A review of cryogenic cooling in machining processes
Tóm tắt
Từ khóa
Tài liệu tham khảo
Kitagawa, 1990, Plasma hot machining for new engineering materials, Wear, 139, 251, 10.1016/0043-1648(90)90049-G
Ezugwu, 1991, The effect of high-pressure coolant supply when machining a heat-resistant nickel-based superalloy, Lubrication Engineering, 47, 751
Rahman, 2001, Evaluation of minimal quantities of lubricant in end milling, International Journal of Advanced Manufacturing Technology, 18, 235, 10.1007/s001700170063
El Baradie, 1996, Cutting fluids: Part I. Characterisation, Journal of Materials Processing Technology, 56, 786, 10.1016/0924-0136(95)01892-1
Shaw, 1986
Adler, 2006, Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns, Machining Science and Technology, 10, 23, 10.1080/10910340500534282
W.A. Carter, Metal Machining, Part VI, Cutting Fluids, Machinery Lloyd, Overseas Edition, 1956.
Seah, 1995, The effect of applying coolant on tool wear in metal machining, Journal of Materials Processing Technology, 48, 495, 10.1016/0924-0136(94)01688-W
Diniz, 2002, Cutting conditions for finish turning process aiming: the use of dry cutting, International Journal of Machine Tools and Manufacture, 42, 899, 10.1016/S0890-6955(02)00028-7
El Baradie, 1996, Cutting fluids: Part II. Recycling and clean machining, Journal of Materials Processing Technology, 56, 798, 10.1016/0924-0136(95)01893-X
Cutting Fluid Health Hazards, 〈http://www.mfg.mtu.edu/cyber-man/index.html〉, 2004.
〈http://www.tuik.gov.tr〉, 2007.
Uehara, 1969, Chip formation, surface roughness and cutting force in cryogenic machining, Annals of CIRP, 17, 409
Uehara, 1970, Characteristics of tool wear in cryogenic machining, Annals of CIRP, 18, 273
Hong, 2001, Economical and ecological cryogenic machining, Journal of Manufacturing Science and Engineering, 123, 331, 10.1115/1.1315297
Chattopadhyay, 1985, Improvements in grinding steels by cryogenic cooling, Precision Engineering, 7, 93, 10.1016/0141-6359(85)90098-4
Paul, 1995, Effects of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding, Cryogenics, 35, 515, 10.1016/0011-2275(95)98219-Q
Paul, 1996, The effect of cryogenic cooling on grinding forces, International Journal of Machine Tools and Manufacture, 36, 63, 10.1016/0890-6955(95)92629-D
Paul, 2006, Environmentally conscious machining and grinding with cryogenic with cryogenic cooling, Machining Science and Technology, 10, 87, 10.1080/10910340500534316
M. Ahmed, Cryogenic drilling of Kevlar composite laminated, Master of Science in Mechanical Engineering, King Fahd University of Petroleum and Minerals, 2004.
Gruman Aircraft Engineering, Cryogenic coolants speed titanium machining, Machinery, July (1965) 101–102.
Fillipi, 1971, Facing milling at −180°C, Annals of CIRP, 19, 399
Yu, 2006, Effects of cryogenic nitrogen gas jet on machinability of Ti-alloy in high speed milling, China Mechanical Engineering, 17, 1183
S.Y. Hong, X. Qu, A. Lee, Economical cryogenic milling for environmentally safe manufacturing, Technical Paper—Society of Manufacturing Engineers, in: Proceedings of the NAMRXXXVI Conference, May, Atlanta, USA, 1998.
S.Y. Hong, Milling tool with rotary cryogenic coolant coupling, Patent Cooperation Treaty (PCT), WO 99/60079 (1999).
〈http://en.wikipedia.org/wiki/Cryogenic〉, 2007.
〈http://encarta.msn.com/encyclopedia_761563758/Cryogenics.html〉, 2007.
