A progress review of practical soot modelling development in diesel engine combustion

Blanquart, 2009, Chemical mechanism for high temperature combustion of engine relevant fuels with emphasis on soot precursors, Combustion and Flame, 156, 588, 10.1016/j.combustflame.2008.12.007 Boulanger, 2007, An improved soot formation model for 3D diesel engine simulations, Journal of Engineering for Gas Turbines and Power, 129, 877, 10.1115/1.2718234 Cheng, 2013, Study on soot formation characteristics in the diesel combustion process based on an improved detailed soot model, Energy Conversion and Management, 75, 1, 10.1016/j.enconman.2013.05.033 Cheng, 2014, Modeling study of soot formation and oxidation in DI diesel engine using an improved soot model, Applied Thermal Engineering, 62, 303, 10.1016/j.applthermaleng.2013.09.052 Dec, 1997 D'Anna, 2007, Effect of fuel/air ratio and aromaticity on sooting behavior of premixed heptane flames, Energy & Fuels, 21, 2655, 10.1021/ef070159y E, 2018, Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends, Energy, 149, 979, 10.1016/j.energy.2018.02.053 Frenklach, 1991, Detailed modeling of soot particle nucleation and growth, Symposium (International) on Combustion, 23, 1559, 10.1016/S0082-0784(06)80426-1 Fusco, 1994, Application of a phenomenological soot model for diesel engine combustion Hiroyasu, 1983, Development and use of a spray combustion modeling to predict diesel engine efficiency and pollutant emissions: part 1 combustion modeling, Bulletin of the JSME, 26, 569, 10.1299/jsme1958.26.569 Jia, 2009, Numerical investigation of soot reduction potentials with diesel homogeneous charge compression ignition combustion by an improved phenomenological soot model, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 223, 395 Kazakov, 1998 Kazakov, 1995, Detailed modeling of soot formation in laminar premixed ethylene flames at a pressure of 10 bar, Combustion and Flame, 100, 111, 10.1016/0010-2180(94)00086-8 Leung, 1991, A simplified reaction mechanism for soot formation in nonpremixed flames, Combustion and Flame, 87, 289, 10.1016/0010-2180(91)90114-Q Li, 2020, Multiple-objective optimization of methanol/diesel dual-fuel engine at low loads: a comparison of reactivity controlled compression ignition (RCCI) and direct dual fuel stratification (DDFS) strategies, Fuel, 262, 116673, 10.1016/j.fuel.2019.116673 Liu, 2005 Liu, 2017, Experimental and modeling investigations on soot formation of ethanol, n-Butanol, 2,5-Dimethylfuran, and biodiesel in diesel engines, Energy & Fuels, 31, 12108, 10.1021/acs.energyfuels.7b01622 Lv, 2019, Development of a reduced diesel/PODEn mechanism for diesel engine application, Energy Conversion and Management, 199, 112070, 10.1016/j.enconman.2019.112070 Mandatori, 2011, Soot formation in laminar ethane diffusion flames at pressures from 0.2 to 3.3 MPa, Proceedings of the Combustion Institute, 33, 577, 10.1016/j.proci.2010.06.004 Mosbach, 2009, Towards a detailed soot model for internal combustion engines, Combustion and Flame, 156, 1156, 10.1016/j.combustflame.2009.01.003 Moss, 1994 Moss, 1995, Modeling soot formation and burnout in a high temperature laminar diffusion flame burning under oxygen-enriched conditions, Combustion and Flame, 101, 491, 10.1016/0010-2180(94)00233-I Nagle, 1962, Oxidation of carbon between 1000–2000 °C, Proceedings of the Fifth Conference on Carbon, 154, 10.1016/B978-0-08-009707-7.50026-1 Neoh, 1985, Effect of oxidation on the physical structure of soot, Symposium (International) on Combustion, 20, 951, 10.1016/S0082-0784(85)80584-1 Omidvarborna, 2015, Recent studies on soot modeling for diesel combustion, Renewable and Sustainable Energy Reviews, 48, 635, 10.1016/j.rser.2015.04.019 Pang, 2013, Development of a phenomenological soot model coupled with a skeletal pah mechanism for practical engine simulation, Energy & Fuels, 27, 1699, 10.1021/ef400033f Park, 2010, Numerical investigation of combustion and exhaust emissions characteristics based on experimental spray and atomization characteristics in a compression ignition diesel engine, Energy & Fuels, 24, 2429, 10.1021/ef901211d Patterson, 2007, Models for the aggregate structure of soot particles, Combustion and Flame, 151, 160, 10.1016/j.combustflame.2007.04.012 Ren, 2019, Development of a