Phys [in press].

Bhushan, 1996

Ion, 1990, Micron-scale indentation of amorphous and drawn PET surfaces, J Mater Sci, 25, 1444, 10.1007/BF00585463

Li, 1997, Micromechanical characterization of magnetic tapes, IEEE Trans Magn, 33, 3208, 10.1109/20.617893

Ramsey, 1991, Modeling the contact response of coated systems, Surf Coat Technol, 49, 504, 10.1016/0257-8972(91)90108-9