A prediction model of artificial neural networks in development of thermoelectric materials with innovative approaches

Najafi, 2013, Optimization of a cooling system based on Peltier effect for photovoltaic cells, Sol. Energy, 91, 152, 10.1016/j.solener.2013.01.026 Felgner, 2014, Component-oriented modeling of thermoelectric devices for energy system design, IEEE Trans. Ind. Electron., 61, 1301, 10.1109/TIE.2013.2261037 Kim, 2011, Computational study of the Seebeck coefficient of one-dimensional composite nano-structures, J. Appl. Phys., 110, 10.1063/1.3619855 Dresselhaus, 2009, New composite thermoelectric materials for energy harvesting applications, J. Miner. Met. Mater. Soc., 61, 86, 10.1007/s11837-009-0058-y Kim, 2013, Analysis and modeling of effective temperature differences and electrical parameters of thermoelectric generators, Appl. Energy, 102, 1458, 10.1016/j.apenergy.2012.09.006 Martin, 2010, High temperature Seebeck coefficient metrology, J. Appl. Phys., 108, 1, 10.1063/1.3503505 Gou, 2010, Modeling, experimental study and optimization on low-temperature waste heat thermoelectric generator system, Appl. Energy, 87, 3131, 10.1016/j.apenergy.2010.02.013 Ramos, 2014, The thermoelectric figure of merit for the single electron transistor, Int. J. Therm. Sci., 86, 387, 10.1016/j.ijthermalsci.2014.07.018 Chubilleau, 2014, Thermoelectric properties of In0.2Co4Sb12 skutterudites with embedded PbTe or ZnO nanoparticles, J. Alloys Compd., 589, 513, 10.1016/j.jallcom.2013.11.204 Düğenci, 2015, Creep modelling of polypropylenes using artificial neural networks trained with Bee algorithms, Eng. Appl. Artif. Intell., 45, 71, 10.1016/j.engappai.2015.06.016 I. Kaastra, M. Boyd, Designing a neural network for forecasting financial and economic time series, 10 (1996) 215–236. Haykin, 1999 G. Zhang, B.E. Patuwo, M.Y. Hu, Forecasting with artificial neural networks : The state of the art, 14 (1998) 35–62. Caglar, 2009, Neural network based approach for determining the shear strength of circular reinforced concrete columns, Constr. Build. Mater., 23, 3225, 10.1016/j.conbuildmat.2009.06.002 Gurney, 1997 Gazali, 2018, Prediction of generated power from steam turbine waste heat recovery mechanism system on naturally aspirated spark ignition engine using artificial neural network, Soft Comput., 22, 5955, 10.1007/s00500-017-2873-3 Ricardo, 2014, Use of artificial neural networks for prediction of convective heat transfer in evaporative units, Ing. Investig. Tecnol., 15, 93 Derebasi, 2015, Influence of geometrical factors on performance of thermoelectric material using numerical methods, J. Electron. Mater., 44, 10, 10.1007/s11664-015-3657-0 Uysal, 2017, Estimating seebeck coefficient of a p-type high temperature thermoelectric material using bee algorithm multi-layer perception, J. Electron. Mater., 46, 10.1007/s11664-017-5497-6 Ciylan, 2011, Determination of output parameters of a thermoelectric module using artificial neural networks, Elektron. Ir Elektrotechnika, 10, 63 Ozturk, 2017, Development of extraction techniques for dielectric constant from free-space measured S-parameters between 50 and 170 GHz, J. Mater. Sci. Mater. Electron., 28, 11543, 10.1007/s10854-017-6953-z Qi, 2011, Fabrication and characterization of Ca 3Co 4O 9 nanoparticles by sol-gel method, Rare Met., 30, 111, 10.1007/s12598-011-0250-4 Peng, 2003, Nitrate-citrate combustion synthesis and properties of Ce 1-xCaxO2-x solid solutions, Mater. Chem. Phys., 82, 509, 10.1016/S0254-0584(03)00371-7 Shivakumara, 2017, Photoluminescence and photocatalytic properties of Eu3+-doped ZnO nanoparticles synthesized by the nitrate-citrate gel combustion method, Eur. Phys. J. Plus, 132, 10.1140/epjp/i2017-11304-5 K.A. Borup, J. De Boor, H. Wang, F. Drymiotis, B.B. Iversen, G. Je, Environmental Science Measuring thermoelectric transport properties of materials, (2015) 423–435. DOI:10.1039/C4EE01320D. Atkins, 2005 Kayabasi, 2017, Determination of cutting parameters for silicon wafer with a Diamond Wire Saw using an artificial neural network, Sol. Energy, 149, 285, 10.1016/j.solener.2017.04.022 Wang, 2009, Comparison of the high temperature thermoelectric properties for Ag-doped and Ag-added Ca3Co4O9, J. Alloys Compd., 477, 817, 10.1016/j.jallcom.2008.10.162 Park, 2013, Enhanced high-temperature thermoelectric properties of Ce- and Dy-doped ZnO for power generation, Energy, 54, 139, 10.1016/j.energy.2013.03.023 Simsir, 2018, Anode performance of hydrothermally grown carbon nanostructures and their molybdenum chalcogenides for Li-ion batteries, MRS Commun., 8, 610, 10.1557/mrc.2018.71 Kayabasi, 2018, Prediction of nano etching parameters of silicon wafer for a better energy absorption with the aid of an artificial neural network, Sol. Energy Mater. Sol. Cells, 188, 234, 10.1016/j.solmat.2018.08.027