A priori evaluation of the printability of water-based anode dispersions in inkjet printing

Wijshoff H (2010) The dynamics of the piezo inkjet printhead operation. Phys Rep. https://doi.org/10.1016/j.physrep.2010.03.003 Abbel R, Teunissen P, Rubingh E, van Lammeren T, Cauchois R, Everaars M et al (2014) Industrial-scale inkjet printed electronics manufacturing - production up-scaling from concept tools to a roll-to-roll pilot line. Transl Mater Res. https://doi.org/10.1088/2053-1613/1/015002 Yang Y, Yuan W, Zhang X, Yuan Y, Wang C, Ye Y et al (2020) Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries. Appl Energy. https://doi.org/10.1016/j.apenergy.2019.114002 Delannoy PE, Riou B, Brousse T, Le Bideau J (2015) Ink-jet printed porous composite \(\rm LiFePO_{4}\) electrode from aqueous suspension for microbatteries. J Power Sources. https://doi.org/10.1016/j.jpowsour.2015.04.067 Huang J, Yang J, Li W, Cai W, Jiang Z (2008) Electrochemical properties of \(\rm LiCoO_{2}\) thin film electrode prepared by ink-jet printing technique. Thin Solid Films. https://doi.org/10.1016/j.tsf.2007.09.039 Zhao Y, Zhou Q, Liu L, Xu J, Yan M, Jiang Z (2006) A novel and facile route of ink-jet printing to thin film \(\rm SnO_{2}\) anode for rechargeable lithium ion batteries. Electrochim Acta. https://doi.org/10.1016/j.electacta.2005.07.050 Zhang F, Wei M, Viswanathan VV, Swart B, Shao Y, Wu G et al (2017) 3D printing technologies for electrochemical energy storage. Nano Energy. https://doi.org/10.1016/j.nanoen.2017.08.037 Tian X, Jin J, Yuan S, Chua CK, Tor SB, Zhou K (2017) Emerging \(\rm 3D-\)printed electrochemical energy storage devices: a critical review. Adv Energy Mater. https://doi.org/10.1002/aenm.201700127 Hawes GF, Rehman S, Rangom Y, Pope MA (2022) Advanced manufacturing approaches for electrochemical energy storage devices. Int Mater Rev. https://doi.org/10.1080/09506608.2022.2086388 Derby B, Reis N (2003) Inkjet printing of highly particulate suspensions. MRS Bull. https://doi.org/10.1557/mrs2003.230 Clasen C, Philipps PM, Palangetic L, Vermant AJ (2012) Dispensing of rheologically complex fluids: the map of misery. AIChE J. https://doi.org/10.1002/aic.13704 Jang D, Kim D, Moon J (2009) Influence of fluid physical properties on ink-jet printability. Langmuir. https://doi.org/10.1021/la900059m Fromm JE (1984) Numerical calculation of the fluid dynamics of drop-on-demand jets. IBM J Res Dev. https://doi.org/10.1147/rd.283.0322 Derby B (2010) Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annu Rev Mater Res. https://doi.org/10.1146/annurev-matsci-070909-104502 Polsakiewicz DA, Kollenberg W (2011) Highly loaded alumina inks for use in a piezoelectric print head. Materialwiss Werkstofftech. https://doi.org/10.1002/mawe.201100780 Reis N, Derby B (2000) Ink jet deposition of ceramic suspensions: Modeling and experiments of droplet formation. Mat Res Soc Symp Proc. https://doi.org/10.1557/PROC-625-117 Zhong Y, Fang H, Ma Q, Dong X (2018) Analysis of droplet stability after ejection from an inkjet nozzle. J Fluid Mech. https://doi.org/10.1017/jfm.2018.251 Liu Y, Derby B (2019) Experimental study of the parameters for stable drop-on-demand inkjet performance. Phys Fluids 31(3):032004 Aqeel AB, Mohasan M, Lv P, Yang Y, Duan H (2019) Effects of nozzle and fluid properties on the drop formation dynamics in a drop-on-demand inkjet printing. Appl Math Mech. https://doi.org/10.1007/s10483-019-2514-7 Lehmann M, Kolb CG, Klinger F, Zaeh MF (2021) Preparation, characterization, and monitoring of an aqueous graphite ink for use in binder jetting. Mater Des. https://doi.org/10.1016/j.matdes.2021.109871 Hoath SD (2016) Fundamentals of inkjet printing: the science of inkjet and droplets. Wiley, Hoboken Rioboo R, Marengo M, Tropea C (2002) Time evolution of liquid