Hong, 1999, Thermal aspects, material considerations and cooling strategies in cryogenic machining, Clean Products and Processes, 1, 107
Silva, 1999, Cutting temperature: prediction and measurement methods—a review, Journal of Materials Processing Technology, 88, 195, 10.1016/S0924-0136(98)00395-1
O’Sullivan, 2001, Temperature measurement in single point turning, Journal of Materials Processing Technology, 118, 301, 10.1016/S0924-0136(01)00853-6
Abukhshim, 2006, Heat generation and temperature prediction in metal cutting: a review and implications for high speed machining, International Journal of Machine Tools and Manufacture, 46, 782, 10.1016/j.ijmachtools.2005.07.024
Majumdar, 2005, Finite element analysis of temperature rise in metal cutting processes, Applied Thermal Engineering, 25, 2152, 10.1016/j.applthermaleng.2005.01.006
Ng, 1999, Modelling of temperature and forces when orthogonally machining hardened steel, International Journal of Machine Tools and Manufacture, 39, 885, 10.1016/S0890-6955(98)00077-7
Groover, 1971, A continuing study in the determination of temperatures in metals cutting using remote thermocouples, Transactions of the ASME, Journal of Engineering Industry, 603, 10.1115/1.3427967
Komanduri, 2001, Thermal modelling of the metal cutting process—Part III: Temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source, International Journal of Mechanical Sciences, 43, 89, 10.1016/S0020-7403(99)00105-8
Ay, 1998, Heat transfer and life of metal cutting tools in turning, International Journal of Heat Mass Transfer, 41, 613, 10.1016/S0017-9310(97)00105-1
Chou, 1997, Tool wear mechanism in continuous cutting of hardened tool steels, Wear, 212, 59, 10.1016/S0043-1648(97)00139-7
Gu, 1999, Tool life and wear mechanism of uncoated and coated milling inserts, Wear, 225–229, 273, 10.1016/S0043-1648(99)00074-5
Groover, 1996
Liu, 2002, Wear patterns and mechanisms of cutting tools in high-speed face milling, Journal of Materials Processing Technology, 129, 222, 10.1016/S0924-0136(02)00605-2
Casto, 1997, Wear rates and wear mechanisms of alumina-based tools cutting steel at a low cutting speed, Wear, 208, 67, 10.1016/S0043-1648(96)07376-0
Wang, 2004, Stress analyses of CBN insert in hybrid machining of RBSN ceramic, Machining Science and Technology, 8, 1, 10.1081/MST-120034238
Li, 1989, Cryogenic ultra-precision machining of ferrous metals with natural diamond tools, Chinese Journal of Mechanical Engineering, 25, 69, 10.1186/s10033-018-0265-y
Evans, 1991, Cryogenic diamond turning of stainless steel, CIRP Annals, 40, 571, 10.1016/S0007-8506(07)62056-3
R. Ghosh, Z. Zurecki, J.H. Frey, Cryogenic machining with brittle tools and effects on tool life, in: ASME, International Mechanical Engineering Congress, Washington, November 2003, pp. 201–209.
Hong, 2001, Micro-temperature manipulation in cryogenic machining of low carbon steel, Journal of Materials Processing Technology, 116, 22, 10.1016/S0924-0136(01)00836-6
Jawahir, 1988, The chip control factor in machinability assessments: recent trends, Journal of Mechanical Working Technology, 17, 213, 10.1016/0378-3804(88)90023-X
Bhattacharyya, 1993, Cryogenic machining of Kevlar composites, Materials and Manufacturing Processes, 8, 631, 10.1080/10426919308934871
S.Y. Hong, Y. Ding, Manipulating machining temperature for chip breaking improvement, in: ASME, International Symposium on Information Storage and Processing Systems, Atlanta, 1996, pp. 395–402.
