A review of defect types and nondestructive testing techniques for composites and bonded joints

Hull, 1981 Jones, 1975 Tsai, 1980 Ni, 1984, A rational method of obtaining the dynamic mechanical properties of laminae for predicting the stiffness and damping of laminated plates and beams, Composites, 15, 193, 10.1016/0010-4361(84)90274-X Adams, 1984 Adams, 1987, Mechanics of adhesive lap joints Adams, 1976, The effect of steam and hot air on the shear strength of glass and carbon fibre reinforced plastics 1985 Hagemaier, 1979, Nondestructive testing of advanced composites, Materials Evaluation, 37, 43 Stone, 1978, Non-destructive inspection of composite materials for aircraft structural applications, Brit J NDT, 20, 65 Scott, 1982, NDI of composite materials, NDT International, 75, 10.1016/0308-9126(82)90001-3 Bar-Cohen, 1986, NDE of fiber-reinforced composite materials — a review, Materials Evaluation, 44, 446 Reynolds, 1985, Nondestructive testing (NDT) of fibre-reinforced composite materials, Materials and Design, 5, 256, 10.1016/0261-3069(85)90110-4 Prakash, 1980, Nondestructive testing of composites, Composites, 11, 217, 10.1016/0010-4361(80)90428-0 Henneke, 1979, A review of the state of the art of nondestructive evaluation of advanced composite materials Guyott, 1986, The non-destructive testing of adhesively bonded structure: a review, J Adhesion, 20, 129, 10.1080/00218468608074943 1987, 1 Matiss, I.G. and Shtrauss, V.D. Multi-parameter dielectric relaxation spectrometry for quality control of composites NDT International, this issue Dai, Z.Z. and Harris, B. Acoustic emission study of impact damaged GRP pipes NDT International, this issue Williams, 1985, Promising quantitative non-destructive evaluation techniques for composite materials, Materials Evaluation, 43, 561 Stone, 1987, Non-destructive evaluation of composite structures — an overview, 1.28 Stone, 1975, Ultrasonic attenuation as a measure of void content in carbon-fibre reinforced plastics, Non-Destructive Testing, 8, 137, 10.1016/0029-1021(75)90023-7 Speake, 1974, Measurement of the cure of resins by ultrasonic techniques, J Phys D: Appl Phys, 7, 412, 10.1088/0022-3727/7/3/307 Lindrose, 1978, Ultrasonic wave and moduli changes in a curing epoxy resin, Experimental Mechanics, 227, 10.1007/BF02328418 Rose, 1983, A feasibility study on the nondestructive evaluation of an adhesively bonded metal to metal bond: an ultrasonic pulse echo approach, Brit J NDT, 25, 67 Hagemaier, 1985, Ultrasonic inspection of carbon-epoxy composites, Materials Evaluation, 43, 556 Reynolds, 1978, The analysis of fibre-reinforced porous composite materials by the measurement of ultrasonic wave velocities, Ultrasonics, 16, 159, 10.1016/0041-624X(78)90071-9 Kaelble, 1977, Methods for detecting moisture degradation in graphite-epoxy composites, Materials Evaluation, 35, 103 Prakash, 1977, Ultrasonic determination of lay-up order in cross-plied CFRP, Composites, 8, 100, 10.1016/0010-4361(77)90066-0 Bar-Cohen, 1982, Acoustic-backscattering imaging of subcritical flaws in composites, Materials Evaluation, 40, 970 Moran, 1985, High-resolution imaging of microcracks in composites, Materials Evaluation, 43, 536 Van Dreumel, 1983, Polar-scan, a non-destructive test method for the inspection of layer orientation and stacking order in advanced fiber composites, Materials Evaluation, 41, 1060 Van Dreumel, 1981, Nondestructive composite laminate characterisation by means of ultrasonic polar-scan, Materials Evaluation, 39, 922 Bar-Cohen, 1985, Nondestructive evaluation of composite laminates by leaky Lamb waves, Review of Progress in Quantitative NDE Rose, 1973, Ultrasonic procedures for inspecting composite tubes, 521, 311 Gericke, 1976, Detection of delaminations by ultrasonic spectroscopy, IEEE Transactions on Sonics and Ultrasonics, SU-23, 339, 10.1109/T-SU.1976.30888 Cousins, 1977, The use of ultrasonic spectroscopy in the location of delaminations in fibre-reinforced polymers, Composites, 8, 145, 10.1016/0010-4361(77)90008-8 Guyott, 1988, The measurement of through thickness plate vibration using a pulsed ultrasonic transducer, J Acoustical Society of America, 83, 623, 10.1121/1.396156 Guyott, 1988, The ultrasonic vibration characteristics of adhesive joints, J Acoustical Society of America, 83, 632, 10.1121/1.396157 Guyott, C.C.H. and Cawley, P. ‘Evaluation of the cohesive p properties of adhesive joints using ultrasonic spectroscopy’ NDT International