drop impact onto solid, dry surfaces. Exp Fluids. https://doi.org/10.1007/s00348-002-0431-x Josserand C, Thoroddsen ST (2016) Drop impact on a solid surface. Annu Rev Fluid Mech 48:365–391 Prabhu KN, Fernandes P, Kumar G (2009) Effect of substrate surface roughness on wetting behaviour of vegetable oils. Mater Des. https://doi.org/10.1016/j.matdes.2008.04.067 Kolb CG, Lehmann M, Kriegler J, Lindemann BAJL, Zaeh MF (2022) Qualifying water-based electrode dispersions for the inkjet printing process: a requirements analysis. Rapid Prototyp J. https://doi.org/10.1108/RPJ-01-2022-0026 Kolb CG, Lehmann M, Kulmer D, Zaeh MF (2022) Modeling of the stability of water-based graphite dispersions using polyvinylpyrrolidone on the basis of the DLVO theory. Heliyon. https://doi.org/10.1016/j.heliyon.2022.e11988 Kolb C, Lehmann M, Lindemann JL, Bachmann A, Zaeh M (2021) Improving the dispersion behavior of organic components in water-based electrode dispersions for inkjet printing processes. Appl Sci. https://doi.org/10.3390/app11052242 Bresser D, Buchholz D, Moretti A, Varzi A, Passerini S (2018) Alternative binders for sustainable electrochemical energy storage—the transition to aqueous electrode processing and bio-derived polymers. Energy Environ Sci. https://doi.org/10.1039/C8EE00640G Wenzel V, Nirschl H, Nötzel D (2015) Challenges in lithium-ion-battery slurry preparation and potential of modifying electrode structures by different mixing processes. Energy Technol. https://doi.org/10.1002/ente.201402218 Kulicke WM, Clasen C, Lohman C (2005) Characterization of water-soluble cellulose derivatives in terms of the molar mass and particle size as well as their distribution. Macromol Symp 223:151–174 Gulbinska MK (2014) Lithium-ion battery materials and engineering: current topics and problems from the manufacturing perspective. Springer, London Haselrieder W, Westphal B, Bockholt H, Diener A, Hoeft S, Kwade A (2015) Measuring the coating adhesion strength of electrodes for lithium-ion batteries. Int J Adhes Adhes 60:1–8 Bridel JS, Azais T, Morcrette M, Tarascon JM, Larcher D (2010) Key parameters governing the reversibility of Si/Carbon/CMC electrodes for Li-ion batteries. Chem Mater 22:1229–1241 Traube J (1891) Über die C apillaritätsconstanten organischer Stoffe in wässerigen L ösungen. Justus Liebigs Ann Chem. https://doi.org/10.1002/jlac.18912650103 Tadros TF (2011) Rheology of dispersions: principles and applications. Wiley, Hoboken Barnes HA (2000) A handbook of elementary rheology. University of Wales, Institute of Non-Newtonian Fluid Mechanics, Wales Lestriez B (2010) Functions of polymers in composite electrodes of lithium ion batteries. C R Chim. https://doi.org/10.1016/j.crci.2010.01.018 Malkin AY, Isayev AI (2017) Rheology: concepts, methods, and applications. ChemTech Publishing, Scarborough Benchabane A, Bekkour K (2008) Rheological properties of carboxymethyl cellulose ( CMC ) solutions. Colloid Polym Sci. https://doi.org/10.1007/s00396-008-1882-2 Shaughnessy EJ, Katz IM, Schaeffer JP (2005) Introduction to fluid dynamics. Oxford University Press, New York Carnicer V, Alcázar MJ, Sánchez E, Moreno R (2021) Microfluidic rheology: a new approach to measure viscosity of ceramic suspensions at extremely high shear rates. Open Ceram. https://doi.org/10.1016/j.oceram.2020.100052 Jeschull F, Brandell D, Wohlfahrt-Mehrens M, Memm M (2017) Water-soluble binders for lithium-ion battery graphite electrodes: slurry rheology, coating adhesion, and electrochemical performance. Energy Technol. https://doi.org/10.1002/ente.201700200 Lanceros-Méndez S, Costa CM (2018) Printed batteries: materials, technologies and applications. Wiley, Hoboken Abdelrahim KA, Ramaswamy HS, Doyon G, Toupin C (1994) Effects of concentration and temperature on carboxymethylcellulose