Hong, 1999, Improving low carbon steel chip breakability by cryogenic chip cooling, International Journal of Machine Tools and Manufacture, 39, 1065, 10.1016/S0890-6955(98)00074-1
Ahmed, 2007, Effectiveness of cryogenic machining with modified tool holder, Journal of Materials Processing Technology, 185, 91, 10.1016/j.jmatprotec.2006.03.123
Hong, 2001, New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti–6Al–4V, International Journal of Machine Tools and Manufacture, 41, 2245, 10.1016/S0890-6955(01)00041-4
Hong, 2001, Cooling approaches and cutting temperatures in cryogenic machining of Ti–6Al–4V, International Journal of Machine Tools and Manufacture, 41, 1417, 10.1016/S0890-6955(01)00026-8
Wang, 1997, Wear of CBN tool in turning of silicon nitride with cryogenic cooling, International Journal of Machine Tools and Manufacture, 37, 319, 10.1016/S0890-6955(96)00037-5
Wang, 2000, Cryogenic machining of hard-to-cut materials, Wear, 239, 168, 10.1016/S0043-1648(99)00361-0
Z. Zurecki, R. Ghosh, J.H. Frey, Finish-turning of hardened powder-metallurgy steel using cryogenic cooling, in: Proceedings of the International Conference on Powder Metallurgy and Particulate Materials, Las Vegas, June 2003.
K.V.B.S.K. Kumar, S.K. Choudhury, Investigation of tool wear and cutting force in cryogenic machining using design of experiments, Journal of Materials Processing Technology, in press, doi:10.1016/j.jmatprotec.2007.10.036.
S.Y. Hong, Cryogenic Machining US Patent No. 5901623 (1999).
Hong, 2000, Economical and ecological cryogenic machining of AISI 304 austenitic stainless steel, Clean Products and Processes, 2, 157, 10.1007/s100980000073
Dhar, 2002, Role of cryogenic cooling on cutting temperature in turning steel, Transactions of the ASME, 124, 146
Dhar, 2002, The influence of cryogenic cooling on tool wear, dimensional accuracy and surface finish in turning AISI 1040 and E4340C steels, Wear, 249, 932, 10.1016/S0043-1648(01)00825-0
Dhar, 2007, Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-4037 steel under cryogenic condition, International Journal of Machine Tools and Manufacture, 47, 754, 10.1016/j.ijmachtools.2006.09.018
Venugopal, 2007, Tool wear in cryogenic turning of Ti–6Al–4V alloy, Cryogenics, 47, 12, 10.1016/j.cryogenics.2006.08.011
Hong, 2001, Friction and cutting forces in cryogenic machining, International Journal of Machine Tools and Manufacture, 41, 2271, 10.1016/S0890-6955(01)00029-3
S. Hong, Advancement of economical cryogenic machining technology, in: Proceedings of Third International Conference on Manufacturing Technology, Hong Kong, 1995, pp. 168–173.
