A review: Evolution of branching T-junction geometry in terms of diameter ratio, to improve phase separation

Chen, 2012, Experimental investigation of two-phase distribution in parallel micro-T channels under adiabatic condition, Chem. Eng. Sci., 84, 706, 10.1016/j.ces.2012.09.023 Bai, 2020, Experimental study of the irreversible pressure loss coefficient at reduced T-junction with flat tube, J. Therm. Anal. Calorim., 141, 267, 10.1007/s10973-020-09537-7 N. Kharoua, Effects of Geometry, Temperature, and Inlet Conditions on the Flow Split in Spheroids Manifold, Int. J. Petrochemical Sci. Eng. 1 (2016) 106–113. https://doi.org/10.15406/ipcse.2016.01.00022. L. Yang, J. Wang, Y. Ma, S. Liu, J. Tang, Y. Zhu, Oil-water-gas three-phase separation in multitube T-junction separators, Water (Switzerland). 11 (2019). https://doi.org/10.3390/W11122655. B.J. Azzopardi, S. Rea, Phase separation using a simple T-junction, Proc. - SPE Annu. Tech. Conf. Exhib. PI (2000) 355–362. https://doi.org/10.2523/63040-ms. Pao, 2014, Computational Analyses of Passive Wet Gas Separation in Branched Piping, MATEC Web of Conferences, 13, 03009, 10.1051/matecconf/20141303009 S.F. Chien, Phase splitting of wet steam in annular flow through a horizontal branching tee, SPE Prod. Facil. 11 (1996) 83–88. https://doi.org/10.2118/28542-PA. Shoham, 1987, Two-phase flow splitting in a tee junction—experiment and modelling, Chem. Eng. Sci., 42, 2667, 10.1016/0009-2509(87)87017-3 Charron, 1995, Gas-liquid annular flow at a vertical tee junction—Part I. Flow separation, Int. J. Multiph. Flow, 21, 569, 10.1016/0301-9322(94)00088-2 Azzopardi, 1999, Effect of side arm diameter on phase split at T-junctions, Proc. - SPE Ann. Tech. Conf. Exhib., 2 Rea, 2001, The Split of Horizontal Stratified Flow at a Large Diameter T-Junction, Chem. Eng. Res. Des., 79, 470, 10.1205/026387601750282409 Hart, 1991, Phase distribution during gas—liquid flow through horizontal dividing junctions, Nucl. Eng. Des., 126, 293, 10.1016/0029-5493(91)90022-A Li-yang, 2008, Oil-Water two-Phase Flow Inside T-Junction, J. Hydro. Ser. B, 20, 147, 10.1016/S1001-6058(08)60040-2 Yang, 2019, State-of-art of branching T-junction: Experiments, modeling, developing prospects and applications, Exp. Therm Fluid Sci., 109, 109895, 10.1016/j.expthermflusci.2019.109895 Saieed, 2016, A review of t-junction geometrical effect on two-phase separation, ARPN J. Eng. Appl. Sci., 11, 14233 Casey, Two-phase pressure drop and phase distribution at reduced horizontal T-Junction: The effect of system pressure, MSc. Diss. 24 (1998) 775–792. https://doi.org/10.1016/S0301-9322(98)00002-0. Azzi, 2010, Gas–liquid two-phase flow division at a micro-T-junction, Chem. Eng. Sci., 65, 3986, 10.1016/j.ces.2010.03.037 Marti, 1997, A unified model for stratified-wavy two-phase flow splitting at a reduced T-junction with an inclined branch arm, Int. J. Multiph. Flow, 23, 725, 10.1016/S0301-9322(97)82477-9 Walters, 1997, Effect of branch diameter on two-phase pressure drop and phase distribution at horizontal tee junctions, Am. Soc. Mech. Eng. Fluids Eng. Div. FED., 16 Saieed, 2018, Experimental investigation on the effect of diameter ratio on two-phase slug flow separation in a T-Junction, J. Petrol. Sci. Eng., 170, 139, 10.1016/j.petrol.2018.06.033 M.A. Mohamed, Phase distribution and separation of gas-liquid flows in an equal-sided impacting tee junction with horizontal inlet and inclined outlets, (2012) 188. K.C. Hong, S. Griston, Two-phase flow splitting at an impacting tee, SPE Prod. Facil. 