reduced polyoxymethylene dimethyl ethers (PODEn) mechanism for engine applications, Fuel, 238, 208, 10.1016/j.fuel.2018.10.111 Skeen, 2010, Characteristics of non-premixed oxygenen hanced combustion: II. flame structure effects on soot precursor kinetics resulting in soot-free flames, Combustion and Flame, 157, 1745, 10.1016/j.combustflame.2010.04.013 Slavinskaya, 2009, A modelling study of aromatic soot precursors formation in laminar methane and ethene flames, Combustion and Flame, 156, 1705, 10.1016/j.combustflame.2009.04.013 Su, 2012, Effects of mixing and chemical parameters on thermal efficiency in a partly premixed combustion diesel engine with near-zero emissions, International Journal of Engine Research, 13, 188, 10.1177/1468087412438177 Surovikin, 1976, Analytical description of the processes of nucleus-formation and growth of particles of carbon black in the thermal decomposition of aromatic hydrocarbons in the gas phase, Solid Fuel Chemistry, 10, 92 Tao, 2001, Application of complex chemistry to investigate combustion zone structue of DI diesel spray under engine-like conditions Tao, 2004, A phenomenological model for the prediction of soot formation in diesel spray combustion, Combustion and Flame, 136, 270, 10.1016/j.combustflame.2003.11.001 Tao, 2005, Comparison of three soot models applied to multi-dimensional diesel combustion simulations, JSME International Journal Series B Fluids and Thermal Engineering, 48, 671, 10.1299/jsmeb.48.671 Tao, 2007, Characterization of soot particle distribution in conventional, non-premixed DI diesel flame using a multi-step phenomenological soot model, Proceedings of the Combustion Institute, 31, 2991, 10.1016/j.proci.2006.08.005 Tao, 2009, Nine-step phenomenological diesel soot model validated over a wide range of engine conditions, International Journal of Thermal Sciences, 48, 1223, 10.1016/j.ijthermalsci.2008.08.014 Tesner, 1971, Kinetics of dispersed carbon formation, Combustion and Flame, 17, 253, 10.1016/S0010-2180(71)80168-2 Vishwanathan, 2009, Modeling soot formation using reduced polycyclic aromatic hydrocarbon chemistry in n-Heptane lifted flames with application to low temperature combustion, Journal of Engineering for Gas Turbines and Power, 131, 1, 10.1115/1.3043806 Vishwanathan, 2015, Application of a semi-detailed soot modeling approach for conventional and low temperature diesel combustion – part I: model performance, Fuel, 139, 757, 10.1016/j.fuel.2014.08.026 Vishwanathan, 2015, Application of a semi-detailed soot modeling approach for conventional and low temperature diesel combustion – part II: model sensitivity, Fuel, 139, 771, 10.1016/j.fuel.2014.08.025 Wang, 2011, Formation of nascent soot and other condensed-phase materials in flames, Proceedings of the Combustion Institute, 33, 41, 10.1016/j.proci.2010.09.009 Wang, 2014, Development of a reduced n-dodecane-PAH mechanism and its application for n-dodecane soot predictions, Fuel, 136, 25, 10.1016/j.fuel.2014.07.028 Witkowski, 2013, Evaluation of the sooting properties of real fuels and their commonly used surrogates in a laminar co-flow diffusion flame, Combustion and Flame, 160, 1129, 10.1016/j.combustflame.2013.01.027 Yu, 2016, Development of a three-step hybrid simulation approach (THSA) for engine combustion investigation coupled with a multistep phenomenon soot model and energy balance analysis, Applied Energy, 185, 482 Zhang, 2009, Fuel dependence of benzene pathways, Proceedings of the Combustion Institute, 32, 377, 10.1016/j.proci.2008.06.011 Zhao, 2015, Computational investigation of oxygen concentration effects on a soot mechanism with a phenomenological soot model of Acetone−Butanol−Ethanol (ABE), Energy & Fuels, 29, 1710, 10.1021/ef502433d Zhao, 2016, Sensitivity study of engine soot forming using detailed soot modelling oriented in soot surface growth dynamic, Fuel, 168, 81, 10.1016/j.fuel.2015.10.092 Zhao, 2017, Numerical modelling of soot formation and oxidation using phenomenological soot modelling approach in a dual-fueled compression ignition engine, Fuel, 188, 382, 10.1016/j.fuel.2016.10.054 Zhao, 2018, Numerical study of soot particles from low temperature combustion of engine fueled with diesel fuel and unsaturation biodiesel fuels, Applied Energy, 211, 187, 10.1016/j.apenergy.2017.11.056