Barron, 1982, Cryogenic treatment of metals to improve wear resistance, Cryogenics, 22, 409, 10.1016/0011-2275(82)90085-6
Lal, 2001, Cryogenic treatment to augment wear resistance of tool and die steels, Cryogenics, 41, 149, 10.1016/S0011-2275(01)00065-0
Yong, 2006, Performance evaluation of cryogenically treated tungsten carbide tools in turning, International Journal of Machine Tools and Manufacture, 46, 2051, 10.1016/j.ijmachtools.2006.01.002
Silva, 2006, Performance of cryogenically treated HSS tools, Wear, 261, 674, 10.1016/j.wear.2006.01.017
Dreger, 1981, Promise of cryogenic processing, Machine Design, 53, 73
Zhao, 1992, Cryogenic properties of some cutting tool materials, Journal of Materials Engineering and Performance, 1, 705, 10.1007/BF02649252
Molinari, 2001, Effect of deep cryogenic treatment on the mechanical properties of tool steels, Journal of Materials Processing Technology, 118, 350, 10.1016/S0924-0136(01)00973-6
Zhao, 1992, Cooling strategies for cryogenic machining from a materials viewpoint, Journal of Materials Engineering and Performance, 1, 669, 10.1007/BF02649248
Ding, 1997, Improvement in chip breaking in machining a low carbon steel by cryogenically precooling the workpiece, Transactions of the ASME, Journal of Manufacturing Science and Engineering, 120, 76, 10.1115/1.2830113
Dhar, 2002, Machining of AISI 4140 steel under cryogenic cooling-tool wear, surface roughness and dimensional deviation, Journal of Materials Processing Technology, 123, 483, 10.1016/S0924-0136(02)00134-6
Ding, 1995, A study of the cutting temperatures in machining processes cooled by liquid nitrogen, Technical Papers of NAMRI, 114
Zhao, 2002, A study of flank wear in orthogonal cutting with internal cooling, Wear, 253, 957, 10.1016/S0043-1648(02)00248-X
Khan, 2008, Improving tool life using cryogenic cooling, Journal of Materials Processing Technology, 196, 149, 10.1016/j.jmatprotec.2007.05.030
Ghosh, 2005, Interrupted hard turning with cryogenically cooled ceramic tools, Transactions of the North American Manufacturing Research Institute of SME, 33, 161
Wang, 2003, Hybrid machining of Inconel 718, International Journal of Machine Tools and Manufacture, 43, 1391, 10.1016/S0890-6955(03)00134-2
Zurecki, 1999, Dry machining of metals with liquid nitrogen, 3rd International Machining and Grinding SME, 1
Paul, 2001, Beneficial effects of cryogenic cooling over dry and wet machining on tool wear and surface finish in turning AISI 1060 steel, Journal of Materials Processing Technology, 116, 44, 10.1016/S0924-0136(01)00839-1
Dhar, 2006, Wear behavior of uncoated carbide inserts under dry, wet and cryogenic cooling conditions in turning C-60 steel, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 28, 146, 10.1590/S1678-58782006000200003
Venugopal, 2003, Turning of titanium alloy with TiB2-coated carbides under cryogenic cooling, Journal of Engineering Manufacture, 217, 1697, 10.1243/095440503772680622
Yong, 2007, Performance of cryogenically treated tungsten carbide tools in milling operations, International Journal of Advanced Manufacturing Technology, 32, 638, 10.1007/s00170-005-0379-0
Chatterjee, 1992, Performance characteristics of cryogenically treated high speed steel drills, International Journal of Production Research, 30, 773, 10.1080/00207543.1992.9728455
Kim, 2004, Cryogenically treated carbide tool performance in drilling thermoplastic composites, Transactions of the North American Manufacturing Research Institute of SME, 32, 79
Stewart, 2004, Cryogenic treatment of tungsten carbide reduces tool wear when machining medium density fibreboard, Forest Products Journal, 54, 53
Stephenson, 2006
Risbood, 2003, Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process, Journal of Materials Processing Technology, 132, 203, 10.1016/S0924-0136(02)00920-2
Azouzi, 1997, On-line prediction of surface finish and dimensional deviation in turning using neural network based sensor fusion, International Journal of Machine Tools and Manufacture, 37, 1201, 10.1016/S0890-6955(97)00013-8
N.R. Dhar, S. Paul, A.B. Chattopadhyay, On effect of cryogenic cooling on tool wear and job dimension and finish in turning Ni–Cr steel, in: ICM 2000, Dhaka, Bangladesh, 24–26 February 2000, pp. 301–310.
Hong, 2006, Lubrication mechanisms of LN2 in ecological cryogenic machining, Machining Science and Technology, 10, 133, 10.1080/10910340500534324
Hong, 2002, Experimental evaluation of friction coefficient and liquid nitrogen lubrication effect in cryogenic machining, Machining Science and Technology, 6, 235, 10.1081/MST-120005958