rheology. Int J Food Sci. https://doi.org/10.1111/j.1365-2621.1994.tb02066.x Kwon YI, Kim JD, Song YS (2015) Agitation effect on the rheological behavior of lithium-ion battery slurries. J Electron Mater 44:474–481. https://doi.org/10.1007/s11664-014-3349-1 Herschel WH, Bulkley R (1926) Konsistenzmessungen von Gummi-Benzollösungen. Kolloid-Zeitschrift. https://doi.org/10.1007/BF01432034 He P, Wang H, Qi L, Osaka T (2006) Synthetic optimization of spherical LiCoO2 and precursor via uniform-phase precipitation. J Power Sources 158:529–534 Murshed SS, Tan S, Nguyen NT (2008) Temperature dependence of interfacial properties and viscosity of nanofluids for droplet-based microfluidics. J Phys D Appl Phys. https://doi.org/10.1088/0022-3727/41/8/085502 Radiom M, Yang C, Chan WK (2010). Characterization of surface tension and contact angle of nanofluids. In: 4th international conference on experimental mechanics. https://doi.org/10.1117/12.851278 Tanvir S, Qiao L (2012) Surface tension of nanofluid-type fuels containing suspended nanomaterials. Nanoscale Res Lett. https://doi.org/10.1186/1556-276X-7-226 Bhuiyan MHU, Saidur R, Mostafizur RM, Mahbubul IM, Amalina MA (2015) Experimental investigation on surface tension of metal oxide-water nanofluids. Int Commun Heat Mass Transf. https://doi.org/10.1016/j.icheatmasstransfer.2015.01.002 Phan-Thien N, Mai-Duy N (2013) Understanding viscoelasticity: an introduction to rheology. Springer, Berlin Rapp BE (2016) Microfluidics: modeling, mechanics and mathematics. Elsevier, Amsterdam Alamán J, Alicante R, Peña JI, Sánchez-Somolinos C (2016) Inkjet printing of functional materials for optical and photonic applications. Materials. https://doi.org/10.3390/ma9110910 Haque RI, Vié R, Germainy M, Valbin L, Benaben P, Boddaert X (2015) Inkjet printing of high molecular weight PVDF-TrFE for flexible electronics. Flex Print Electron. https://doi.org/10.1088/2058-8585/1/1/015001 Huesker J, Froböse L, Kwade A, Winter M, Placke T (2017) In situ dilatometric study of the binder influence on the electrochemical intercalation of bis (trifluoromethanesulfonyl) imide anions into graphite. Electrochim Acta. https://doi.org/10.1016/j.electacta.2017.10.042 Huang Y, Jiang L, Li B, Premaratne P, Jiang S, Qin H (2020) Study effects of particle size in metal nanoink for electrohydrodynamic inkjet printing through analysis of droplet impact behaviors. J Manuf Process. https://doi.org/10.1016/j.jmapro.2020.04.021 Tsai MH, Hwang WS, Chou HH, Hsieh PH (2008) Effects of pulse voltage on inkjet printing of a silver nanopowder suspension. Nanotechnology. https://doi.org/10.1088/0957-4484/19/33/335304 An SM, Lee SY (2012) Maximum spreading of a shear-thinning liquid drop impacting on dry solid surfaces. Exp Therm Fluid Sci. https://doi.org/10.1016/j.expthermflusci.2011.12.003 Fu K, Wang Y, Yan C, Yao Y, Chen Y, Dai J et al (2016) Graphene oxide-based electrode inks for 3D-printed lithium-ion batteries. Adv Mater 28(13):2587–2594 Scheller BL, Bousfield DW (1995) Newtonian drop impact with a solid surface. AIChE J. https://doi.org/10.1002/aic.690410602 Wenzel RN (1949) Surface roughness and contact angle. J Phys Chem. https://doi.org/10.1021/j150474a015 Saulick Y, Lourenco SDN, Baudet BA (2017) A semi-automated technique for repeatable and reproducible contact angle measurements in granular materials using the sessile drop method. Soil Sci Soc Am J. https://doi.org/10.2136/sssaj2016.04.0131 Billot N, Beyer M, Koch N, Ihle C, Reinhart G (2021) Development of an adhesion model for graphite-based lithium-ion battery anodes. J Manuf Syst 58:131. https://doi.org/10.1016/j.jmsy.2020.10.016 Kwok DY, Neumann AW (1999) Contact angle measurement and contact angle interpretation. Adv Colloid Interface Sci. https://doi.org/10.1016/S0001-8686(98)00087-6