10 (1995) 184–190. https://doi.org/10.2118/27866-PA. Yang, 2020, State-of-art of impacting T-junction : Phase separation, constituent separation and applications, Int. J. Heat Mass Transf., 148, 119067, 10.1016/j.ijheatmasstransfer.2019.119067 Memon, 2020, Experimental investigation of two-phase separation in T-Junction with combined diameter ratio, J. Nat. Gas Sci. Eng., 73, 103048, 10.1016/j.jngse.2019.103048 Yang, 2017, Phase Separation of Gas-Liquid Two-Phase Flows in Multi-tube T-Junction Separators, AIChE J., 63, 2285, 10.1002/aic.15552 Oranje, 1973, Condensate behavior in gas pipelines is predictable, Oil Gas J., 71, 39 Liang, 2016, Experimental investigation of phase split of gas–liquid two-phase flow through small holes at the pipe wall, Exp. Therm Fluid Sci., 76, 330, 10.1016/j.expthermflusci.2016.03.029 Mohamed, 2011, Experimental investigation of two-phase flow splitting in an equal-sided impacting tee junction with inclined outlets, Exp. Therm Fluid Sci., 35, 1193, 10.1016/j.expthermflusci.2011.04.006 Conte, 2003, Film thickness variation about a T-junction, Int. J. Multiph. Flow, 29, 305, 10.1016/S0301-9322(02)00130-1 Acrivos, 1959, Flow distributions in manifolds, Chem. Eng. Sci., 10, 112, 10.1016/0009-2509(59)80030-0 K.C. Hong, Two-Phase Flow Splitting At a Pipe Tee., JPT, J. Pet. Technol. 30 (1978) 290–296. https://doi.org/10.2118/6530-PA. L. Yang, B.J. Azzopardi, A. Belghazi, S. Nakanishi, Phase separation of liquid-liquid two-phase flow at a T-junction, AIChE J. 52 (2006) 141–149. https://doi.org/10.1002/aic.10589. M. Mohammadikharkeshi, R. Dabirian, R.S. Mohan, O. Shoham, Experimental Study and Modeling of Slug Dissipation in a Horizontal Enlarged Impacting Tee-Junction, SPE J. (2020) 22–26. https://doi.org/10.2118/190131-pa. Baker, 1953, Design of pipelines for the simultaneous flow of oil and gas, Soc. Pet. Eng. - Fall Meet. Pet. Branch AIME, FM, 10.2118/323-G Y. Taitel, A.E. Dukler, A model for predicting flow regime transitions in horizontal and near horizontal gas‐liquid flow, AIChE J. 22 (1976) 47–55. https://doi.org/10.1002/aic.690220105. Baker, 2008, Transient effects in gas–liquid phase separation at a pair of T-junctions, Chem. Eng. Sci., 63, 968, 10.1016/j.ces.2007.10.035 Mak, 2006, The split of vertical two-phase flow at a small diameter T-junction, Chem. Eng. Sci., 61, 6261, 10.1016/j.ces.2006.05.039 Wren, 2005, Slug flow in small diameter pipes and T-junctions, Exp. Therm Fluid Sci., 29, 893, 10.1016/j.expthermflusci.2005.01.004 Seeger, 1986, Two-phase flow in a T-junction with a horizontal inlet. Part I: Phase separation, Int. J. Multiph. Flow., 12, 575, 10.1016/0301-9322(86)90061-3 Azzopardi, 1982, The effect of flow patterns on two-phase flow in a T junction, Int. J. Multiph. Flow., 8, 491, 10.1016/0301-9322(82)90020-9 Azzopardi, 1983, The effect of the side arm diameter on the two-phase flow split at a “T”, junction., 10, 509 Shoham, 1989, Two-phase flow splitting in a horizontal reduced pipe tee, Chem. Eng. Sci., 44, 2388, 10.1016/0009-2509(89)85174-7 Azzopardi, 1992, Two-phase flow split at T junctions: Effect of side arm orientation and downstream geometry, Int. J. Multiph. Flow., 18, 861, 10.1016/0301-9322(92)90064-N Mudde, 1993, Two-phase flow redistribution phenomena in a large T-junction, Int. J. Multiph. Flow, 19, 563, 10.1016/0301-9322(93)90088-C S. Griston, J.H. Choi, P. Company, Two-Phase Flow Splitting at Side- B ranching Tees, (1998) 1–10. Reimann, 1986, G3/GI equal, 12, 587 Wren, 2004, The Phase Separation Capabilities of Two T-Junctions Placed in Series, Chem. Eng. Res. Des., 82, 364, 10.1205/026387604322870471 Tae, 2003, Two-phase flow distribution and phase separation through both horizontal and vertical branches, KSME Int. J., 17, 1211, 10.1007/BF03016516 Pao, 2017, Numerical simulation of two–phase separation in a small diameter ratio T-junction, Mat.