this issue Rose, 1984, Elements of a feature-based ultrasonic inspection system, Materials Evaluation, 42, 210 Nestleroth, 1985, Physically based ultrasonic feature mapping for anomaly classification in composite materials, Materials Evaluation, 43, 541 Lorenzo, 1984, Detection of ply cracking through wave attenuation Vary, 1982, Acousto-ultrasonic characterisation of fiber reinforced composites, Materials Evaluation, 40, 650 dos Reis, 1986, Adhesive bond strength quality assurance using the acousto-ultrasonic technique, Brit J NDT, 28, 357 Russell-Floyd, R. and Phillips, M.G. ‘A critical assessment of acousto-ultrasonics as a method of non-destructive examination for carbon-fibre-reinforced thermoplastic laminates’ NDT International, this issue Schliekelmann, 1975, Non-destructive testing of bonded joints, recent developments in testing systems, Non-Destructive Testing, 8, 100, 10.1016/0029-1021(75)90161-9 Curtis, 1982, Non-destructive testing of adhesively bonded structures with acoustic methods, 495 Wilkinson, 1982, A comparison of NDT assessment for quality control and the subsequent NDT ability to follow ageing degradation of adhesive bonded joints in aluminium alloy, Final report MOD contract A93f/65 Guyott, 1987, Use of the Fokker Bond Tester on joints with varying adhesive thickness, Proc I Mech E, 201 part B, 41, 10.1243/PIME_PROC_1987_201_043_02 Crane, 1976, Measurement of composite ply orientation using a radiographic fringe technique, Materials Evaluation, 34, 79 Theiry, 1987, Use of a medical tomodensitometer in non-destructive testing of composite materials, 1.369 Jones, T.S., Polansky, D. and Berger, H. ‘Radiation inspection methods for composites’ NDT International this issue Mahoon, 1987, The use of radio-opague penetrants for study of damage in composites Dance, 1979, Neutron radiographic non-destructive inspection for bonded composite structures, STP 696, 57 Martin, 1977, An analysis of radiographic techniques for measuring resin content in graphite fiber reinforced epoxy resin composites, Materials Evaluation, 35, 65 Owston, 1976, Eddy current methods for the examination of carbon fibre reinforced epoxy resins, Materials Evaluation, 34, 237 Dingwall, 1976, Non-destructive inspection and volume fraction determination of CFRP using an eddy current method, RAE technical report, 76078 Vernon, 1984, Detection and measurement of broken fiber type defects in graphite epoxy using eddy current methods, Non-destructive Testing Communications, 1, 187, 10.1080/10589758408952905 Prakash, 1976, Eddy current method for the determination of lay-up order in cross-plied CFRP laminates, Composites, 7, 88, 10.1016/0010-4361(76)90018-5 Pye, 1981, Heat emission from damaged composite materials and its use in nondestructive testing, J Phys D: Appl Phys, 14, 927, 10.1088/0022-3727/14/5/026 Reynolds, 1984, Video-compatible thermography, Brit J NDT, 26, 40 Reynolds, W.N. ‘Inspection of laminates and adhesive bonds by pulse-video thermography’ NDT International this issue Matthews, 1988, Safer with the heat on, The Times Adams, 1985, Vibration techniques in non-destructive testing, 8, 303 Cawley, 1985, Natural frequency measurements for production quality control of fibre composites, Composites, 16, 23, 10.1016/0010-4361(85)90654-8 Hockley, 1972, Non-destructive testing by holography, Brit J NDT, 14, 115 Fagot, 1980, Holographic nondestructive testing of materials using pulsed lasers Løkberg, O.J. and Malmo, J.T. ‘Detection of defects in composite materials by TV holography’ NDT International this issue Cawley, 1988, The mechanics of the coin-tap method of non-destructive testing, J Sound and Vibration, 122, 299, 10.1016/S0022-460X(88)80356-0 Cawley, 1987, The non-destructive testing of honeycomb structures by the coin-tap technique, 1.415 Cawley, 1984, The impedance method of non-destructive inspection, NDT International, 17, 59, 10.1016/0308-9126(84)90045-2 Cawley, 1985, The operation of NDT instruments based on the impedance method, J Composite Structures, 3, 215, 10.1016/0263-8223(85)90054-6 Cawley, 1987, The sensitivity of the mechanical impedance method of non-destructive testing, NDT International, 20, 209, 10.1016/0308-9126(87)90243-4 Pilarski, A. and Rose, J.L. ‘Ultrasonic oblique incidence for improved sensitivity in interface weakness determination’ NDT International this issue Hagemaier, 1971, Nondestructive testing of graphite fiber composite structures, Materials Evaluation, 29, 133