-Wiss. u. Werkstofftech., 48, 255, 10.1002/mawe.201600769 Saieed, 2018, Effect of T-junction diameter ratio on stratified-wavy flow separation, J. Nat. Gas Sci. Eng., 51, 223, 10.1016/j.jngse.2018.01.015 Tran, 2018, Numerical simulation of two-phase separation in T-junction with experimental validation, J. Mech. Eng. Sci., 12, 4216, 10.15282/jmes.12.4.2018.17.0363 Memon, 2019, Experimental investigation of two-phase separation in a horizontal T-junction with vertical branch arm, J. Mech. Eng. Sci., 13, 5922, 10.15282/jmes.13.4.2019.14.0470 Pao, 2019, Numerical evaluation of separation efficiency in converging T-junction with slug flow, HFF, 30, 3515, 10.1108/HFF-07-2019-0524 Hwang, 1988, Phase separation in dividing two-phase flows, Am. Inst. Chem. Eng. Work., 14, 439 Hart, 1991, A model for predicting liquid route preference during gas—liquid flow through horizontal branched pipelines, Chem. Eng. Sci., 46, 1609, 10.1016/0009-2509(91)87009-2 J. Riemann, H.J. Brinkmann, R. Domanski, Gas-Liquid flow in dividing Tee-Junctions with a horizontal Inlet and different branch orientations and diameters, (1988) 187–229. https://doi.org/4 Z 72.70-4399. Buel, 1994, Two-phase pressure drop and phase distribution of a horizontal tee junction, Int. J. Multiph. Flow, 20, 819, 10.1016/0301-9322(94)90096-5 B.J. Azzopardi, S.B. Memory, The split of two-phase flow at a horizontal T-annular and stratified flow., 79 (1989) 3441–3453. F. Peng, M. Shoukri, A.M.C. Chan, Effect of branch orientation on annular two-phase flow in T-Junctions, J. Fluids Eng. Trans. ASME. 118 (1996) 166–171. https://doi.org/10.1115/1.2817496. Wren, 2004, Affecting the phase split at a large diameter T-junction by using baffles, Exp. Therm Fluid Sci., 28, 835, 10.1016/j.expthermflusci.2003.12.017 Pandey, 2006, Liquid–Liquid Two Phase Flow Through a Horizontal T-Junction, Chem. Eng. Res. Des., 84, 895, 10.1205/cherd05061 E.M.K. Wren, Geometric effects on phase split at a large diameter T-junction, Phd. Diss. (2001). Saieed, 2019, A multiphase flow loop design for investigating the partial phase separation in a pipe tee, Acta Polytech., 59, 399, 10.14311/AP.2019.59.0399 Pao, 2018, Numerical Investigation of Liquid Carryover in T-Junction with Different Diameter Ratios, IOP Conf. Ser. Mater. Sci. Eng., 328, 1, 10.1088/1757-899X/328/1/012007 T.M.N. Tengku-Bazli, W. Pao, Experimental Analyses on T-junction Geometry in Two Phase Flow, (2019). https://doi.org/10.13140/RG.2.2.19357.97762. Saieed, 2018 S.A. Abd-Hadi, W. Pao, Experimental Investigation of Liquid Carryover in Modified T-junction, (2019) 2–8. https://doi.org/10.13140/RG.2.2.26068.86406. M.N. Azad, W. Pao, CFD Simulation of Liquid Carryover in Hybrid Configuration of, (2019). https://doi.org/10.13140/RG.2.2.23984.81920. M. Ottens, H.C.J. Hoefsloot, P.J. Hamersma, Effect of small branch inclination on gas–liquid flow separation in T junctions, AIChE J. 45 (1999) 465–474. https://doi.org/10.1002/aic.690450304. N. Zhang, H. Li, Y. Zhang, Q. Deng, Y. Tan, A Numerical Simulation for the Determination of the Shunt Ratio at a T-Junction with Different Branch Angles, Viscosities, and Flow Rates, J. Energy Resour. Technol. Trans. ASME. 141 (2019). https://doi.org/10.1115/1.4043635. Frank, 2005, Numerical Simulation of Slug Flow Regime for an Air-Water Two-Phase Flow in Horizontal Pipes, 11th Int, Top. Meet. Nucl. React. Therm., 1 S. Ban, W. Pao, M.S. Nasif, Numerical simulation of two-phase flow regime in horizontal pipeline and its validation, Int. J. Numer. Methods Heat Fluid Flow. 28 (2018) 1279–1314. https://doi.org/10.1108/HFF-05-2017-0195. Mo, 2014, Quasi-3D Modelling of Two-Phase Slug Flow in Pipes, The Journal of Computational Multiphase Flows, 6, 1, 10.1260/1757-482X.6.1.1 Ghorai, 2006, CFD modeling of flow profiles and interfacial phenomena in two-phase flow in pipes, Chem. Eng. Process. Process Intensif., 45, 55, 10.1016/j.cep.2005.05.006 Lu, 2007, Experimental and Numerical Investigations on Horizontal Oil-Gas Flow, J. Hydrodyn., 19, 683, 10.1016/S1001-6058(08)60004-9 M. Lu, Experimental and computational study of two-phase slug flow, (2015).